Database Users

Help Me figure this one out

Ok guys.. what i would like to do is get the sound of the himalaya on my car stereo so i can watch a movie with perfect car sound instead of the internal speaker of the himalaya.
1st option: An FM Modulator that wil be connected through the 2,5mm jack but the problem here is i have to modify the cradle so the 2,5mm jack will fit.
2nd option: maybe a bluetoothdevice that is connected to the car stereo??
any other option??
i would like some opinions on how to deal with this one..

what i did was used a 2.5 to 3.5 jack converter (got it from hk but should be available elsewhere). then i used a an audio in-out jack (with a 3.5mm jack); plugged it into the now converted 3.5mm xda jack, then plugged the output into the audio input jack of my car stereo and there you go. almost similar to the system used for plugging in your ipod to the car's sound system. i use a bt headset so that takes of the calls. when the phone rings the music stops and the call comes in. butttttt....sometimes the media player doesn't come back on and i have to hit the play button. sure the unit is mounted but it can be a drag sometimes...

do u have some pics?
how did u solve the cradle problem blocking the 2,5mm jack input?
i am so curious!!

i'll have to take pics then. but the car mount i use is not officially for an xda unit; i just went and bought one when i was in hk for a business trip. the cradle is basic; clamps on the unit from the sides using those spring-action arms with anti-slip rubber-like material (?). the underside is supported by two stems...giving it the appearance of being a 2-legged fork. the supports are small enough so that they don't block the slot for plugging in the car charger and the microphone jack. the cradle is then supported from the back; which leads to the arm connected to the windshield via a heavy duty suction cup....well so far it hasn't fallen off... from there the 2.5 to 3.5 plug converter is around...an inch and half long maybe...the "male" 2.5 end plugs into the xda's "female" jack and at the other end is the "female" plug. the audio input/output connectors are basically similar to your vcr to tv connection; one plugs into the female 3.5 plug (connected to the xda) and the other simply plugs into the car stereo. not complicated at all if you ask me...and you don't really need to have the cradle / holder since you can just leave your unit on one of the shelves under the dash. again, similar to how the ipods are plugged into the car stereo...

ok i have a pretty good idea what it looks like but the problem i have is that my carholder/cradle is blocking the female jack connector so i think im gonna drill out a hole.
i bought me a 2,5 mm jack that i have to solder but the jack itself is too big so now i need an L shaped 2,5mm jack similar to the headphones of the himalaya...
thx for the input m8 (lol) stil a pic would be nice

Connecting phone to a car stereo

Hi all
I have a MDA compact which I wish to connect to my car stereo as a handsfree unit. I have an auxiliary input for my stereo.
Is it possible just to purchase a 2.5 to 3.5mm lead for this? I have a gut feeling the mic won't work - please help? Is it possible to buy such a lead with a built in mic?
Thanks
Carl

Hi, I used to have a XDAII which I connected to the auxillary port on my car stereo, just like you suggest. It worked perfectly. When using the phone, the caller's voice woudl come out of the car speakers and the mic was powerful enough to pick up my voice even though the unit was mounted on my windscreen.
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact. Sorry couldn't offer more advice on your particular device, but I hope my experiences help.

monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.

OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?

carlreader said:
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
Click to expand...
Click to collapse
Yes. 8)

OK - did some work on this.
I decided to cut the earplugs off of the supplied headset, and attach a 3.5mm socket.
I now have a custom XDA mini lead
All works, however volume from car stereo speakers is extremely low. Any ideas? (Yes, I have checked car volume, phone volume and headphone volume!)
Cheers
Carl

jackleung said:
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
Click to expand...
Click to collapse
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.

I found my mic was cancelled with the Mini, hence the custom cable.
hope this helps!

monster said:
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
Click to expand...
Click to collapse
I think my adapter is just a standard 2.5mm to 3.5mm converter. I tried 2 different adapter (one from Radio shack and the other one from ebay: http://cgi.ebay.com/USB-CABLE-headp...ryZ15040QQssPageNameZWD1VQQrdZ1QQcmdZViewItem)
Both are working for me (I will try again today and confirm U tomorrow), therefore I think yr problem is in the exec hardware itself.
To Carl,
Yr setup will not work since yr supplied headset adapter has at least 4 connection on the plug compare to 3 on the standard one. The extra connection is for the mic. If U cut the wire like this:
<---- X --- mic+volumn control ------ ear plugs
Then U can no longer use the mic w/ the custom wire. But if U:
<------- mic+volumn control -- X ---- ear plugs
then the mic on yr mic+volumn control will pick up the voice

hi jackleung
Thanks for the reply - the lead was cut after the mic but before the earphones.
This was because a standard lead with a 2.5 / 3.5mm adaptor didnt work.
My only issue now is the low volume!
Cheers
Carl

I tried it on my Imate Jam again. My mic on the Jam still works (eg: Voice Command via Cyberon Voice Dial. So do phone conversation) even I use my 2.5mm/3.5mm adapter to connection it to my car stereo.

