Database Users

[Q] Error After installing maglder

hi All
after installing ROMupdateutility.exe to my HD2 ,while restarting to get the black screen that have 9 choice but i didnt get this black screen and its stopped in HTC logo white screen,
whats wrong with this and what i have to do?
thanks alot.

I f you install no rom that's a bit normal
When you start your phone, push the power button and hold it until you get the menu.

i didnt get it yet, its 5 minutes
thanks,

What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.

Beany69 said:
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Click to expand...
Click to collapse
its 2.o8
Sent from my HTC Desire using XDA App

Problem with maglder
Hi
I am trying to install Magldr on my HTC HD2, SPL 2.08, however i am getting the following error message everytime MagLdr (RomUpdateUtility) restarts my phone to upload the new version,
"ERROR [266]: UPDATE ERROR
The update utility cannot get response from your PDA phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone."
Dont know why it shows this message, I checked all the connections, the SPL shows connected to USB, my Windows 7, 64bit also dectects it, but I am still getting this message. please help

Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.

Beany69 said:
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Click to expand...
Click to collapse
thanks Beany69, Not sure, I am new to this thing, right, let me tell you extactly what it shows when I start my phone in boot mode or what ever its called i.e. when I press the downkey with green button
"PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40"
is this HSPL, if not how do I upgrade this it the required HSPL., please
and when I run the RomUpdateUtility.exe on my pc, it checks the current version displays it as "Miri"

[Q] HELP: Have I bricked my HD2 by installing MAGLDR1.13?

Hi everyone! After checking the forum on possible quirks that can be encountered when installing MAGLDR I hope someone can help me with the following:
I am trying to install Android on the HD2 via full-NAND-flash (i.e. directly via USB without SD card). I read tons of webpages and I believe I understood the necessary steps. Check the SPL; Install Hspl; Install MAGLDR; etc.
I tried to install MAGLDR 1.13 and everything went nice and quick: 100% complete on the phone; 100% complete on the PC; click on finish; phone reboot .......... and now the HD2 does not go past the green-on-white HTC splash screen. No boot.
I can still acess the colour-striped bootloader, which reacts if I connect the USB cable. No more.
What have I done wrong? Can it be recovered?
Thanks in advance for any suggestion.

You need to do a bit more reading (it's fundamental). Flashing MAGLDR is only the first step in getting Android on NAND. Next, you'll need to flash CWM and if you're going to install Android, you are going to have to have an SD card.
It's clear you read enough to get as far as you have. I suggest doing a bit more.
Start here:
http://forum.xda-developers.com/showthread.php?t=905841

Thanks but I don't think I can do much more at this point. The phone seems to be stuck (see my initial post). Cheers,

Did you try holding the Red power button down while the phone was powering up? That should take you into the Magldr menu.
Also, since you say you can get into the bootloader, have you tried reflashing Magldr?

Yes, I did. However, in the flash window, where you should see you are going from ROM version X to ROM version Y, this information does not show. The flash process seems to go through normally but then the situation is the same one.
The bootloader I can access is the normal one, with the red-green-blue stripes: it shows:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
On the bottom it reads "serial" and if I connect the USB cable it changes to "USB".

Do a task 29.
Flash radio 2.15
reflash magldr
Hope this helps

yz.hd said:
Flash radio 2.15
Click to expand...
Click to collapse
I think this is the case sensitive for the OP explained symptoms.
Flash 2.15 or any Radio Rom that supports 576MB.

I have used Task29+radio 2.15.50.14, the doloop file repackaged by shadrac.....
So in principle the radio should be the correct one.
Shall I try with the separate flashes? Would you please let me have the links to download them?
(beginning to despair.....)
Thanks

Use HD2 Toolkit to re-flash MAGLDR 1.13... easiest and most comprehensive tools.. If u still stuck, re-install WM ROM (better custom ROM since u want to install AD NAND) this w keep ur HSPL. Once u are back to WM, repeat the whole cycle use the kit (pls confirm ur Radio 2.xx.50.xx (above 2.07.50.xx) and not the .51.
gd luck

Norton 360 doesn't like the HD2 tkit...
Any idea why Norton 360 discards the download telling me the HD2 Toolkit is a threat? That's odd...... the download link comes from this very site.
Anyone else with the same experience? Cheers!

