Database Users

XDA II Mini & SD Wifi Card

When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus

crus said:
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
Click to expand...
Click to collapse
Install this...
copy to device through ActiveSync explorer.
Goto device's File Explorer, look for the CAB file that you just copied.
Tap on the file to install.

Sandisk Driver
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com, have tried both the Wifi, and the combo wifi card, the wifi works well. The combo also works okay, although does have some lock ups, but IT DOES WORK!!!
I have been tyring to export ROM without doing any harm to device as only have it on load for a few more days, as want to bring the SDIO driver accross to my XDA2.
Have noticed the BT is having problems also, and would envisage an update is coming for this to bring up to new version that is on XDA IIs.

henrylim:
Install this...
Click to expand...
Click to collapse
Thanks.
I shall try it when I get off work tonight.
Thanks again.
But one more question, does anyone know if the WLAN adapter should come with the XDA Mini?

You have to install the driver first .
After that no problemos
it work fine ( WifiFofum work very good !!!)

Re: Sandisk Driver
lampard said:
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com
Click to expand...
Click to collapse
Hi,
the latest driver from sandisk that you have mentioned, is it this?
http://www.sandisk.com/download/Drivers/wifi/256mb-setup03.exe
or something better?
I'd tried this before in WM2003SE 2.06. No dice. If it works in Magician, I'm inclined to hope that the SDBus drivers has been updated, and (cross my fingers) that SDIO H/W slot is the same.
hmm....something more to be cheerful about during Christmas...

Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.

Different version of SDIO drivers
lampard said:
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Click to expand...
Click to collapse
I wonder why I didn't look at this before.
The Mini and JAM has the same version of SD drivers:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"SDMemory"="0.25.00"
"Common"="0.25.60"
"SDBusDriver"="BSQ 1.2 + 0.25.00"
Whereas the 2.02/2.06 has these version:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"Common"="0.15.10 HIMA"
"SDBusDriver"="0.15.00 HIMA"
Anyone can confirm the 2.20tl version?
The drivers are in the ROM though, and it's not a simple search and replace operation.
I wonder, would it be worth to upgrade the Himalaya with Magician ROM???
I'd quite a few pple now that says that the 256MB SD drivers for PPC 2003 works with the Mini now. I've tweaked the registries for the Himalaya, but only get as far to allow the wlan tools to recognise the card..still no joy.

Guess what...sd wifi of (256 combo) working....
I've managed to get the Wifi portion of the Sandisk Wifi 256 working
on my 206 ROMed XDA2 device.
The steps are abit complicated, so try at you own risks!
The steps are:
(a) download the sandisk 256 drivers from www.sandisk.com (256mb-setup03.exe)
(b) remove your XDA2 device from the cradle, and execute the file.
(c) Goto to the Microsoft ActiveSync folder, and look for this folder "SanDisk Corp\Wi-Fi_WINCE400"
(d) Within this folder, there is a Pegas.2577.CAB
(e) Using WinCAB Manager, open this CAB file
(f) Within the Pegas.2577.CAB file, there is another "SDBusDriver12.CAB" at file index 5.
(g) Now, download the Magician ROM (the SD card version) from the forum's ftpsite.
(h) Using dumprom, dump the contents of the Magician ROM and locate 2 files "SDBusDriver.dll" and "SDMemory.dll"
(i) Replace these 2 new files with the ones in the "SDBusDriver12.CAB"
(j) Re-save the "SDBusDriver12.CAB" and replace the file in "Pegas.2577.CAB"
(k) save "Pegas.2577.CAB" and connect the XDA2 device back to the cradle.
(l) install the Sandisk drivers following the prompts.
(m) Soft reset the XDA2 device when done.
Insert the 256MB+Wifi SD card, and activate the Wifi !!!
You might find that I've gone the long way as I have yet to figure out the full implications of the setup. It doesn't replace the original DLL files in /Windows as the 2 files are installed as CUSTOM SD drivers.
Perhaps we can pool our brains together and crack the SDMemory portion.
I am surfing on my XDA2 device using the Wifi as I am writing this, so I believe we are close to the verge of cracking this.

hello,
I recieved my s100 with the sd wifi/storage card and trying to setup a wifi connection.
I installed the sd drivers and i scanned for an wifi accespoint i noticed that my neigboars are having a wifi acces point.
but i get this message:
unable to obtain a server assigned IP adress.
what i'm a doing wrong?

