Database Users

Softick Card Export II version 2.11! Now working on Wizard!

read more: http://www.softick.com/news.html#83

Re: Softick Card Export II version 2.11! Now working on Wiza
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...

Re: Softick Card Export II version 2.11! Now working on Wiza
bolasz said:
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Click to expand...
Click to collapse
It works for my 838.. I have lockup and unable to switch to SDcard mode only if I connected to my PC and activesync once and unplug. But that seems to be the activesync issue in my 838 which fail to free itself from unplug from PC. So it cannot switch to SDcard mode..and prompt me an error message.
I have already switch to AS4.1 but does not improve my situation.
What is Microsoft doing here?? :roll: A soft reset is the only way to get my device syncup again.. :x

I own this program since I had my XDA mini ...
finally I can use it again to copy some files to my pda and use it as a memory stick...
I also noticed some problems:
1. after I connect the USD cable and the PC recognized my pda as a memory stick, Windows XP asked me to make a reboot in order to be able to use the new 'harddrive'
2. after I copied a .jpg to my pda it looked like the storage card is no longer recognized by WM5. The icons of the shortcuts to programs I installed are missing and I cannot browse with TotalCommander to my storage card.
After disconnecting the USD cable, my storage card could be found again - is this a bug or a feature?!
After the first connect in mode 'Card Export' I switched to 'Active Sync' and the synching went on without any problems.
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
This looks also to me like an incompatibility between card export and active sync.
Hmpf ... rebootet the phone and connected - voila - my Wizard was again properly verified as Memory Stick and I again could upload another .jpg to my device.
It looks definately unfinished ... but it is working quite acceptable to me, though there is a lot room for improvement, it will get the job done, if I need a memory stick 'on the go'.
My device is a HTC Wizard, O2 german.

i may be wrong on the second point, but activesync alters a file when you transfer it to the pda,
so if you transfer a file to the card (even using a card reader) then put the card back in the pda wm5 will not recognise it properly.
point 1 should only happen the first time of detection.

have no problem with my XDA II...

Chris09 said:
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
Click to expand...
Click to collapse
I am experiencing the same... Please update this topic if you'll find a solution.

i'm having the missing dlls dialog problem too.
I noticed that once you activesync'ed, you can't switch to card mode and need to reboot the device.
However, mine can't seem to work anymore. It won't even switch. But I also tried disabling my today's screen (pocket plus and pocket breeze) and it works... but only the icon manage to change. My PC can't detect it as a mass storage device though.
Any luck?

Mine is working fine, I got that dll message once but a soft reset fixed it.

Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.

vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.

eilz said:
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
Click to expand...
Click to collapse
Same here too!! using ver 2.12
ver 2.11 worked fine with me, so most probably I will downgrade to it now.
I emailed the tech support and waiting for their reply. I will post it here in case I get anything new.

I just tried v2.12, and it didn't work. I found v2.11 on some download site, and installed it. v2.11 worked fine on Qtek's 2.8.7.1 ROM.

I cant get this to work either using 2.12. I get the device manager problem as mentioned previously. Does anyone know where can i get 2.11 from?
found it here:
http://www.softick.com/files/CardExportPPC211c-softick-en.zip
but i get the same problem

You can find previous versions in the "download" section on the left.
I'm having the same issues, used to work fine with 2.11, then it stopped being able to write but could still read (this is on my Mac), and now with 2.12 I can't even get the thing to mount. I'm talking with the developer to see if we can get a fix.

Any 2.12 and 2.11 not working for me... My computer and three others shows me message that they don't have drivers

I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35

pewe said:
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
Click to expand...
Click to collapse
I'm a bit confused regarding their reply.
You asked a question about the Wizard and they replied saying they are waiting on delivery of HTC Universal to examine it better. I'm not sure what the Universal has to do with compatibilty for the Wizard as they are completely different devices with different hardware. (Mybe i'm wrong and the hardware components that Card Export uses is actually the same on both devices)

Puckster -
I noticed this on second look, and asked for clarification.

just want to inform everyone that there is a free alternative. it's similar to softick card export that it turns your device into a plug-and-play card reader. it's called wm5torage (yes, the number '5' is the letter 'S')
http://forum.xda-developers.com/viewtopic.php?t=45411&highlight=wm5torage
it does not have the system tray icon that enables you to switch between activesync and export mode, but rather you open the app in your accessories folder and activate/deactivate it from there.
but hey, it's free and it works

WM5torage problem - please help!

