Related
So, as the title says this is a poll about phone over clocking.
Who's phone is capable of overclocking and who's isn't?
My goal is to find out if there is a way to tell if you can overclock or not based on the phones s/n.
Procedure:
So pick the proper answer on the poll, then if you could please make a post saying whether you can or cannot overclock along with your s/n.
Works
S/N=HTO2SHF05245 B
Doesn't
HT03GHF05302 JV002-00 D
mine does 768..without a hitch.. and doesnt get hot either..will post the sn when i can check my phone.
Example post/my results
I cannot and my serial number is HT03GHF05302 JV002-00 D.
my hero can, yes
I tried several methods of OCing, and finally found one that works for me on another site. I'll PM it to you since I don't know what the rules are on posting links to other sites here.
In short, yes I can, but only using a certain method.
D3FAULT said:
I tried several methods of OCing, and finally found one that works for me on another site. I'll PM it to you since I don't know what the rules are on posting links to other sites here.
In short, yes I can, but only using a certain method.
Click to expand...
Click to collapse
Can you PM me? I'd like to hear about it.
been oc since Toast released his kernel, but I do still get the random fc on incoming calls once or so a week. its annoying but if the call was important they leave a message. The difference in speed is worth it.
OC to 768 with no issues.
D3FAULT said:
I tried several methods of OCing, and finally found one that works for me on another site. I'll PM it to you since I don't know what the rules are on posting links to other sites here.
In short, yes I can, but only using a certain method.
Click to expand...
Click to collapse
D3fault sent me the link and now I can OC up to 710 (768 freezes me). Before he sent me the zip file for the OC stuff I could not run any OC ROM's, no overclock widget, or setcpu. Now I can run overclock widget (LWP flies now) and setcpu. Still can't get all OC'd ROM's to load but it is worlds better than it was.
Lastly, I do get some heat though, oh well.
Here is the link for those who can't get their hero to overclock, try this (courtesy of D3fault, not me). Download and add to your SD, flash, download overclocking program of choice (I really like the OC widget in the market) and done.
http://forum.androidcentral.com/162759-post49.html
I can over clock, have been overclocked and remained on for over a day now. Battery temperature is 24.7 and thats under constant texting and web-browsing throughout the day. Ive downloaded a couple apps as well.
S/N=HTO2SHF05245 B
Ummm, why do you want my S/N #??? My hero is oc'ed an loving it.. depending on what rom i use that day..some get hot, some FC some things...but a few are flawless fer me with a lil tweek here an there
Overclocked to 710 (too squemish to get the higher kernel) and though it sucks through battery like no tomorrow, and the fact that... well.. it didn't speed any lag in the os itself, games and graphics work a hell of a lot quicker!
ROM - Bittersweet v1.2/stock radio/using DialerOne/LauncherPro
Kernel - Toast-godmode OC .29 kernel for DamageControl/based roms
Neocore:
1.5 - 12fps
2.1 - 24/28fps
w/oc kernel - 30/32.8fps
@lokipipin, the OC wants to find if there is a correlation of phones serial number differences to the freq. of people who can't overclock (i.e. it could be a revision, or even a ****ty batch of pcbs or something, and that could be tracked by s/n)
lokipimpin said:
Ummm, why do you want my S/N #??? My hero is oc'ed an loving it.. depending on what rom i use that day..some get hot, some FC some things...but a few are flawless fer me with a lil tweek here an there
Click to expand...
Click to collapse
Well, there's not much i can do with your serial number that will harm you, so don't worry. But i'm looking to find a correlation between serial numbers and chip revisions, which would in turn let us know based on serial number if you can OC and etc.
We did this with the PS3 world a long time ago and it was pretty helpful, i'm surprised no one did it sooner.
And only based off the two that i have already, i can say that maybe the D batch was manufactured with lower quality chips. But that's only based off of two results, just imagine if i had more to compare.
smolck said:
D3fault sent me the link and now I can OC up to 710 (768 freezes me). Before he sent me the zip file for the OC stuff I could not run any OC ROM's, no overclock widget, or setcpu. Now I can run overclock widget (LWP flies now) and setcpu. Still can't get all OC'd ROM's to load but it is worlds better than it was.
Lastly, I do get some heat though, oh well.
Here is the link for those who can't get their hero to overclock, try this (courtesy of D3fault, not me). Download and add to your SD, flash, download overclocking program of choice (I really like the OC widget in the market) and done.
http://forum.androidcentral.com/162759-post49.html
Click to expand...
Click to collapse
What exactly does this do? What does this actually change as far as the rom files? Can i flash this on pretty much any rom that says it OC's?
Pocker09 said:
What exactly does this do? What does this actually change as far as the rom files? Can i flash this on pretty much any rom that says it OC's?
Click to expand...
Click to collapse
Wish I could tell you. All I know is that once I flashed it, I was able to use the OC widget. Prior to the flash it wouldn't work. I am a noob, sorry.
