I just downloaded Active Sync 4.5;
My Nikki100 just can't connect to the PC. I already tried most of the troubleshooting purposed by windows with no sucess.
What is your sugestion?
P.S. Sync symbol (green) is active for a few moments but then goes off. It has USB connection all set in both sides, no firewall, etc.
Related
I have a new problem with ActiveSync.
When i connect my cradle to the laptop (via usb) activesync connects to the device, i hear the nice connected sound from my speakers and the green activesync wheel starts turning while it displays a "looking for changes" message...
My device shows that its connected via activesync and the tray icon is visible.
After a few seconds, i hear the disconnect sound, Activesync disconnects and the tray icon on my ppc disappears. However the wheel in Activesync remains turning for a while and then it also stops, becomes grey and it says "not connected".
This happens whether i connect via usb or bluetooth. in both cases it connects adn then disconnects. i have removed the partnership, uninstalled activesync on my PC and reinstalled it and recreated the partnership but still nothing doing.
I hate ActiveSync...
help Sad
I have the same proble. I have no firewall, tried reinstalling activesync, outlook, cleaned the registry, checked the network setting, changed the usb cable. Still nothing...Can someone help me out with this.
lads ,
has happened to me to,has an auto update caused this
rob
check you PC Sychronization Options
Programs>ActiveSync>Tools>Options>tab PC>Options
Does is say
When Syncing Remotely
(O)Maintain Connection
( )Disconnect when done
Try checking or selecting Maintain connection.
check you PC Sychronization Options
Programs>ActiveSync>Tools>Options>tab PC>Options
Does is say
When Syncing Remotely
(O)Maintain Connection
( )Disconnect when done
Try checking or selecting Maintain connection.
Hello Guys
I am having a problem with Activ Sync I have searched the forum and tried all the advice, unistalled activ sync, made sure that it is not ticked in settings, tried different leads and even a different computer but no joy.
When I connect the phone to the computer the light comes on and it charges but the phone does not connect to Activ Sync. If I change the tick in the settings the computer tries to connect.
Any help would be appreciated as can not load any programmes or sync to outlook.
Slainte
Spliff
Hi,
I can't sync with my computer (using USB cradle) anymore. When I put my smartphone into the cradle, my computer detects it (USB connecting sound) and the MDA opens a window "Connect to" (Status: Connecting to host) which disappears. Then nothing happens. ActiveSync on computer (v4.5) says No connection.
Can anybody help?
Thanks
SOLUTION:
- Activate "USB To PC" in Settings, Connections
(- install Active Sync 4.5 on PC; check firewall settings)
Still nothing
Tried all that. Still doesn't work.
Using Virtual PC with XP on a Powerbook. Will sync fine with Missing Sync on the Mac, but WinDoze won't go. Keep getting an error 10: "device cannot start".
What does this mean"
Paul d
alegra said:
SOLUTION:
- Activate "USB To PC" in Settings, Connections
(- install Active Sync 4.5 on PC; check firewall settings)
Click to expand...
Click to collapse
Thank you, I've been trying for ages to get this working, I was convinced it was my firewall, but seems I had my phone set up wrong all along
Hi! I need help!
When i connect phone to PC, there are in devices appears new LAN-Card WinMobile and in network settings appears new LAN-connection. But Active Sync doesn't work. It's freezes.
When i switch off extended ability of ActiveSync in Xperia, then ActiveSync works BUT only about 30 seconds, and then it's make disconnect, BUT in computer devices Pocket USB still remains, and some operations i can do (manage files, for example), and ActiveSync shows Disconnected status.
In the same time ActiveSync in phone shows Connected status!!
So many activesync "addicted" progs doesn't work...
In disk mode connection is good.
I'm trying to use the factory installed Internet Sharing (not the new HTC Wifi Router, not WMWifirouter, just the regular factory installed Internet Sharing) to get internet access on my PC via USB (not Bluetooth).
I've spent hours and hours reading and trying different things but it still does not work. Can someone please explain the settings they used to get this to work?
Settings for Active Sync?
Settings for Network Connections on PC?
Settings on phone?
I have tried all possible combinations of settings and am absolutely STUMPED. I'd appreciate ANY help.
FYI: My PC's running XP
EDIT:
So, I got the Internet Sharing to work and just wanted to share what I learned in case it helps someone else. I'm using the HD with stock WM 6.1 and a PC running XP with Active Sync 4.5.
