My wife's phone runs quadrant standard really slow it takesb like 5 minutes to run with rooted vibrant and lag fix. Plus it's only registering about 750. Please help.
That's normal if you haven't installed a LagFix. Its not a bad thing either, the phone is still plenty fast.
and if you don't want to root and apply the fix, just wait until the froyo update comes out. your numbers then should drastically improve and of course, so should the overall speed.
chronos7 said:
My wife's phone runs quadrant standard really slow it takesb like 5 minutes to run with rooted vibrant and lag fix. Plus it's only registering about 750. Please help.
Click to expand...
Click to collapse
If you're still getting that low of a score, clearly something went wrong with the fix. I would use odin and restore a stock image and then start over if it were me.
djgleebs said:
That's normal if you haven't installed a LagFix. Its not a bad thing either, the phone is still plenty fast.
Click to expand...
Click to collapse
That's NOT normal... It never took my Vibrant or my wife's 5 minutes to run the Quadrant tests, before or after the fix.
chronos7 said:
My wife's phone runs quadrant standard really slow it takesb like 5 minutes to run with rooted vibrant and lag fix. Plus it's only registering about 750. Please help.
Click to expand...
Click to collapse
Which lag fix did you perform cuz the one I performed has my Quadrant scores no lower the 2100? Something went wrong with whatever you did.
Here is what I did with mine and I am now at about 1400 quadrant. I didnt use any lag fix at all. I simply loaded a clean rom copy via oden and then loaded vibrant4. The only change I made was to replace the framework-res.apk file in vibrant4 with the stock one in order to stop the reboots caused by the battery fix.
Thats it been rock solid stable for days now.
I've got a rooted 2.1 stock Vibrant with ryan's lag fix. My quadrant score went from 876 to 2250 which is great. My linpak for android only went from 8.101 to 8.225 mflops. I would really like my mflops to be in the 10-15 range though. It also seems to be running much quicker. Would I see a bigger boost with voodoo or should I just keep ryans lag fix going. Is voodoo just as easy to install to. Also I've been dying for the Frodo OTA. Would both of these lag fixes work for 2.2
Huh. Huhuhuh. He said Frodo. Huhuhuh. Huhuh.
LOL, it's been a funny day today. This is almost as good as the guy who told the noob to put on three lag fixes, so it will be three time's as fast!!! LOL.
Let's all hope Frodo can get the One Ring to Mount Doom in time. Then him and the rest of Samsung dev team might get Froyo done soon. Only then can the world rest and our linpak score possibly rise!
I saw that post to and it was pretty funny. I just want to know the differences between the to lag fixes, and which one is better to have.
How about try them both and you be the judge of it? Results vary on people's setups. If I were you, I would wait for a more stable version of VooDoo.. I have applied it but many people have reported having problems detecting their SD card (external and internal). To fix this, you'd have to restore your apps using Titanium Backup etc etc.
I would definitely say VooDoo, I have used RyanZA and VooDoo. But since you're a new user, I'd just wait for the more stable version.
Does Voodoo reformat the entire SD to ext4 or does it symlink like Ryan's?
If it changes the whole file system to ext4 then I would say it has to be faster.
thanks foe responses, I will wait until voovdoo goes stable an see the performance myself.
Droidicus said:
Huh. Huhuhuh. He said Frodo. Huhuhuh. Huhuh.
Click to expand...
Click to collapse
lolol
________________
you CANT get 10-15 mflops, if you read how the lagfixes work you would understand what you are measuring. i think with OC you might get mid 9's
Hello folks,
I just tried to benchmark my x10 with linpack and got only 6.8 or 6.9 mflops. is this normal, is there anything i can do to make it get a higher score?
I'm using the latest .435 firmware and rooted and have all the junk pps from the 'x10 junk apps' thread removed from my phone.
Thanks for any help.
How does the phone perform? Are you satisfied with it or does it lag considerably? A benchmark really means nothing other than bragging rights. If it feels fast and feels good then why worry about mflops?