S/N: HTO2AHF01287 JV002-00 C
I can overclock the phone but cannot overclock to 768. Only 710 and staying stable.
Edited my S/N missed a character at the end.
smolck said:
D3fault sent me the link and now I can OC up to 710 (768 freezes me). Before he sent me the zip file for the OC stuff I could not run any OC ROM's, no overclock widget, or setcpu. Now I can run overclock widget (LWP flies now) and setcpu. Still can't get all OC'd ROM's to load but it is worlds better than it was.
Lastly, I do get some heat though, oh well.
Here is the link for those who can't get their hero to overclock, try this (courtesy of D3fault, not me). Download and add to your SD, flash, download overclocking program of choice (I really like the OC widget in the market) and done.
http://forum.androidcentral.com/162759-post49.html
Click to expand...
Click to collapse
Obviously the actual credit for that goes to person who posted it over at Android Central, beezy420. It's worked for me and several others so it's worth a shot if nothing else works for you.
I flashed it to my rooted stock 2.1 and it worked, so give it a shot.
yes my hero is OC'ed with 710
So far I have only tried to OC my Hero once. I did it with Zen's MT3G ROM and it worked, but it definitely created some heat. I think with that one it was OC'd at something like 691. Like I said, phone worked, but it DEFINITELY heated up a LOT more than normal. I can't easily access my s/n right now, so I'll have to update this post when I can.
I can OC to 787 or higher. Been running OC since day one of toast first release 1-2months ago. I have made a few kernels for myself with 787 and once with one a step higher, all booted fine with no reboots.
S/N: HT01YHF02496 JV002-00 C
Why am I getting such low scores? Isn't the average between 30-35
Because you touch yourself at night.
Kiddin' aside, you probably have a lot of things running in the background... Do you have a lot of widgets up and running? Have you disabled the bloatwares yet? If not I'd suggest killing your widgets and disabling a few of those unwanted apps (Finance, Photobucket and etc) and re-run Linpak to see what you get.
I don't use any widgets. I have two picture frames on my mainscreen but that's it. I close the finance widget which always seems to run in the background even though I never use it. Getting around 15-17 now haha.
Nah bro... You can disable the unwanted bloatwares, here... read the thread below in the Dev. section:
Disabling stock apps on the G2 (and other NAND locked devices)
http://forum.xda-developers.com/showthread.php?t=809231
Oh and have you downloaded VISIONary from the market yet? If not I'd highly suggest that you do, it'll temp-root your phone in 1 step! Here's the link on that:
r9: VISIONary - one click temproot for G2
http://forum.xda-developers.com/showthread.php?t=808514
Yeah I appreciate the help but I'm not looking to root right now. I did however score way better in linpack a couple weeks ago though =\
Nobody likes the YouDon'tNeedThat attiude, but I have to ask - why bother benchmarking again? The processor hasn't changed since the last few weeks - it's just a case of backgrounded software.
I ended up running linpack again because I was trying to test some overclocks using this method: watch?v=wToXNT3zIqY (youtube)
Followed the guide step by step. Then at the end I tested linpack and it was low for some reason. So I uninstalled everything.
What helps me or makes me feel better is, root with visionary and clean cache then restart phone.. seems smooth or normal use after even without root.. just makes me feel better because it takes up a lot of MB with those bloatwares.. I just do it once in awhile..
Sent from my T-Mobile G2 using Tapatalk
Hello there XDA I just switched to the Aria from the Captivate. I am new to Android modding, so please bear with me.
I like the phone, It doesnt bother me losing screen space. However it is a bit slow with the 600 MHZ processor.
So if there are some people kind enough to guide me to/through the following it would be appreciated.
1. I would like to overclock it a bit, maybe to 800.
2. General performance tweaks
3. Get rid of Att bloatware
4. Root ( z4root is not in the market anymore and ATT disables side loading.)
Sent from my HTC Liberty using XDA App
Everything u need is in the android Dev. Section for the aria its really simple. To find and to follow..I use cm6 rc2. It overclocks very nicely
Sent from my Liberty using XDA App
Hey Joshua, being new to the Aria as well (less than a month), I haven't looked into overclocking it... but I am running CM 6.1 RC 2, what do I need to do to start overclocking?
Install SetCPU to overclock. I wouldn't go over 825mhz as it starts getting unstable.
As for rooting, search for posts by user asiancuta. He did a really good write up that included a key point I didn't see anywhere else. It's titled NOOBZ: easy guide to rooting your aria.... Read all instructions, and make sure you understand it first.
To install cyanogenmod 6.1 rc2 do a search for That aria - she's so racy!
Sent from my Liberty using XDA App
Mike's Aria said:
Install SetCPU to overclock. I wouldn't go over 825mhz as it starts getting unstable.
Click to expand...
