Hi
Here are my Spezifcation:
HTC HD2 512MB flash
ROM:1.66.407.1 German
Hard SPL: 2.08 HSPL
Radio Rom: 2.15.50.14
My Problem is, i can not wipe my NAND with Task29.
I read the instructions and done all steps till the Phone Restarts, but after the the restart my phone freeez at the HSPL Screen and don`t move.
I See This on my Phone:
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
At the PC a have the folling Mesage:
Error [266]: Update Error
the Update Utility canot get response from your PDA Phone. Pleas check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone.
I have tryid this Step a few times, but its allways the same.
I try it with MAGLDR113 and with Easy Android.
Have anyone of you any Idee where the Problem is?
SanDiskFormat said:
Hi
Here are my Spezifcation:
HTC HD2 512MB flash
ROM:1.66.407.1 German
Hard SPL: 2.08 HSPL
Radio Rom: 2.15.50.14
My Problem is, i can not wipe my NAND with Task29.
I read the instructions and done all steps till the Phone Restarts, but after the the restart my phone freeez at the HSPL Screen and don`t move.
I See This on my Phone:
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
At the PC a have the folling Mesage:
Error [266]: Update Error
the Update Utility canot get response from your PDA Phone. Pleas check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone.
I have tryid this Step a few times, but its allways the same.
I try it with MAGLDR113 and with Easy Android.
Have anyone of you any Idee where the Problem is?
Click to expand...
Click to collapse
You have to enter Boot-loader mode. To do turn off the phone then press Vol down + Power button. Keep holding until you see the Tri-color screen, it's the boot-loader mode.
Connect your USB cable and you should see on the bottom the serial changed to USB.
Then open the task29 and follow instructions.
Turn on activesync usb connection under settnigs (depending on what you have now). and turn off the anti-virus.
If I solve the problem, please don't forget to thank.
The problem was with my PC... I dont know why but, i used the Laptop of my Girlfried make the MAGLDR113 run and all done.
Related
Brand new HD2 that was flashed with SPL 2.08.0000 using HSPL3. Every time I try to flash a cooked rom or radio it gives me Communication Error [262] (USB Error) while stuck on 0% on computer and phone. USB works fine since the phone gets recognized by Vista without any problems. Tried different usb ports and different cables but no success. I tried running HSPL 3 again to flash with SPL 2.08.HSLP but I get the following error:
CRITICAL ERROR
Flow: 00000006
Error code: 00000000
Description: Unknown
Currently the bootloader screen shows the following:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
The phone itself is still working. Any ideas how to remedy this?
Thank You!
basic error.
2.08.0000 is stock. run hspl3 again but this time choose 2.08.hspl from the dropdown.
Thank You, for the reply!
This is what I get when running HSPL 3:
CRITICAL ERROR
Flow: 00000001
Error Code: 00000002
Description: USB Connect Failed!
It the same time when connected in widows it syncs on the same usb port with the same cable...
1 - boot into bootloader manually first, then connect usb, then run hspl.
2 - use a usb port around back of the pc, not one built into the front or top, keep trying till you have tried all ports.
3 - always right click hspl and choose run as administrator, even if you are logged in as administrator.
Ran HSPL while in the bootloader on a different machine (xp pro) and it worked just fine.
Thank U!
how do u get into bootloader i have that same issue im a noob at this
qsue47 said:
how do u get into bootloader i have that same issue im a noob at this
Click to expand...
Click to collapse
power off, , press and hold and keep holding volume down, , tap and release power. Keep holding volume down till you get to stripey screen. Thats bootloader.
samsamuel said:
basic error.
2.08.0000 is stock. run hspl3 again but this time choose 2.08.hspl from the dropdown.
Click to expand...
Click to collapse
Thanks man! I was beginning to think I bricked my HD2. Now only my USB-problem is left...
Started out with SPL-2.10. converted it into SPL-2.08.0000 using HSPL3_pkg
I want to use NAND which requires 2.08.HSPL ....
Started the conversion from SPL-2.08.000 into 2.08.HSPL...
I check the tricolor boot page...the ff comes up after conversion:
PB81120 HX-B3
SPL-2.08.000 8G XE
Tried to a number of times with no success..(as admin) (it even says "successful Hack!" with "2.08.HSPL" drop down chosen from the HSPL3 program...
can some1 help...thnks in advance!