[Q] Hd2 flashing problem

Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..

ejjjjj said:
Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..
Click to expand...
Click to collapse
Don't you read things carefully before doing something like this? If you had another phone, there's a chance you could have bricked it by doing something stupid like that.
Are you able to enter the bootloader? What SPL version does it show there? Have you tried flashing a stock ROM via the SD card?

First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50

I even tried installing stock rom but still no good! It stucks at loading... screen, help me please!!

hi, check the link Below, does it show the same SPL?

nope, mine is SPL-2.08.0000, but I can change it with hspl4, but can't downgrade it!

ejjjjj said:
First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Click to expand...
Click to collapse
U mixed up the sequence mate, the guide says that 1st install HSPL then Task29 then Radio.
Did u still have connection between your phone and computer?
if not try hit reset button while holding down the volume key.

yep, i mixed it. i can reset it but without any rom update or any update (it won't pass 0%) it has no meaning to reset the phone. I have connection between computer via usb in bootloader mode only!

If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.

thamlim said:
If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.
Click to expand...
Click to collapse
Please, if you don't know exactly what you're talking about don't give out incorrect information. It is NOT possible to install cLK without HSPL, and thus the Task29 won't work either.
@OP, have you tried installing a stock ROM from the SD card? I'm not sure exactly how to do this (see, not giving incorrect info ) but if I'm not mistaken the procedure is to rename the stock ROM to a .zip extension, unzip it, copy RUU_signed.nbh to the SD card and rename it to LEOIMG.nbh, then enter the bootloader and follow the onscreen instructions. However, please check somewhere else that what I've said is correct as well. From here, you can just flash HSPL then MAGLDR, CWM and a zip ROM.

Problem solved, thanks for your answers!

[Q] Unable to boot to CLK - Stuck on HTC screen

Hi Team
Just bought an old HD2 from work and am trying to flash to Android via the method described here - http://forum.xda-developers.com/showthread.php?t=1402975
I get as far as the repartition step 13, and when the phone reboots it does not load into CLK fastboot. All that happens is the white HTC screen comes up and doesn't go any further. At this point the phone is not detectable via ADB or normal USB.
The phone is a GSM HD2 and has HSPL 2.08 installed.
Any help recovering this or pushing forward with the flash is much appreciated.

At step 13 you are in recovery trying to install the rom, it should be trying to boot the rom!
If you are in recovery then you have clk installed.
You might not have the correct partition size for your rom, it will not boot if the partition size is too small.
.

shanman-2 said:
At step 13 you are in recovery trying to install the rom, it should be trying to boot the rom!
If you are in recovery then you have clk installed.
You might not have the correct partition size for your rom, it will not boot if the partition size is too small.
.
Click to expand...
Click to collapse
Yeah thats the problem - it goes through the CLK partition/recovery install, and the phone goes from the tricolour screen to the HTC 0-100% screen, reboots and then the white HTC logo screen. From the instructions, I thought the phone would go straight into CLK recovery.
Is there a set of key presses I'm meant to do to trigger recovery?

You have to hold "home" while booting to boot into recovery.

jianC said:
You have to hold "home" while booting to boot into recovery.
Click to expand...
Click to collapse
Thanks mate - will give this a crack when I get home

stuartgr said:
Thanks mate - will give this a crack when I get home
Click to expand...
Click to collapse
Yeah didn't work - still goes to the HTC logo...im guessing this means CLK didn't install properly.....Any other ideas?

Do you have install radio 2.15.50.14 ?
Sent from my NexusHD2 using Tapatalk

You have to give us more information.
What does it say when you hold down the volume button when starting the device ?

Same poblem
I have the exact same problem... The clk bootloader doesn't start up when i press the home button, after i've flashed it, but instead getting stuck on the HTC-white screen. I also have another HD2 where i can flash android(NAND) etc... without problems, so i can't really see why it doesn't work..
Right now i've been using:
- HTC HD2 EU-version
- Radio: have tried 2.14.50.02 and 2.15.50.14 without succes...
- SPL - 2.08
- HPSL 4
I'm using the HD2 toolkit when i'm trying to flash the phone.
Please help..