I can't get wifi to work!
hello,
I just can't get the thing working
I tryed the following:
I installed the driver from scandisk that was on my cd ( the same as mentioned here) everything goes well but i looks like he doens't install the pegas stuff.
I do get a wifi connection link ( settings ->connections -> sandisk wifi
I alsow tryed the tutorial of henrylim but i get stuck at point c becaus there are no files in my activesync folder.
I did try to find wifi networks and i did find a netwerk from my neighboars, i saw there connection if it was securred and mac address an everything.
I didn't get a IP address
@ the AP Browser part i saw it and the connection was 33% there.
But when i go to the status it doens't show anything but that the device is Associating and then the network name.
if i than try to use the internet it wants to use gprs and not the wifi card.
can anybody plz help me I would really like to use the wifi on my magican.

Do you have a DLINK AP ?
If so, ithey do not get along very well

brilca said:
Do you have a DLINK AP ?
If so, ithey do not get along very well
Click to expand...
Click to collapse
i don't really know what you mean.
i was talking about the standard sandisk software and there is a tab called "AP Browser"

what is the brand of the access point wi-fi that you have ?

brilca said:
what is the brand of the access point wi-fi that you have ?
Click to expand...
Click to collapse
bussy deciding whitch one to buy, I'm now trying to access the neigboars netwerk.

Unless your neighbour has specifically allowed you access to his network you will probably not be allowed to connect.
And as long as you're trying with your neighbours access point, brilcas question about the make of the access point would apply to the one they have.

OK I had a wifi connection.
my brother turned his laptop into an AP and i had a connection with it.
So I know the wifi on the imate works but there's still one problem.
When i was connected with wifi and i tryed IE explorer it wanted to connected by using wifi.
How can i change that into wifi?

eltinio,
I am still trying to get WiFi to work on the WM2003SE UK XDAII version...
In response to your question, you need to tap Start > Settings > Connections and then tap Connections (make sure your WiFi card is in and enabled).
Tap the Advanced Tab and then tap the Select Networks button, from the first drop down list select My Work Network and then tap Edit.. > Proxy Settings tab and then tap the 'This Network connects to the Internet' checkbox and then tap OK to save and OK again to exit the connection manager.
You will no be able to browse the internet...

henrylim,
Could you post a link to the WiFi drivers you cooked or provide the file in this thread please so we can all test it out as most people may not able to perform the tasks you have listed to enable the WiFi drivers.
Thanks in advance,
Godz

XDA Mini and SD Wi-Fi
Do you guys know if the SD Wi-Fi card Sandisk or Sockets supports WPA encryption when added to the Mini and also if the problems with Dlink 54G/B wireless access points have been fixed yet?

Activpync wont install on my computer...

Any reasons why not? Im on Windows XP yet it comes up a warning saying that it will only work on computers with XP!
This is very frustrating...
Is there any other way to link my phone up to my computer? I would really like to transfer some music onto it

Have you got SP2 installed?

I cant, I dont have a genuine Windows.
Do you NEED SP2? Surely there is a way around this...
I can download activesync 3.8 but I think I need the drivers for the phone?
Any help... PLEASE!?!

I've had the same problem with my XP version
impossible also to install an update from windows site
I had to install an update on my windows 2000, that worked
and then activesync 4.1 finally worked 100%
other way to work around that was to download things on XP
put them on my old SPV E200 with activesync 3.7 wich works
and then send the things on my SPV M3000 by bluetooth...

