Have got ActiveSync V3.7.1 but have problems connecting the XDA2 after it has been initially bonded via USB. After I bond it for the first time, whether or not it will connect is completely random, some days it will but more often than not it won't connect.
When I place the XDA2 in the cradle, XDA2 turns on and the signal bar changes as if you were connecting to internet. On the desktop the activesync icon turns green and tries to connect. However, after a second the screen on the XDA2 appears to 'refresh' and the signal bar returns back to normal and I cannot sync. The poor desktop meanwhile still attempts to connect to no avail.
Soft resets don't work, re-installing ActiveSync doesn't fix the problem either. Removed all partnerships and can connect and sync first time round when you bond the devices, but after that, I get problems. Can anybody help?
Anybody?
Related
I have a new problem with ActiveSync.
When i connect my cradle to the laptop (via usb) activesync connects to the device, i hear the nice connected sound from my speakers and the green activesync wheel starts turning while it displays a "looking for changes" message...
My device shows that its connected via activesync and the tray icon is visible.
After a few seconds, i hear the disconnect sound, Activesync disconnects and the tray icon on my ppc disappears. However the wheel in Activesync remains turning for a while and then it also stops, becomes grey and it says "not connected".
This happens whether i connect via usb or bluetooth. in both cases it connects adn then disconnects. i have removed the partnership, uninstalled activesync on my PC and reinstalled it and recreated the partnership but still nothing doing.
I hate ActiveSync...
help Sad
I have the same proble. I have no firewall, tried reinstalling activesync, outlook, cleaned the registry, checked the network setting, changed the usb cable. Still nothing...Can someone help me out with this.
lads ,
has happened to me to,has an auto update caused this
rob
check you PC Sychronization Options
Programs>ActiveSync>Tools>Options>tab PC>Options
Does is say
When Syncing Remotely
(O)Maintain Connection
( )Disconnect when done
Try checking or selecting Maintain connection.
check you PC Sychronization Options
Programs>ActiveSync>Tools>Options>tab PC>Options
Does is say
When Syncing Remotely
(O)Maintain Connection
( )Disconnect when done
Try checking or selecting Maintain connection.
For the last two days, when I connect my K-JAM to a computer, ActiveSync connects. After a few minutes, GPRS connects, but not really.
ActiveSync looks like it is syncing, but it is not sending any records. Email accounts are not updating because it isn't really connected to AS or to GPRS, so neither works. I can also use PocketController (which uses ActiveSync) and I can explorer the K-JAM during this time.
This happened when I first got it and I don't remember how I fixed it.
Any thoughts?
Once connected to the Pc you wont be able to access the net via GPRS on your wizard. Regarding the problem of active sync not actually doing anything, have you ever performed a successful sychronisation, if not it could be that your firewall is interfering.
Do post a follow up and shall see what further can be suggested.
rgs
Jim
Yes, I have been syncing for a month with the K-JAM.
Unfortunately, that is the problem. I am not trying to connect to GPRS, I would rather use AS when connected tot he PC. It looks like it is connected to both, but in reality it is connected to neither. I have to disconnect, turn off the GPRS (which starts working when not connected to the PC) and then reconnect. I can then sync and within a few minutes the GPRS comes back. And it stays in the "in between" mode where neither connection works.
I don't recall installing anything new...doesn't mean I didn't though...perhaps something that is set to connect but isn't smart enough to use the ActiveSync connection?
It does that on my work PC and my home PC, so I am assuming it is something on the K-JAM and not something in the PCs. Both are running AS 4.1.
I know I had this before and did somethign to resolve it...but for the life of me I can't remember what I did.
I have a problem with ActiveSync (or with my Qtek 9000, who knows): when I connect the PDA to the PC through USB, the PC detects the PDA, ActiveSync goes into "Connecting" mode, and then.. nothing. It says that it can not connect.
I followed several troubleshooters on the Internet, but the symptoms still remain.
Perhaps it's a software problem on the PDA. I'd love to perform a hard reset, but I must synchronize first (it's been 2 months since I can't synchronize, and I have done quite a bit of appointment and document entry on the PDA).
So.. what should I do?
I can connect the PDA to the Internet through WiFi and GSM 3G. Should I run a backup program, transfer everything to a FTP site, and then hard reset?
If so, which backup program should I use?
Is there anything I can fix on my PC to make it connect to the PDA?
What is your advice?
THANK YOU!
I have exactly the same problem when connecting via a USB cable to my home PC. Connecting to my home pc via bluetooth works fine and connecting to my work pc with a cradle works fine.
I've tried using different USB cables, different USB ports and have two Qtek 9000's with exactly the same problem on the same PC. I've tried re-installing AS 4.1 and 4.2 and both fail to sync with the cable.
Any ideas or advice would be greatly appreciated.
My Qtek 9000 used to connect and sync on this computer. In the last 2 or so months, this hasn't worked. No idea why!
Are any of you using the app "USBSwitch"??
For some reason, ActiveSync is using settings for a serial connection to connect to your PDA. USBSwitch will allow you to set the connection as RNDIS, which will allow you to connect and sync.
You can download it here -- http://forum.parallels.com/thread2743.html
I had the same problem with my Cingular 8125, and then found out that HTC included the USBSwitch app into the latest ROM upgrade. Has been working fine ever since I found it to switch over.
I had similar problems with my Qtek 9100
My problem was my firewall (Sygate personal firewall (SPF)) which did not allow me to connect via USB.
If I turned SPF of it worked.
My current firewall, NVIDIA Firewall, asked me if I wanted to allow the USB connection to my device. When allowed everything works fine.
/joel
Apologies if this is in the wrong area. I have spent alot of time researching this issue and im yet to find a resolution. I am working in area with a strict SOE on the dekstop PC. I have an O2 XDA Atom. with activesync 4.5 I am using GPRS to connect to the internet on my o2 this is working fine. however the problem occurs when i dock the O2 into its cradle. the GPRS connection will cut and i wont be able to reconnect it. I have changed the properties of activesync and my O2 between 'my work' and 'the internet' to no joy. I realise i can do this by turning off accept usb connections in activesync but then i cannot control my O2 with the software installed on my machine..
what i want to be able to do is run MSN on my O2 continually all day and be able to view the screen from my desktop along with it syncing my calendar etc. if there is any articles which can help me that would be good ive been trying to resolve this for some time now to no avail.
Thankyou in advance
Same problem here..As I am using the my mobiler apps to control the phone via computer..The gprs is disconnected if i plug the cable data...help pls
Hi! I need help!
When i connect phone to PC, there are in devices appears new LAN-Card WinMobile and in network settings appears new LAN-connection. But Active Sync doesn't work. It's freezes.
When i switch off extended ability of ActiveSync in Xperia, then ActiveSync works BUT only about 30 seconds, and then it's make disconnect, BUT in computer devices Pocket USB still remains, and some operations i can do (manage files, for example), and ActiveSync shows Disconnected status.
In the same time ActiveSync in phone shows Connected status!!
So many activesync "addicted" progs doesn't work...
In disk mode connection is good.