Hi,
I did the same for me and a friend of mine with a Univer..er - Jasjar and connected this to an FM transmitter - We have excellent sound quality, volume and the you can still answer calls by pressing the Mic Button
Frikkie
(If you are gonna be late - dont rush, else someone else and YOU will be cross)

check connections?
I have done exactly what you did, put a 3.5mm socket on the end of the included handsfree cable.. volume is fine, and i regularly connect it to the aux in the car, and multiple sets of headphone/speakers...
The best suggestion to your volume problem is to try again.. i know i had issue with the stereo channels getting screwed up (and even combined at one point) and it was just trial and error getting the connections clean..
You have to ensure that both the shaft and tip connectors on the socket are grounded to the shared ground on the circuit board.. otherwise the audio will probably be less than perfect.. check for dodgy soldering/connection.. coz i can assure you that your theory does work!
Dan

There is another topic on this here.
The person from there uses:
http://www.expansys-usa.com/product.asp?code=PPCPADPT02
which has two 3.5mm plugs.
Description: It has a 2.5mm plug at one end (this plugs into the PocketPC) and two 3.5mm sockets at the other end (into which you plug your 3.5mm headset or headphones).
My question was: could I put a standard 3.5 car kit mic into this 3.5 headset jack (the one with the mic)? Would the mic work if I plug it into a headset jack?
I assume the other one (headphones = stereo only) I will plug it directly into my car auxiliary via a 3.5mm to RCA cable, right?

how to enable microphone while

is there any way to enable build-in microphone while using 2.5mm audio jack connected to car's stereo?any registry edit?Thanks in advance!

I think that the insertion of a jack into the socket operates a hardware switch so I don't think there can be any software tweaks. It is the same as plugging headphones in to a radio etc. the insertion of the jack breaks the connection to the speakers and diverts the output to the headphones.
I got a 2.5mm 4pole male to 3.5mm 3pole female adapter with built in mic and volume control off ebay for less than £5. A cheap 3.5mm patch lead to car stereo later and it works perfectly, other than a slight alternator induced whine is audiable when charging. This is more likely to be from my cheap car charger as it goes when not charging. I like the way MP3s etc get muted when a call comes in. TomTom, Mortplayer and phone calls all at the same time, I love my Wizard.

Guess u didn’t try it. I have my wizard attached with the car stereo and when I get a call i can receive it and talk, the mic gets activated auto. Works perfect for me. Give it a try should work for u.

didn't try what?how does your mic work?

Well I use a 2.5 to 3.5 mm converter which in connected via RC wire to the car stereo linein, when I get a call I just receive it and I can talk. The music stops I can hear the person call and can talk back, the microphone works perfect.

with mine 2.5->3.5 mm jack(done it myself, the 2.5mm jack has 3 poles, not 4) can only hear but the other person doesn,t hear me

my jack has 3 poles, bougth it from ebay some time back, works perfect for me

Connecting to car stereo

Hi
Just after some input on connecting to a car stereo. My thoughts
1) I have read the guide on creating your own mini usb to 3.5mm jack plug cable and have also seen similar things for sale
2) I have seen on a car forum for the car i own a guide for making a cable connecting 3.5mm jack plug to the AUX on the car stereo (used for the cd changer).
3) I can charger my kaiser through a usb cable in the car.
4) There is obviously a power source on the stereo.
Given the above, would it be possible in theory to have a direct connection between the phone usb and the stereo that would allow the phone to play through the stereo and also charge it at the same time?
I dont want to go through the process of doing it if there is some fundamental reason why it cant be done.

this might be wht your looking for hxxp://cgi.ebay.co.uk/3in1-usb-Adapter-for-HTC-KAISER-P4550-TYTN-II-VARIO-III_W0QQitemZ190232228190QQcmdZViewItem?hash=item190232228190&_trkparms=72%3A12%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14

Of course you could. But keep in mind that your microphone won't work for most usb+3.5mm adapter. It's very troublesome to pick up the phone. I would recommend you to opt for BT route. e.g. Stereo bt headset w/ 3.5 mm adapter like Sony Ds-220 or BT head unit like JVC BT-1

Something you might have to research is alternator whine.
I made a lead myself as you described. But as long as the device was charging There would be a buzzing coming from the speakers. This went away when running on battery power and when the device was fully charged.
I also tried a bluetooth device, and again if I tried to use it while it was charging I would get the dreaded buzzing.
I still have not found a solution. FM transmitters have never worked either for me. There is not enough space between channels here.

5manarmy said:
Something you might have to research is alternator whine.
Click to expand...
Click to collapse
You can solve this by installing ground looping isolator if the power source from yr car is not clean

Hi.
I had the same problem, see my solution with the help of others:
http://forum.xda-developers.com/showthread.php?p=2353474
Good luck.

