Related
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
crus said:
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
Click to expand...
Click to collapse
Install this...
copy to device through ActiveSync explorer.
Goto device's File Explorer, look for the CAB file that you just copied.
Tap on the file to install.
Sandisk Driver
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com, have tried both the Wifi, and the combo wifi card, the wifi works well. The combo also works okay, although does have some lock ups, but IT DOES WORK!!!
I have been tyring to export ROM without doing any harm to device as only have it on load for a few more days, as want to bring the SDIO driver accross to my XDA2.
Have noticed the BT is having problems also, and would envisage an update is coming for this to bring up to new version that is on XDA IIs.
henrylim:
Install this...
Click to expand...
Click to collapse
Thanks.
I shall try it when I get off work tonight.
Thanks again.
But one more question, does anyone know if the WLAN adapter should come with the XDA Mini?
You have to install the driver first .
After that no problemos
it work fine ( WifiFofum work very good !!!)
Re: Sandisk Driver
lampard said:
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com
Click to expand...
Click to collapse
Hi,
the latest driver from sandisk that you have mentioned, is it this?
http://www.sandisk.com/download/Drivers/wifi/256mb-setup03.exe
or something better?
I'd tried this before in WM2003SE 2.06. No dice. If it works in Magician, I'm inclined to hope that the SDBus drivers has been updated, and (cross my fingers) that SDIO H/W slot is the same.
hmm....something more to be cheerful about during Christmas...
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Different version of SDIO drivers
lampard said:
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Click to expand...
Click to collapse
I wonder why I didn't look at this before.
The Mini and JAM has the same version of SD drivers:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"SDMemory"="0.25.00"
"Common"="0.25.60"
"SDBusDriver"="BSQ 1.2 + 0.25.00"
Whereas the 2.02/2.06 has these version:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"Common"="0.15.10 HIMA"
"SDBusDriver"="0.15.00 HIMA"
Anyone can confirm the 2.20tl version?
The drivers are in the ROM though, and it's not a simple search and replace operation.
I wonder, would it be worth to upgrade the Himalaya with Magician ROM???
I'd quite a few pple now that says that the 256MB SD drivers for PPC 2003 works with the Mini now. I've tweaked the registries for the Himalaya, but only get as far to allow the wlan tools to recognise the card..still no joy.
Guess what...sd wifi of (256 combo) working....
I've managed to get the Wifi portion of the Sandisk Wifi 256 working
on my 206 ROMed XDA2 device.
The steps are abit complicated, so try at you own risks!
The steps are:
(a) download the sandisk 256 drivers from www.sandisk.com (256mb-setup03.exe)
(b) remove your XDA2 device from the cradle, and execute the file.
(c) Goto to the Microsoft ActiveSync folder, and look for this folder "SanDisk Corp\Wi-Fi_WINCE400"
(d) Within this folder, there is a Pegas.2577.CAB
(e) Using WinCAB Manager, open this CAB file
(f) Within the Pegas.2577.CAB file, there is another "SDBusDriver12.CAB" at file index 5.
(g) Now, download the Magician ROM (the SD card version) from the forum's ftpsite.
(h) Using dumprom, dump the contents of the Magician ROM and locate 2 files "SDBusDriver.dll" and "SDMemory.dll"
(i) Replace these 2 new files with the ones in the "SDBusDriver12.CAB"
(j) Re-save the "SDBusDriver12.CAB" and replace the file in "Pegas.2577.CAB"
(k) save "Pegas.2577.CAB" and connect the XDA2 device back to the cradle.
(l) install the Sandisk drivers following the prompts.
(m) Soft reset the XDA2 device when done.
Insert the 256MB+Wifi SD card, and activate the Wifi !!!
You might find that I've gone the long way as I have yet to figure out the full implications of the setup. It doesn't replace the original DLL files in /Windows as the 2 files are installed as CUSTOM SD drivers.
Perhaps we can pool our brains together and crack the SDMemory portion.