Michael// said:
Started out with SPL-2.10. converted it into SPL-2.08.0000 using HSPL3_pkg
I want to use NAND which requires 2.08.HSPL ....
Started the conversion from SPL-2.08.000 into 2.08.HSPL...
I check the tricolor boot page...the ff comes up after conversion:
PB81120 HX-B3
SPL-2.08.000 8G XE
Tried to a number of times with no success..(as admin) (it even says "successful Hack!" with "2.08.HSPL" drop down chosen from the HSPL3 program...
can some1 help...thnks in advance!
Click to expand...
Click to collapse
In any case, if you had the 2.10 bootloader on t mobile version, you would just check the 2.08 HSPL option instead of the regular 2.08 option.
Here is the guide to install HARDSPL for T Mobile USA Version HD2.
http://forum.xda-developers.com/showthread.php?t=653614
There is also a link near the top if you have the european version HD2 which uses a different HSPL software.
Re read the stickies on the forums, its step by step.
After you have the 2.08 HSPL you can then flash MAGLDR for NAND.
Also make sure you boot into windows mobile and plug in your phone so Mobile device center or active-sync can install all the necessary drivers for your phone!!
hi All
after installing ROMupdateutility.exe to my HD2 ,while restarting to get the black screen that have 9 choice but i didnt get this black screen and its stopped in HTC logo white screen,
whats wrong with this and what i have to do?
thanks alot.
I f you install no rom that's a bit normal
When you start your phone, push the power button and hold it until you get the menu.
i didnt get it yet, its 5 minutes
thanks,
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Beany69 said:
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Click to expand...
Click to collapse
its 2.o8
Sent from my HTC Desire using XDA App
Problem with maglder
Hi
I am trying to install Magldr on my HTC HD2, SPL 2.08, however i am getting the following error message everytime MagLdr (RomUpdateUtility) restarts my phone to upload the new version,
"ERROR [266]: UPDATE ERROR
The update utility cannot get response from your PDA phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone."
Dont know why it shows this message, I checked all the connections, the SPL shows connected to USB, my Windows 7, 64bit also dectects it, but I am still getting this message. please help
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Beany69 said:
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Click to expand...
Click to collapse
thanks Beany69, Not sure, I am new to this thing, right, let me tell you extactly what it shows when I start my phone in boot mode or what ever its called i.e. when I press the downkey with green button
"PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40"
is this HSPL, if not how do I upgrade this it the required HSPL., please
and when I run the RomUpdateUtility.exe on my pc, it checks the current version displays it as "Miri"
Hello, I'm trying to flash my friends stock HD2 with
[11JAN'12][ZIP] ★★★★HyperDroid-CM7-v5.7.0[a2sd][CyanogenMod7 LEO 2.3.7][fikret-r1.15] http://forum.xda-developers.com/showthread.php?t=769026
I can't figure out what I'm doing wrong and I need help.
Some info on the HD 2 I'm trying to flash:
OS version: 5.2.21913 (21913.5.0.94)
ROM size: 512 MB
ROM version: 3.14.409.2 (04666) NOR
Radio: 2.15.50.14 (Stock)
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
When I connect the phone to my PC with microUSB the white square in bootloader changes from SERIAL to USB, but WMDC on PC says Not Connected.
When the phone is turned on and in Windows Mobile, WMDC says Connected, and I can browse the files on the phone from my PC.
MAGDLR finds the phone and says update from Image Version 3.14.409.2 to Image Version 2.00.000.0. When I click next the phone boots into bootloader mode and then the percentage bar show up on both PC and phone. The bar does not move, stays at 0% for 5 minutes until MAGLDR times out.
I have tried with 3 different PCs (Windows 7 x86 and x64 and Vista x86), 2 different USB cables. Antivirus is disabled, and I run MAGLDR in admin mode. I also tried MAGLDR111. Same result on all. 0%
Any takers?
you need hspl 2.08.
If you have installed this, you magldr flash will go ahead
Haven't I already got hspl 2.08
klorin said:
...
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
...
Click to expand...
Click to collapse
No, this is SPL.
take HSPL 2.08 from menu..
With HSPL4 you have different Bootloader.. take the right one
its the last 4 digits that are the telltale, , if an spl ends 0000 its stock, if it ends hspl its, , ,wait for it, , HSPL!