Sent from my Delorean using a flux capacitor!
If you look in the developer forum just pick one of the ROMs and you will find info on enabling JIT
Sent from my 2.2.1 Beta4 using XDA App
My score for mflops is always around 39 and my highest is 40+
Sent from my X10i using XDA App
xxcysxx said:
Hello folks,
I just tried to benchmark my x10 with linpack and got only 6.8 or 6.9 mflops. is this normal, is there anything i can do to make it get a higher score?
I'm using the latest .435 firmware and rooted and have all the junk pps from the 'x10 junk apps' thread removed from my phone.
Thanks for any help.
Click to expand...
Click to collapse
whether you updated via flashtool or through seus or pc companion, to optimize your phone is very simple especially if not wanting to root or install custom roms. download latest flash tool, once installed and up and running. make sure your phone is set on debug mode. connect to usb and plug into comp. though you may not want the apps that are in the custom folder. hit the customize button, you can remove them later. you will now notice that the optimize button is now highlighted in black. click on that button and let it install the files. This installs JiTv2 Files. this will bring mflops up and quad scores up. it however will not give very high scores. quad will be around 800-850 tops. mflops will be increased to about 20-30 maybe 35. notice on quad when running the rotating planets test. you might hit 33fps!!! instead of the supposed 30 that its only suppose to get. if you run neocore test you might only peg and 25-28. Good Luck!!
-OP
try running the test again after the unit has settled down (no activity for a while). you might get different results.
hit the customize button, you can remove them later. you will now notice that the optimize button is now highlighted in black. click on that button and let it install the files. This installs JiTv2 Files
Click to expand...
Click to collapse
Hi SErooted,
thank you for your helpfull respond. i pressed the customize and then the optimize button like you said and the phone rebooted and the result was better. linpack now get about 32 and some change, quadrant about 757, and neocore about 21fps, shouldn't neocore get better frame rate than this?
can i get it even faster than this?
i have heard about clearing the dalvik chache when installing JIT for the first time. well i didn't clear any cache when i press that customize or optimizer button. did it do it automatically or do i still have to do it manually?
what i wanted was to have the interface and games run fluid and smooth. like no studder at all.
does the processor throttle down when the system is at idle?
should i overclock?
also, i have notice the video recording in hd mode have less studdering now. though its still there, but less. do you think it probably have anything to do with the memory card performance. i'm still using the stock 8gb that originally came with the phone.
My score for mflops is always around 39 and my highest is 40+
Click to expand...
Click to collapse
hello Michael7168,
thank you for your respond to my message. can you please elaporate more on your statement. is this an x10 you using? i would like to get this result too.
furthermore, i prefer not to use custom firmware at the moment as i use this phone frequently day-to-day and i need to have full functionality of it and reliably. custom firmware are still buggy and lacks some functionality of the phone that i still find usefull for my daily task. but if there is a better custom firmware that really does utilize all of the phone functionality, then please point me in that direction.
xxcysxx said:
Hi SErooted,
thank you for your helpfull respond. i pressed the customize and then the optimize button like you said and the phone rebooted and the result was better. linpack now get about 32 and some change, quadrant about 757, and neocore about 21fps, shouldn't neocore get better frame rate than this?
can i get it even faster than this?
i have heard about clearing the dalvik chache when installing JIT for the first time. well i didn't clear any cache when i press that customize or optimizer button. did it do it automatically or do i still have to do it manually?
what i wanted was to have the interface and games run fluid and smooth. like no studder at all.
does the processor throttle down when the system is at idle?
should i overclock?
also, i have notice the video recording in hd mode have less studdering now. though its still there, but less. do you think it probably have anything to do with the memory card performance. i'm still using the stock 8gb that originally came with the phone.
hello Michael7168,
thank you for your respond to my message. can you please elaporate more on your statement. is this an x10 you using? i would like to get this result too.
furthermore, i prefer not to use custom firmware at the moment as i use this phone frequently day-to-day and i need to have full functionality of it and reliably. custom firmware are still buggy and lacks some functionality of the phone that i still find usefull for my daily task. but if there is a better custom firmware that really does utilize all of the phone functionality, then please point me in that direction.