Many apologies if a solution to this has already been posted - if it has could someone lead me in the right direction?
My problem is with transfering large files to the Ameo's Microdrive. Activesync is too slow and wont transfer large files. I have tried two different versions of wm5torage, each time installing correctly and soft resetting. I am able to connect to my computer as a mass storage device without a hitch, and all files etc show up. The problem is that when i try to move, say a DivX onto the Microdrive after about 30 seconds I receive the message: "canot copy .....: cannot find the specified file. make sure you specify the correct path and file name"
Please can someone help me with this as it's ever-so-slightly doing my head in.
Many thanks
p.s. if it's any use i've tried this with both wm5 AND 6 with the same disappointing result

wm5torage works like a charge just dl on modaco forum then run it, your pc will see your ameo like a usbstick .

leoni1980 said:
Many apologies if a solution to this has already been posted - if it has could someone lead me in the right direction?
My problem is with transfering large files to the Ameo's Microdrive. Activesync is too slow and wont transfer large files. I have tried two different versions of wm5torage, each time installing correctly and soft resetting. I am able to connect to my computer as a mass storage device without a hitch, and all files etc show up. The problem is that when i try to move, say a DivX onto the Microdrive after about 30 seconds I receive the message: "canot copy .....: cannot find the specified file. make sure you specify the correct path and file name"
Please can someone help me with this as it's ever-so-slightly doing my head in.
Many thanks
p.s. if it's any use i've tried this with both wm5 AND 6 with the same disappointing result
Click to expand...
Click to collapse
i was gettin this error as well...
its something to do with activesync... screwing up
did you try restarting your computer that sometimes helps ?

xmen06 said:
wm5torage works like a charge just dl on modaco forum then run it, your pc will see your ameo like a usbstick .
Click to expand...
Click to collapse
yes it is off modaco and it does connect like a usb stick; its just that it doesnt maintain this connection during file transfer and gives the error mentioned above

Try these...
leoni1980 said:
yes it is off modaco and it does connect like a usb stick; its just that it doesnt maintain this connection during file transfer and gives the error mentioned above
Click to expand...
Click to collapse
Hi Leon.
What version are you running? Try this one if you're not already running it.
If all else fails...and this is cumbersome, but works everytime....use SafeMode Advanced and use it at boot time...no other drivers will be loaded and no conflicts.. It will def work then. After transferring your files, soft-reset to go back into standard WM5/6.
Let us know how you got on.

When I try with version 1.75 it is unreliable and often produces the error message you see. It may be luck but I've not had problems with 1.73. I disconnect the USB cable first before running, activate the software, then reconnect the cable.
When it does go wrong my Microdrive file table corrupts, also the Ameo hangs on the rainbow-wheel. I soft reset. Once I get it working I get errors if I need to copy the same file again. To fix this, I open WM5torage and run Check Disk on the Microdrive from my PC.

what you need to do is go to settings and the connections tab and turn off the advanced network functionality in "USB to PC". then use WM5torage.

I've tried unchecking "advanced network functionality" but to no avail. I've tried uninstalling activsync, and I've even tried it on a pc which has NEVER had Activsync on it - all with the same disappointing result.
Invariably WM5torage crashes and is 'unkillable' (if that's a word!) via Running Programs. Whatever I do it just crashes when I try to deactivate it.
I tried a hard reset of the device AND microdrive prior to installing Wm6 and THIS didn't work either. I've also tried the WM5torage cab posted in this thread by mackaby007. No luck.
I've tried Softkey Card Export ii as well and that just keeps reconnecting to activesync before windows even gets chance to recognise it as a mass storage device.
I think I've ran out of ideas.....
I'
Olipro said:
what you need to do is go to settings and the connections tab and turn off the advanced network functionality in "USB to PC". then use WM5torage.
Click to expand...
Click to collapse

