I have a new problem with ActiveSync.
When i connect my cradle to the laptop (via usb) activesync connects to the device, i hear the nice connected sound from my speakers and the green activesync wheel starts turning while it displays a "looking for changes" message...
My device shows that its connected via activesync and the tray icon is visible.
After a few seconds, i hear the disconnect sound, Activesync disconnects and the tray icon on my ppc disappears. However the wheel in Activesync remains turning for a while and then it also stops, becomes grey and it says "not connected".
This happens whether i connect via usb or bluetooth. in both cases it connects adn then disconnects. i have removed the partnership, uninstalled activesync on my PC and reinstalled it and recreated the partnership but still nothing doing.
I hate ActiveSync...
help Sad
I have the same proble. I have no firewall, tried reinstalling activesync, outlook, cleaned the registry, checked the network setting, changed the usb cable. Still nothing...Can someone help me out with this.
lads ,
has happened to me to,has an auto update caused this
rob
check you PC Sychronization Options
Programs>ActiveSync>Tools>Options>tab PC>Options
Does is say
When Syncing Remotely
(O)Maintain Connection
( )Disconnect when done
Try checking or selecting Maintain connection.
check you PC Sychronization Options
Programs>ActiveSync>Tools>Options>tab PC>Options
Does is say
When Syncing Remotely
(O)Maintain Connection
( )Disconnect when done
Try checking or selecting Maintain connection.
Related
Have got ActiveSync V3.7.1 but have problems connecting the XDA2 after it has been initially bonded via USB. After I bond it for the first time, whether or not it will connect is completely random, some days it will but more often than not it won't connect.
When I place the XDA2 in the cradle, XDA2 turns on and the signal bar changes as if you were connecting to internet. On the desktop the activesync icon turns green and tries to connect. However, after a second the screen on the XDA2 appears to 'refresh' and the signal bar returns back to normal and I cannot sync. The poor desktop meanwhile still attempts to connect to no avail.
Soft resets don't work, re-installing ActiveSync doesn't fix the problem either. Removed all partnerships and can connect and sync first time round when you bond the devices, but after that, I get problems. Can anybody help?
Anybody?
I have a big problem. I deletet the Bluetooth-Link to my Laptop, and when i want to reconnect via Active Sync, it always says that there is no Connection to a PC. When I tried to reconnect to the Laptop, there is no Checkbox for ActiveSync anymore...
dears
fuzzi
you need to search the device from the laptop and pair it from there. AS over BT didn't work for me (same error message) when I paired my TyTN with my laptop from the TyTN
Still no ActiveSync Checkbox
I tried it, but there is still no Checkbox for ActiveSync...
fuzzi
Keep messing with it
Make sure you have the com port specified under ActiveSync connection settings on the PC. On mine it is com7. Once that was done, I then initiated a bluetooth connection from the PPC, set up the new connection and then had to mess with it, going back, removing and re installing it on the PPC until finally the check box came up. Frankly there was no apparent science or logic to why the check box finally came up. I just had to keep messing with mine to get the check box to come up.
Bit of a wierd one this...
I'm trying to sync my M700 with Outlook (from Office Pro 2003) using ActiveSync 4.5 on my Dell M70 laptop. Works fine at home, but fails at work with a synchronisation error. ActiveSynch spends ages with the "Looking for changes" message before displaying the "Synchronisation error" message. Sometimes "Synchronisation cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft AvtiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer." is displayed in a dialog box. The troubleshooter can't find any problem when I use that. I'm trying to sync Contacts, Calendar, Tasks, Notes and Files. Even though synchronisation fails, I can still browse my PDA in Explorer, so it's connected, it's just the synchronisation bit that's failing. PC is mains powered and uses the same cable in both cases. At home the laptop is plugged into a docking station and screen, but the cable is plugged into the same USB port on the laptop (not docking station). The other big difference is that at home, my laptop is always connected to a router and the internet via the ethernet port on the docking station.
Any suggestions.
Cheers,
Abaddon100.
abaddon100 said:
Bit of a wierd one this...
I'm trying to sync my M700 with Outlook (from Office Pro 2003) using ActiveSync 4.5 on my Dell M70 laptop. Works fine at home, but fails at work with a synchronisation error. ActiveSynch spends ages with the "Looking for changes" message before displaying the "Synchronisation error" message. Sometimes "Synchronisation cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft AvtiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer." is displayed in a dialog box. The troubleshooter can't find any problem when I use that. I'm trying to sync Contacts, Calendar, Tasks, Notes and Files. Even though synchronisation fails, I can still browse my PDA in Explorer, so it's connected, it's just the synchronisation bit that's failing. PC is mains powered and uses the same cable in both cases. At home the laptop is plugged into a docking station and screen, but the cable is plugged into the same USB port on the laptop (not docking station). The other big difference is that at home, my laptop is always connected to a router and the internet via the ethernet port on the docking station.
Any suggestions.
Cheers,
Abaddon100.
Click to expand...
Click to collapse
What kind of (software) firewall do you use? I had same problem with Kerio. I had to change my firewall software.
TB
My firewall is from the F-Secure Internet Security package and is always running regardless of where I am so I never thought to try that. However I unloaded it (easy to do, just right click it's icon in the system tray and choose "Unload and allow all network traffic", but not "Unload and continue with current security level" because then ActiveSync won't even connect, let alone allow syncronisation) and suddenly everything synchronises. So firewall + internet or no firewall + no internet and everything works, but firewall + no internet and ActiveSync is broken. Application control is set up to always allow the two ActiveSync apps (WCESMgr.exe & rapimgr.exe) so I'm not sure what's happening here.
Anyone got any more ideas about what's going on? It's quite easy to unload the firewall when I want to sync my laptop to my PDA, but it's also quite easy to forget to restart it before I reconnect to the internet and eventually I'm going to get hit by something nasty. And I don't want to swap internet security packages since I've just paid for a years worth of subscription updates.
Cheers,
Abaddon100.
Hi! I need help!
When i connect phone to PC, there are in devices appears new LAN-Card WinMobile and in network settings appears new LAN-connection. But Active Sync doesn't work. It's freezes.
When i switch off extended ability of ActiveSync in Xperia, then ActiveSync works BUT only about 30 seconds, and then it's make disconnect, BUT in computer devices Pocket USB still remains, and some operations i can do (manage files, for example), and ActiveSync shows Disconnected status.
In the same time ActiveSync in phone shows Connected status!!
So many activesync "addicted" progs doesn't work...
In disk mode connection is good.
I just downloaded Active Sync 4.5;
My Nikki100 just can't connect to the PC. I already tried most of the troubleshooting purposed by windows with no sucess.
What is your sugestion?
P.S. Sync symbol (green) is active for a few moments but then goes off. It has USB connection all set in both sides, no firewall, etc.