You need HSPL 2.08 or 3.03 to install clk.
Sent from the pub...

shanman-2 said:
You need HSPL 2.08 or 3.03 to install clk.
Sent from the pub...
Click to expand...
Click to collapse
Thanks for response.
I've already have HSPL 2.08, just checked it up to make sure...
It's really strange, that my phone does have the right radio and HSPL, but still hangning up on the white HTC bootscreen, after i've flashed clk into it.. or it says that it had "succesfully flashed it"...
My steps for installing magldr or clk, tried both now.
1: Wipe task 29.
2: Flash HSPL 2.08
3: Flash Radio 2.15.50.1
5: Flash clk.
6: Hardreset.
7: Holding down homebutton.
8: Stuck on white screen... -.-'
---
This is what i have on my tricolor-screen
PB81100 HC - BC
SPL - 2.08. HPSL 8G XE
0X05
CotullaHSPL 0x40
---
Is there any kind of solution for this and have this happen for anyone before?

Have you installed cwm recovery?
Thats what your trying to get to holding the home button.
If it's not working after installing recovery go here and go to post three and try installing clk 1.5 using the leoimg.nbh method.
edit: clk 1.5 comes with recovery pre-installed.

shanman-2 said:
Have you installed cwm recovery?
Thats what your trying to get to holding the home button.
If it's not working after installing recovery go here and go to post three and try installing clk 1.5 using the leoimg.nbh method.
edit: clk 1.5 comes with recovery pre-installed.
Click to expand...
Click to collapse
Thanks for response.
Just tried the sd leoimg.nbh method, but still getting stuck on HTC-white...
:crying:

two2tee said:
Thanks for response.
I've already have HSPL 2.08, just checked it up to make sure...
It's really strange, that my phone does have the right radio and HSPL, but still hangning up on the white HTC bootscreen, after i've flashed clk into it.. or it says that it had "succesfully flashed it"...
My steps for installing magldr or clk, tried both now.
1: Wipe task 29.
2: Flash HSPL 2.08
3: Flash Radio 2.15.50.1
5: Flash clk.
6: Hardreset.
7: Holding down homebutton.
8: Stuck on white screen... -.-'
---
This is what i have on my tricolor-screen
PB81100 HC - BC
SPL - 2.08. HPSL 8G XE
0X05
CotullaHSPL 0x40
---
Is there any kind of solution for this and have this happen for anyone before?
Click to expand...
Click to collapse
two2tee said:
Thanks for response.
Just tried the sd leoimg.nbh method, but still getting stuck on HTC-white...
:crying:
Click to expand...
Click to collapse
Hold the back button while powering on to get to clk, you can boot to recovery from there and then install rom...
If you get to clk don't forgrt to partition your nand through settings menu..resize partitions...

shanman-2 said:
Hold the back button while powering on to get to clk, you can boot to recovery from there and then install rom...
If you get to clk don't forgrt to partition your nand through settings menu..resize partitions...
Click to expand...
Click to collapse
Thanks for response, but it seems like it doesn't even boot clk.. Normally when you've flashed clk, the phone should reboot to a black screen with some text and from here you can flash cwm recovery. But in this case, the black screen doesn't even show up.
Could it be that my phone have some hardware faults, or maybe is my HD2 not compatible with the radio (2.15.50.14) which were recommended?
Anyway, is there some way to see if clk has been flashed properly, just to make sure that it's there?

two2tee said:
Thanks for response, but it seems like it doesn't even boot clk.. Normally when you've flashed clk, the phone should reboot to a black screen with some text and from here you can flash cwm recovery. But in this case, the black screen doesn't even show up.
Could it be that my phone have some hardware faults, or maybe is my HD2 not compatible with the radio (2.15.50.14) which were recommended?
Anyway, is there some way to see if clk has been flashed properly, just to make sure that it's there?
Click to expand...
Click to collapse
The radio is fine for all versions of hd2 and is what I have on my EU version. All I can say is to start from scratch ie. Install hspl 2.08, radio, task 29, then install clk 1.5 again.
In that order...
Sent from the pub...