yaughan said:
When I try with version 1.75 it is unreliable and often produces the error message you see. It may be luck but I've not had problems with 1.73. I disconnect the USB cable first before running, activate the software, then reconnect the cable.
When it does go wrong my Microdrive file table corrupts, also the Ameo hangs on the rainbow-wheel. I soft reset. Once I get it working I get errors if I need to copy the same file again. To fix this, I open WM5torage and run Check Disk on the Microdrive from my PC.
Click to expand...
Click to collapse
Just tried it with WM5torage 1.72 and that seems to be working fine.
Just transferred a 700mb file without hitch.
Wonder what the problem was with 1.75

try out card export 3.0
i heard this is a god sofwtare

I tried to see what could be wrong
I installed Card Export II but it would not ran and complains of missing dll's, but WM5torage 1.73 worked instantly. I have just transfered 3.5 Gb of music and some clips to test it. No problems yet and transfer took about 20 mins.
Could your problem be caused by installed software? Will have a look at Card Export 3 (never heard of it, or their notice must have gone to spam folder)

I've always been able to use version 1.73 smoothly in the past. Then, later I tried out version 1.75 thinking that it might work better. I could connect and activate. I had no problem transferring small files. However, it always stopped recognising the device as a valid USB mass storage a few minutes into the transfer operation. The de-activation would hang the device. I then went back to the older version that I still kept in my PC, (Modaco only has the faulty new version), and everything works again. I transferred a 3.7 gb file without problem.
So, make sure you do not use version 1.75 from the Modaco site.

doh!
I just read the first page and installed the 1.75 version which does crach my ameo as well. Can anyone tell me where to get version 1.72?

Please test the new WM5torage 1.78 beta version on your Athenas. It should again work on long transfers without glitches.
Feedback is needed, so please report in the main support forum here - http://www.modaco.com/WM5torage-t238545.html
Unless people with Athenas will participate in testing, there will be no good support for it...

Where can we get the 1.78 version
when I go to the link in the previous post, and click on download, it suggest only versuin 1.75
I'm having same error described in post #1 on my HTC Athena WM6.
Actually the error occurs only when using PC with WIN XP OS, while on my laptop which runs Win 2000 I don't have that problem at all.
Cheers

I've tried version 1.73, 1.75 and 1.78 beta 2 and only 1.73 is working.
On other versions i'm getting same error as Leoni
Cheers

I've tried loads of versions now but can't seem to gwet my hands on 1.73.
All the cabs marked 1.73 are 1.75
Can someone post a working 1.73 cab please

Johnston411 said:
I've tried loads of versions now but can't seem to gwet my hands on 1.73.
All the cabs marked 1.73 are 1.75
Can someone post a working 1.73 cab please
Click to expand...
Click to collapse
Here is version 1.73

the trick is to disable the advanced network support option in Connectivity in settings under the "PC-to-USB" icon

Olipro said:
the trick is to disable the advanced network support option in Connectivity in settings under the "PC-to-USB" icon
Click to expand...
Click to collapse
yes its a good while ago now since I posted that thread. but I do recall trying unticking the advanced network functionality box with my original wm5 tmob rom and also with the leaked wm6 rom. I also recall that it still didn't work. I really did try everything but only found success when installing the older version of wm5torage.I still cannot fathom why wm5torage 1.75 worked for some people but not for me. I haven't tested it since installing p.k.s black rom but will try tomorrow.
sorry to be a buttlicker olipro but cheers for your work by the way

ESNkit by tatotato for 6700/Apache: change ESN, NAM, SPC, etc.