Click to expand...
Click to collapse
Hello xxcysxx,
yes neocore normally runs higher scores. round about 27-28 avg. i personally havent ran a stock firmware since right around mid december. i have alternated with a few and have finally settled on z.s 2.2b4. and have checked all roms available to find which is best. and custom firmware is sometimes shere you get the desired result. i have done some testing on my x10 with various settings and roms and will be happy to share with you what i have going on. my phone is very responsive. quad scores as of ten minutes ago was 2011 without having overclock widget installed. if yo install overclock widget and max out on screen and off screen min and max to 998mhz, you can achieve slightly higher quad scores. but really not needed if you follow settings below. i have a free app from market sysctl. it works!! not sure if you have read the thread on it yet but if not i will have to post there as i have found perfect settings for performance but at cost of battery drain. install if you have root, if not, the call to root is yours.
if interested.... download sysctl from market.
min free kb: 900000
dirty ratio:500000
dirty background:200000
vfs cache pressure:10
Oom allocating: checked
like i said performance not battery. i know for battery saving settings set these numbers close to what the default are. the lower the better battery, the higher, performance.
if you are really worried about daily performance and custom roms.... when/if you decide. i recommend eminence for 2.1 theme of your choice but i really dig bitsnackers theme its awsome and who wouldnt think a tron looking buzzlightyear isnt cool? its awsome. has a cool bootlogo too. all phone funstionality is there video, camera, flash. EVERYTHING!!
BELOW>>> Optimized, xrecovery, root<<<< ENABLED
if you are interested in a 2.2 rom which really does boost speed on phone and what not. i recommend z's 2.2beta4 as video is not working as of yet you might hold off. if you dont use video you should be ok with camera for now and that works. install gappsfreex10, z's data2sd, and theme of your choice. i like xfx10 cant remember name of creator (sorry) but this theme is great! all of theme are great to be honest this is just the one i use.
2.3 roms are out and they are snappy alone without having any adjustments, however there are things that dont work, camera is really the only thing i can think of right now. but by this time it might be fixed, cant say havent checked status but will when done replying.
you can install and run sysctl on these roms as well and gives great boost.
update: not sure if this is a result of sysctl or problems due to network overrun... mflops as of now are 3.2 i normally run 38+. Mmmmm, I wonder?
update 2: double checked after a little while and low mflops was due to network overload not settings. also once upon reboot from my settings i have a quad score of 2233. screen shot below. mflops picked back up but yet are not as high as usual 34.xx
as well to answer on dalvik cache... yes clear cache and also install cache cleaner from market. i have mine set to clear every twelve hours. when installing custom rom not always a case but recommend to wipe user data as well. a few minutes to reset your phone and make sure everything smooth is worth doing this. as well, clear battery stats.
either way, let me know what you guys think and if these settings help.
SErooted
SErooted said:
Hello xxcysxx,
yes neocore normally runs higher scores. round about 27-28 avg. i personally havent ran a stock firmware since right around mid december. i have alternated with a few and have finally settled on z.s 2.2b4. and have checked all roms available to find which is best. and custom firmware is sometimes shere you get the desired result. i have done some testing on my x10 with various settings and roms and will be happy to share with you what i have going on. my phone is very responsive. quad scores as of ten minutes ago was 2011 without having overclock widget installed. if yo install overclock widget and max out on screen and off screen min and max to 998mhz, you can achieve slightly higher quad scores. but really not needed if you follow settings below. i have a free app from market sysctl. it works!! not sure if you have read the thread on it yet but if not i will have to post there as i have found perfect settings for performance but at cost of battery drain. install if you have root, if not, the call to root is yours.
