Hi all
I have a MDA compact which I wish to connect to my car stereo as a handsfree unit. I have an auxiliary input for my stereo.
Is it possible just to purchase a 2.5 to 3.5mm lead for this? I have a gut feeling the mic won't work - please help? Is it possible to buy such a lead with a built in mic?
Thanks
Carl
Hi, I used to have a XDAII which I connected to the auxillary port on my car stereo, just like you suggest. It worked perfectly. When using the phone, the caller's voice woudl come out of the car speakers and the mic was powerful enough to pick up my voice even though the unit was mounted on my windscreen.
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact. Sorry couldn't offer more advice on your particular device, but I hope my experiences help.
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
carlreader said:
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
Click to expand...
Click to collapse
Yes. 8)
OK - did some work on this.
I decided to cut the earplugs off of the supplied headset, and attach a 3.5mm socket.
I now have a custom XDA mini lead
All works, however volume from car stereo speakers is extremely low. Any ideas? (Yes, I have checked car volume, phone volume and headphone volume!)
Cheers
Carl
jackleung said:
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
Click to expand...
Click to collapse
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
I found my mic was cancelled with the Mini, hence the custom cable.
hope this helps!
monster said:
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
Click to expand...
Click to collapse
I think my adapter is just a standard 2.5mm to 3.5mm converter. I tried 2 different adapter (one from Radio shack and the other one from ebay: http://cgi.ebay.com/USB-CABLE-headp...ryZ15040QQssPageNameZWD1VQQrdZ1QQcmdZViewItem)
Both are working for me (I will try again today and confirm U tomorrow), therefore I think yr problem is in the exec hardware itself.
To Carl,
Yr setup will not work since yr supplied headset adapter has at least 4 connection on the plug compare to 3 on the standard one. The extra connection is for the mic. If U cut the wire like this:
<---- X --- mic+volumn control ------ ear plugs
Then U can no longer use the mic w/ the custom wire. But if U:
<------- mic+volumn control -- X ---- ear plugs
then the mic on yr mic+volumn control will pick up the voice
hi jackleung
Thanks for the reply - the lead was cut after the mic but before the earphones.
This was because a standard lead with a 2.5 / 3.5mm adaptor didnt work.
My only issue now is the low volume!
Cheers
Carl
I tried it on my Imate Jam again. My mic on the Jam still works (eg: Voice Command via Cyberon Voice Dial. So do phone conversation) even I use my 2.5mm/3.5mm adapter to connection it to my car stereo.
Hi,
I did the same for me and a friend of mine with a Univer..er - Jasjar and connected this to an FM transmitter - We have excellent sound quality, volume and the you can still answer calls by pressing the Mic Button
Frikkie
(If you are gonna be late - dont rush, else someone else and YOU will be cross)
check connections?
I have done exactly what you did, put a 3.5mm socket on the end of the included handsfree cable.. volume is fine, and i regularly connect it to the aux in the car, and multiple sets of headphone/speakers...
The best suggestion to your volume problem is to try again.. i know i had issue with the stereo channels getting screwed up (and even combined at one point) and it was just trial and error getting the connections clean..
You have to ensure that both the shaft and tip connectors on the socket are grounded to the shared ground on the circuit board.. otherwise the audio will probably be less than perfect.. check for dodgy soldering/connection.. coz i can assure you that your theory does work!
Dan
There is another topic on this here.
The person from there uses:
http://www.expansys-usa.com/product.asp?code=PPCPADPT02
which has two 3.5mm plugs.
Description: It has a 2.5mm plug at one end (this plugs into the PocketPC) and two 3.5mm sockets at the other end (into which you plug your 3.5mm headset or headphones).
My question was: could I put a standard 3.5 car kit mic into this 3.5 headset jack (the one with the mic)? Would the mic work if I plug it into a headset jack?
I assume the other one (headphones = stereo only) I will plug it directly into my car auxiliary via a 3.5mm to RCA cable, right?
Related
Hey,
I have a question regarding the XDA II.
When I'm getting the device I would like to get it connected in my car.
Is it possible to connect the XDA II to an amplifier and play my mp3's?
I know there are a few amplifiers out there that can be connected with a "walkman" jack.
If is possible could you put some pics online where I can check it out?
Thanks a lot!
