Related
hello, maybe some1 from here can help me... i think my phone is bricked!
when i boot my phone, it only gives HTC logo and nothing else..
i did a soft and hard reset and now able to get into that bootloader thingy with volume down and on button.. but now i am stuck,
i tought just installing original software would help, but it doesnt install it!
In bootloader do you have hspl installed. To load magldr in order to run a NAND Android rom, you need 2.08.hspl and a 50 series radio, 2.08.50 or higher.
Why can't you flash a rom in bootloader, what errors do you get? Just connect phone in bootloader to your pc and when "usb" shows on screen flash the rom.
What did you do???
mardi123 said:
i tought just installing original software would help, but it doesnt install it!
Click to expand...
Click to collapse
Can you provide more details:
what phone do you have (HD2 Europe, TMOUS, etc)?
What is currently running on it (or supposed to be, look at how I list my current phone in my signature for how to tell us what you are running)?
What got you in this predicament (flashing rom, radio, adding apps, themes, etc)?
What "original software" are you trying use that's not helping?
How are you trying to install that "original software"?
i tried original version:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
and
dezeRUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
if i try to instal, it just doesnt do anything, stuck in 0%
my serial nr: ht033nw01277
further information:
pb81100 HX-BC
SPL-2.08.0000 8G XE
MicroP (LED) 0x05
MicroP(TOUCH) 0x40
mardi123 said:
i tried original version:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
and
dezeRUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
if i try to instal, it just doesnt do anything, stuck in 0%
my serial nr: ht033nw01277
further information:
pb81100 HX-BC
SPL-2.08.0000 8G XE
MicroP (LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
You have 2.08.0000 - you HAVE to have 2.08.hspl to install magldr.
Are you sure those roms are the original roms for your device? You need to download the orignal rom from HTC for your area using your S/N
i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked
mardi123 said:
i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked
Click to expand...
Click to collapse
Yes, but when you run hspl2 you can select either 2.08.0000 or 2.08.hspl in the drop down. You have to select 2.08.hspl NOT 2.08.0000. Also your radio is now 2.06.51.07, you have to flash to a 50 series radio (not 51 as you have) and it has to be 2.08.50 or higher as I have already said.
oke now i have hspl version, and succesfully installed MGLDR111, trying to instal android, it sais this:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Error Description: wait marker fails
Info: .\RSPL\BootLoader.cpp (225)
mardi123 said:
i tried to install android, so i downgraded to RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
next installed
HSPL2_RUN
next to this it didnt do anything,
now i reinstalled HSPL2_run and that worked it said hacked
Click to expand...
Click to collapse
that was the first thing you needed to get done, hardspl is very important, now that you got the hacked it message HSPL is in, go into bootloader and check that it says HSPL, upgrade your radio to a 2.15.50.14, do a task 29, install MGLDR and then flash whatever nand rom you want.
From Noob Guide to installing NAND roms FAQ:
Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.
Click to expand...
Click to collapse
oke thanks all! that radio version, i've downloaded it, and it is succesfully installed
now it booted up in aMAGLDR v1.11 and see som listing, boot ad sd boot ad nand etc, so now i am gonna do that task29 thingy and try installing 1.13!
Glad to hear. Good luck on the upgrade.
O_M_G
THNX U ALL!!! It's fixed and it is now in android!
I can't explain how thankfull i am, with you guys!!!
THNX!!!!!!
OK, please try to help me.
I'm having trouble in changing the SPL in my Leo.
I have installed WRONGLY SPL 2.08 instead of HSPL 2.08 by DFT HSPL3
Since this made me unable to install MAGLDR, i tried idiotic idea to install the newest stocking ROM from htc site (Serial confirmed) with htc installer from windows.
Right now, i have working HTC with details as below:
ROM: 3.14.479.2 (04666) WWE
RADIO: 2.15.50.14
SN: HT03DNW00564
When i get into bootloader, there is:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So, time for the problem:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens. DFT HSPL just shows progres bar moving and nothing happens (i have waited 20 mins).