Johnloner said:
I've had the same problem with my XP version
impossible also to install an update from windows site
I had to install an update on my windows 2000, that worked
and then activesync 4.1 finally worked 100%
other way to work around that was to download things on XP
put them on my old SPV E200 with activesync 3.7 wich works
and then send the things on my SPV M3000 by bluetooth...
Click to expand...
Click to collapse
Or get a Legit copy of Windows XP!!!
You run a pirate operating system then compalin when software doesn't work with it properly.
Come back when you have a license. Is your Wizard stolen as well?

hmmm dude...
the post isnt if its right or wrong to steal windows! Its to do with how we can cheat them more!
I think the only way round this is to download a crack to get xp2.
If I could find the drivers for the phone would it work on activesync 3.8?
PS. No my phone is not stolen, Im sure you have a copied CD in your collection somewhere too.

There's a vast number of copied XP versions with SP2 pre-installed available out there. Should be all you need.

I can get a legal copy of windows xp from somewhere...
But to install it would I loose all of my documents?

chrisredmayne: it would be in your interest to backup your docs (and whole system) before installing SP2, even if your windows is legit. It's a big install!
You could make your own SP2 install disk, by "slipstreaming" SP2 into a windows install disk. Also, there are cracks for SP2, and there are also cracks for trial versions of windows.
I imagine the ActiveSync install could probably be cracked to skip the SP2 check, but it's not a long term solution.
I don't recommend any of this. When you start using SP2 and Windows in the future, you'll have to have a legitimate copy to download certain updates from Microsoft, so you might as well get hold of a legit windows, one way or the other. OEM copies are stupidly cheap, and you can even buy an OEM Media Center install for a small amount of money.
V

chrisredmayne said:
Any reasons why not? Im on Windows XP yet it comes up a warning saying that it will only work on computers with XP!
This is very frustrating...
Is there any other way to link my phone up to my computer? I would really like to transfer some music onto it
Click to expand...
Click to collapse
there is a piece of software at
http://www.softick.com/pocket-pc/cardexport2 called "card export II"
allows you to make the wizard look like a mass storage device, so activesync is not needed to transfer to the storage card.
ps (takes a few goes to install)

I dont get how to install it, only looked at it for a minute though. I unpacked all of the files, and it asks to open a prc file? and press hotsync on the cradle... (Guess that means phone).... Stumped

if i remember correctly .prc files are for palm user's not pocket pc.
i think you have downloaded the wrong version!

Use cardreader to download into mSD, anything you want:
Music, apps, but you need cab files to install it from mSD card.

aliendad said:
chrisredmayne said:
Any reasons why not? Im on Windows XP yet it comes up a warning saying that it will only work on computers with XP!
This is very frustrating...
Is there any other way to link my phone up to my computer? I would really like to transfer some music onto it
Click to expand...
Click to collapse
there is a piece of software at
http://www.softick.com/pocket-pc/cardexport2 called "card export II"
allows you to make the wizard look like a mass storage device, so activesync is not needed to transfer to the storage card.
ps (takes a few goes to install)
Click to expand...
Click to collapse
aliendad, can you confirm you actually have Softick Card Export II for Pocket PC working on a wizard device? I have tried this on my k-jam and it didnt work at all. Even when i contacted Softick support they have said they are still working on a WM5 / Wizard compatible version.
EDIT: i just went and downloaded v2.10 of CE2PPC (which funnily enough isnt even mentioned on the website). In the setup i downloaded, i found there is a WM5 ARM install cab however this still fails to install on my Wizard / K-JAM as with all the previous versions.
Thanks
Chris