Cheers
Panja
if you dont want to get a car tuner which neat jackconnectors
and you have a tape player in the car then
http://www.digitalnetworksna.com/shop/_templates/item_accessories.asp?model=69&cat=16
this one or one like it would work if you made or got a xda 2.5 to 3.5 converter
First of all: thanks for the amazing fast reply!! :-D
I don't have a tape player in my car... So this is not an option for me...
I can buy an amplifier that can be connected with a "walkman" jack.
I had one a long time ago, I connected my walkman to the amplifier.
So is there a cable that can be connected to the XDA II and the other side that has a "walkman" jack? (So I can put this in the amplifier)?
And will this work for the XDA II?
Cheers
http://www.expansys.com/product.asp?code=PPCPADPT01
xda1 and 2 have compatible connectors apart from the pickup phone buttons
w00t!!
That's what I'm looking for man!
Thanks again, going to order that one as soon as my XDA II is in my hands :-D
Does anyone in here own such a cable?
Just want to know if the quality is any good...
If it's worth the money.
The cable itself is not that expensive but I would have to buy an amplifier too.
Don't care about the money as long as it works great :-D
Cheers
Also I would like to know when connected with the cable does the microfone still work? (so when the cable is inserted)
Because I will be using MS Voice software...
Thanks
if it does disable the mic in the xda then this
http://pc-mobile.net/pxdaa.htm
would work it have a mic aswell and a 3.5mm connector
of cause then you would have to place it in a place where
it can recieve your voice
about sound quality then should not be much worse then the headset
it's just another connector with the jack 3.5mm
it's just analog you can compare it with how much the quality loss would be if a walkmen were connected the same way compared to connected to a headset
Thanks man!!
Just a question regarding the cable with mic.
If I will use it in the car with the sound (mp3) over my speakers won't that interfere with my microphone (with ms voice software)...?
Hi just thought this idea might help:
if you have a look around the net (i think Expansys.co.uk also do one) you can get a little radio module that plugs into a standard stereo jack, it transmits your audio to a special frequency that can be picked up by any FM radio nearby. Like you car radio if you have one.
I use my XDA II as an MP3 player in my car via Seidio's iSound wireless FM transmitter. The transmitter input plugs into the XDA2's headphone jack (I have a 2.5 to 3.5 mm adaptor) and then I tune my car stereo into the user definable frequency of the iSound transmitter. Works very well.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=SFTF1
This sounds very very interesting guys!!
Thanks a lot.
This is a lot more userfriendly than putting an amplifer and stuff in.
I have a nice car audio so this is very neat!!
How is the sound quality?!
Cheers
So how is the sound quality?
Before I'm buying this one I would like to know if the sound quality is good.
I got the expansys adapter but it works very poorly for the XDAII dues to the unusual shape of the 2.5 socket on the XDAII. I have to fiddle with the plug to get it to work... very annoying.
Anyone found an adapter without this problem?
josephwaller said:
I got the expansys adapter but it works very poorly for the XDAII dues to the unusual shape of the 2.5 socket on the XDAII. I have to fiddle with the plug to get it to work... very annoying.
Anyone found an adapter without this problem?
Click to expand...
Click to collapse
Yes, with another adapter i had the same problem.
Buy on old Nokia 8110 headet, cut it below the mic and use the wires to solder a 3,5mm connector to it, On the nokia wire :
blue = Audio-L
Green = Audio-R
Red = Mic
Blanc = Ground
Good luck !
i have the following problem: when i plug my wizard to my car stereo via 2.5mm stereojack cable the build-in mic stops working so i can't talk using the cars stereo...is there any reg-edit or program that can allow the built-in mic to work while the cable (or any handsfree) is inserted? i read somewhere that there were people that have their cables plug but still the mic is running...can you tell me if your jack has 3 poles or 4 poles? thanks in advance!
help please [;
i'd rather say it's a hardware problem. in most headset jack sockets i've encountered it's done by a jack plug simply unpluggin' built in speaker/mic due to the design of the socket. of course i may be wrong, nut i'd say registry has nothing to it...
i think as you do, but someone mentioned on another post that he puts the cable and the built in mic continues to work.
Hi
Just after some input on connecting to a car stereo. My thoughts
1) I have read the guide on creating your own mini usb to 3.5mm jack plug cable and have also seen similar things for sale
2) I have seen on a car forum for the car i own a guide for making a cable connecting 3.5mm jack plug to the AUX on the car stereo (used for the cd changer).
3) I can charger my kaiser through a usb cable in the car.
4) There is obviously a power source on the stereo.