I have no more ideas anymore, what can i do. Hopefully Phone works, and those not have any Cooked ROM on it, but i don't wont to use this ROM
PLEASE, try to help...
PS. I have tried different USB Ports, i have installed fresh Windows (really). I'm using XP SP3. Battery is at 100%.
Try running a task 29 and then run the HSPL again and install the 2.08 HSPL. Then flash MAGLDR then the ROM you want.
Edit: Sorry I momentarly forgot you have to have HSPL to do a task 29. Do this make sure your phone is in bootloader and plug it into the computer via USB cable and then wait until it says USB at yhe bottom in the white. Then and only then run the DFT HSPL again.
With Task29 also nothing happens. Same as with ROMS and HSPL, After synchro in ActiveSync, i have run TASK29, then my Leo goes into Bootloader and nothing happend. On Windows screen i have 0% progress bar, on HTC HD2 i see bootloader with USB status.
ERROR 302
EDIT: After clicking through recovery steps, Leo turned to showing Progres bar, but also stops at 0%.
RealWaaagh said:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.479.1
Click to expand...
Click to collapse
Just making sure: did you try to flash those stock roms over USB? Stock SPL's don't have the same protection that HSPL has, and can be overwritten by flashing over USB just fine.
Also: until you're sure you can reflash at least something, it might be better to stay away from task29
I tried also by USB (all three), and still the same. Progress bar on PC and Phone shows 0% and after some time, Installer shows ERROR about connection. ERROR302 i think.
PS. I really start to think i'm missing some detail. ROM works, everything works excluding boot loader. For me, it looks like bootloader is broken somehow, and i don't have idea how to make it work properly.
RealWaaagh said:
I tried also by USB (all three), and still the same. Progress bar on PC and Phone shows 0% and after some time, Installer shows ERROR about connection. ERROR302 i think.
PS. I really start to think i'm missing some detail. ROM works, everything works excluding boot loader. For me, it looks like bootloader is broken somehow, and i don't have idea how to make it work properly.
Click to expand...
Click to collapse
Hmm... If you can't get your phone to flash anything over either USB or SD, it does sound like your bootloader might be corrupted or something. That 302 error also doesn't sound good.
I guess if you have them you could try flashing using:
- a different pc/laptop
- a different SD card (perhaps a goldcard?)
*Probably* won't help, but won't make things worse either.
Ok, for today i have enough. I will try tomorrow with another PC.
SD Cards i already tried three of them.
RealWaaagh said:
OK, please try to help me.
I'm having trouble in changing the SPL in my Leo.
I have installed WRONGLY SPL 2.08 instead of HSPL 2.08 by DFT HSPL3
Since this made me unable to install MAGLDR, i tried idiotic idea to install the newest stocking ROM from htc site (Serial confirmed) with htc installer from windows.
Right now, i have working HTC with details as below:
ROM: 3.14.479.2 (04666) WWE
RADIO: 2.15.50.14
SN: HT03DNW00564
When i get into bootloader, there is:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So, time for the problem:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens. DFT HSPL just shows progres bar moving and nothing happens (i have waited 20 mins).
I have no more ideas anymore, what can i do. Hopefully Phone works, and those not have any Cooked ROM on it, but i don't wont to use this ROM
PLEASE, try to help...
PS. I have tried different USB Ports, i have installed fresh Windows (really). I'm using XP SP3. Battery is at 100%.
Click to expand...
Click to collapse
Mate, you said that you flashed stock rom v.3.14.xxx but you also said that the SPL 2.08.
I m quite confused, usually the stock rom v.3.14 contains SPL 3.03 (not 2.08). So, I m curious what version of your hd2, is it TMOUS?
Have you tried a HARD RESET?
Try HR and see whether your hd2 can pass that.
If succeded, you can retry flashing HSPL over usb (dont forget to turn off antivirus, firewall, internet on your pc) or else retry flashing via micro sd flashing (use 2,4 or 8 gb reformated micro sd)
hope you can succeed.
good luck
When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens.
Click to expand...