if interested.... download sysctl from market.
min free kb: 900000
dirty ratio:500000
dirty background:200000
vfs cache pressure:10
Oom allocating: checked
like i said performance not battery. i know for battery saving settings set these numbers close to what the default are. the lower the better battery, the higher, performance.
if you are really worried about daily performance and custom roms.... when/if you decide. i recommend eminence for 2.1 theme of your choice but i really dig bitsnackers theme its awsome and who wouldnt think a tron looking buzzlightyear isnt cool? its awsome. has a cool bootlogo too. all phone funstionality is there video, camera, flash. EVERYTHING!!
BELOW>>> Optimized, xrecovery, root<<<< ENABLED
if you are interested in a 2.2 rom which really does boost speed on phone and what not. i recommend z's 2.2beta4 as video is not working as of yet you might hold off. if you dont use video you should be ok with camera for now and that works. install gappsfreex10, z's data2sd, and theme of your choice. i like xfx10 cant remember name of creator (sorry) but this theme is great! all of theme are great to be honest this is just the one i use.
2.3 roms are out and they are snappy alone without having any adjustments, however there are things that dont work, camera is really the only thing i can think of right now. but by this time it might be fixed, cant say havent checked status but will when done replying.
you can install and run sysctl on these roms as well and gives great boost.
update: not sure if this is a result of sysctl or problems due to network overrun... mflops as of now are 3.2 i normally run 38+. Mmmmm, I wonder?
update 2: double checked after a little while and low mflops was due to network overload not settings. also once upon reboot from my settings i have a quad score of 2233. screen shot below. mflops picked back up but yet are not as high as usual 34.xx
as well to answer on dalvik cache... yes clear cache and also install cache cleaner from market. i have mine set to clear every twelve hours. when installing custom rom not always a case but recommend to wipe user data as well. a few minutes to reset your phone and make sure everything smooth is worth doing this. as well, clear battery stats.
either way, let me know what you guys think and if these settings help.
SErooted
Click to expand...
Click to collapse
holy sh*t. is that benchmark test at the bottom for your X10?
TidusWulf said:
holy sh*t. is that benchmark test at the bottom for your X10?
Click to expand...
Click to collapse
no the one at the top where it says your device. 2233
or how about now after i modded my sysctl settings.screen shot below taken just seconds before this post
xxcysxx said:
Hello folks,
I just tried to benchmark my x10 with linpack and got only 6.8 or 6.9 mflops. is this normal, is there anything i can do to make it get a higher score?
I'm using the latest .435 firmware and rooted and have all the junk pps from the 'x10 junk apps' thread removed from my phone.
Thanks for any help.
Click to expand...
Click to collapse
Install JIT from here.
batman_112 said:
Install JIT from here.
Click to expand...
Click to collapse
Read post on first page
i have alternated with a few and have finally settled on z.s 2.2b4, and have checked all roms available to find which is best. and custom firmware is sometimes shere you get the desired result..
Click to expand...
Click to collapse
thank you for your respond again.
your generic test result has me sold to custom firmware. i want to try it out to see what i'm really missing.
so to your experience, z's 2.2 b4 has all functionality of the device working with only the exception of the video recording? is that correct?
perhaps i can live with that for now. i frequently record my baby playing around the house and playing outside, that's why i prefer to keep the camcorder.
perhaps i will find an old phone laying around in the house just to get by while i'm going on an adventure on custom firmware.
if yo install overclock widget and max out on screen and off screen min and max to 998mhz, you can achieve slightly higher quad scores.
Click to expand...
Click to collapse
will keep this overclocking widget in mind. i just recently learned that you cant clock the processor past 1Ghz without sucessfully cracking the bootloader first. so overclocking is not going anywhere for now.
i have a free app from market sysctl. it works!!
Click to expand...