Click to collapse
In the other overclocking thread (or overcloking as the OP spelled it ) several people posted that they were running at 864... what type of instability is likely? Also, doesn't overclocking HAVE to have some sort of adverse effect? Like reduced reliability or an increased likelihood of hardware failure? If there are no adverse effects, why would HTC not set the CPU higher from the factory?
I want to try it, but I feel like I pushed the limits of my comfort zone just by rooting and installing CM...
911jason said:
In the other overclocking thread (or overcloking as the OP spelled it ) several people posted that they were running at 864... what type of instability is likely? Also, doesn't overclocking HAVE to have some sort of adverse effect? Like reduced reliability or an increased likelihood of hardware failure? If there are no adverse effects, why would HTC not set the CPU higher from the factory?
I want to try it, but I feel like I pushed the limits of my comfort zone just by rooting and installing CM...
Click to expand...
Click to collapse
I always lean on the side of caution when it comes to overclocking a phone. I don't want to fry the processor since I can't replace it as easily as one on a computer.
Processors are never set from the factory to run at their fastest.
Sent from my Liberty using XDA App
While it might seem odd since all these phones have the same hardware they don't all respond the same to overclocking. Some people can do 864. I can't even get my phone to do anything over 825 and even 825 gives me issues. I like to keep mine between 768-787. Over doing it can cause damage and shorten the life of the processor but keeping it around 800 is probably safe as long as you moniter temps. Heat is the real enemy here. Manufacturers are trying to balance cost, reliability, battery life. Our little phone use a smaller battery and so a lower clock speed keeps the phone running longer. And the aria is a mid range phone, they don't want it to be faster than the more expensive phones. Also Higher clock speeds will drain your battery faster. At 768 the phone is noticeably snappier and the battery drain over stock isn't even noticeable.
Huh. That's good to know, Callmearia. However I don't even know where to start on any of this. I've never 'flashed' a phone or anything like that before.
Sent from my HTC Liberty using XDA App
This is a really good guide explaining how to root your phone and install a custom recovery, Clockwork, with which you can flash ROMs, make backups, and a bunch of other stuff:
http://forum.xda-developers.com/showthread.php?t=788737
You will still not be able to sideload apps just by rooting though. You will need to flash a ROM in order to do that. Check out the Android Development section, it is all there.
L551 said:
Huh. That's good to know, Callmearia. However I don't even know where to start on any of this. I've never 'flashed' a phone or anything like that before.
Sent from my HTC Liberty using XDA App
Click to expand...
Click to collapse
I think most people can hit 864 now using CM6.1 RC2. I think some tweaks were made to allow it. Before I was only hitting 825mhz or 844mhz when I ran in to stability problems... but now I have none. Or, it could be due to the fact it's colder here now.
Alright, so after some adb troubles with Ubuntu 10.10, I am now rooted, woo!
So now, where to go from here?
This worked flawlessly and easy. Less than 5 minutes
http://forum.xda-developers.com/showpost.php?p=7449486&postcount=1
EDIT : I see that you already got rooted.
You have two choices for Attn1's custom ROMS
Liberated or Cyanogenmod
http://forum.xda-developers.com/showthread.php?t=819715
http://forum.xda-developers.com/showthread.php?t=821642
Take in mind that CM has more customizable features, INCLUDING OVERCLOCKING. Liberated doesn't.
Place the .zip on your SD card. Enter clockworkmod recovery by holding down the volume down button after restarting phone. Wipe Data, Cache, Dalvik Cache. Go to install zip from Sdcard. Pick the file. It should install. wait, and reboot and continue.
Customize it to your liking. Download apps/widgets
Turn off unnecessary background items. (Auto Sync)
Decrease Brightness
Only use GSM networks
(these are battery saving tips....lots more)
http://forum.xda-developers.com/showthread.php?t=505419
That is the SetCPU for XDA members.
To install, go through ADB in the command line, or download FASTAPP Install from the Market and place the .apk on your sd card and install it from there.
kaschenberg said:
I think most people can hit 864 now using CM6.1 RC2. I think some tweaks were made to allow it. Before I was only hitting 825mhz or 844mhz when I ran in to stability problems... but now I have none. Or, it could be due to the fact it's colder here now.
Click to expand...
Click to collapse
That's probably true. I haven't tried going over 825 since way back with dumfuqs kernel.
Alrighty... did all that, now running cyanogenmod on my Aria! \o/
No more ATT bloatware.
I made sure to do a nandroid backup just in case.
Also overclocked to 768MHz. Phone seems a bit quicker.
Thanks guys
Any other tips?
Oh also adb stopped working again on Ubuntu >.< Anyone know how to fix that?
Sent from my Liberty using XDA App
L551 said:
Alrighty... did all that, now running cyanogenmod on my Aria! \o/
No more ATT bloatware.
I made sure to do a nandroid backup just in case.
Also overclocked to 768MHz. Phone seems a bit quicker.
Thanks guys
Any other tips?