Click to collapse
forget starting with the phone already running, it doesnt need to connect to activesync, that just adds a load of confusion, saying that in all the instructuons.
phone off
phone into bootloader
usb
hspl4
choose 2.08.hspl
bootloader
flash rom
I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
Click to expand...
Click to collapse
so thats two east europe and a wwe rom, , you dont have hspl installed, , and you're unsure why nothing will flash?
cancel this post
RealWaaagh said:
Ok, for today i have enough. I will try tomorrow with another PC.
SD Cards i already tried three of them.
Click to expand...
Click to collapse
One more question are you right clicking and running HSPL as administrator???
samsamuel said:
forget starting with the phone already running, it doesnt need to connect to activesync, that just adds a load of confusion, saying that in all the instructuons.
phone off
phone into bootloader
usb
hspl4
choose 2.08.hspl
bootloader
flash rom
so thats two east europe and a wwe rom, , you dont have hspl installed, , and you're unsure why nothing will flash?
Click to expand...
Click to collapse
I have already tried to start hspl4 without running WinMo, same effect. In WinXP Bootloader still displays on the Phone, and in DFT HSPL progres bar just bounce from left to right.
In Vista DFT HSPL returns critical error about connection.
About ROMS, 3.14 is East Europe (downloaded from HTC after checking serial) and 1.48 is WWE, also checked with serial from HTC site.
I have tried 1.48 EE since somewhere i have read, taht i have to get rom with the same number on the end, as installed (ie. 3.14.479."2")
PS. I can't tconnect to Mobile Center is Vista. With ActiveSync on WinXP there are no problems.
silverwind said:
Mate, you said that you flashed stock rom v.3.14.xxx but you also said that the SPL 2.08.
I m quite confused, usually the stock rom v.3.14 contains SPL 3.03 (not 2.08). So, I m curious what version of your hd2, is it TMOUS?
Have you tried a HARD RESET?
Try HR and see whether your hd2 can pass that.
If succeded, you can retry flashing HSPL over usb (dont forget to turn off antivirus, firewall, internet on your pc) or else retry flashing via micro sd flashing (use 2,4 or 8 gb reformated micro sd)
hope you can succeed.
good luck
Click to expand...
Click to collapse
My Phone is East Europe WWE (afaik).
I have installed SPL 2.08 onto HSPL 1.6 with DFT HSPL3.
Then i have installed 3.14 by USB. I don't know, why i still have SPL2.08 if you say i should't.
HR works fine.
In a minute i will check HSPL with internet turned off.
How to flash HSPL via microSD ?
Since i can't flash whole ROMs (maybe i have wrong ones, but they pass serial check on htc.com) from microSD (3 cards checked 2GB SD, 4 GB SDHC(don't work), 16 GB SDHC)
T-Macgnolia said:
One more question are you right clicking and running HSPL as administrator???
Click to expand...
Click to collapse
When i try run in Vista, i click and run it as Admin, but in XP i have Admin Account, so i just run it.
PS. Sorry for three posts, i didn't see multiple-quote option
RealWaaagh said:
When i try run in Vista, i click and run it as Admin, but in XP i have Admin Account, so i just run it.
PS. Sorry for three posts, i didn't see multiple-quote option
Click to expand...
Click to collapse
Doesn't matter, still right click and run as admin, always put phone in bootloader yourself before starting to flash, if it fails just run hspl.exe again. Try all USB ports.
No, you can't apply hspl from SD card.
samsamuel said:
Doesn't matter, still right click and run as admin, always put phone in bootloader yourself before starting to flash, if it fails just run hspl.exe again. Try all USB ports.
No, you can't apply hspl from SD card.
Click to expand...
Click to collapse
PROBLEM SOLVED
I needed to make another admin account in WinXP. And then use it by Run As (then choose this new account).
I don't know why it works like that, but it worked.
Just to give all informations.
After more testing, i detected my Computer problem. My USB ports were not working properly, and update of Motherboard BIOS helped (ASUS P7P55D). So, i don't know what was the exact issue of problems.