Given the above, would it be possible in theory to have a direct connection between the phone usb and the stereo that would allow the phone to play through the stereo and also charge it at the same time?
I dont want to go through the process of doing it if there is some fundamental reason why it cant be done.
this might be wht your looking for hxxp://cgi.ebay.co.uk/3in1-usb-Adapter-for-HTC-KAISER-P4550-TYTN-II-VARIO-III_W0QQitemZ190232228190QQcmdZViewItem?hash=item190232228190&_trkparms=72%3A12%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14
Of course you could. But keep in mind that your microphone won't work for most usb+3.5mm adapter. It's very troublesome to pick up the phone. I would recommend you to opt for BT route. e.g. Stereo bt headset w/ 3.5 mm adapter like Sony Ds-220 or BT head unit like JVC BT-1
Something you might have to research is alternator whine.
I made a lead myself as you described. But as long as the device was charging There would be a buzzing coming from the speakers. This went away when running on battery power and when the device was fully charged.
I also tried a bluetooth device, and again if I tried to use it while it was charging I would get the dreaded buzzing.
I still have not found a solution. FM transmitters have never worked either for me. There is not enough space between channels here.
5manarmy said:
Something you might have to research is alternator whine.
Click to expand...
Click to collapse
You can solve this by installing ground looping isolator if the power source from yr car is not clean
Hi.
I had the same problem, see my solution with the help of others:
http://forum.xda-developers.com/showthread.php?p=2353474
Good luck.
Well I think based on what I have read and the replies on here I am going to give it a go.
I will update on here once completed
I have a bluetooth stereo in my cab and my phone connects to the stereo using the bluetooth, I am also able to use Btmusic and play anything on my phone thru my car stereo its great for the odd file just wish it would do video as well thru bluetooth.
Os
jackleung said:
Of course you could. But keep in mind that your microphone won't work for most usb+3.5mm adapter. It's very troublesome to pick up the phone. I would recommend you to opt for BT route. e.g. Stereo bt headset w/ 3.5 mm adapter like Sony Ds-220 or BT head unit like JVC BT-1
Click to expand...
Click to collapse
The original mic supplied works okay for me with the headphones chopped, but its very echoey even mounted as far from my speakers as possible so would agree with the above.
Ive the same setup in my car. The phone stuff was easy, it was getting the right VAG adapter to fit my cars HU that gave me the most trouble.
I also hardwired in my charging cable to keep it tidier and my cig lighter free, might be worth thinking about.
I have made a start on this. I have wired in the cable from the Car stereo and at the moment this ends with a 3.5mm Jack Plug. I have also bought the YC A200 cable from HTC which allows connection of the 3.5mm jack plug, a wired headset and also mini usb charging. In fact two of the HTC cables were delivered to me (one ordered but 2 delivered and invoiced) so I might use one as a development cable.
So far - music plays through stereo ok, not over impressed with the quality so far but am going to fiddle with the settings. SatNav also plays through the stereo - much easier to hear. I have had an issue this morning when having music playing and satnav running that the GPS signal was being lost. Not sure if this is a problem with running the two things at once or an interference issue from somewhere. I have never had problems with the GPS before. Am going to do a soft reset and try again on the way home tonight.
I was looking at hardwiring the charging cable to tidy things up and free up the lighter socket. I was going to use the 12v feed from the stereo. Is there anything I need to do or be aware of on this?
How does the mic etc work? I know you can use the headset but I would prefer to use the car speakers if possible. We also have a number of old nokia car kits at work which I was thinking of using for the mic. Would the speaker side work if I connected the relevant cables from the headset port on the HTC adaptor to the 3.5mm jack plug connections?
Im just using the mic from the supplied headset, chopped off the cable past the mic/volume slider and mounted it in the car. Call audio comes through the car speakers.
To hardwire the charger in you need step the voltage down from 12v to the needed 5v. I took a live and earth from the back of the stereo, took apart a usb cig charger and soldered the cables into it, put it back together and hid it behind the dash. Then just took a mini usb cable from that up to the 3in1 plugged into the phone.
SRSWOWHD cleaned my sound up considerably using Pocketplayer.
Well, my experiences so far,
Got the HTC YC A200 cable
1) Playing music through car stereo works great
2) GPS works fine most of the time, still not sure what the problem is, mainly voice directions not working properly all the time
3) Charging via the cigarette lighter socket, still got to hard wire the charging
Latest development
Got a Nokia car kit mic, just had to trim the locking lugs off the 2.5mm (or is it 2mm) jack plug. The mic works fine and the caller can hear me ok. The sound comes through the stereo but is not as loud as the music but i can change this slightly by fiddling with the plug, gets louder or quieter but still not the same volume as the music.