Oh also adb stopped working again on Ubuntu >.< Anyone know how to fix that?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Make sure you install the google apps package.
Also, Not too sure.
I use windows. Works perfectly on there. try that
Yup I made sure to install that. Need my market.
I'll see if it works on windows later.
Sent from my Liberty using XDA App
L551 said:
Alrighty... did all that, now running cyanogenmod on my Aria! \o/
No more ATT bloatware.
I made sure to do a nandroid backup just in case.
Also overclocked to 768MHz. Phone seems a bit quicker.
Thanks guys
Any other tips?
Oh also adb stopped working again on Ubuntu >.< Anyone know how to fix that?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Try leaving the OC alone after the reflash.. It's defaulted to 864mhz and it works flawlessly for me.
It was default 600MHz for me.
EDIT: Holding down 1 to access voicemail no longer works, as there is no voicemail number in the options. What is it?
Sent from my Liberty using XDA App
L551 said:
It was default 600MHz for me.
EDIT: Holding down 1 to access voicemail no longer works, as there is no voicemail number in the options. What is it?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Its different for every one. My VM is a local number. You can always just use your phone number.
I recently set my VM to go thru my Google Voice number now.
Sent from my Liberty using XDA App
Using my own number worked.
However, now my phone is freezing randomly, and causing the launcher to hang. (ADW and LauncherPro both do this)
It seems android.process.acore always takes alot of CPU time when it does this.
Hello folks,
I just tried to benchmark my x10 with linpack and got only 6.8 or 6.9 mflops. is this normal, is there anything i can do to make it get a higher score?
I'm using the latest .435 firmware and rooted and have all the junk pps from the 'x10 junk apps' thread removed from my phone.
Thanks for any help.
How does the phone perform? Are you satisfied with it or does it lag considerably? A benchmark really means nothing other than bragging rights. If it feels fast and feels good then why worry about mflops?
Sent from my Delorean using a flux capacitor!
If you look in the developer forum just pick one of the ROMs and you will find info on enabling JIT
Sent from my 2.2.1 Beta4 using XDA App
My score for mflops is always around 39 and my highest is 40+
Sent from my X10i using XDA App
xxcysxx said:
Hello folks,
I just tried to benchmark my x10 with linpack and got only 6.8 or 6.9 mflops. is this normal, is there anything i can do to make it get a higher score?
I'm using the latest .435 firmware and rooted and have all the junk pps from the 'x10 junk apps' thread removed from my phone.
Thanks for any help.
Click to expand...
Click to collapse
whether you updated via flashtool or through seus or pc companion, to optimize your phone is very simple especially if not wanting to root or install custom roms. download latest flash tool, once installed and up and running. make sure your phone is set on debug mode. connect to usb and plug into comp. though you may not want the apps that are in the custom folder. hit the customize button, you can remove them later. you will now notice that the optimize button is now highlighted in black. click on that button and let it install the files. This installs JiTv2 Files. this will bring mflops up and quad scores up. it however will not give very high scores. quad will be around 800-850 tops. mflops will be increased to about 20-30 maybe 35. notice on quad when running the rotating planets test. you might hit 33fps!!! instead of the supposed 30 that its only suppose to get. if you run neocore test you might only peg and 25-28. Good Luck!!
-OP
try running the test again after the unit has settled down (no activity for a while). you might get different results.
hit the customize button, you can remove them later. you will now notice that the optimize button is now highlighted in black. click on that button and let it install the files. This installs JiTv2 Files
Click to expand...
Click to collapse
Hi SErooted,
thank you for your helpfull respond. i pressed the customize and then the optimize button like you said and the phone rebooted and the result was better. linpack now get about 32 and some change, quadrant about 757, and neocore about 21fps, shouldn't neocore get better frame rate than this?
can i get it even faster than this?
i have heard about clearing the dalvik chache when installing JIT for the first time. well i didn't clear any cache when i press that customize or optimizer button. did it do it automatically or do i still have to do it manually?
what i wanted was to have the interface and games run fluid and smooth. like no studder at all.
does the processor throttle down when the system is at idle?
should i overclock?
also, i have notice the video recording in hd mode have less studdering now. though its still there, but less. do you think it probably have anything to do with the memory card performance. i'm still using the stock 8gb that originally came with the phone.
My score for mflops is always around 39 and my highest is 40+
Click to expand...
