Database Users

[Q] Error After installing maglder

hi All
after installing ROMupdateutility.exe to my HD2 ,while restarting to get the black screen that have 9 choice but i didnt get this black screen and its stopped in HTC logo white screen,
whats wrong with this and what i have to do?
thanks alot.

I f you install no rom that's a bit normal
When you start your phone, push the power button and hold it until you get the menu.

i didnt get it yet, its 5 minutes
thanks,

What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.

Beany69 said:
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Click to expand...
Click to collapse
its 2.o8
Sent from my HTC Desire using XDA App

Problem with maglder
Hi
I am trying to install Magldr on my HTC HD2, SPL 2.08, however i am getting the following error message everytime MagLdr (RomUpdateUtility) restarts my phone to upload the new version,
"ERROR [266]: UPDATE ERROR
The update utility cannot get response from your PDA phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone."
Dont know why it shows this message, I checked all the connections, the SPL shows connected to USB, my Windows 7, 64bit also dectects it, but I am still getting this message. please help

Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.

Beany69 said:
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Click to expand...
Click to collapse
thanks Beany69, Not sure, I am new to this thing, right, let me tell you extactly what it shows when I start my phone in boot mode or what ever its called i.e. when I press the downkey with green button
"PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40"
is this HSPL, if not how do I upgrade this it the required HSPL., please
and when I run the RomUpdateUtility.exe on my pc, it checks the current version displays it as "Miri"

[Q] Can't change SPL

OK, please try to help me.
I'm having trouble in changing the SPL in my Leo.
I have installed WRONGLY SPL 2.08 instead of HSPL 2.08 by DFT HSPL3
Since this made me unable to install MAGLDR, i tried idiotic idea to install the newest stocking ROM from htc site (Serial confirmed) with htc installer from windows.
Right now, i have working HTC with details as below:
ROM: 3.14.479.2 (04666) WWE
RADIO: 2.15.50.14
SN: HT03DNW00564
When i get into bootloader, there is:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So, time for the problem:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens. DFT HSPL just shows progres bar moving and nothing happens (i have waited 20 mins).
I have no more ideas anymore, what can i do. Hopefully Phone works, and those not have any Cooked ROM on it, but i don't wont to use this ROM
PLEASE, try to help...
PS. I have tried different USB Ports, i have installed fresh Windows (really). I'm using XP SP3. Battery is at 100%.

Try running a task 29 and then run the HSPL again and install the 2.08 HSPL. Then flash MAGLDR then the ROM you want.
Edit: Sorry I momentarly forgot you have to have HSPL to do a task 29. Do this make sure your phone is in bootloader and plug it into the computer via USB cable and then wait until it says USB at yhe bottom in the white. Then and only then run the DFT HSPL again.

With Task29 also nothing happens. Same as with ROMS and HSPL, After synchro in ActiveSync, i have run TASK29, then my Leo goes into Bootloader and nothing happend. On Windows screen i have 0% progress bar, on HTC HD2 i see bootloader with USB status.
ERROR 302
EDIT: After clicking through recovery steps, Leo turned to showing Progres bar, but also stops at 0%.

RealWaaagh said:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.479.1
Click to expand...
Click to collapse
Just making sure: did you try to flash those stock roms over USB? Stock SPL's don't have the same protection that HSPL has, and can be overwritten by flashing over USB just fine.
Also: until you're sure you can reflash at least something, it might be better to stay away from task29

I tried also by USB (all three), and still the same. Progress bar on PC and Phone shows 0% and after some time, Installer shows ERROR about connection. ERROR302 i think.
PS. I really start to think i'm missing some detail. ROM works, everything works excluding boot loader. For me, it looks like bootloader is broken somehow, and i don't have idea how to make it work properly.

RealWaaagh said:
I tried also by USB (all three), and still the same. Progress bar on PC and Phone shows 0% and after some time, Installer shows ERROR about connection. ERROR302 i think.
PS. I really start to think i'm missing some detail. ROM works, everything works excluding boot loader. For me, it looks like bootloader is broken somehow, and i don't have idea how to make it work properly.
Click to expand...
Click to collapse
Hmm... If you can't get your phone to flash anything over either USB or SD, it does sound like your bootloader might be corrupted or something. That 302 error also doesn't sound good.
I guess if you have them you could try flashing using:
- a different pc/laptop
- a different SD card (perhaps a goldcard?)
*Probably* won't help, but won't make things worse either.