Click to collapse
yes, i done this already. but still learing on settings.
i have found perfect settings for performance but at cost of battery drain. install if you have root, if not, the call to root is yours.
if interested.... download sysctl from market.
min free kb: 900000
dirty ratio:500000
dirty background:200000
vfs cache pressure:10
Oom allocating: checked
Click to expand...
Click to collapse
on your x10 running at these settings, can you go at least a full day of work on a single charge with frequent text messaging, internet browsing, and phone calls?
no video games or leisure activity involve. full day of work as in taking the phone off the charger in the moning and comming home around eight or nine o'clock in the evening.
i recommend eminence for 2.1 theme of your choice but i really dig bitsnackers theme its awsome and who wouldnt think a tron looking buzzlightyear isnt cool? its awsome. has a cool bootlogo too. all phone funstionality is there video, camera, flash. EVERYTHING!!
Click to expand...
Click to collapse
i'm confused here. is eminence 2.1 a custom firmware or is it a theme for android 2.1 firmware?
if it is a modified sony ericsson 2.1 stock firmware with a different theme, then i'm not interested.
however, if it is a fully ported open source 2.1 android firmware, (not tamper with by sony ericsson) then this is good news. i really hope it is this!
BELOW>>> Optimized, xrecovery, root<<<< ENABLED
Click to expand...
Click to collapse
i have a question about xrecovery.
are you familiar with bare metal restore, acronis true image, or norton ghost.
i use these software to customize my laptop for different occations. whether i use my laptop to play games with my buddies at break hours durring schools, or do homework assignments in the library, or other general work. all i have to do is lay the image at boot and i have a completely different pc. it can be any os using any software customize in anyway, and took about five to ten minutes to lay down the image.
now back to the xrecovery question. can i do a "full backup" or a complete snap shot of the flash of my current android os and then restore it back at a later time in the same state and condition it was in just before i left it?
this is just incase i might have a remorse when i try the custom firmware.
i put a lot of time in making all the settings and adjustments just to the way i like it and i prefer not to have to do it all over again.
I have another question about the JIT software.
how many jit versions are out there?
i'm using the x10 flash tool version 0.2.6 to install the jit software on my phone. do you know what version of jit was distributed with this flash tool version?
thanks again, your time and help is very much appreciated.
your generic test result has me sold to custom firmware. i want to try it out to see what i'm really missing.
Bold step... always worth a shot.
so to your experience, z's 2.2 b4 has all functionality of the device working with only the exception of the video recording? is that correct?
perhaps i can live with that for now. i frequently record my baby playing around the house and playing outside, that's why i prefer to keep the camcorder.
perhaps i will find an old phone laying around in the house just to get by while i'm going on an adventure on custom firmware.
i always keep several older phones for camera use, or other things so this is always a good idea.
will keep this overclocking widget in mind. i just recently learned that you cant clock the processor past 1Ghz without sucessfully cracking the bootloader first. so overclocking is not going anywhere for now.
i agree in holding off, really overclock widget should be utilizes when operating stock 1.6. anything after that 2.1 2.2 2.3 their optimized with jit or are optimized enough without it
on your x10 running at these settings, can you go at least a full day of work on a single charge with frequent text messaging, internet browsing, and phone calls?
no video games or leisure activity involve. full day of work as in taking the phone off the charger in the moning and comming home around eight or nine o'clock in the evening.
these settings, im actually getting stats on this today as i was modding my phone alot yesterday and did not much have chance to let charge until last night. will let you know how well those settings work through out the day.
i'm confused here. is eminence 2.1 a custom firmware or is it a theme for android 2.1 firmware?
if it is a modified sony ericsson 2.1 stock firmware with a different theme, then i'm not interested.
however, if it is a fully ported open source 2.1 android firmware, (not tamper with by sony ericsson) then this is good news. i really hope it is this!
to my knowledge is has not been tampered with by sony, cant recall if the dev had placed any se apks in theme. but it is a great rom. so is blue sparks. if going 2.1 anyway. these are roms and not just themes overlay. so should be as open source as the dev made it.