Click to collapse
hello Michael7168,
thank you for your respond to my message. can you please elaporate more on your statement. is this an x10 you using? i would like to get this result too.
furthermore, i prefer not to use custom firmware at the moment as i use this phone frequently day-to-day and i need to have full functionality of it and reliably. custom firmware are still buggy and lacks some functionality of the phone that i still find usefull for my daily task. but if there is a better custom firmware that really does utilize all of the phone functionality, then please point me in that direction.
xxcysxx said:
Hi SErooted,
thank you for your helpfull respond. i pressed the customize and then the optimize button like you said and the phone rebooted and the result was better. linpack now get about 32 and some change, quadrant about 757, and neocore about 21fps, shouldn't neocore get better frame rate than this?
can i get it even faster than this?
i have heard about clearing the dalvik chache when installing JIT for the first time. well i didn't clear any cache when i press that customize or optimizer button. did it do it automatically or do i still have to do it manually?
what i wanted was to have the interface and games run fluid and smooth. like no studder at all.
does the processor throttle down when the system is at idle?
should i overclock?
also, i have notice the video recording in hd mode have less studdering now. though its still there, but less. do you think it probably have anything to do with the memory card performance. i'm still using the stock 8gb that originally came with the phone.
hello Michael7168,
thank you for your respond to my message. can you please elaporate more on your statement. is this an x10 you using? i would like to get this result too.
furthermore, i prefer not to use custom firmware at the moment as i use this phone frequently day-to-day and i need to have full functionality of it and reliably. custom firmware are still buggy and lacks some functionality of the phone that i still find usefull for my daily task. but if there is a better custom firmware that really does utilize all of the phone functionality, then please point me in that direction.
Click to expand...
Click to collapse
Hello xxcysxx,
yes neocore normally runs higher scores. round about 27-28 avg. i personally havent ran a stock firmware since right around mid december. i have alternated with a few and have finally settled on z.s 2.2b4. and have checked all roms available to find which is best. and custom firmware is sometimes shere you get the desired result. i have done some testing on my x10 with various settings and roms and will be happy to share with you what i have going on. my phone is very responsive. quad scores as of ten minutes ago was 2011 without having overclock widget installed. if yo install overclock widget and max out on screen and off screen min and max to 998mhz, you can achieve slightly higher quad scores. but really not needed if you follow settings below. i have a free app from market sysctl. it works!! not sure if you have read the thread on it yet but if not i will have to post there as i have found perfect settings for performance but at cost of battery drain. install if you have root, if not, the call to root is yours.
if interested.... download sysctl from market.
min free kb: 900000
dirty ratio:500000
dirty background:200000
vfs cache pressure:10
Oom allocating: checked
like i said performance not battery. i know for battery saving settings set these numbers close to what the default are. the lower the better battery, the higher, performance.
if you are really worried about daily performance and custom roms.... when/if you decide. i recommend eminence for 2.1 theme of your choice but i really dig bitsnackers theme its awsome and who wouldnt think a tron looking buzzlightyear isnt cool? its awsome. has a cool bootlogo too. all phone funstionality is there video, camera, flash. EVERYTHING!!
BELOW>>> Optimized, xrecovery, root<<<< ENABLED
if you are interested in a 2.2 rom which really does boost speed on phone and what not. i recommend z's 2.2beta4 as video is not working as of yet you might hold off. if you dont use video you should be ok with camera for now and that works. install gappsfreex10, z's data2sd, and theme of your choice. i like xfx10 cant remember name of creator (sorry) but this theme is great! all of theme are great to be honest this is just the one i use.
2.3 roms are out and they are snappy alone without having any adjustments, however there are things that dont work, camera is really the only thing i can think of right now. but by this time it might be fixed, cant say havent checked status but will when done replying.
you can install and run sysctl on these roms as well and gives great boost.
update: not sure if this is a result of sysctl or problems due to network overrun... mflops as of now are 3.2 i normally run 38+. Mmmmm, I wonder?
update 2: double checked after a little while and low mflops was due to network overload not settings. also once upon reboot from my settings i have a quad score of 2233. screen shot below. mflops picked back up but yet are not as high as usual 34.xx
as well to answer on dalvik cache... yes clear cache and also install cache cleaner from market. i have mine set to clear every twelve hours. when installing custom rom not always a case but recommend to wipe user data as well. a few minutes to reset your phone and make sure everything smooth is worth doing this. as well, clear battery stats.
either way, let me know what you guys think and if these settings help.
SErooted
SErooted said:
Hello xxcysxx,
yes neocore normally runs higher scores. round about 27-28 avg. i personally havent ran a stock firmware since right around mid december. i have alternated with a few and have finally settled on z.s 2.2b4. and have checked all roms available to find which is best. and custom firmware is sometimes shere you get the desired result. i have done some testing on my x10 with various settings and roms and will be happy to share with you what i have going on. my phone is very responsive. quad scores as of ten minutes ago was 2011 without having overclock widget installed. if yo install overclock widget and max out on screen and off screen min and max to 998mhz, you can achieve slightly higher quad scores. but really not needed if you follow settings below. i have a free app from market sysctl. it works!! not sure if you have read the thread on it yet but if not i will have to post there as i have found perfect settings for performance but at cost of battery drain. install if you have root, if not, the call to root is yours.
if interested.... download sysctl from market.
min free kb: 900000
dirty ratio:500000
dirty background:200000
vfs cache pressure:10
Oom allocating: checked
like i said performance not battery. i know for battery saving settings set these numbers close to what the default are. the lower the better battery, the higher, performance.
if you are really worried about daily performance and custom roms.... when/if you decide. i recommend eminence for 2.1 theme of your choice but i really dig bitsnackers theme its awsome and who wouldnt think a tron looking buzzlightyear isnt cool? its awsome. has a cool bootlogo too. all phone funstionality is there video, camera, flash. EVERYTHING!!