Hiya
My 1st attempt to flash a phone and not going so well! Sorry if it's been asked before but been looking around for what seems like hours and going round in circles!
Installed MAGLDR113 and all seemed well. Can get into the bootloader screen but unable to flash back to stock rom 6.5 and saying INVALID VENDOR ID. Nor can I seem to get the menu up to get into the USB Flasher to install Win7.
When I hold down the vol down key and boot up, I can plug it in via USB and can flash to the phone but what do I need to flash??
Any pointers greatly received! Thanks
you need to provide more info.
first and foremost, have you installed hspl on your phone? you need hspl 2.08 before installing magldr.
you can get it here:
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
antaed said:
you need to provide more info.
first and foremost, have you installed hspl on your phone? you need hspl 2.08 before installing magldr.
you can get it here:
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
Click to expand...
Click to collapse
Ahh, see told you I was a newbie!
No I haven't installed that, is there a way to do it after installing magldr?
PB81100 HX-BC
SPL-3-03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
This is in the red band.
Hope this helps someone who can shed some light on where I go next!
antaed said:
you need to provide more info.
first and foremost, have you installed hspl on your phone? you need hspl 2.08 before installing magldr.
you can get it here:
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
Click to expand...
Click to collapse
Have used HSPL4 as this tells me I am able to downgrade to 2.08 using this. Tried it several times and it says it is successful but still shows as 3.03.
Have managed to get into the bootloader menu and try and flash stock ROM that I got from here (RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship) but it fails.
HSPL>Radio>MAGLDR>WP7
thats the order in which you need,
ive never installed magldr first then tried HSPL but give it a shot
boot in to the bootloader, plug in the USB cable, and install HSPL
maybe worth doing magldr again, make sure the radio is the correct verison
the boot in to magldr, and go to USB flasher, connect the cable then run WP7 setup
1. download hspl3 and unzip
2. exit all running programs on pc, including antivirus
3. enter bootloader
4. connect to pc via usb and wait for connection to be establihed - you should see usb instead of serial on the bottom of the screen
5. run hspl3_pkg.exe as administrator
6. select 2.08 hspl and follow the dialog to finish the installation
7. enter bootloader again - you should see "cotullahspl"
if you ever want to go back to your stock rom remember to install hspl4 and choose either spl 3.03 or hspl 3.03.
edit:
dazza was faster
antaed said:
1. download hspl3 and unzip
2. exit all running programs on pc, including antivirus
3. enter bootloader
4. connect to pc via usb and wait for connection to be establihed - you should see usb instead of serial on the bottom of the screen
5. run hspl3_pkg.exe as administrator
6. select 2.08 hspl and follow the dialog to finish the installation
7. enter bootloader again - you should see "cotullahspl"
if you ever want to go back to your stock rom remember to install hspl4 and choose either spl 3.03 or hspl 3.03.
edit:
dazza was faster
Click to expand...
Click to collapse
Thanks for the info but tried using HSPL3 and it just tells me "BAD SPL version". That's why I tried HSPL4 and was able to run successfully but when it reboots it still says it's on 3.03!
antaed said:
1. download hspl3 and unzip
2. exit all running programs on pc, including antivirus
3. enter bootloader
4. connect to pc via usb and wait for connection to be establihed - you should see usb instead of serial on the bottom of the screen
5. run hspl3_pkg.exe as administrator
6. select 2.08 hspl and follow the dialog to finish the installation
7. enter bootloader again - you should see "cotullahspl"
if you ever want to go back to your stock rom remember to install hspl4 and choose either spl 3.03 or hspl 3.03.
edit:
dazza was faster
Click to expand...
Click to collapse
Have tried to rerun magldr, it runs but comes up with ERROR (270) : UPDATE ERROR
bobdylan1 said:
Thanks for the info but tried using HSPL3 and it just tells me "BAD SPL version". That's why I tried HSPL4 and was able to run successfully but when it reboots it still says it's on 3.03!
Click to expand...
Click to collapse
hspl4 is also what i use but you need to select 2.08 hspl upon installation.
