[Q] hw6915 and route66 - Sable

i try to install route66 on my hw6915 but after install there is an error msg comes everytime i try to do it it says :
the file 'route 66 maps' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
and i notice that all files go to the phone memory not the memory card .. i want to know how i make all files go to memory card during install .. plz help me !!

hi, sorry for not havin' your answer!
hi, sorry for not havin' your answer!
but i have a question for ya!!
i too have a hw6915, and I'm really really new at this!
i was wonderin' if you can help me know how to upgrade my windows mobile 5 to wm6 or 7...
my knowledge about pocket PCs = 4/10
i have xp, or win 7, usb connector, INTERNET connection, n every thing...
and how to get gps position from pocket to laptop....!!
thnx, and again sorry for not be able to help your problem!!

Related

Wallaby ROM and repllog.exe

Hello guys, i need some info, yesterday i prepared and download a ROM , i installed it but when i start the wallaby it doesn't show me the desktop, it shows me only a gray screen, the programs link doesn't work and qhen i try to connect it to the pc it shosme (on Wallaby) this message Cannot run repllog.exe, and the pc don't recognice it, how can i fix it up?
Thanks a lot !!!
Hey guys, i find the answer and of course i repair the problem, the only option i found it was to re install the rom, so i made it by flash on SD card, and (Thank's God) it works !!!!
Than's anyway ... see ya !!!

needed real help for upgrading 6.5

when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !
i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?
where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.
it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???
can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.
hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.
Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.
It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)
KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.
HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.
sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me
aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!
Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers
Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.

[Q] windows ce 5.0 explorer.exe

Hi I have a gps running windows ce.net5.0, now I want to get to the desktop, have access from my pc to the device registry and to the device memory, noticed that the device does not have explorer.exe that should be located in the windows directory, if some1 has a windows ce 5.0 device can you please upload the explorer.exe found at windows/explorer.exe. Would be very much appreciated, if my hack works I will create a tutorial on how to have navig8 b90/b95 gps units, want to just install racechrono to my gps, and access the desktop, thanks in advance
I have explorer.exe but still no access to CE
RAC 5000 dat nav!
It won't let me copy it!
All exe,dll asnd cpl files seem to be protected from copying???
You might use CeDesktop, an explorer replacement that definitly runs under CE5
DL: http://rs52.rapidshare.com/files/37224775/ceDesktop.exe
Can you upload somewhere else please, can't download it with my blackberry
http://www.mediafire.com/?f6b2cjwm60q0758
jwoegerbauer said:
http://www.mediafire.com/?f6b2cjwm60q0758
Click to expand...
Click to collapse
Can you please upload CeDesktop? If u still have it...I want to use an igo software on Medion Gopal E4135, so i will try with CeDesktop...
P.S. did u now some easy tutorial gor this GPS...
Thanks in advance!
sorry for my English

HTC HD MINI VS activesync

hi i have a problem while i link device with pc on virtual machine with Windows xp.
i know someone will ask ''why u use virtual machine?'' well on s.o. principal i have Windows 7 ultimate N and i can't install drivers of the device,so i must use vm or format,and for now i don't want format.
anyway untill today at 2p.m. was all right after i don't know what happen but started problems with that error:
''impossible start some essential comunication services.Set up the device,then try to do a connection''
i'm from italy so sorry for my English and the translate of the error.
anyway i tryed do erase the connection with the device,to uninstall and reinstall activesyn(with the reboot in the middle of operations) but nothing.i also tryed to create a new account,but same error.
with another virtual machine,with Windows 8 work good,so i suppose no need a hard reset,i hope.
i hope in some help thanks:crying:

[Q] Need help with Gps, Transonic PNA 3002

First, sorry if that is not the place for posting my problem. I just buy a gps named Transonic(Medion) PNA 3002. The problem is when i turn it on say " Installation files not found in SD/MMc Card" . I really don`t know what is supposed to copy on the sd card and where to find these files. Please help me and sorry for my bag english. If helps on the back say : Windows CE Net 4.2 Core .

Categories

Resources