Well I think based on what I have read and the replies on here I am going to give it a go.
I will update on here once completed

I have a bluetooth stereo in my cab and my phone connects to the stereo using the bluetooth, I am also able to use Btmusic and play anything on my phone thru my car stereo its great for the odd file just wish it would do video as well thru bluetooth.
Os

jackleung said:
Of course you could. But keep in mind that your microphone won't work for most usb+3.5mm adapter. It's very troublesome to pick up the phone. I would recommend you to opt for BT route. e.g. Stereo bt headset w/ 3.5 mm adapter like Sony Ds-220 or BT head unit like JVC BT-1
Click to expand...
Click to collapse
The original mic supplied works okay for me with the headphones chopped, but its very echoey even mounted as far from my speakers as possible so would agree with the above.
Ive the same setup in my car. The phone stuff was easy, it was getting the right VAG adapter to fit my cars HU that gave me the most trouble.
I also hardwired in my charging cable to keep it tidier and my cig lighter free, might be worth thinking about.

I have made a start on this. I have wired in the cable from the Car stereo and at the moment this ends with a 3.5mm Jack Plug. I have also bought the YC A200 cable from HTC which allows connection of the 3.5mm jack plug, a wired headset and also mini usb charging. In fact two of the HTC cables were delivered to me (one ordered but 2 delivered and invoiced) so I might use one as a development cable.
So far - music plays through stereo ok, not over impressed with the quality so far but am going to fiddle with the settings. SatNav also plays through the stereo - much easier to hear. I have had an issue this morning when having music playing and satnav running that the GPS signal was being lost. Not sure if this is a problem with running the two things at once or an interference issue from somewhere. I have never had problems with the GPS before. Am going to do a soft reset and try again on the way home tonight.
I was looking at hardwiring the charging cable to tidy things up and free up the lighter socket. I was going to use the 12v feed from the stereo. Is there anything I need to do or be aware of on this?
How does the mic etc work? I know you can use the headset but I would prefer to use the car speakers if possible. We also have a number of old nokia car kits at work which I was thinking of using for the mic. Would the speaker side work if I connected the relevant cables from the headset port on the HTC adaptor to the 3.5mm jack plug connections?

Im just using the mic from the supplied headset, chopped off the cable past the mic/volume slider and mounted it in the car. Call audio comes through the car speakers.
To hardwire the charger in you need step the voltage down from 12v to the needed 5v. I took a live and earth from the back of the stereo, took apart a usb cig charger and soldered the cables into it, put it back together and hid it behind the dash. Then just took a mini usb cable from that up to the 3in1 plugged into the phone.
SRSWOWHD cleaned my sound up considerably using Pocketplayer.

Well, my experiences so far,
Got the HTC YC A200 cable
1) Playing music through car stereo works great
2) GPS works fine most of the time, still not sure what the problem is, mainly voice directions not working properly all the time
3) Charging via the cigarette lighter socket, still got to hard wire the charging
Latest development
Got a Nokia car kit mic, just had to trim the locking lugs off the 2.5mm (or is it 2mm) jack plug. The mic works fine and the caller can hear me ok. The sound comes through the stereo but is not as loud as the music but i can change this slightly by fiddling with the plug, gets louder or quieter but still not the same volume as the music.
Any ideas? Would it be that the HTC adaptor is expecting the htc wired headset?

removing alternator whine / hum
Finally solved the alternator whine / hum over at my place too. Key is to take the power for the charger directly from the power feeding the car stereo. That way both the stereo and charger reference the same ground which eliminated the ground loop and thus the alternator noise.
http://www.jenrathbun.com/phpBB3/viewtopic.php?f=17&t=26&p=76#p76

Microphone only adaptor

Heya,
Currently I have a 3 way splitter HTCusb -> Power (miniusb) | Audio (3.5mm) | HTC Headset Connection (HTCusb)
What I need is a microphone only 'headset' to go in the headset socket, as the audio is allready being passed to my car's speakers via the 3.5 jack.
Does anyone know if/where somthing like this exists? or should i buy a cheap headset and splice the earphones off?
Also anyone else find the fuze is unable to gain positive charge whilst on and connected to a 12v ciggaret adaptor, it still drains but at a slower rate, but I do not have an offical charger, which may be the problem.

+1
I also have my audio sent to my car speakers. But since the phone thinks I have a headset attached, the phone microphone is disabled. So when it rings, I have to undock it from the cradle and stick it to my ear. I'd love to have just a microphone mounted near the visor. Anyone know where I can find one?

Wouldn't this do as a workaround?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=169481
Plug into the HTC headset connection on your adapter, then you have a micropohone. Then plug the 3.5 jack into the end (instead of the headphones)

The large block adapter that came in the box works for me and allows me to use my car speakers w/ aux input and there is no problems with the microphone.
I had this problem with my tilt with the Y splitter adapter, however the multi adapter that comes in the fuze box works for me perfectly.

http://cgi.ebay.de/Audio-Adapter-3-...14&_trkparms=72:1229|66:2|65:12|39:1|240:1318
There will be the same offers on ebay in your country. Searchwords: HTC 3,5mm