i have a question about xrecovery, can i do a "full backup" or a complete snap shot of the flash of my current android os and then restore it back at a later time in the same state and condition it was in just before i left it?
this is just incase i might have a remorse when i try the custom firmware.
i put a lot of time in making all the settings and adjustments just to the way i like it and i prefer not to have to do it all over again.
yes you can. when in xrecovery, go to back up and restore. and backup. this will save all settings, phone book, contacts text message, everything! if not happy with custom software you have installed. just go back to xrecovery>backup and restore> restore. back to 2.1 software before the custom rom
I have another question about the JIT software.
how many jit versions are out there?
i'm using the x10 flash tool version 0.2.6 to install the jit software on my phone. do you know what version of jit was distributed with this flash tool version?
the JiT version that is with the new flashtool is JiTv2 i believe.. dont quote me on that. i believe it is as i have looked at the files in the optimizer and compared them to the copy of JiTv2 i have saved on my comp. to my knowledge, there is only two versions. again, dont quote me on it. i havent seen an chatter going on about newer versions so this might be all we get. not sure though
thanks again, your time and help is very much appreciated.[/QUOTE]
always happy to try and help.
http://forum.xda-developers.com/showthread.php?t=935919
Refer this
Cheers!
AdY
SErooted said:
your generic test result has me sold to custom firmware. i want to try it out to see what i'm really missing.
Sorry took so long to kget back to you. hope you catch this.
Sysctl settings really dont make large change in how fast all functions of the phone operate. most increase in performance for settings is shutdown and power on time. as well as a little better scrolling of menus.
basically running the 2.2 software from z or trip, adding the data2sd.zip will get you well into having quad scores of 2+++. if aiming for higher closer to around 3000. which i am very near doing. ill show when i have the proof not till then
anyway, getting mid 2+++ scores and higher, do require using something like set cpu or Overclock widget, in order to get your phone to run at top speed while doing the test..
after that run a test then another and so on until you have achieved what is perfect W/O for you.
Click to expand...
Click to collapse
i did tried the setting parameters you suggested earlier before your latest post and i found the improvement is not that noticable, but the battery did die very quick. i found the original configuration work just fine at this point.
i'm still doing some reading on the custom firmware to make sure i make the proper approach without any hickups. i still have a lot of school work to finish and a part time job so the custom firmware is moving along quite slowly.
I have two questions about the new gingerbread release and I was hoping someone could help me out with them
1) Is there any way to get an uncapped data mod like I have now for liberty? For those who don't know, it just removes the throttling on our data.
2) Inside of the liberty toolbox, there is an option for stagefright. This includes turning on the media HTTP, the media scan, the media meta, and turning on the media player. Is there a way to do this on gingerbread? I like this because this alone has increased my quadrant score to average 2200
Jmoney47 said:
I have two questions about the new gingerbread release and I was hoping someone could help me out with them
1) Is there any way to get an uncapped data mod like I have now for liberty? For those who don't know, it just removes the throttling on our data.
2) Inside of the liberty toolbox, there is an option for stagefright. This includes turning on the media HTTP, the media scan, the media meta, and turning on the media player. Is there a way to do this on gingerbread? I like this because this alone has increased my quadrant score to average 2200
Click to expand...
Click to collapse
Its nice to have a 2200 quadrant but it really doesnt mean much... you will be hitting 2000 with stock GB no over clock... Ive hit 2400 with 1.15 OC... but it doesnt matter. Same with the Data throttle... They only throttle you after like 5 gb of data in the month... are you using that much 3g???
The GB build is legit. Almost bugless, super fast, very nice features. Really with just a bit of minor themeing its perfect. Im interestested to see what sort of tweaks the devs come up with but right off a fresh stock install this rom is awesome... Id say go for it, especially now that its rooted, you dont need to SBF, u can use the Monster update.zip to get back to 2.3.340 if u want (why would you). Do it!
randroid123 said:
Its nice to have a 2200 quadrant but it really doesnt mean much... you will be hitting 2000 with stock GB no over clock... Ive hit 2400 with 1.15 OC... but it doesnt matter. Same with the Data throttle... They only throttle you after like 5 gb of data in the month... are you using that much 3g???