BELOW>>> Optimized, xrecovery, root<<<< ENABLED
if you are interested in a 2.2 rom which really does boost speed on phone and what not. i recommend z's 2.2beta4 as video is not working as of yet you might hold off. if you dont use video you should be ok with camera for now and that works. install gappsfreex10, z's data2sd, and theme of your choice. i like xfx10 cant remember name of creator (sorry) but this theme is great! all of theme are great to be honest this is just the one i use.
2.3 roms are out and they are snappy alone without having any adjustments, however there are things that dont work, camera is really the only thing i can think of right now. but by this time it might be fixed, cant say havent checked status but will when done replying.
you can install and run sysctl on these roms as well and gives great boost.
update: not sure if this is a result of sysctl or problems due to network overrun... mflops as of now are 3.2 i normally run 38+. Mmmmm, I wonder?
update 2: double checked after a little while and low mflops was due to network overload not settings. also once upon reboot from my settings i have a quad score of 2233. screen shot below. mflops picked back up but yet are not as high as usual 34.xx
as well to answer on dalvik cache... yes clear cache and also install cache cleaner from market. i have mine set to clear every twelve hours. when installing custom rom not always a case but recommend to wipe user data as well. a few minutes to reset your phone and make sure everything smooth is worth doing this. as well, clear battery stats.
either way, let me know what you guys think and if these settings help.
SErooted
Click to expand...
Click to collapse
holy sh*t. is that benchmark test at the bottom for your X10?
TidusWulf said:
holy sh*t. is that benchmark test at the bottom for your X10?
Click to expand...
Click to collapse
no the one at the top where it says your device. 2233
or how about now after i modded my sysctl settings.screen shot below taken just seconds before this post
xxcysxx said:
Hello folks,
I just tried to benchmark my x10 with linpack and got only 6.8 or 6.9 mflops. is this normal, is there anything i can do to make it get a higher score?
I'm using the latest .435 firmware and rooted and have all the junk pps from the 'x10 junk apps' thread removed from my phone.
Thanks for any help.
Click to expand...
Click to collapse
Install JIT from here.
batman_112 said:
Install JIT from here.
Click to expand...
Click to collapse
Read post on first page
i have alternated with a few and have finally settled on z.s 2.2b4, and have checked all roms available to find which is best. and custom firmware is sometimes shere you get the desired result..
Click to expand...
Click to collapse
thank you for your respond again.
your generic test result has me sold to custom firmware. i want to try it out to see what i'm really missing.
so to your experience, z's 2.2 b4 has all functionality of the device working with only the exception of the video recording? is that correct?
perhaps i can live with that for now. i frequently record my baby playing around the house and playing outside, that's why i prefer to keep the camcorder.
perhaps i will find an old phone laying around in the house just to get by while i'm going on an adventure on custom firmware.
if yo install overclock widget and max out on screen and off screen min and max to 998mhz, you can achieve slightly higher quad scores.
Click to expand...
Click to collapse
will keep this overclocking widget in mind. i just recently learned that you cant clock the processor past 1Ghz without sucessfully cracking the bootloader first. so overclocking is not going anywhere for now.
i have a free app from market sysctl. it works!!
Click to expand...
Click to collapse
yes, i done this already. but still learing on settings.
i have found perfect settings for performance but at cost of battery drain. install if you have root, if not, the call to root is yours.
if interested.... download sysctl from market.
min free kb: 900000
dirty ratio:500000
dirty background:200000
vfs cache pressure:10
Oom allocating: checked
Click to expand...
Click to collapse
on your x10 running at these settings, can you go at least a full day of work on a single charge with frequent text messaging, internet browsing, and phone calls?
no video games or leisure activity involve. full day of work as in taking the phone off the charger in the moning and comming home around eight or nine o'clock in the evening.
i recommend eminence for 2.1 theme of your choice but i really dig bitsnackers theme its awsome and who wouldnt think a tron looking buzzlightyear isnt cool? its awsome. has a cool bootlogo too. all phone funstionality is there video, camera, flash. EVERYTHING!!
Click to expand...
Click to collapse
i'm confused here. is eminence 2.1 a custom firmware or is it a theme for android 2.1 firmware?
if it is a modified sony ericsson 2.1 stock firmware with a different theme, then i'm not interested.
however, if it is a fully ported open source 2.1 android firmware, (not tamper with by sony ericsson) then this is good news. i really hope it is this!
BELOW>>> Optimized, xrecovery, root<<<< ENABLED
Click to expand...