OK, have managed to flash a stock rom to downgrade the SPL to 1.42, does this change anything as I still don't seem to be able to get any further!
Now saying:
PB81100 HX-BC
SPL-1-42.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
bobdylan1 said:
OK, have managed to flash a stock rom to downgrade the SPL to 1.42, does this change anything as I still don't seem to be able to get any further!
Now saying:
PB81100 HX-BC
SPL-1-42.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Click to expand...
Click to collapse
Now instal HSPL 2.08
then make sure you have the correct radio
then install Magldr
then go in to magldr and use the usb flasher
connect the cable and run WP7 setup
antaed said:
1. download hspl3 and unzip
2. exit all running programs on pc, including antivirus
3. enter bootloader
4. connect to pc via usb and wait for connection to be establihed - you should see usb instead of serial on the bottom of the screen
5. run hspl3_pkg.exe as administrator
6. select 2.08 hspl and follow the dialog to finish the installation
7. enter bootloader again - you should see "cotullahspl"
if you ever want to go back to your stock rom remember to install hspl4 and choose either spl 3.03 or hspl 3.03.
edit:
dazza was faster
Click to expand...
Click to collapse
aye but you where somewhat more concise!
Thanks everyone, installed 2.08, updated the radio and magldr came up with the menu. Have flashed Win7 so just having a play now!
I have a Tmobile 1024 Leo. A year ago I put Android and WM on it. It was a dual boot, beacuse they had not done NAND yet. Well I dropped it and broke the screen. So it sat for a year untill I decided to to fix the screen. Now when you turn it on it will not go past the sticking together screen. I can boot it in to the tri-color screen and nothing else. I tried flashing it back to WM and it gets anywhere from 64-99% done, depending on what ROM I use, and then errors out. I tried to do it from the memory card and it will not go into the flash menu. Is this thing bricked? Do I need to have some one with a Riff Box make a go at it? Or am I missing something? If some one has ideas that would be AWESOME!
what does your bootloader say?
check out my thread, you can try the sd card method / task 29
I tried flashing it back to WM and it gets anywhere from 64-99% done, depending on what ROM I use, and then errors out
Click to expand...
Click to collapse
maybe post error or a screenshot of it
maybe at the error are some hints.
then whats your bootloader version @tri color screen?
tried task29?
maybe installed a wrong HSPL/SPL version?
You should download the HD2 Nand Toolkit from Nand Development.
http://forum.xda-developers.com/showthread.php?t=1090783
Install it and do a Task29 Wipe. From there on you should check your Radio. Most of the time you need 2.15.50.14. Then install HARDSPL 2.08 and then you can flash whatever ROM you like. Check this : http://forum.xda-developers.com/showthread.php?t=893948
Hope I could help!
jsmccabe78 said:
what does your bootloader say?
Click to expand...
Click to collapse
Okay the Tri-Color screen shows :
PB81120 SS-B3
SPL-2.08.HSPL 8G Xe
0x05
CotullaHSPL 0x50
Then in the top righ hand corner of the screen it shows.
RUUNBH
putti71 said:
You should download the HD2 Nand Toolkit from Nand Development.
http://forum.xda-developers.com/showthread.php?t=1090783
Install it and do a Task29 Wipe. From there on you should check your Radio. Most of the time you need 2.15.50.14. Then install HARDSPL 2.08 and then you can flash whatever ROM you like. Check this : http://forum.xda-developers.com/showthread.php?t=893948
Hope I could help!
Click to expand...
Click to collapse
I downloaded the tool kit like you recommended, and then did the task29 wipe. Then I tried to install the radio that you recomened. It installs to 96% done and then freezes. Not sure what to do next.
UPDATE:
Got MagLdr to install. When I push power then the volume button to get it to open, it brings up the MagLdr screen and then there are no options to use. But when it was flashing, the computer said error communicating with device, but the screen on the phone shows that it was at 100%.
Nevermindd
Sent from my HTC HD2 using XDA Premium App
Any good ideas or am I just screwed?
