First, sorry if that is not the place for posting my problem. I just buy a gps named Transonic(Medion) PNA 3002. The problem is when i turn it on say " Installation files not found in SD/MMc Card" . I really don`t know what is supposed to copy on the sd card and where to find these files. Please help me and sorry for my bag english. If helps on the back say : Windows CE Net 4.2 Core .
Related
Hello! I’m apply to anybody help me. I have O2 xda for Asiy(no blocked the cellular operator). In time the charge upgrade ROM it stays and cull off USB connection. Display O2 demonstrated beginning of window charge ROM’s.
In our site w.xda-developers.com I see instruction for the charge image ROM. I have bootloader WALLABY V5.17. Of late in xda-developers.com I tru make use of your instruction of recovery (return) ROM in my O2, but I have a questions:
1) Can I shall a means (possibility) of revive (recovery) my O2??,without SD upgrade ROM?
2) I can’t make the key SD card 128Mb for WALLABY V5.17, I’m use up your prompt, what I do wrong? May be a program have a trick (devises)?
3) when I make a note a key for SD card in time working, program XDArit destroy (disappear) hard-disk of my desktop PS. What I doing wrong?
4) Where I can taked image ROM for my O2.
[email protected]
Sorry for my bad knowledge English.
Thank you beforehand, I hope for your help FredyQR.
Hello.
We Ask the pardon for my terribly bad english!
Try to express its problem correct.
When change ROM 3.14.17, was rubbed relationship with computer USB join. With begin display O-2 shown begin bar of the loading 0%, now display shows the incomprehensible graph. My O-2 destroy.
O-2 does not unite on USB with my PC. Hard reset does not correct the system.
On your put xda-developers.com I read what restore SD-card.
Beside me is not got! that I divide not so?
1. I can not create the key-SD for WALLABY 5.17, can exist what that tricks?, how much I have an attempts for 128 Mb SD-cards with key?, or for different SD-cards with key?, my attempts to open V5.17 could ends?
2. The Program XDArit.еxе kills the system files on my PC that I do not so?
3. Esle I shall be able to create SD-Key for V5.17., image ROM to write on SD with key or on other SD.
4. Please help me to find the image a ROM for SD, or give the reference where possible find.
We Ask the pardon for my terribly bad english!
:lol:MANY THANKS that have been able to honour this!
S :lol:hall be grateful all for help!
RESPECTFULLY YOURS Fredi.
I'm having a problem with my Dopod aka magician . I have installed tomtom navigator 3 , when i try to run it says : cannot found countrymap .
I think the problem is, that "storage card" is written in chinese . Maybe thats why that tomtom can not see the storage card.
Correct me if i'am wrong. otherwise please help me to find a solution. Thanx
(i'do not want to flash my rom )
Firstly hello i,m new here and have just purchased a, htc tytn and i love it but i,m sort of new to ppc .
Anyway i,ve just got this , v6 plus Maps - 108.92M & Maps v6.6 - 182.29M basically its TTN V6 GB Install will this work on the tytn ?.
Now i have searched the forum for a while for installation guides for putting this onto my ppc but all i have come up with is mostly gps reciever stuff .
I,m not quite sure about this but i have a 2gb card do i put this in my storage card and just set it up from there ,and what would i do with the maps folder i have or should i ask were it all goes ?.
Appreciate any help and thanks in advance mik.
Do you have all that on CD or have you downloaded files?
Mike
Thanks for the reply mike ,they were on a disk my brother gave them to me and i,ve tranfered them to my pc .
And as i,ve stated i was going to use them on my hermes phone but unsure of the installation ?.
mufc said:
Thanks for the reply mike ,they were on a disk my brother gave them to me and i,ve tranfered them to my pc .
And as i,ve stated i was going to use them on my hermes phone but unsure of the installation ?.
Click to expand...
Click to collapse
Mmmmm. We could end up in some bother if we guide you through setting up copied versions of commercial software!
So just in general terms CDs normally have a file called "setup" or "install" (or other similar .EXE file) that you run on the PC. If the application is one that will end up on a PPC device then you would have that connected via usb to your computer. Typically running the install file will then open options to setup the program on your device.
In some cases on the CD you might find a .CAB file. This you would use Active Syncs "Explorer" button to navigate to your PPCs storage card and move the CAB file across. Then on your PPC you would navigate to the CAB file and tap on it to install.
Regarding where to put Map files. My tomtom folder is on my storage card root directory. That is therefore where I put the map file. (NOT in the tomtom folder but on the root directory of the storage card. Map files for tomtom typically have names like GB_Plus_major_Roads_...... Do not rename it or else tomtom won't find it.
Mike
Hiya mike i gave it up as i thought the files could be corrupt or maybe dwnloaded from somewhere and did,nt want to ruin my phone with corrupt files .
I,m sure i,ll be seeking your or other members help in the future as i,m kinda new to ppc file transfers and what you can do with this grt phone .
