is there any way to enable build-in microphone while using 2.5mm audio jack connected to car's stereo?any registry edit?Thanks in advance!
I think that the insertion of a jack into the socket operates a hardware switch so I don't think there can be any software tweaks. It is the same as plugging headphones in to a radio etc. the insertion of the jack breaks the connection to the speakers and diverts the output to the headphones.
I got a 2.5mm 4pole male to 3.5mm 3pole female adapter with built in mic and volume control off ebay for less than £5. A cheap 3.5mm patch lead to car stereo later and it works perfectly, other than a slight alternator induced whine is audiable when charging. This is more likely to be from my cheap car charger as it goes when not charging. I like the way MP3s etc get muted when a call comes in. TomTom, Mortplayer and phone calls all at the same time, I love my Wizard.
Guess u didn’t try it. I have my wizard attached with the car stereo and when I get a call i can receive it and talk, the mic gets activated auto. Works perfect for me. Give it a try should work for u.
didn't try what?how does your mic work?
Well I use a 2.5 to 3.5 mm converter which in connected via RC wire to the car stereo linein, when I get a call I just receive it and I can talk. The music stops I can hear the person call and can talk back, the microphone works perfect.
with mine 2.5->3.5 mm jack(done it myself, the 2.5mm jack has 3 poles, not 4) can only hear but the other person doesn,t hear me
my jack has 3 poles, bougth it from ebay some time back, works perfect for me
Related
Hi,
I have connected my KJam to my car stereo via a cable from the 2.5mm jack to the aux port of my car stereo. Tom Tom voice and phone calls are routed through my car stereo. Sometimes, the microphone will not work when I take a call. I can hear the caller perfectly but they can't hear me. Other times, the phone functionality works perfectly and we can both hear each other great.
If anyone can suggest any ideas, I would be very grateful.
Thanks
if your using a jack to connect it to your car, then its will prob. stop the mic working as its routing the audio to you car in the same way the headset with mic that you got with the k-jam does. I had this problem on mine, but due to the fact that i use a bluetooth neadset in the car fixed that little problem 8)
That's the end of my k-jam desires then.
I use my MDA compact in the same way you describe, for TomTom, Hands free calling and to play my music through.... and my microphone works fine with the headphone jack in.
I guess one thing to check would be the number of rings on your 2.5mm jack. If you have 3 then theres a possibility the k-jam thinks you have a mic on the end of the wire. If you have 2 rings (normal stereo headphones) then there must be another issue somewhere.
thanks for your replies. My concern was around the fact that sometimes the microphone works and sometimes not. I wonder if there is a workaround or a specific type of cable that I need to ensure that only the audio is routed and not the mic as well.
Thanks for all your help.l
never tried this myself, so i can only assume it would work. you could hack a cheap wired headset up, removing the earpieces but leaving the microphone. then add a stereo 3.5 plug so you can hook it up to your car stereo.
SpeedN
I have that very problem also, it's gotten that annoying that i've stopped using it through my stereo. you are able to get around it by popping the cable out of the kjam, then putting it back in.
pain in the ass though none the less.
What is the phone is set to Speakerphone ?
Even though Speakerphone is currently not working...
Hey all,
Just wondering if anyone has had any success in fixing this problem? I am having the same issue. I have a 2 ring 2.5-3.5mm adapter connected (so it should only be routing the audio, not the mic) and sometimes the caller can hear me, sometimes not. At one stage I found by unplugging the cable, setting to speakerphone, then unsetting speakerphone and plugging the cable back in would get it to work, but not anymore...
Any ideas?!?! I love my XDAII mini but this is driving me up the wall!
Cheers,
jlitjens
Is there any way to get the speaker phone active when 3.5mm audio jack is connected? I use an FMtransmitter connected to the 3.5mm to get the sound out in my car speakers, works fine with music and tomtom sound... but when i get a phone call i would like to answer with speaker phone preferable with the sound still from my car speakers, but with the phone mic activated.
It seams like the phone mic is deactivated when 3.5mm is connected.
/ToKeN
2token2 said:
Is there any way to get the speaker phone active when 3.5mm audio jack is connected?
Click to expand...
Click to collapse
I don't know the answer to that specific question, but...
I have a very similar set up to you (though the 3.5mm jack runs directly to my car stereo), using PocketMusic and TomTom.
The in-built mic is active in this case - If I get an incoming call, or make an outgoing call, the audio out is routed through my car stereo (i.e. I hear the other person over the car speakers). The mic still picks up my voice and I can have a conversion. I'm using a regular 3.5mm->double RCA lead (i.e. there is no mic present on the audio jack).
One of the features I miss of my Hero that my Nokia N95-8GB had was the ability to plug in a standard pair of headphones (or 3.5mm audio out cable) and use the built in microphone to make hands free calls.