Any ideas? Would it be that the HTC adaptor is expecting the htc wired headset?
removing alternator whine / hum
Finally solved the alternator whine / hum over at my place too. Key is to take the power for the charger directly from the power feeding the car stereo. That way both the stereo and charger reference the same ground which eliminated the ground loop and thus the alternator noise.
http://www.jenrathbun.com/phpBB3/viewtopic.php?f=17&t=26&p=76#p76
Heya,
Currently I have a 3 way splitter HTCusb -> Power (miniusb) | Audio (3.5mm) | HTC Headset Connection (HTCusb)
What I need is a microphone only 'headset' to go in the headset socket, as the audio is allready being passed to my car's speakers via the 3.5 jack.
Does anyone know if/where somthing like this exists? or should i buy a cheap headset and splice the earphones off?
Also anyone else find the fuze is unable to gain positive charge whilst on and connected to a 12v ciggaret adaptor, it still drains but at a slower rate, but I do not have an offical charger, which may be the problem.
+1
I also have my audio sent to my car speakers. But since the phone thinks I have a headset attached, the phone microphone is disabled. So when it rings, I have to undock it from the cradle and stick it to my ear. I'd love to have just a microphone mounted near the visor. Anyone know where I can find one?
Wouldn't this do as a workaround?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=169481
Plug into the HTC headset connection on your adapter, then you have a micropohone. Then plug the 3.5 jack into the end (instead of the headphones)
The large block adapter that came in the box works for me and allows me to use my car speakers w/ aux input and there is no problems with the microphone.
I had this problem with my tilt with the Y splitter adapter, however the multi adapter that comes in the fuze box works for me perfectly.
http://cgi.ebay.de/Audio-Adapter-3-...14&_trkparms=72:1229|66:2|65:12|39:1|240:1318
There will be the same offers on ebay in your country. Searchwords: HTC 3,5mm
Hi everyone,
I'm wondering if it's possible to have built-in mic active when a cable is plugged into the 3.5 mmjack. For example...I connect the hd2 to the car stereo and if I get a call i need to disconnect the cable because the built-in mic is inactive.
venz111 said:
Hi everyone,
I'm wondering if it's possible to have built-in mic active when a cable is plugged into the 3.5 mmjack. For example...I connect the hd2 to the car stereo and if I get a call i need to disconnect the cable because the built-in mic is inactive.
Click to expand...
Click to collapse
Mine works when I plug mine into my car with a standard 3.5mm stereo cable.
Does the cable you're using have 1 or 2 black stripes on the plug?
i agree, this feature was one of the most pleasant surprises for me with the HD2.
on my kaiser, i used a special HTC headset that had an inline microphone (which i snapped on to my shirt collar) and this headset allowed me to plug in a standard 3.5mm stereo jack, which my car audio was plugged in to. this was the best solution at the time for the kaiser that allowed me to keep all cables connected and be able to use the car's speakers and have a working microphone all at once.
but with the HD2...WOW!!! i plugged in my car stereo's 3.5mm stereo jack straight into the HD2 and put on some music and started driving. a call came in while driving and i just pressed answer because i was still used to my kaiser set up (i had owned the HD2 for less than 24 hours at this point so wasn't quite used to it yet).
i started hearing the other party and i started speaking. and the other party could hear me. and THEN it hit me...i was like, holy hell!!!...what am i speaking in to? how come the other party can hear me?
great features, great phone!
rp-x1 said:
Mine works when I plug mine into my car with a standard 3.5mm stereo cable.
Does the cable you're using have 1 or 2 black stripes on the plug?
Click to expand...
Click to collapse
I think it has two stripes since it's a stereo jack. I'm not sure but i think initialy I was able to speak in the car with the leo plugged into the stereo. May be some app I've installed later changed something?!?
the built in mic will stay active unless u have a cable with 4 connections (3 rings on the plug), a regular stereo cable has 2 rings. I've been using this type of setup for a couple of years with my previous phone, a.k.a. iphone. The mic is pretty sensitive and can pick up your voice rather well. I have my hd2 clipped to my sunvisor for easy access and routed the wiring inside the windshield molding down under the dashboard to the stereo and it works pretty good.
http://www.youtube.com/watch?v=osLFRLL7qOw