My problem was that even after applying all the correct settings, Internet Sharing was never able to establish a connection (it kept saying "check USB connection"). I noticed in my PC under My Computer>Properties>Hardware>Device Manager that there was an exclamation point beside the phone network adapter, so I updated/uninstalled/reinstalled the driver with no success. This driver is normally automatically installed when you first install Active Sync and create a partnership with your phone, so then I decided to uninstall and reinstall Active Sync and then created a new partnership with my phone (I didn't have to worry about losing any of my synced contacts, notes, calender, texts, etc because I also sync with Microsoft MyPhone, which I highly recommend). Afterwards, I disconnected my phone from the PC and closed Active Sync. Then I used the following settings/steps and Internet Sharing worked flawlessly.
Here are the settings I used:
-in Active Sync: unchecked "allow usb connection", unchecked "allow connections to one of the following", "this computer is connected to" set to automatic, checked "open active sync when my device connects", checked "allow wireless connection on device when connected to the desktop"
-in PC: disable Windows Firewall and all other 3rd party firewalls
-in PC internet explorer: set LAN settings to "automatically detect settings" (in Firefox under Tools>Options>Advanced>Network>Settings set to "auto detect")
-in phone: under Start>Settings>Connections>USB to PC checked "Active Sync", unchecked "enable faster data synchronization", checked "ask me first about UBS connection type when I connect the device to the PC"
With these settings:
-connect your phone to PC (on phone, dialog box should appear showing Active Sync checked, USB unchecked, Internet Sharing unchecked)
-nothing should happen at this point
-then in phone, launch Internet Sharing, set PC Connection to "USB", set Network Connection to whatever data network your phone uses, then press "connect" (the status will change from "disconnected" to "check USB connection"); wait about 15-20 seconds while your PC reacts (it takes this long only the first time you connect because the PC is installing the appropriate drivers)
-the Internet Sharing status should change to "connected" and now you can use the internet on your PC through the data connection on your phone. So simple if everything works properly.
FYI:
-if you go back to PC under My Computer>Properties>Hardware>Device Manager you will see your phone network adapter (no longer with an exclamation point) called "Windows Mobile-based Internet Sharing Device"
-f you go to PC Network Connections you will see your new phone LAN connection
-if your phone falls asleep while connected, the internet connection does NOT get interrupted; I also received a text while it was connected with no problem
To Disconnect Internet Sharing:
-close all browsers, press disconnect on your phone, then unplug your phone from the PC
-you can now turn active sync back on by checking "allow usb connection" and turn your PC firewalls back on
Wow, sorry so long, hope it helps someone.
goldsfool said:
I'm trying to use the factory installed Internet Sharing (not the new HTC Wifi Router, not WMWifirouter, just the regular factory installed Internet Sharing) to get internet access on my PC via USB (not Bluetooth).
I've spent hours and hours reading and trying different things but it still does not work. Can someone please explain the settings they used to get this to work?
Settings for Active Sync?
Settings for Network Connections on PC?
Settings on phone?
I have tried all possible combinations of settings and am absolutely STUMPED. I'd appreciate ANY help.
FYI: My PC's running XP
Click to expand...
Click to collapse
If your trying to do this at work, there is most likely a firewall setup so this wouldn't be possible unless your knew access codes etc for firewall
If this is with your home pc, when connecting pc to HD using usb you should automatically be presented with a synchronization screen from activesync for setting up a connection. Ensure you select 'allow wireless data connections on your device while it is connected to your computer' before finishing
And also :-
On the Touch HD
Start - Settings - Connections - USB to PC
Check Activesync and uncheck "enable faster data synchronisation"
Spent a couple of hours trying to connect before I did this.
Hope this works for you.
r
Andrew
Thanks guys for your responses.
I've already tried each one of those things. I'm at home with firewall disabled, have the correct boxes checked in Active Sync, have the correct connection settings on the phone, etc. I've tried all possible combinations.
When I go to My Computer/Properties/Hardware/Device Manager I even see the phone Network Adapter but it has an exclamation point beside it. So I try to update/uninstall/reinstall the driver and it still doesn't work. Do I need to manually install different USD Modem drivers?? This doesn't seem right because these drivers should automatically be installed when I installed Active Sync.
I'm gonna try to update everything e.g. xp service pack and uninstall/reinstall Active Sync, etc. Hopefully after all of that it will work.