Click to collapse
i have a question about xrecovery.
are you familiar with bare metal restore, acronis true image, or norton ghost.
i use these software to customize my laptop for different occations. whether i use my laptop to play games with my buddies at break hours durring schools, or do homework assignments in the library, or other general work. all i have to do is lay the image at boot and i have a completely different pc. it can be any os using any software customize in anyway, and took about five to ten minutes to lay down the image.
now back to the xrecovery question. can i do a "full backup" or a complete snap shot of the flash of my current android os and then restore it back at a later time in the same state and condition it was in just before i left it?
this is just incase i might have a remorse when i try the custom firmware.
i put a lot of time in making all the settings and adjustments just to the way i like it and i prefer not to have to do it all over again.
I have another question about the JIT software.
how many jit versions are out there?
i'm using the x10 flash tool version 0.2.6 to install the jit software on my phone. do you know what version of jit was distributed with this flash tool version?
thanks again, your time and help is very much appreciated.
your generic test result has me sold to custom firmware. i want to try it out to see what i'm really missing.
Bold step... always worth a shot.
so to your experience, z's 2.2 b4 has all functionality of the device working with only the exception of the video recording? is that correct?
perhaps i can live with that for now. i frequently record my baby playing around the house and playing outside, that's why i prefer to keep the camcorder.
perhaps i will find an old phone laying around in the house just to get by while i'm going on an adventure on custom firmware.
i always keep several older phones for camera use, or other things so this is always a good idea.
will keep this overclocking widget in mind. i just recently learned that you cant clock the processor past 1Ghz without sucessfully cracking the bootloader first. so overclocking is not going anywhere for now.
i agree in holding off, really overclock widget should be utilizes when operating stock 1.6. anything after that 2.1 2.2 2.3 their optimized with jit or are optimized enough without it
on your x10 running at these settings, can you go at least a full day of work on a single charge with frequent text messaging, internet browsing, and phone calls?
no video games or leisure activity involve. full day of work as in taking the phone off the charger in the moning and comming home around eight or nine o'clock in the evening.
these settings, im actually getting stats on this today as i was modding my phone alot yesterday and did not much have chance to let charge until last night. will let you know how well those settings work through out the day.
i'm confused here. is eminence 2.1 a custom firmware or is it a theme for android 2.1 firmware?
if it is a modified sony ericsson 2.1 stock firmware with a different theme, then i'm not interested.
however, if it is a fully ported open source 2.1 android firmware, (not tamper with by sony ericsson) then this is good news. i really hope it is this!
to my knowledge is has not been tampered with by sony, cant recall if the dev had placed any se apks in theme. but it is a great rom. so is blue sparks. if going 2.1 anyway. these are roms and not just themes overlay. so should be as open source as the dev made it.
i have a question about xrecovery, can i do a "full backup" or a complete snap shot of the flash of my current android os and then restore it back at a later time in the same state and condition it was in just before i left it?
this is just incase i might have a remorse when i try the custom firmware.
i put a lot of time in making all the settings and adjustments just to the way i like it and i prefer not to have to do it all over again.
yes you can. when in xrecovery, go to back up and restore. and backup. this will save all settings, phone book, contacts text message, everything! if not happy with custom software you have installed. just go back to xrecovery>backup and restore> restore. back to 2.1 software before the custom rom
I have another question about the JIT software.
how many jit versions are out there?
i'm using the x10 flash tool version 0.2.6 to install the jit software on my phone. do you know what version of jit was distributed with this flash tool version?
the JiT version that is with the new flashtool is JiTv2 i believe.. dont quote me on that. i believe it is as i have looked at the files in the optimizer and compared them to the copy of JiTv2 i have saved on my comp. to my knowledge, there is only two versions. again, dont quote me on it. i havent seen an chatter going on about newer versions so this might be all we get. not sure though
thanks again, your time and help is very much appreciated.[/QUOTE]
always happy to try and help.
http://forum.xda-developers.com/showthread.php?t=935919
Refer this
Cheers!
AdY
SErooted said:
your generic test result has me sold to custom firmware. i want to try it out to see what i'm really missing.
Sorry took so long to kget back to you. hope you catch this.
Sysctl settings really dont make large change in how fast all functions of the phone operate. most increase in performance for settings is shutdown and power on time. as well as a little better scrolling of menus.
basically running the 2.2 software from z or trip, adding the data2sd.zip will get you well into having quad scores of 2+++. if aiming for higher closer to around 3000. which i am very near doing. ill show when i have the proof not till then
anyway, getting mid 2+++ scores and higher, do require using something like set cpu or Overclock widget, in order to get your phone to run at top speed while doing the test..
after that run a test then another and so on until you have achieved what is perfect W/O for you.
Click to expand...