The GB build is legit. Almost bugless, super fast, very nice features. Really with just a bit of minor themeing its perfect. Im interestested to see what sort of tweaks the devs come up with but right off a fresh stock install this rom is awesome... Id say go for it, especially now that its rooted, you dont need to SBF, u can use the Monster update.zip to get back to 2.3.340 if u want (why would you). Do it!
Click to expand...
Click to collapse
I do plan on flashing soon and the part about data yes I do use over 5gb occasionally with tethering and Pandora and the unthrottling just makes me feel good about it
Ok, i'm in the process of running Gingerbreak, and i've got titanium backup installed.
I plan to remove as much bloatware as possible after rooting.
Is there anything else cool i can do with my phone after this? Any overclock, underclock or anything else anyone can recomend for improveded performance/fun/whatever?
grab some emulators for ps one, super nintendo etc etc but as for overclocking and stuff that will be coming along shortly i would imagine devs just need more time
we cant overclock yet because the stock kernel dosent support it, a few people will be working on custom kernels now sony has released a guide for devs, unless you have an unlocked bootloader though, you cannot flash anything. you can underclock with root though
Couldn't get Gingerbreak to work. It get's stuck when running exploit.
So i tried to root it using the manual process, and when i fastboot my phone, win 7 can't find the usb drivers and i cant execute the "fastboot.exe -i 0x0fce getvar version" command because the command window is "waiting for device".
Anyone got any suggestions?
edit - I found a noob guide (perfect for me ), it's late here where i am, i'll try again tomorrow. Looking forward to playing n64 emulator with a speed increase. Mario Kart is a bit choppy every now and again. Also want to get rid off the vodafone crap that is on my phone
I'll post here to say how i got on.
Grab Adfree of the market and get rid of your adds in the browser and apps. Faster fix for a quicker gps lock. Screenshot apps. Busybox installer.
Regards Dousan...
Ok, i eventually got it rooted today. I ended up using gingerbreak.
I decided to give it another go and left it running exploit while i went to the gym. After 2.5 hours i returned and it was rooted.
Previously i left gingerbreak running for 25 minutes and was left thinking it was stuck.
Don't know why it takes so long, but hey, it works in the end.
Removed some bloatware and have 150 meg free space to play around with (was around 40mb before).
Phone boots in around 2 minutes, which was better than the 4+ that it used too.
Interface seems slightly speedier. No improvement really on n64 emulator though, so i guess an overclock will be the only thing to make it better. Not that it's bad, but getting rid of the tiny skips would be nice.
Overall very pleased.
Let's wait for the guru's to get the kernel stuff sorted so we can overclock. Hopefully to a nice 1.2ghz would be pretty awesome, and some custom efficient roms would be great too.
dsswoosh said:
Let's wait for the guru's to get the kernel stuff sorted so we can overclock. Hopefully to a nice 1.2ghz would be pretty awesome, and some custom efficient roms would be great too.
Click to expand...
Click to collapse
1.4 or nothing it will do it easy!
waz000000 said:
1.4 or nothing it will do it easy!
Click to expand...
Click to collapse
I have the same cpu in my DHD (Quallcomm Scorpion), i have had mine o/c up to 2ghz but runs nicely at 1.5-1.7ghz
AndroHero said:
I have the same cpu in my DHD (Quallcomm Scorpion), i have had mine o/c up to 2ghz but runs nicely at 1.5-1.7ghz
Click to expand...
Click to collapse
does that note destroy your battery?
Nhialor said:
does that note destroy your battery?
Click to expand...
Click to collapse
obviously battery life is shorter, but not that much