I am surfing on my XDA2 device using the Wifi as I am writing this, so I believe we are close to the verge of cracking this.
hello,
I recieved my s100 with the sd wifi/storage card and trying to setup a wifi connection.
I installed the sd drivers and i scanned for an wifi accespoint i noticed that my neigboars are having a wifi acces point.
but i get this message:
unable to obtain a server assigned IP adress.
what i'm a doing wrong?
I can't get wifi to work!
hello,
I just can't get the thing working
I tryed the following:
I installed the driver from scandisk that was on my cd ( the same as mentioned here) everything goes well but i looks like he doens't install the pegas stuff.
I do get a wifi connection link ( settings ->connections -> sandisk wifi
I alsow tryed the tutorial of henrylim but i get stuck at point c becaus there are no files in my activesync folder.
I did try to find wifi networks and i did find a netwerk from my neighboars, i saw there connection if it was securred and mac address an everything.
I didn't get a IP address
@ the AP Browser part i saw it and the connection was 33% there.
But when i go to the status it doens't show anything but that the device is Associating and then the network name.
if i than try to use the internet it wants to use gprs and not the wifi card.
can anybody plz help me I would really like to use the wifi on my magican.
Do you have a DLINK AP ?
If so, ithey do not get along very well
brilca said:
Do you have a DLINK AP ?
If so, ithey do not get along very well
Click to expand...
Click to collapse
i don't really know what you mean.
i was talking about the standard sandisk software and there is a tab called "AP Browser"
what is the brand of the access point wi-fi that you have ?
brilca said:
what is the brand of the access point wi-fi that you have ?
Click to expand...
Click to collapse
bussy deciding whitch one to buy, I'm now trying to access the neigboars netwerk.
Unless your neighbour has specifically allowed you access to his network you will probably not be allowed to connect.
And as long as you're trying with your neighbours access point, brilcas question about the make of the access point would apply to the one they have.
OK I had a wifi connection.
my brother turned his laptop into an AP and i had a connection with it.
So I know the wifi on the imate works but there's still one problem.
When i was connected with wifi and i tryed IE explorer it wanted to connected by using wifi.
How can i change that into wifi?
eltinio,
I am still trying to get WiFi to work on the WM2003SE UK XDAII version...
In response to your question, you need to tap Start > Settings > Connections and then tap Connections (make sure your WiFi card is in and enabled).
Tap the Advanced Tab and then tap the Select Networks button, from the first drop down list select My Work Network and then tap Edit.. > Proxy Settings tab and then tap the 'This Network connects to the Internet' checkbox and then tap OK to save and OK again to exit the connection manager.
You will no be able to browse the internet...
henrylim,
Could you post a link to the WiFi drivers you cooked or provide the file in this thread please so we can all test it out as most people may not able to perform the tasks you have listed to enable the WiFi drivers.
Thanks in advance,
Godz
XDA Mini and SD Wi-Fi
Do you guys know if the SD Wi-Fi card Sandisk or Sockets supports WPA encryption when added to the Mini and also if the problems with Dlink 54G/B wireless access points have been fixed yet?
I have been issued a 02 XDA ll for work but I am unable to sync with the works PC because it doesn't have AS installed
The XDA has 2003 .Could someone please tell me where I can download the correct version and how I install it onto the Hima please. I have a 2Gb SD so I could presumably put it onto the SD card on my PC the put it into the Hima and install from there yes?
I have searched and searched for flippin hours both here and everywhere else on the net without any luck. Hope someone can help me or I will not be able to use this for work.
have finally found it on the Hima in file explorer thanks .Wish there was a simple explanation of setting this up somewhere for a first time user
Download Active Sync from Microsoft and install it on your PC, there is nothing to go on the Himalaya.
Thanks for your help. Sorry I missed your post . Successfully synced thanks
Hello there from Italy.