This is gonna sound dumb.....but try it on a different computer.
Sent from my HTC HD2 using XDA Premium App
Hi, i see this:
PB81100 HX-BC
SPL-2.0.8.0000 8G XE
MicroP(LED) 0x05
And i can go further, if i insert a stock rom in SD rename to leoimg.nbh it is stuck on "loading..."
any help?
I try to flash hspl but nothing happens for hours....
what version of hspl did you flash?
an what type hd2 do you have(tmous or eu)????
i've tried 2.08 and above... but always stuck on animation of bar going left and right, i left it for 2 hours, but nothing happens!
plz help!! Is my hd2 bricked?
Don't think so, from what I know you have to flash the wrong radio ver on tmous handsets to brick them...
Have a read here..
http://forum.xda-developers.com/showthread.php?t=1090783
Have to go out now back later..
i've downloaded the unified tool, but nothing works!
Better use the hd2 nand tookit (link in above link)
what happens when you power on an hold the vol down button...do you get a three-color screen?
yes with those infos:
PB81100 HX-BC
SPL-2.0.8.0000 8G XE
MicroP(LED) 0x05
so?
Try the hd2 nand toolkit and select install hspl and follow instructions.
When you plug usb into phone it should say usb on the tri-color screen.
I've tried. The bar of loading goes around but The hspl won't install. I will try again now
The same again. Nothing change.
so it recognised the phone tried to install, and did it give an error..??
What version did you select ?
i tried 2.08 hspl and others, but stuck on bars loading back and forward and even after two hours nothing happens... i'm desperate...
Only other thing I can think of is check that your anti-virus is not blocking it , actually turn it off and try again....
i've disabled real time protection and tried...nothing.
i dunno what to do more...
mrmcphisto77 said:
i've disabled real time protection and tried...nothing.
i dunno what to do more...
Click to expand...
Click to collapse
Disable completely ...to make sure..
i've a mac at home and i'm trying now with a vmware machine... with no AV, tomorrow i'll try on a laptop with wxp installed...
But now, no success with the wxp vmware, without AV. Same behaviour of a "direct" wxp installation.
should active sync accept incoming usb connections?
To install any SPL or HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
First go to here to download HSPL 4. I suggest HSPL 4 because it supports all SPL versions that are out right now including SPL 3.03.0000 and SPL 3.10.0000. Remember you can also use HSPL 4 to flash back to your original SPL. Once you have HSPL 4 downloaded use a zip program like WinZip, WinRar, or Win7 to extract the .exe file for the DFT installation utility to a location of your choosing on you computer. Take and put your HD2 manually into bootloader by holding the volume down button down while powering on your HD2. When you see the multicolor bootloader screen on your HD2 connect it to your computer via USB cable. If it is the first time you have connected it to your computer while in bootloader you will have to give it a minute or two for the drivers to install. When you see the Serial in the white bar of bootloader change to USB you have a HTC USB Sync connection between your HD2 and your computer. This is very important, make sure you have the latest ActiveSync or Windows Mobile Device Center version (depending on what version of Windows your computer uses) installed on your computer as it has the updated USB drivers for the HTC USB Sync connection. Go to here to download these. When you see the USB in the white bar of bootloader right click on the HSPL 4 utility and select run as administrator. Follow the on screen instructions and select the desired HSPL version when it prompts you for what version you want to install. If you want to flash MAGLDR to install NAND Android or Windows Phone 7 you have to select 2.08 HSPL. When you see “We hacked it” on your HD2 screen you click yes on your computer in the box on the screen to confirm you see “We hacked it” then click close and you have flashed HSPL to your HTC HD2. T-Macgnolia
This is from the link I gave you earlier.
Read it carefully and follow the instructions to the letter. go to the original post for the links.
That's as far as I can go to help you..
Best of luck
i've got a 2.08.0000spl now... but i can't manage to flash a hspl...is the bootloader damaged or corrupted?
done the removal... when plugged again it automatically reinstalls drivers from activesync folder, is this correct? should i uninstall activesync too??