Ok, for today i have enough. I will try tomorrow with another PC.
SD Cards i already tried three of them.

RealWaaagh said:
OK, please try to help me.
I'm having trouble in changing the SPL in my Leo.
I have installed WRONGLY SPL 2.08 instead of HSPL 2.08 by DFT HSPL3
Since this made me unable to install MAGLDR, i tried idiotic idea to install the newest stocking ROM from htc site (Serial confirmed) with htc installer from windows.
Right now, i have working HTC with details as below:
ROM: 3.14.479.2 (04666) WWE
RADIO: 2.15.50.14
SN: HT03DNW00564
When i get into bootloader, there is:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So, time for the problem:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens. DFT HSPL just shows progres bar moving and nothing happens (i have waited 20 mins).
I have no more ideas anymore, what can i do. Hopefully Phone works, and those not have any Cooked ROM on it, but i don't wont to use this ROM
PLEASE, try to help...
PS. I have tried different USB Ports, i have installed fresh Windows (really). I'm using XP SP3. Battery is at 100%.
Click to expand...
Click to collapse
Mate, you said that you flashed stock rom v.3.14.xxx but you also said that the SPL 2.08.
I m quite confused, usually the stock rom v.3.14 contains SPL 3.03 (not 2.08). So, I m curious what version of your hd2, is it TMOUS?
Have you tried a HARD RESET?
Try HR and see whether your hd2 can pass that.
If succeded, you can retry flashing HSPL over usb (dont forget to turn off antivirus, firewall, internet on your pc) or else retry flashing via micro sd flashing (use 2,4 or 8 gb reformated micro sd)
hope you can succeed.
good luck

When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens.
Click to expand...
Click to collapse
forget starting with the phone already running, it doesnt need to connect to activesync, that just adds a load of confusion, saying that in all the instructuons.
phone off
phone into bootloader
usb
hspl4
choose 2.08.hspl
bootloader
flash rom
I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
Click to expand...
Click to collapse
so thats two east europe and a wwe rom, , you dont have hspl installed, , and you're unsure why nothing will flash?

cancel this post

RealWaaagh said:
Ok, for today i have enough. I will try tomorrow with another PC.
SD Cards i already tried three of them.
Click to expand...
Click to collapse
One more question are you right clicking and running HSPL as administrator???

samsamuel said:
forget starting with the phone already running, it doesnt need to connect to activesync, that just adds a load of confusion, saying that in all the instructuons.
phone off
phone into bootloader
usb
hspl4
choose 2.08.hspl
bootloader
flash rom
so thats two east europe and a wwe rom, , you dont have hspl installed, , and you're unsure why nothing will flash?
Click to expand...
Click to collapse
I have already tried to start hspl4 without running WinMo, same effect. In WinXP Bootloader still displays on the Phone, and in DFT HSPL progres bar just bounce from left to right.
In Vista DFT HSPL returns critical error about connection.
About ROMS, 3.14 is East Europe (downloaded from HTC after checking serial) and 1.48 is WWE, also checked with serial from HTC site.
I have tried 1.48 EE since somewhere i have read, taht i have to get rom with the same number on the end, as installed (ie. 3.14.479."2")
PS. I can't tconnect to Mobile Center is Vista. With ActiveSync on WinXP there are no problems.

silverwind said:
Mate, you said that you flashed stock rom v.3.14.xxx but you also said that the SPL 2.08.
I m quite confused, usually the stock rom v.3.14 contains SPL 3.03 (not 2.08). So, I m curious what version of your hd2, is it TMOUS?
Have you tried a HARD RESET?
Try HR and see whether your hd2 can pass that.
If succeded, you can retry flashing HSPL over usb (dont forget to turn off antivirus, firewall, internet on your pc) or else retry flashing via micro sd flashing (use 2,4 or 8 gb reformated micro sd)
hope you can succeed.
good luck
Click to expand...
Click to collapse
My Phone is East Europe WWE (afaik).
I have installed SPL 2.08 onto HSPL 1.6 with DFT HSPL3.
Then i have installed 3.14 by USB. I don't know, why i still have SPL2.08 if you say i should't.
HR works fine.
In a minute i will check HSPL with internet turned off.
How to flash HSPL via microSD ?
Since i can't flash whole ROMs (maybe i have wrong ones, but they pass serial check on htc.com) from microSD (3 cards checked 2GB SD, 4 GB SDHC(don't work), 16 GB SDHC)