shanman-2 said:
The radio is fine for all versions of hd2 and is what I have on my EU version. All I can say is to start from scratch ie. Install hspl 2.08, radio, task 29, then install clk 1.5 again.
In that order...
Sent from the pub...
Click to expand...
Click to collapse
Still doesn't solve the problem. I have tried with various kind of orders, but without luck.
Just made a recheck on everything and i can conclude that HSPL 2.08 and the radio 2.15.50.1 is there.
The problem may not be a wrong HSPL or radio, since it's there, but perhaps it might be the phone that doesn't flash clk proberly...
Im really confused right now
Anyway, i've also tried to install magdlr but still ended up on HTC-white screen -.-'

two2tee said:
Still doesn't solve the problem. I have tried with various kind of orders, but without luck.
Just made a recheck on everything and i can conclude that HSPL 2.08 and the radio 2.15.50.1 is there.
The problem may not be a wrong HSPL or radio, since it's there, but perhaps it might be the phone that doesn't flash clk proberly...
Im really confused right now
Anyway, i've also tried to install magdlr but still ended up on HTC-white screen -.-'
Click to expand...
Click to collapse
Really don,t know what to say, looks like a jtag...

shanman-2 said:
Really don,t know what to say, looks like a jtag...
Click to expand...
Click to collapse
Hmm i could flash a custom win6.5 rom without problem...Could that help us on our way or?
EDIT: Just to be more precise, i've used "Artemis HD2 v70.0"
Link:
http://forum.xda-developers.com/showthread.php?t=612580

Well if you can do that it's not a jtag.
Probably be better to go back to stock if all else fails.
Sent from the pub...

[Q] HTC HD2 bricked?

Hello,
I got a htc hd2.
Unfortunately, this only starts to HTC logo.
've Already tried to flash again.:
with hspl : SPL-3.03.hspl,then Task 29. RadioRom 2.15 and the Artemis Rom uploaded.
runs through without error. HTC launches new but unfortunately still the same error.
I then return to the spl-3.03.000
and Stockrom RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship via usb (before, of course task29) uploaded.
runs through without error. HTC launches new but unfortunately still the same error.
Soft reset and hard reset did nothing.
It always starts only until htc logo.
In the bootloader with:
PB81100 SS-BC
SPL 3.03.0000 XE
MicroP (LED) 0x05
MicroP (Touch) 0x50
Someone nee idea what I can try to?
Thanks in advance

HD2 not bricked
See this thread, you may have to downgrade your SPL to 2.10
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=893948
Many thanks to mskip
David
ernie0124 said:
Hello,
I got a htc hd2.
Unfortunately, this only starts to HTC logo.
've Already tried to flash again.:
with hspl : SPL-3.03.hspl,then Task 29. RadioRom 2.15 and the Artemis Rom uploaded.
runs through without error. HTC launches new but unfortunately still the same error.
I then return to the spl-3.03.000
and Stockrom RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship via usb (before, of course task29) uploaded.
runs through without error. HTC launches new but unfortunately still the same error.
Soft reset and hard reset did nothing.
It always starts only until htc logo.
In the bootloader with:
PB81100 SS-BC
SPL 3.03.0000 XE
MicroP (LED) 0x05
MicroP (Touch) 0x50
Someone nee idea what I can try to?
Thanks in advance
Click to expand...
Click to collapse

IMO it's not bricked (afaik it wouldn't start at all if bricked), but something on your MB is faulty.

Best401k said:
See this thread, you may have to downgrade your SPL to 2.10
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=893948
Many thanks to mskip
David
Click to expand...
Click to collapse
that only applies to flashing Android, I think he's just trying to boot WM6.5
bib*oops said:
IMO it's not bricked (afaik it wouldn't start at all if bricked), but something on your MB is faulty.
Click to expand...
Click to collapse
Sounds like your mainboard might be overheating. The ROM you are using sounds correct. Try putting the phone in the freezer for 5 minutes, then turn it on and see if it loads WM6.5 before freezing / restarting again, this would show that your mainboard is faulty.

hi and thanks for your help,
so now I have with MTTY task28, task 29, task 2a and info 8th performed.Since he has given bad blocks.
Then I uploaded the original ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship via sdcard.
Had the phone for 20 minutes, then placed in the refrigerator and then started. again the same problem.
Nand is my broken maybe?

ernie0124 said:
hi and thanks for your help,
so now I have with MTTY task28, task 29, task 2a and info 8th performed.Since he has given bad blocks.
Then I uploaded the original ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship via sdcard.
Had the phone for 20 minutes, then placed in the refrigerator and then started. again the same problem.
Nand is my broken maybe?
Click to expand...
Click to collapse
Might be.
You are 100% sure that is the correct stock ROM?