Click to collapse
i did tried the setting parameters you suggested earlier before your latest post and i found the improvement is not that noticable, but the battery did die very quick. i found the original configuration work just fine at this point.
i'm still doing some reading on the custom firmware to make sure i make the proper approach without any hickups. i still have a lot of school work to finish and a part time job so the custom firmware is moving along quite slowly.
Just wondering what you are all clocked at
and if stable.
Currently at 1.4 myself and running smooth
MJ-12
I don't even know how to overclock it. Does one need a custom ROM for that or does the stock one suffice? Not that it really matters, I mostly just read comics or books or watch movies on my tablet, none of which needs that much CPU.
Greece during the summer can get quite hot, so it's definitely not a friendly place for overclockers, even desktop rigs can feel the extra heat, so for me, overclocking will not happen for another 3 months minimum. Even now, at stock 3.1 the tablet can get pretty hot when playing some HD games.
I'm sure only root is required but I agree - pushing the cores for nothing more than reading, watching movies or playing already tablet optimized games seems like a pointless endeavor and certainly dangerous to the long term health of the tablet.
http://imageshack.us/photo/my-images/20/device20110712225412.png/
I am happily running mine @ 1.6 and very stable with no fc. Did have it higher @ 1.7 but had major problems with reeboots. Benchmark above taken with current rom @1.6
Try "StabilityTest" from the Market to see what your device can handle.
Mine ran 2 hours without problems on 1.5GHz but crashed after 17mins on 1.6GHz.
Running the tablet at 1.5GHz makes a big difference, everything is much more responsive and the browser is way faster.
Can you suggest me the right app to overclock my iconia? And what I have to do to set that apps? I had some doubts with options like "interactive, on demand, ...etc". Which one could give a little bit of stability? I can't find any guide on the internet to understand what these settings change, and which one is the better way to optimize our tablet.
setCPU works fine if rooted; you can also use the Virtuous method if you run one of their ROMs; check the DEV sections for more info...
jabbermacy said:
setCPU works fine if rooted; you can also use the Virtuous method if you run one of their ROMs; check the DEV sections for more info...
Click to expand...
Click to collapse
Not sure setcpu works on both cores.
Use the virtuous method it is a new way to overclock and it is faster than using any app...
Lets face it anyone running a rom I am sure it is virtuous something
Thanks Trinnity66 and MJ-12. I think you've finally convinced me to root this device and run a custom ROM.
rasmith3530 said:
Thanks Trinnity66 and MJ-12. I think you've finally convinced me to root this device and run a custom ROM.
Click to expand...
Click to collapse
You are welcome, if you do it right you will love the difference. I use the galaxy Rom tried the 3.2 xoom. But galaxy tab Rom is so nice and very smooth
Goodluck.
MJ-12
just in case people doesnt know
the mainboard are stressed on a bench before go outside and get sell
put the mainboard in a OVEN (not yours at home, it's a special OVEN) then after 1 hour at something like 60 - 70 degrees running
All mainboard got an error are returned to check and fixed
but
overclocking does not give you that much improvement...
for sure optimized kernel with slight overclock are running smother than the stock stuck at 1GHz but.... when people are crying to have not enought battery... why overclocking ???? the things who use more battery is the SOC and the SCREEN....
I run for now Stock 4.010.24 with Stock Kernel (I will go back to custom firwmare when all will be ok and stable)
games are running perfectly... when they are dev for the tegra
sanaell said:
the mainboard are stressed on a bench before go outside and get sell
put the mainboard in a OVEN (not yours at home, it's a special OVEN) then after 1 hour at something like 60 - 70 degrees running
All mainboard got an error are returned to check and fixed
Click to expand...
Click to collapse
What the hell are you babbling about and what does that even have to do with the discussion?
I don't even know if I understand you correctly since you're not even trying to make coherent sentences, but if you're referring to components on the motherboard being loose then there's WAY better ways of fixing that than throwing the whole thing in an oven of any kind. You should NEVER fry the whole motherboard just to fix one or two components that are loose, instead just apply a heatgun on those specific components. Besides, AFAIK none of the issues with A500 are related to loose parts...
His post has everyting to do with this thread and nothing about "loose parts" He is refering to the physical conditions the parts are subject to ie......Heat. Which in turn is increased by overclocking the passively cooled processor. Which is not very efficent and can easily overheat. Its ok if you don't understand plain English, but your post is obnoxious...
Svo86 said:
His post has everyting to do with this thread and nothing about "loose parts" He is refering to the physical conditions the parts are subject to ie......Heat. Which in turn is increased by overclocking the passively cooled processor. Which is not very efficent and can easily overheat. Its ok if you don't understand plain English, but your post is obnoxious...
Click to expand...
Click to collapse
My english is not high but I think I was clear, proof someone understand what I was speaking about.
I forgot the most important
ARM Cortex-A9 MPCore can go between 800Mhz and 2Ghz if someone find a way to cool it, well maybe the tablet will go until 2Ghz (reducing the battery life a lot, something near of the W500 ..._)