T-Macgnolia said:
One more question are you right clicking and running HSPL as administrator???
Click to expand...
Click to collapse
When i try run in Vista, i click and run it as Admin, but in XP i have Admin Account, so i just run it.
PS. Sorry for three posts, i didn't see multiple-quote option

RealWaaagh said:
When i try run in Vista, i click and run it as Admin, but in XP i have Admin Account, so i just run it.
PS. Sorry for three posts, i didn't see multiple-quote option
Click to expand...
Click to collapse
Doesn't matter, still right click and run as admin, always put phone in bootloader yourself before starting to flash, if it fails just run hspl.exe again. Try all USB ports.
No, you can't apply hspl from SD card.

samsamuel said:
Doesn't matter, still right click and run as admin, always put phone in bootloader yourself before starting to flash, if it fails just run hspl.exe again. Try all USB ports.
No, you can't apply hspl from SD card.
Click to expand...
Click to collapse
PROBLEM SOLVED
I needed to make another admin account in WinXP. And then use it by Run As (then choose this new account).
I don't know why it works like that, but it worked.

Just to give all informations.
After more testing, i detected my Computer problem. My USB ports were not working properly, and update of Motherboard BIOS helped (ASUS P7P55D). So, i don't know what was the exact issue of problems.

[Q] Flashing Win7 for the 1st time

Hiya
My 1st attempt to flash a phone and not going so well! Sorry if it's been asked before but been looking around for what seems like hours and going round in circles!
Installed MAGLDR113 and all seemed well. Can get into the bootloader screen but unable to flash back to stock rom 6.5 and saying INVALID VENDOR ID. Nor can I seem to get the menu up to get into the USB Flasher to install Win7.
When I hold down the vol down key and boot up, I can plug it in via USB and can flash to the phone but what do I need to flash??
Any pointers greatly received! Thanks

you need to provide more info.
first and foremost, have you installed hspl on your phone? you need hspl 2.08 before installing magldr.
you can get it here:
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893

antaed said:
you need to provide more info.
first and foremost, have you installed hspl on your phone? you need hspl 2.08 before installing magldr.
you can get it here:
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
Click to expand...
Click to collapse
Ahh, see told you I was a newbie!
No I haven't installed that, is there a way to do it after installing magldr?

PB81100 HX-BC
SPL-3-03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
This is in the red band.
Hope this helps someone who can shed some light on where I go next!

antaed said:
you need to provide more info.
first and foremost, have you installed hspl on your phone? you need hspl 2.08 before installing magldr.
you can get it here:
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
Click to expand...
Click to collapse
Have used HSPL4 as this tells me I am able to downgrade to 2.08 using this. Tried it several times and it says it is successful but still shows as 3.03.
Have managed to get into the bootloader menu and try and flash stock ROM that I got from here (RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship) but it fails.

HSPL>Radio>MAGLDR>WP7
thats the order in which you need,
ive never installed magldr first then tried HSPL but give it a shot
boot in to the bootloader, plug in the USB cable, and install HSPL
maybe worth doing magldr again, make sure the radio is the correct verison
the boot in to magldr, and go to USB flasher, connect the cable then run WP7 setup

1. download hspl3 and unzip
2. exit all running programs on pc, including antivirus
3. enter bootloader
4. connect to pc via usb and wait for connection to be establihed - you should see usb instead of serial on the bottom of the screen
5. run hspl3_pkg.exe as administrator
6. select 2.08 hspl and follow the dialog to finish the installation
7. enter bootloader again - you should see "cotullahspl"
if you ever want to go back to your stock rom remember to install hspl4 and choose either spl 3.03 or hspl 3.03.
edit:
dazza was faster

antaed said:
1. download hspl3 and unzip
2. exit all running programs on pc, including antivirus
3. enter bootloader
4. connect to pc via usb and wait for connection to be establihed - you should see usb instead of serial on the bottom of the screen
5. run hspl3_pkg.exe as administrator
6. select 2.08 hspl and follow the dialog to finish the installation
7. enter bootloader again - you should see "cotullahspl"
if you ever want to go back to your stock rom remember to install hspl4 and choose either spl 3.03 or hspl 3.03.
edit:
dazza was faster
Click to expand...
Click to collapse
Thanks for the info but tried using HSPL3 and it just tells me "BAD SPL version". That's why I tried HSPL4 and was able to run successfully but when it reboots it still says it's on 3.03!