For about a year I have looked for a way to read and write NAM data from HTC CDMA phones.
Today I finished my search and have put together a kit for doing the above stuff, at least for the Apache/6700. It includes all the drivers and a very nice program to hack around with your phone (CDMA Workshop).
You guys have helped me out SO much in the past, so I'd like to give something back.
So without further ado, here are the instructions.
1. Remove all drivers from previous attempts to get it working (if any) then download the attachment and uncompress to an empty folder.
2. In ActiveSync, go File -> Connection Settings and uncheck the box labelled "Allow USB connections".
3. On your phone, go Start -> Programs -> File Explorer and browse to the Windows folder.
4. Scroll down until you find a program called DMrouter. Open it and click start.
5. Plug your Apache into cradle/cable.
6. The add new hardware wizard will come up. Do not allow it to connect to windows update. Click next and select "Install the drivers from a specific location" and browse to the drivers folder inside wherever you put the ESNkit.
7. If all goes well, another add new hardware wizard will come up. Repeat the exact same process as step 6.
8. On your computer, go Start -> Control Panel -> System -> Device Manager -> View -> Devices by Connection. Then play around until you see under a USB Root hub a USB composite device with two devices in its sub-tree. One of them will have a COM port number e.g. COM6. Write this down.
9. Go into the ESNkit folder and run cdma_wshop_loader. The password is ogmisthebest
10. CDMA workshop should load. Select port you wrote down e.g. COM6, click Connect, click Read, and you're in!
How to read SPC (Greetz to rafaelc, this is for you )
After step 10, go to the Security tab, and under the SPC section, select Universal, EFS Method in the listbox.
Click read.
Click OK in the dialog.
There will be a dialog pop up with a whole lot of dots and numbers. The first 6 Numbers after the dots end are your SPC.
If you want to change NAM data with this SPC, type it into the box and click SPC then click Send and go to the NAM tab, click read, and hack away!
How to change ESN (Proof of concept , changing to an actual ESN is illegal pretty much everywhere)
After step 10, go to the Security tab, and under the ESN section, select Universal, EFS Method in the listbox.
MAKE SURE YOU WRITE DOWN YOUR CURRENT ESN JUST IN CASE.
Click Read.
It will show your ESN!
To change, type in your new ESN and click write.
Done!
Have fun guys!!
http://clickapic.com/file/3556/esnkit-zip.html
Here is the link - with correct drivers this time!
http://www.mediafire.com/?llpenydz90l
oh and greetz to helmi_c!
You are THE MAN helmi. Without you I would have no motivation to hack around with my phone.

RS Mirror: http://rapidshare.com/files/101115120/esnkit.rar

thanks man.

Lvballer06 said:
RS Mirror: http://rapidshare.com/files/101115120/esnkit.rar
Click to expand...
Click to collapse
no drivers cdma in folder,

My silly old mistake - look for version with correct drivers above.

to program nam help
Good Friend I am of Venezuela and have a problem with my apache ppc6700 want to change minlock to him and have intetado me many form and I have not been able agradeco that can help me

file has a backdoor trojan

Confirmed
charlesnett said:
file has a backdoor trojan
Click to expand...
Click to collapse
Avast found it too!

There is no backdoor trojan, I suspect Avast may be picking up the loader for the program as a trojan. Avast is a hypochondriac program that sucks anyway
My NOD32 doesn't pick up anything.

My currently updated NOD32 AV shows :
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar
multiple threats connection terminated - quarantined Threat was detected upon access to web by the application: C:\Program Files\Mozilla Firefox\firefox.exe.
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar » RAR » esnkit\cdma_workshop_FULL_Cracked.exe probably a variant of Win32/Packed.Themida application
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar » RAR » esnkit\cdma_wshop_loader.exe probably a variant of Win32/Rbot trojan

jbeam06 said:
My currently updated NOD32 AV shows :
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar
multiple threats connection terminated - quarantined Threat was detected upon access to web by the application: C:\Program Files\Mozilla Firefox\firefox.exe.
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar » RAR » esnkit\cdma_workshop_FULL_Cracked.exe probably a variant of Win32/Packed.Themida application
http://rs342tg2.rapidshare.com/files/101115120/91242/esnkit.rar » RAR » esnkit\cdma_wshop_loader.exe probably a variant of Win32/Rbot trojan
Click to expand...
Click to collapse
Wowee...
I think it may be detecting the loader as a virus because of the way it fiddles with the RAM. Just a guess though. Note the _probably_ a variant. It does honestly work fine.

What just happened!!!
I did everything that you said, and it restarted my computer when i opened the program!

To change the esn... does that mean i can use a phone that is on the lost list then?

bigsniperboy said:
What just happened!!!
I did everything that you said, and it restarted my computer when i opened the program!
Click to expand...
Click to collapse
Program is probably buggy, does some stuff with memory pointers to make the CDMA workshop think its registered and may have thrown something out of balance. I give you my word that to the best of my knowledge your computer will not be broken in any way.
camadot said:
To change the esn... does that mean i can use a phone that is on the lost list then?
Click to expand...
Click to collapse
Hell yes it does.
ALSO, update:
I'm looking for a full version of CDMA workshop that doesn't throw everybody's antivirus programs into paranoid spasms, will post back later with results.