I posted this because of a problem that is driving me mad since some weeks. first my data.
pc:
win xp sp3
outlook 2003
active sync 4.5
qtek 9000:
win 5
sbsh phoneweaver
sbsh iLauncher
memmaid
sprite backup
The problem is that when I connect my qtek to the pc via the usb cable the pc tells me that it had a problem installing the new hardware. After that no active sync is coming out and thus no syncronization.
It is definitely a pc bug since I can syncronize my qtek in other pc.
Following some italian forum I uninstalled all usb controllers and things but had no success.
I'm desperate. Can you please help me?
My bests
Michael
Guys...................no one really can help me out?
C'mon, this is a giant leap for me but a small step for you...............
Michael
Did you uninstall/re-install ActiveSync? If not, try that.
If you have and that didn't fix it, try going to Start > Settings > Connections > USB to PC and untick "Enable advanced network functionality" then try again.
Thanks Nanoruler for your quick response.
Yes, I did try to reinstall AS 4.5 plus I have no icon for USB to PC connection in my qtek 9000.................what's going on here?
Thanks............
Michael
Try running the attached CAB
Nanoruler,
thanks a 1000 for your help. Not being a nasa computer expert, can you tell me what is the cab attached and how to use it?
Thanks in advance
Michael
Nanoruler, are you there, my friend?
I'm relying on your help for this..............
hope to read from you soon.............
Michael
Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!
Hi Batvanio,
can you please tell me how to install it? I'm a bit beginner here............
bests
Michael
batvanio said:
Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!
Click to expand...
Click to collapse
It's working with vista?
please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael
michaelmellner said:
please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael
Click to expand...
Click to collapse
Depend if you´re using Vista or XP
Vista: Windows Mobile device Center
XP: Active Sync 4.5
Just google it, download and install
Good luck,
ok. I gave it a try, but nothing new happened. I want to think it is not the usb switch fault but my lack of knowledge. Since I don't know how to install it, I clicked on the xml file. An IE page opened wanrning me of the threat running activex commands. I accepted it and clocked on run. After that I tried to hook my qtek but, as mentioned, nothing happened.
Did I install it the proper way?
please let me know about it.
all the bests
Michael
Michael, just copy usbswitch.cab to an SD card, and then find it on your Uni using File Explorer and click on it. It will then install.
Hi Jon and a milion thanks: finally someone who guided me through. Gosh, after all it didn't take that much, uh? All it took was your words.
really really thank you
Michael
iiiiiiiiiiiiiiiiihaaaaaaaaaaaaaah!!!!!
it works: after a zilion months and tests I finally got my universal to hook with my laptop again.
Thanks a lot for that USB switch: it sure helped me out on this while hundreds in various forums across the world couldn't..............
Incredible........
Michael
xda-developers - the best place for gathered information!
definitely!
michael
cant connect
Hey guys... i just bought a qtek 9000 and i can't sync it with my laptop. Running
WinXP SP3
ActiveSync 4.5
and
WM 6.1 RAN ROM
I tried the usbswich cab and nothing happened. Can you help me?
The PC installed the device but activesync is not even trying to sync the device.
Congrats on your Universal!!
Try to uncheck the advanced functionality under usb to pc
Also have a deep read here:
http://forum.xda-developers.com/showthread.php?t=549207
Hope it helps,
hi everyone...I have a Fujitsu Siemens Pocket LOOX N100 that runs on wm5.I wonder if somebody knows a way to get it into service mode because I want to replace the GPS software that comes with the unit, not only because the maps are way out of date, but because the don't have a map for my country. I would like to install iGo because I have it on another GPS and I love it...
Thanks in advance...
Loox N100 does not run WM 5.1 but WinCE 5.0
To access the device you need to enable ActiveSync und the device.
I join two CAB files in order to enable or disable ActiveSync.
Just rename the file you need to MN6-update.cab and put in root of miniSD card (save original one first) and reset device.
After that you can access the device via ActiveSync and install whichever software you like.