You need a minimum of SP1. You do not need SP2. For ActiveSync 4.1. If you cannot pass the genuine validation tool you need to enable automatic updates and to install them automatically. You cannot use the Windows Update site. If you set to install Critical Updates automatically it should bring down SP2 (as it is considered a Critical Update)
Also you can just download SP2 (the full install) and you should be able to install it. It should not require validation as you can install it if not connected to the network.
Although the above may not work if you truly have a messed up version of XP. I am assuming you have either a cracked version of a legit copy or an invalid product code.
I have read about people cracking XP Media Center 2005 and all worked well until the Genuine Validation tool. Then somebody came out with a crack for that. :lol:
Good Luck

I just got a disk with XP so I think its a fake validation code that I have.
I downloaded the SP2 from the windows update site, and from a random site somewhere that I searched on google for.
The problem was that when I tried to install it stopped after a few minutes and said that it wasnt a genuine windows. So Im guessing any version that I download will have the same check on it.
But I shall try and turn my updates on later and see if it works, or give that other program a go!

Puckster said:
aliendad, can you confirm you actually have Softick Card Export II for Pocket PC working on a wizard device? I have tried this on my k-jam and it didnt work at all. Even when i contacted Softick support they have said they are still working on a WM5 / Wizard compatible version.
EDIT: i just went and downloaded v2.10 of CE2PPC (which funnily enough isnt even mentioned on the website). In the setup i downloaded, i found there is a WM5 ARM install cab however this still fails to install on my Wizard / K-JAM as with all the previous versions.
Thanks
Chris
Click to expand...
Click to collapse
yes, is does work, had to do a lot of soft reseting but now have a quick access icon at the bottom of the screen to select card export or active sync.
a few days ago did a hard reset, and installed card export as one of the first installs and it installed much more smoothly that the earlier install.
ps great prog makes things much easier, can't install activesync at work.

Softick Card Export II version 2.11! Now working on Wizard!

read more: http://www.softick.com/news.html#83

Re: Softick Card Export II version 2.11! Now working on Wiza
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...

Re: Softick Card Export II version 2.11! Now working on Wiza
bolasz said:
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Click to expand...
Click to collapse
It works for my 838.. I have lockup and unable to switch to SDcard mode only if I connected to my PC and activesync once and unplug. But that seems to be the activesync issue in my 838 which fail to free itself from unplug from PC. So it cannot switch to SDcard mode..and prompt me an error message.
I have already switch to AS4.1 but does not improve my situation.
What is Microsoft doing here?? :roll: A soft reset is the only way to get my device syncup again.. :x

I own this program since I had my XDA mini ...
finally I can use it again to copy some files to my pda and use it as a memory stick...
I also noticed some problems:
1. after I connect the USD cable and the PC recognized my pda as a memory stick, Windows XP asked me to make a reboot in order to be able to use the new 'harddrive'
2. after I copied a .jpg to my pda it looked like the storage card is no longer recognized by WM5. The icons of the shortcuts to programs I installed are missing and I cannot browse with TotalCommander to my storage card.
After disconnecting the USD cable, my storage card could be found again - is this a bug or a feature?!
After the first connect in mode 'Card Export' I switched to 'Active Sync' and the synching went on without any problems.
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
This looks also to me like an incompatibility between card export and active sync.
Hmpf ... rebootet the phone and connected - voila - my Wizard was again properly verified as Memory Stick and I again could upload another .jpg to my device.
It looks definately unfinished ... but it is working quite acceptable to me, though there is a lot room for improvement, it will get the job done, if I need a memory stick 'on the go'.
My device is a HTC Wizard, O2 german.

i may be wrong on the second point, but activesync alters a file when you transfer it to the pda,
so if you transfer a file to the card (even using a card reader) then put the card back in the pda wm5 will not recognise it properly.
point 1 should only happen the first time of detection.

have no problem with my XDA II...

Chris09 said:
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
Click to expand...
Click to collapse
I am experiencing the same... Please update this topic if you'll find a solution.

i'm having the missing dlls dialog problem too.
I noticed that once you activesync'ed, you can't switch to card mode and need to reboot the device.
However, mine can't seem to work anymore. It won't even switch. But I also tried disabling my today's screen (pocket plus and pocket breeze) and it works... but only the icon manage to change. My PC can't detect it as a mass storage device though.
Any luck?