antaed said:
1. download hspl3 and unzip
2. exit all running programs on pc, including antivirus
3. enter bootloader
4. connect to pc via usb and wait for connection to be establihed - you should see usb instead of serial on the bottom of the screen
5. run hspl3_pkg.exe as administrator
6. select 2.08 hspl and follow the dialog to finish the installation
7. enter bootloader again - you should see "cotullahspl"
if you ever want to go back to your stock rom remember to install hspl4 and choose either spl 3.03 or hspl 3.03.
edit:
dazza was faster
Click to expand...
Click to collapse
Have tried to rerun magldr, it runs but comes up with ERROR (270) : UPDATE ERROR

bobdylan1 said:
Thanks for the info but tried using HSPL3 and it just tells me "BAD SPL version". That's why I tried HSPL4 and was able to run successfully but when it reboots it still says it's on 3.03!
Click to expand...
Click to collapse
hspl4 is also what i use but you need to select 2.08 hspl upon installation.

OK, have managed to flash a stock rom to downgrade the SPL to 1.42, does this change anything as I still don't seem to be able to get any further!
Now saying:
PB81100 HX-BC
SPL-1-42.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30

bobdylan1 said:
OK, have managed to flash a stock rom to downgrade the SPL to 1.42, does this change anything as I still don't seem to be able to get any further!
Now saying:
PB81100 HX-BC
SPL-1-42.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Click to expand...
Click to collapse
Now instal HSPL 2.08
then make sure you have the correct radio
then install Magldr
then go in to magldr and use the usb flasher
connect the cable and run WP7 setup

antaed said:
1. download hspl3 and unzip
2. exit all running programs on pc, including antivirus
3. enter bootloader
4. connect to pc via usb and wait for connection to be establihed - you should see usb instead of serial on the bottom of the screen
5. run hspl3_pkg.exe as administrator
6. select 2.08 hspl and follow the dialog to finish the installation
7. enter bootloader again - you should see "cotullahspl"
if you ever want to go back to your stock rom remember to install hspl4 and choose either spl 3.03 or hspl 3.03.
edit:
dazza was faster
Click to expand...
Click to collapse
aye but you where somewhat more concise!

Thanks everyone, installed 2.08, updated the radio and magldr came up with the menu. Have flashed Win7 so just having a play now!

HD2 Stuck on wsod and bootloader

Hi, i see this:
PB81100 HX-BC
SPL-2.0.8.0000 8G XE
MicroP(LED) 0x05
And i can go further, if i insert a stock rom in SD rename to leoimg.nbh it is stuck on "loading..."
any help?
I try to flash hspl but nothing happens for hours....

what version of hspl did you flash?
an what type hd2 do you have(tmous or eu)????

i've tried 2.08 and above... but always stuck on animation of bar going left and right, i left it for 2 hours, but nothing happens!
plz help!! Is my hd2 bricked?

Don't think so, from what I know you have to flash the wrong radio ver on tmous handsets to brick them...
Have a read here..
http://forum.xda-developers.com/showthread.php?t=1090783
Have to go out now back later..

i've downloaded the unified tool, but nothing works!

Better use the hd2 nand tookit (link in above link)
what happens when you power on an hold the vol down button...do you get a three-color screen?

yes with those infos:
PB81100 HX-BC
SPL-2.0.8.0000 8G XE
MicroP(LED) 0x05
so?

Try the hd2 nand toolkit and select install hspl and follow instructions.
When you plug usb into phone it should say usb on the tri-color screen.

I've tried. The bar of loading goes around but The hspl won't install. I will try again now

The same again. Nothing change.

so it recognised the phone tried to install, and did it give an error..??
What version did you select ?

i tried 2.08 hspl and others, but stuck on bars loading back and forward and even after two hours nothing happens... i'm desperate...