If you want to enable ActiveSync and start on a clean desktop you should use the CAB file attached.
In there you have
REGEDIT4
[HKEY_LOCAL_MACHINE\init]
"Launch50"="explorer.exe"
Click to expand...
Click to collapse
Sascha
first of all I want to thank you Sabo, I'm really looking forward to get back from my trip and test those cabs...
but first let me see if I got it wright:
1.the loox_n100_enable...zip are the files to enable/disable the activesync, but would I have access to the WM menus??I ask this because the N100 starts in a kiosk mode
2.the MN6_update.cab - is going to start the N100 in explorer mode not kiosk??
I have a Loox n110 running TT6 and I got all my hacking info from here . It's a very long thread going back 3 years but it has everything you need to know. I installed the iLooks desktop starting off with the Active Sync cab trick as mentioned to access WinCe.
Hope you find it useful.
hi..thank you very much guys for all the help...until now I wanted to sell the n100 but now I'm again very happyyyy, I can barelly wait to start experimenting...
Forgot to mention that with a Mini SD to Micro SD adapter I can run a 16gb memory card on it so you can really load it up - no wifi though.
d3nika said:
let me see if I got it wright:
1.the loox_n100_enable...zip are the files to enable/disable the activesync, but would I have access to the WM menus??I ask this because the N100 starts in a kiosk mode
2.the MN6_update.cab - is going to start the N100 in explorer mode not kiosk??
Click to expand...
Click to collapse
1. No, just access via ActiveSync
2. Yes
d3nika said:
hi..thank you very much guys for all the help...until now I wanted to sell the n100 but now I'm again very happyyyy, I can barelly wait to start experimenting...
Click to expand...
Click to collapse
Don't sell this fine piece of hardware.
Where els do you find a PND with removable battery which is this small and where you can disable static navigation in order to use it easily for geocaching or other things.
custardo01 said:
Forgot to mention that with a Mini SD to Micro SD adapter I can run a 16gb memory card on it so you can really load it up - no wifi though.
Click to expand...
Click to collapse
I can only see the first 4 GB of a microSDHC card.
Do you have a driver in order to see the rest of the card?
Sascha
SaBo said:
I can only see the first 4 GB of a microSDHC card.
Do you have a driver in order to see the rest of the card?
Sascha
Click to expand...
Click to collapse
My mistake sorry although the system recognises the capacity of the 16gb card when I actually browse the folders not all files are showing. I forgot this as I don't use this card usually in the Loox.
It does recognise all files on my 8gb microSDHC card, however. My built in driver is "SDHC_SC2410.dll". I haven't installed any other drivers myself.
Mine is the Loox n110 with the built in flash drive of 2gb using driver "FLASHDRV.dll". Not that it would affect the reading of the SDHC memory.
Hope that answers your question.
Hello all, I know it is a very very old topic !
But I found in my father's place this old Loox N100 piece of tech and I was trying to do some stuff with it.
I managed to access Windows CE 5 thanks to those CAB file provided about this topic.
But then I can't install or modify anything.
Can someone help me to update the maps of the GPS or install a more recent one please?
I have been searching for hours on internet but I can't find how to do. I don't understand the use of ActiveSync neither. My PC is running on Windows 11.
I tried to copy some exe or cab file to the Mini SD card, but when I want to install them from the device, I have an error "xxx is not a valid windows CE setup file"
Anybody could help me achieve something with this old tech?
Thanks a lot and sorry for the old post.
BTW: Since I used the CAB file above, I always boot on Windows CE first and also the USB connection to the PC doesn't open the SD Card anymore. I tried to use the "disable activesync" CAB file above, but it continues to boot on Windows CE and USB connection still not work.
Anyone with knowledge of this old tech can help me figure out a few things ?
At least how to revert it back to normal haha
Thanks
when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !
i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?
where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.
it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???
can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.
hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.
Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.
It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)
KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.
HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.
sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me
aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!
Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers
Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.