Mine is working fine, I got that dll message once but a soft reset fixed it.

Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.

vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.

eilz said:
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
Click to expand...
Click to collapse
Same here too!! using ver 2.12
ver 2.11 worked fine with me, so most probably I will downgrade to it now.
I emailed the tech support and waiting for their reply. I will post it here in case I get anything new.

I just tried v2.12, and it didn't work. I found v2.11 on some download site, and installed it. v2.11 worked fine on Qtek's 2.8.7.1 ROM.

I cant get this to work either using 2.12. I get the device manager problem as mentioned previously. Does anyone know where can i get 2.11 from?
found it here:
http://www.softick.com/files/CardExportPPC211c-softick-en.zip
but i get the same problem

You can find previous versions in the "download" section on the left.
I'm having the same issues, used to work fine with 2.11, then it stopped being able to write but could still read (this is on my Mac), and now with 2.12 I can't even get the thing to mount. I'm talking with the developer to see if we can get a fix.

Any 2.12 and 2.11 not working for me... My computer and three others shows me message that they don't have drivers

I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35

pewe said:
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
Click to expand...
Click to collapse
I'm a bit confused regarding their reply.
You asked a question about the Wizard and they replied saying they are waiting on delivery of HTC Universal to examine it better. I'm not sure what the Universal has to do with compatibilty for the Wizard as they are completely different devices with different hardware. (Mybe i'm wrong and the hardware components that Card Export uses is actually the same on both devices)

Puckster -
I noticed this on second look, and asked for clarification.

just want to inform everyone that there is a free alternative. it's similar to softick card export that it turns your device into a plug-and-play card reader. it's called wm5torage (yes, the number '5' is the letter 'S')
http://forum.xda-developers.com/viewtopic.php?t=45411&highlight=wm5torage
it does not have the system tray icon that enables you to switch between activesync and export mode, but rather you open the app in your accessories folder and activate/deactivate it from there.
but hey, it's free and it works

info: WM5torage new version (1.60)

Version 1.6
- Full compliance with USB Mass Storage Bootability Specification. Now booting PC from smartphone as USB stick should always properly work, provided your computer's BIOS is modern enough to properly USB-drive-boot. Checked it via booting FreeDOS and PuppyLinux from my 8310 - seem to work ok.
- Improved general compliance with USB Mass Storage protocol. Still not 100% compliant though, due to the built-in hardware driver limitations & bugs.
- Added command line switches to control utility "remotely", via scripting utils or batch files & shortcuts:
-a Activate mass storage mode
-d Deactivate mass storage mode
-q Quit
Switches can be combined, they will be executed in order. For example, "WM5torage -a -q" will launch utility, activate mass storage mode (if not active already), and quit after activation is completed.
more details see: http://www.modaco.com/WM5torage-t238545.html

Thanks zoki for the info. I use wm5torage alot - great program
For those who don't have a modaco login find attached below.

Thank you, meschle!!!
I really appreciate your help.

Awsome Utility! Thx!

When I run the link that came with this program, it will not let me activate and it says "Status: Can't open card."
My card is working just fine. What is the problem?
BTW, I have a Cingular 8125 running the origonal ROM.

isnt there a wm5 storage that is 1.7 thats what mine says. unless im worng. wait....no im right it says 1.7 here it is.

Latest version of the excellent Wm5torage 1.72 device to usb stick convertor - i have modified installer so that its suitable for PPC installation rather than smartphone.
mods are:
1. No setup.dll so no request to restart device (not required anyhow)
2. Installs shortcut to start menu\program files rather than start menu\accessories (thats a smartphone directory)
3. Installs straight to \program files\wm5torage rather than having a destination dialog.

excellent. does exactly as you say it should.

