Database Users

ActiveSync Connects and Disconnects

I have a new problem with ActiveSync.
When i connect my cradle to the laptop (via usb) activesync connects to the device, i hear the nice connected sound from my speakers and the green activesync wheel starts turning while it displays a "looking for changes" message...
My device shows that its connected via activesync and the tray icon is visible.
After a few seconds, i hear the disconnect sound, Activesync disconnects and the tray icon on my ppc disappears. However the wheel in Activesync remains turning for a while and then it also stops, becomes grey and it says "not connected".
This happens whether i connect via usb or bluetooth. in both cases it connects adn then disconnects. i have removed the partnership, uninstalled activesync on my PC and reinstalled it and recreated the partnership but still nothing doing.
I hate ActiveSync...
help Sad

I have the same proble. I have no firewall, tried reinstalling activesync, outlook, cleaned the registry, checked the network setting, changed the usb cable. Still nothing...Can someone help me out with this.

lads ,
has happened to me to,has an auto update caused this
rob

check you PC Sychronization Options
Programs>ActiveSync>Tools>Options>tab PC>Options
Does is say
When Syncing Remotely
(O)Maintain Connection
( )Disconnect when done
Try checking or selecting Maintain connection.

check you PC Sychronization Options
Programs>ActiveSync>Tools>Options>tab PC>Options
Does is say
When Syncing Remotely
(O)Maintain Connection
( )Disconnect when done
Try checking or selecting Maintain connection.

Choose Intelligently between Wifi, USB, or GPRS

I have a problem where I have my Prophet connected via USB to my computer, which in turn has a broadband connection. It can connect just fine through this connection, but I have remove my MEdia Net (cingular) from drop down choice in my Connection Settings page. But then when USB isn't connected, I have to go back and choose MEdia Net on drop down choice for internet so it will connect to GPRS. When connected via Wifi, I don't have this problem. It seems to automatically see that the Wifi is on and so connects to internet via this, instead of GPRS. How can I do it so that there's this intelligent choosing of USB over GPRS, that way it'll only connect via GPRS when there's no Wifi or USB.

WiFi Help

Why can't I connect to my wireless network with WiFi when i'm not connected to my computer, like it would be nice if I go into the living room and I can check myspace w/o going back into my room and go on my computer, having my phone connected to my computer with internet is kinda pointless becasue my computer has internet lol,
Help GREATLY APPRECIATED..

Does it see your wireless router?
Have you connected wirelessly with any other computers?

when its not connected to my computer i creat a new connection and i try to connect to it and the connection i connect to on my computer flashes on the screen, so its there i guess i just cant get to it i guess, when its connected to my computer i can see 3 diffrent connections but when im not connected i can't..

If you are trying to connect wireless to a router with a titan it should be as simple as turning the wifi switch on.

also you need to change the power mode under settings connection.wirelesslan. power mode to best performance. nothing else works but best performance

Yes, it's set on best performance, and I have a Mogul 6800, I have my modem in my office, and my computer in my room, when I disconnect my phone form my computer the internet cuts off on my phone, when I try to connect when it's disconnected to my computer it says unavalible..

Laptop does not see my tethered mogul

I was trying to tether to my laptop today and it seems that my laptop does not see the USB connection. I set my phone to internet sharing and connection of usb and phone as modem I then press connect it goes out and connects to evdo then it says check usb cable connnection. I then plug into my usb cable. Nothing happens except my charging light comes on. I know my phone works as I just tried it out on my co-workers laptop same procedure same cable and it connects without issue. I just downloaded the wmodem.zip installed it same issue. I Also tried to connect it first before I go to internet sharing. It connects to active sync then I start the connection and active sync goes away but I get the same message on my phone "check usb cable connection".

Bluetooth?
I had the same problem with mine and the usb connection. I think it needs drivers. if you look in device manager you might see a device with out drivers. If your buddys works find out what driver it's using..
I just use bluetooth. it works great if you have it.

Figured it out. In my network connections window when my phone would connect it would appear here under LAN or high speed internet connection. but it was in a disabled state so I enabled it and works like a charm.
Thanks for everyones help!

WiFi Issues

So I have WiFi setup at work and it seems to be working, albeit slow but working.
When I plug the phone into the laptop via USB to charge the phone, the wireless connection is no longer available.(START>SETTINGS>CONNECTIONS>WIFI)
However when I unplug the X2 from the micro USB, the icon comes back and I have a wireless connection.
Is there a setting that I need to adjust for USB connection?
Another question:
Before i connect to WiFi I see the E at the top right of the phone. When I connect to WiFi the E is replaced by the WiFi icon. So I am assuming that my E (EDGE) connection is NOT being used at all when WiFi is on?
In other words, when I am using WiFi, is the internet service from my cellular provider, T-Mobil, completely disconnected? And then when I disconnect from WiFi does the phone internet service go back on to T-Mobil?
Thanks,
xwing

For WIfi + USB, i will test it for you tonight at home,
As for Edge and Wifi, yes, when you are connected to wifi, your cellular data connection is not used anymore for internet connection (and actually why do you need it?) However if you connect your phone via USB and allow to use the internet connection from it, your data connection from your Cellular still active. It allows to differentiate the 2 active sync connections, as each connection has its own properties for which items to be synced. so i wonder why Wifi and USB is not...

So now I have had the device for over a week and find that after a while, 2-4 hrs or longer, the WiFi just does not work. I go to settings>connections> WiFi and I am told to enable WiFi on my device. Then there is a list of about 10 different connections to choose from.
The only way to connect to my WiFi is to turn off the phone and back on (waiting at least 2 min) for the phone to load up.
Any suggestions?