Once again thanx for your input
hi everyone...I have a Fujitsu Siemens Pocket LOOX N100 that runs on wm5.I wonder if somebody knows a way to get it into service mode because I want to replace the GPS software that comes with the unit, not only because the maps are way out of date, but because the don't have a map for my country. I would like to install iGo because I have it on another GPS and I love it...
Thanks in advance...
Loox N100 does not run WM 5.1 but WinCE 5.0
To access the device you need to enable ActiveSync und the device.
I join two CAB files in order to enable or disable ActiveSync.
Just rename the file you need to MN6-update.cab and put in root of miniSD card (save original one first) and reset device.
After that you can access the device via ActiveSync and install whichever software you like.
If you want to enable ActiveSync and start on a clean desktop you should use the CAB file attached.
In there you have
REGEDIT4
[HKEY_LOCAL_MACHINE\init]
"Launch50"="explorer.exe"
Click to expand...
Click to collapse
Sascha
first of all I want to thank you Sabo, I'm really looking forward to get back from my trip and test those cabs...
but first let me see if I got it wright:
1.the loox_n100_enable...zip are the files to enable/disable the activesync, but would I have access to the WM menus??I ask this because the N100 starts in a kiosk mode
2.the MN6_update.cab - is going to start the N100 in explorer mode not kiosk??
I have a Loox n110 running TT6 and I got all my hacking info from here . It's a very long thread going back 3 years but it has everything you need to know. I installed the iLooks desktop starting off with the Active Sync cab trick as mentioned to access WinCe.
Hope you find it useful.
hi..thank you very much guys for all the help...until now I wanted to sell the n100 but now I'm again very happyyyy, I can barelly wait to start experimenting...
Forgot to mention that with a Mini SD to Micro SD adapter I can run a 16gb memory card on it so you can really load it up - no wifi though.
d3nika said:
let me see if I got it wright:
1.the loox_n100_enable...zip are the files to enable/disable the activesync, but would I have access to the WM menus??I ask this because the N100 starts in a kiosk mode
2.the MN6_update.cab - is going to start the N100 in explorer mode not kiosk??
Click to expand...
Click to collapse
1. No, just access via ActiveSync
2. Yes
d3nika said:
hi..thank you very much guys for all the help...until now I wanted to sell the n100 but now I'm again very happyyyy, I can barelly wait to start experimenting...
Click to expand...
Click to collapse
Don't sell this fine piece of hardware.
Where els do you find a PND with removable battery which is this small and where you can disable static navigation in order to use it easily for geocaching or other things.
custardo01 said:
Forgot to mention that with a Mini SD to Micro SD adapter I can run a 16gb memory card on it so you can really load it up - no wifi though.
Click to expand...
Click to collapse
I can only see the first 4 GB of a microSDHC card.
Do you have a driver in order to see the rest of the card?
Sascha
SaBo said:
I can only see the first 4 GB of a microSDHC card.
Do you have a driver in order to see the rest of the card?
Sascha
Click to expand...
Click to collapse
My mistake sorry although the system recognises the capacity of the 16gb card when I actually browse the folders not all files are showing. I forgot this as I don't use this card usually in the Loox.
It does recognise all files on my 8gb microSDHC card, however. My built in driver is "SDHC_SC2410.dll". I haven't installed any other drivers myself.
Mine is the Loox n110 with the built in flash drive of 2gb using driver "FLASHDRV.dll". Not that it would affect the reading of the SDHC memory.
Hope that answers your question.
Hello all, I know it is a very very old topic !
But I found in my father's place this old Loox N100 piece of tech and I was trying to do some stuff with it.
I managed to access Windows CE 5 thanks to those CAB file provided about this topic.
But then I can't install or modify anything.
Can someone help me to update the maps of the GPS or install a more recent one please?
I have been searching for hours on internet but I can't find how to do. I don't understand the use of ActiveSync neither. My PC is running on Windows 11.
I tried to copy some exe or cab file to the Mini SD card, but when I want to install them from the device, I have an error "xxx is not a valid windows CE setup file"
Anybody could help me achieve something with this old tech?
Thanks a lot and sorry for the old post.
BTW: Since I used the CAB file above, I always boot on Windows CE first and also the USB connection to the PC doesn't open the SD Card anymore. I tried to use the "disable activesync" CAB file above, but it continues to boot on Windows CE and USB connection still not work.
Anyone with knowledge of this old tech can help me figure out a few things ?
At least how to revert it back to normal haha
Thanks
i try to install route66 on my hw6915 but after install there is an error msg comes everytime i try to do it it says :
the file 'route 66 maps' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
and i notice that all files go to the phone memory not the memory card .. i want to know how i make all files go to memory card during install .. plz help me !!
hi, sorry for not havin' your answer!
hi, sorry for not havin' your answer!
but i have a question for ya!!
i too have a hw6915, and I'm really really new at this!
i was wonderin' if you can help me know how to upgrade my windows mobile 5 to wm6 or 7...
my knowledge about pocket PCs = 4/10
i have xp, or win 7, usb connector, INTERNET connection, n every thing...
and how to get gps position from pocket to laptop....!!
thnx, and again sorry for not be able to help your problem!!