I tried it again and it worked this time, but i still have the drivers from last time, how do i uninstall them? thx

went into antivirus spasm mode.
both copies i tried to download.
did you ever find a solution??
sounds like a handy piece of software i'd like to add.

Great! It looks like i'm gonna try it on my Apache..

does this work on htc hero?

abs0lut3z33r0 said:
does this work on htc hero?
Click to expand...
Click to collapse
Well the file only contains the drivers for the Apache and the ESN change program, but if you can find the Hero drivers, the program in the rar should work fine.

thank you
i cound not understand very much

Is someone working on this?

According to this text extracted from an interesting review of the Touch Diamond (http://www.pocketnow.com/index.php?a=portal_detail&t=reviews&id=1077&p=1)
"By default, when you plug the Diamond into your computer with the USB cable, it asks you if you want to use ActiveSync or connect as a Disk Drive. If you choose "Disk Drive," the 4GB of Internal Storage will show up on your computer as a regular USB external hard drive or memory stick. That way you can copy/transfer/open files to your heart's content without having to install ActiveSync and without even needing to use a Windows PC (you can use a Mac or Linux machine instead)."
My question is... Someone is working on porting this functionality to other devices?
I know that there are already alternatives such as WM5torage or CardExport. But the option in the Touch Diamond seems to have interesting details.
...Greetings!! ;-)

New Wm 6.1 roms have this feature....
Just use USBtoHD function.....

Really? I have 6.1 a few months but this function is not in 6.1...

Petulinek said:
Really? I have 6.1 a few months but this function is not in 6.1...
Click to expand...
Click to collapse
Maybe the rom you flashed hasn't this feature.... Sometimes it is called "Usb stick".... Here you can see a pic of it....

flaviopac said:
Maybe the rom you flashed hasn't this feature.... Sometimes it is called "Usb stick".... Here you can see a pic of it....
Click to expand...
Click to collapse
The rom you mention comes with WM5Torage 1.8... It does not seem very logical if the system itself has this function.
I'm not sure that we are talking about the same thing.

USBtoHD in diamond is made specialy for a flash (nand) part and it's not working at the moment with the sd-cards.
MKS said:
The rom you mention comes with WM5Torage 1.8... It does not seem very logical if the system itself has this function.
I'm not sure that we are talking about the same thing.
Click to expand...
Click to collapse

NikMel said:
USBtoHD in diamond is made specialy for a flash (nand) part and it's not working at the moment with the sd-cards.
Click to expand...
Click to collapse
not true this is working on my prophet but I can't get it to work on my kaiser it shows the kaiser as a memmorystick on my pc but says there is no card inside.
So it works fine with sd cards... only the regs maight need to be edited on kaiser and prob Cruse too for it to work

looking forward to such an application

This sounds better...
gullum said:
So it works fine with sd cards... only the regs maight need to be edited on kaiser and prob Cruse too for it to work
Click to expand...
Click to collapse
Have you any information on where to touch the reg.
It would be great to mount a CAB with everything needed to run this on Kaiser, Touch Cruise,...

Total Commander
I always use Total Commander which you can download here: http://www.techspot.com/downloads/301-total-commander.html
with the "wince-plugin" which you can download here: http://ghisler.fileburst.com/fsplugins/wincefs.zip
Connect your device with ActiveSync or WMDC and your device (WM5 and WM6) will appear in your network environment.
kr.,
Frepke

Frepke said:
I always use Total Commander which you can download here: http://www.techspot.com/downloads/301-total-commander.html
with the "wince-plugin" which you can download here: http://ghisler.fileburst.com/fsplugins/wincefs.zip
Connect your device with ActiveSync or WMDC and your device (WM5 and WM6) will appear in your network environment.
kr.,
Frepke
Click to expand...
Click to collapse
OK... That is a good way to access the file system of our PDA's. But there are many different reasons that make it more useful to be able to use it as a pendrive.
But thanks for your help 'Frepke'.

Well nice to haer that gullum!!
To make sure we are talkin about USBToPCPopUp from diamond?
Can you share your working package?
tnx!
gullum said:
not true this is working on my prophet ..
Click to expand...
Click to collapse

PocketLoox N100 ServiceMode

hi everyone...I have a Fujitsu Siemens Pocket LOOX N100 that runs on wm5.I wonder if somebody knows a way to get it into service mode because I want to replace the GPS software that comes with the unit, not only because the maps are way out of date, but because the don't have a map for my country. I would like to install iGo because I have it on another GPS and I love it...
Thanks in advance...