Only other thing I can think of is check that your anti-virus is not blocking it , actually turn it off and try again....

i've disabled real time protection and tried...nothing.
i dunno what to do more...

mrmcphisto77 said:
i've disabled real time protection and tried...nothing.
i dunno what to do more...
Click to expand...
Click to collapse
Disable completely ...to make sure..

i've a mac at home and i'm trying now with a vmware machine... with no AV, tomorrow i'll try on a laptop with wxp installed...
But now, no success with the wxp vmware, without AV. Same behaviour of a "direct" wxp installation.

should active sync accept incoming usb connections?

To install any SPL or HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
First go to here to download HSPL 4. I suggest HSPL 4 because it supports all SPL versions that are out right now including SPL 3.03.0000 and SPL 3.10.0000. Remember you can also use HSPL 4 to flash back to your original SPL. Once you have HSPL 4 downloaded use a zip program like WinZip, WinRar, or Win7 to extract the .exe file for the DFT installation utility to a location of your choosing on you computer. Take and put your HD2 manually into bootloader by holding the volume down button down while powering on your HD2. When you see the multicolor bootloader screen on your HD2 connect it to your computer via USB cable. If it is the first time you have connected it to your computer while in bootloader you will have to give it a minute or two for the drivers to install. When you see the Serial in the white bar of bootloader change to USB you have a HTC USB Sync connection between your HD2 and your computer. This is very important, make sure you have the latest ActiveSync or Windows Mobile Device Center version (depending on what version of Windows your computer uses) installed on your computer as it has the updated USB drivers for the HTC USB Sync connection. Go to here to download these. When you see the USB in the white bar of bootloader right click on the HSPL 4 utility and select run as administrator. Follow the on screen instructions and select the desired HSPL version when it prompts you for what version you want to install. If you want to flash MAGLDR to install NAND Android or Windows Phone 7 you have to select 2.08 HSPL. When you see “We hacked it” on your HD2 screen you click yes on your computer in the box on the screen to confirm you see “We hacked it” then click close and you have flashed HSPL to your HTC HD2. T-Macgnolia
This is from the link I gave you earlier.
Read it carefully and follow the instructions to the letter. go to the original post for the links.
That's as far as I can go to help you..
Best of luck

i've got a 2.08.0000spl now... but i can't manage to flash a hspl...is the bootloader damaged or corrupted?

done the removal... when plugged again it automatically reinstalls drivers from activesync folder, is this correct? should i uninstall activesync too??

[Q] Hd2 flashing problem

Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..

ejjjjj said:
Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..
Click to expand...
Click to collapse
Don't you read things carefully before doing something like this? If you had another phone, there's a chance you could have bricked it by doing something stupid like that.
Are you able to enter the bootloader? What SPL version does it show there? Have you tried flashing a stock ROM via the SD card?

First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50

I even tried installing stock rom but still no good! It stucks at loading... screen, help me please!!

hi, check the link Below, does it show the same SPL?

nope, mine is SPL-2.08.0000, but I can change it with hspl4, but can't downgrade it!

ejjjjj said:
First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Click to expand...
Click to collapse
U mixed up the sequence mate, the guide says that 1st install HSPL then Task29 then Radio.
Did u still have connection between your phone and computer?
if not try hit reset button while holding down the volume key.

yep, i mixed it. i can reset it but without any rom update or any update (it won't pass 0%) it has no meaning to reset the phone. I have connection between computer via usb in bootloader mode only!

If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.

thamlim said:
If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.
Click to expand...
Click to collapse
Please, if you don't know exactly what you're talking about don't give out incorrect information. It is NOT possible to install cLK without HSPL, and thus the Task29 won't work either.
@OP, have you tried installing a stock ROM from the SD card? I'm not sure exactly how to do this (see, not giving incorrect info ) but if I'm not mistaken the procedure is to rename the stock ROM to a .zip extension, unzip it, copy RUU_signed.nbh to the SD card and rename it to LEOIMG.nbh, then enter the bootloader and follow the onscreen instructions. However, please check somewhere else that what I've said is correct as well. From here, you can just flash HSPL then MAGLDR, CWM and a zip ROM.

Problem solved, thanks for your answers!