Make sure your Phone is loaded for min 50% better is 100%!!
In 3 Color Bootloader Menu you must have USB Connection!!
In HSPL4 you choose 2.08.HSPL,this is the right one.
Now you follow the description of the Programm.
At least on your Phone you can read a notification like "We hacked it".
Congratulation you have HSPL 2.08 ;-))
Hi, i see this:
PB81100 HX-BC
SPL-2.0.8.0000 8G XE
MicroP(LED) 0x05
And i can go further, if i insert a stock rom in SD rename to leoimg.nbh it is stuck on "loading..."
any help?
I try to flash hspl but nothing happens for hours....
what version of hspl did you flash?
an what type hd2 do you have(tmous or eu)????
i've tried 2.08 and above... but always stuck on animation of bar going left and right, i left it for 2 hours, but nothing happens!
plz help!! Is my hd2 bricked?
Don't think so, from what I know you have to flash the wrong radio ver on tmous handsets to brick them...
Have a read here..
http://forum.xda-developers.com/showthread.php?t=1090783
Have to go out now back later..
i've downloaded the unified tool, but nothing works!
Better use the hd2 nand tookit (link in above link)
what happens when you power on an hold the vol down button...do you get a three-color screen?
yes with those infos:
PB81100 HX-BC
SPL-2.0.8.0000 8G XE
MicroP(LED) 0x05
so?
Try the hd2 nand toolkit and select install hspl and follow instructions.
When you plug usb into phone it should say usb on the tri-color screen.
I've tried. The bar of loading goes around but The hspl won't install. I will try again now
The same again. Nothing change.
so it recognised the phone tried to install, and did it give an error..??
What version did you select ?
i tried 2.08 hspl and others, but stuck on bars loading back and forward and even after two hours nothing happens... i'm desperate...
Only other thing I can think of is check that your anti-virus is not blocking it , actually turn it off and try again....
i've disabled real time protection and tried...nothing.
i dunno what to do more...
mrmcphisto77 said:
i've disabled real time protection and tried...nothing.
i dunno what to do more...
Click to expand...
Click to collapse
Disable completely ...to make sure..
i've a mac at home and i'm trying now with a vmware machine... with no AV, tomorrow i'll try on a laptop with wxp installed...
But now, no success with the wxp vmware, without AV. Same behaviour of a "direct" wxp installation.
should active sync accept incoming usb connections?
To install any SPL or HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
First go to here to download HSPL 4. I suggest HSPL 4 because it supports all SPL versions that are out right now including SPL 3.03.0000 and SPL 3.10.0000. Remember you can also use HSPL 4 to flash back to your original SPL. Once you have HSPL 4 downloaded use a zip program like WinZip, WinRar, or Win7 to extract the .exe file for the DFT installation utility to a location of your choosing on you computer. Take and put your HD2 manually into bootloader by holding the volume down button down while powering on your HD2. When you see the multicolor bootloader screen on your HD2 connect it to your computer via USB cable. If it is the first time you have connected it to your computer while in bootloader you will have to give it a minute or two for the drivers to install. When you see the Serial in the white bar of bootloader change to USB you have a HTC USB Sync connection between your HD2 and your computer. This is very important, make sure you have the latest ActiveSync or Windows Mobile Device Center version (depending on what version of Windows your computer uses) installed on your computer as it has the updated USB drivers for the HTC USB Sync connection. Go to here to download these. When you see the USB in the white bar of bootloader right click on the HSPL 4 utility and select run as administrator. Follow the on screen instructions and select the desired HSPL version when it prompts you for what version you want to install. If you want to flash MAGLDR to install NAND Android or Windows Phone 7 you have to select 2.08 HSPL. When you see “We hacked it” on your HD2 screen you click yes on your computer in the box on the screen to confirm you see “We hacked it” then click close and you have flashed HSPL to your HTC HD2. T-Macgnolia
This is from the link I gave you earlier.
Read it carefully and follow the instructions to the letter. go to the original post for the links.
That's as far as I can go to help you..
Best of luck
i've got a 2.08.0000spl now... but i can't manage to flash a hspl...is the bootloader damaged or corrupted?
done the removal... when plugged again it automatically reinstalls drivers from activesync folder, is this correct? should i uninstall activesync too??