Loox N100 does not run WM 5.1 but WinCE 5.0
To access the device you need to enable ActiveSync und the device.
I join two CAB files in order to enable or disable ActiveSync.
Just rename the file you need to MN6-update.cab and put in root of miniSD card (save original one first) and reset device.
After that you can access the device via ActiveSync and install whichever software you like.
If you want to enable ActiveSync and start on a clean desktop you should use the CAB file attached.
In there you have
REGEDIT4
[HKEY_LOCAL_MACHINE\init]
"Launch50"="explorer.exe"
Click to expand...
Click to collapse
Sascha

first of all I want to thank you Sabo, I'm really looking forward to get back from my trip and test those cabs...
but first let me see if I got it wright:
1.the loox_n100_enable...zip are the files to enable/disable the activesync, but would I have access to the WM menus??I ask this because the N100 starts in a kiosk mode
2.the MN6_update.cab - is going to start the N100 in explorer mode not kiosk??

I have a Loox n110 running TT6 and I got all my hacking info from here . It's a very long thread going back 3 years but it has everything you need to know. I installed the iLooks desktop starting off with the Active Sync cab trick as mentioned to access WinCe.
Hope you find it useful.

hi..thank you very much guys for all the help...until now I wanted to sell the n100 but now I'm again very happyyyy, I can barelly wait to start experimenting...

Forgot to mention that with a Mini SD to Micro SD adapter I can run a 16gb memory card on it so you can really load it up - no wifi though.

d3nika said:
let me see if I got it wright:
1.the loox_n100_enable...zip are the files to enable/disable the activesync, but would I have access to the WM menus??I ask this because the N100 starts in a kiosk mode
2.the MN6_update.cab - is going to start the N100 in explorer mode not kiosk??
Click to expand...
Click to collapse
1. No, just access via ActiveSync
2. Yes
d3nika said:
hi..thank you very much guys for all the help...until now I wanted to sell the n100 but now I'm again very happyyyy, I can barelly wait to start experimenting...
Click to expand...
Click to collapse
Don't sell this fine piece of hardware.
Where els do you find a PND with removable battery which is this small and where you can disable static navigation in order to use it easily for geocaching or other things.
custardo01 said:
Forgot to mention that with a Mini SD to Micro SD adapter I can run a 16gb memory card on it so you can really load it up - no wifi though.
Click to expand...
Click to collapse
I can only see the first 4 GB of a microSDHC card.
Do you have a driver in order to see the rest of the card?
Sascha

SaBo said:
I can only see the first 4 GB of a microSDHC card.
Do you have a driver in order to see the rest of the card?
Sascha
Click to expand...
Click to collapse
My mistake sorry although the system recognises the capacity of the 16gb card when I actually browse the folders not all files are showing. I forgot this as I don't use this card usually in the Loox.
It does recognise all files on my 8gb microSDHC card, however. My built in driver is "SDHC_SC2410.dll". I haven't installed any other drivers myself.
Mine is the Loox n110 with the built in flash drive of 2gb using driver "FLASHDRV.dll". Not that it would affect the reading of the SDHC memory.
Hope that answers your question.

Hello all, I know it is a very very old topic !
But I found in my father's place this old Loox N100 piece of tech and I was trying to do some stuff with it.
I managed to access Windows CE 5 thanks to those CAB file provided about this topic.
But then I can't install or modify anything.
Can someone help me to update the maps of the GPS or install a more recent one please?
I have been searching for hours on internet but I can't find how to do. I don't understand the use of ActiveSync neither. My PC is running on Windows 11.
I tried to copy some exe or cab file to the Mini SD card, but when I want to install them from the device, I have an error "xxx is not a valid windows CE setup file"
Anybody could help me achieve something with this old tech?
Thanks a lot and sorry for the old post.
BTW: Since I used the CAB file above, I always boot on Windows CE first and also the USB connection to the PC doesn't open the SD Card anymore. I tried to use the "disable activesync" CAB file above, but it continues to boot on Windows CE and USB connection still not work.

Anyone with knowledge of this old tech can help me figure out a few things ?
At least how to revert it back to normal haha
Thanks