According to HTC and imeinr. it is a t-mobile cell phone.
He has made ​​the installation of the Roman sdcard without fail.
orangekid said:
Might be.
You are 100% sure that is the correct stock ROM?
Click to expand...
Click to collapse

He always remains the logo

ernie0124 said:
According to HTC and imeinr. it is a t-mobile cell phone.
He has made ​​the installation of the Roman sdcard without fail.
Click to expand...
Click to collapse
T-Mobile in which country?

germany
orangekid said:
T-Mobile in which country?
Click to expand...
Click to collapse

That is so weird. I guess it's possible you have so many bad blocks that your nand is just not usable.
How about if you just run HSPL from the bootloader and flash a custom ROM or flash MAGLDR instead?

I had HSPL 3.03 and 2:08 also tried with a custom rom
Starts only until htc logo.
I had, after I had tried the stockrom via sdcard on it it with HSPL 2:08 task 29, Radio_rom_2_15_50_14
CLK_1_5_HBOOT flashed. Flashing worked without problems.
But the start is just a white screen.
Otherwise I would have just installed Android on SD card.
Can one save what?
orangekid said:
That is so weird. I guess it's possible you have so many bad blocks that your nand is just not usable.
How about if you just run HSPL from the bootloader and flash a custom ROM or flash MAGLDR instead?
Click to expand...
Click to collapse

So let's start over.
You flash HSPL, then task29, then MAGLDR, and just reboot the phone, and it does not boot into magldr?

yes exactly
it only goes to the logo
orangekid said:
So let's start over.
You flash HSPL, then task29, then MAGLDR, and just reboot the phone, and it does not boot into magldr?
Click to expand...
Click to collapse

ernie0124 said:
yes exactly
it only goes to the logo
Click to expand...
Click to collapse
This doesn't make sense.
From HSPL, you flash task29 and it flashes successfully?
Then you go back into HSPL, and flash magldr, and that flashes successfully?
Then you reboot the phone, and it won't make it past the HTC logo?

yes i flashed from HSPL task 29 and it flashed successfully.
Then i go back in to HSPL and flash magldr successfully.
Then i reboot the phone and it starts magldr.
When you start the message is short (Nand kernel open failed)
and it starts in the menu
Then comes the next problem.
I have tried to set up the system environment with the ClockworkMod (to match the rom)
he seems to do well.
Resets but not by itself.
I've just made ​​by hand.
Then I wanted to partition the sd card inserted.
So I went to AD Recovery menu.
There is then another error:
Android Load Raw
(K) 11808000:29 A650 (I) 12800000:136 A22 ......
Load Done
1EFATAL HIT 1
orangekid said:
This doesn't make sense.
From HSPL, you flash task29 and it flashes successfully?
Then you go back into HSPL, and flash magldr, and that flashes successfully?
Then you reboot the phone, and it won't make it past the HTC logo?
Click to expand...
Click to collapse

ernie0124 said:
yes i flashed from HSPL task 29 and it flashed successfully.
Then i go back in to HSPL and flash magldr successfully.
Then i reboot the phone and it starts magldr.
When you start the message is short (Nand kernel open failed)
and it starts in the menu
Click to expand...
Click to collapse
So the magldr menu never comes up?

in the magldr menu every time I come.
(Nand kernel open failed) is that an error message?
orangekid said:
So the magldr menu never comes up?
Click to expand...
Click to collapse

ernie0124 said:
in the magldr menu every time I come.
(Nand kernel open failed) is that an error message?
Click to expand...
Click to collapse
That sounds like a CWM error, not one you'd get just from entering the magldr menu.
As soon as it loads magldr, is there any menu with any choices?
Like flash magldr 1.13 and then does a menu ever come up?
Also, are you flashing HSPL 3.03 or 2.08? You should have 2.08

orangekid said:
That sounds like a CWM error, not one you'd get just from entering the magldr menu.
As soon as it loads magldr, is there any menu with any choices?
Like flash magldr 1.13 and then does a menu ever come up?
Also, are you flashing HSPL 3.03 or 2.08? You should have 2.08
Click to expand...
Click to collapse
"NAND kernel open failed" appears when you try to "Boot AD NAND" from magldr without having a ROM installed.
MAGLDR's menu does show up, because that error is from selecting option #2 (or #1, I don't remember).
He needs now to flash a recovery using "5. USB Flasher", then flash a ROM using that recovery.