This program is one of those must haves. The USB-like storage was want enough, but with the boot facility it is godlike. As long as I have my cable with me I can boot to my puppylinux install wherever I am without the need to carry an extra USB key around.

Gotta love getting updates to EXCELLANT apps.
I agree, this is one of those absolutely-why-didn't-microsoft-include-this-awesome apps.

sry this may b a stupid question but what does he mean by full application unlock? does he mean the prog or the ppc?

This is some wicked software, now if I go anywhere who hasn't got activesync I can use my Vario as a USB stick!!!
Thanks Guys.

Very, very nice..
Want to make something cooler? Make a program that uses the devices camera through the USB to make it a sort of web cam....

dewild1 said:
Very, very nice..
Want to make something cooler? Make a program that uses the devices camera through the USB to make it a sort of web cam....
Click to expand...
Click to collapse
That has already been made
http://forum.xda-developers.com/search.php

GldRush98 said:
dewild1 said:
Very, very nice..
Want to make something cooler? Make a program that uses the devices camera through the USB to make it a sort of web cam....
Click to expand...
Click to collapse
That has already been made
http://forum.xda-developers.com/search.php
Click to expand...
Click to collapse
yep coolcamera its a good program

meschle said:
Latest version of the excellent Wm5torage 1.72 device to usb stick convertor - i have modified installer so that its suitable for PPC installation rather than smartphone.
mods are:
1. No setup.dll so no request to restart device (not required anyhow)
2. Installs shortcut to start menu\program files rather than start menu\accessories (thats a smartphone directory)
3. Installs straight to \program files\wm5torage rather than having a destination dialog.
Click to expand...
Click to collapse
Gave me some problems this version. Slow down my system like hell. InClose stopped working. Had to soft reset and then I unistalled it. Ver 1.3 worked fine, even with the extra accessory folder. Any information where I could find it? Thanks.

1.73 is out
Incompatibilities with some devices(started in 1.6x) should be fixed at this release.

what is it
sorry for the uneducated question: what doed this program do?

Read the first post in this thread...

I cant download it from modaco, it says file is reported as broken. Any chance somebody can attach 1.73 here? thanks

[Q] help needed for wfi sd card please people

hi people'
would any member know anything about how i can connect a pluscom wfi card to my xdall himalaya please so i can hook it up with my wireless router
do i install the drivers on the pda' if so how do i install them because im running windows 7.
would anyone have a link for the updated drivers if i need them.
thanks in advance because all you guys are so bloody wonderfull.
rgds basic

basicbri said:
hi people'
would any member know anything about how i can connect a pluscom wfi card to my xdall himalaya please so i can hook it up with my wireless router
do i install the drivers on the pda' if so how do i install them because im running windows 7.
would anyone have a link for the updated drivers if i need them.
thanks in advance because all you guys are so bloody wonderfull.
rgds basic
Click to expand...
Click to collapse
Maybe this helps: http://forum.xda-developers.com/showpost.php?p=8690649&postcount=13
The attached .cab file is to double click on your device.

basicbri said:
hi people'
would any member know anything about how i can connect a pluscom wfi card to my xdall himalaya please so i can hook it up with my wireless router
do i install the drivers on the pda' if so how do i install them because im running windows 7.
would anyone have a link for the updated drivers if i need them.
thanks in advance because all you guys are so bloody wonderfull.
rgds basic
Click to expand...
Click to collapse
Hi I have the same card as you. It works fine on hima.
1. You need to install drivers and app for it on hima (without card inserted)
2. Soft reset your hima.
3. Power on your hima and insert the card (after boot) it should pop up automaticli on your status bar that is searching for Wifi. If it does`t show go to the app that you installed and configure (mine work on defaults and did`t need to configure anything)
I tested the card on luby`s WM 6.5 rom
http://forum.xda-developers.com/showthread.php?t=741800
And uploaded original drivers, app and manual that is coming on cd with card.
http://www.box.net/shared/mugo8z80u1
Hope it works for you