I use the phone a lot in my car whilst driving to and from work to listen to music and would love for it to recognise the standard cable (which it does - indicated by a pair of headphones rather than the headphones/mic icon used to indicate the presence of the hands-free headphones) and be able to automatically answer inbound calls using the internal microphone.
Is there an app for this kind of thing - I'm guessing it is something that is/can be controlled by software?
have you tried it actually? because i use my ipod headphones quite often and it works as expected, sound from headphones and i hold phone closely to my mouth as its using internal mic.
Really not sure what you are looking for. If you plug the standard HTC headphones in using the jack on the top then you can use of the built in mike they have to answer calls.
Or have I missed something?
I've also done exactly what you're asking with my car. I've had my phone in a car holder w/ an audio cable from the Hero's headphone jack to my car's line in jack. I was able to answer calls just fine, and the person on the other end could hear me. (And it was just a standard stereo audio cable, my car doesn't have any sort of built in mic)
bjg222 said:
I've also done exactly what you're asking with my car. I've had my phone in a car holder w/ an audio cable from the Hero's headphone jack to my car's line in jack. I was able to answer calls just fine, and the person on the other end could hear me. (And it was just a standard stereo audio cable, my car doesn't have any sort of built in mic)
Click to expand...
Click to collapse
im doing the same thing but people on the other end are complaining about an echo of thir voice. I figure its coming from thier voice being picked up by the internal mic. Anybody have any ideas? how can i cut the internal mic while theyare talking. would a cheap wired headset work using its external mic? i could cut the headphones off and splice it into the line in.
I have had my G2 since late September and quickly found out by accident that it does use the internal mic when a headphone is plugged in.
Mine is a simple adaptor from the 3.5 mm into the RCA in my car. If I have the volume up too high, it echoes. If I have the volume down low, I can have a perfect handsfree conversation.
With the headphones I have had problems. In the car, I have the phone laying down and the mic side up. If I am holding the phone in my hand, I have no problems. Shirt pocket, ok. Pants pocket, no way.
Hi everyone,
I'm wondering if it's possible to have built-in mic active when a cable is plugged into the 3.5 mmjack. For example...I connect the hd2 to the car stereo and if I get a call i need to disconnect the cable because the built-in mic is inactive.
venz111 said:
Hi everyone,
I'm wondering if it's possible to have built-in mic active when a cable is plugged into the 3.5 mmjack. For example...I connect the hd2 to the car stereo and if I get a call i need to disconnect the cable because the built-in mic is inactive.
Click to expand...
Click to collapse
Mine works when I plug mine into my car with a standard 3.5mm stereo cable.
Does the cable you're using have 1 or 2 black stripes on the plug?
i agree, this feature was one of the most pleasant surprises for me with the HD2.
on my kaiser, i used a special HTC headset that had an inline microphone (which i snapped on to my shirt collar) and this headset allowed me to plug in a standard 3.5mm stereo jack, which my car audio was plugged in to. this was the best solution at the time for the kaiser that allowed me to keep all cables connected and be able to use the car's speakers and have a working microphone all at once.
but with the HD2...WOW!!! i plugged in my car stereo's 3.5mm stereo jack straight into the HD2 and put on some music and started driving. a call came in while driving and i just pressed answer because i was still used to my kaiser set up (i had owned the HD2 for less than 24 hours at this point so wasn't quite used to it yet).
i started hearing the other party and i started speaking. and the other party could hear me. and THEN it hit me...i was like, holy hell!!!...what am i speaking in to? how come the other party can hear me?
great features, great phone!
rp-x1 said:
Mine works when I plug mine into my car with a standard 3.5mm stereo cable.
Does the cable you're using have 1 or 2 black stripes on the plug?
Click to expand...
Click to collapse
I think it has two stripes since it's a stereo jack. I'm not sure but i think initialy I was able to speak in the car with the leo plugged into the stereo. May be some app I've installed later changed something?!?
the built in mic will stay active unless u have a cable with 4 connections (3 rings on the plug), a regular stereo cable has 2 rings. I've been using this type of setup for a couple of years with my previous phone, a.k.a. iphone. The mic is pretty sensitive and can pick up your voice rather well. I have my hd2 clipped to my sunvisor for easy access and routed the wiring inside the windshield molding down under the dashboard to the stereo and it works pretty good.
http://www.youtube.com/watch?v=osLFRLL7qOw
I am interested in purchasing this phone, but I read there is an issue with not being able to use the microphone while headphones are plugged in. I hook my current Android into my car stereo through my headphone jack and when people call, it uses the speaker phone to talk while I hear people on the car stereo. Would I still be able to do this on the Fascinate, or does that also disable the speaker phone mic, or are they the same mic?
im not sure what you are asking but i ahve no problems with it, i plug in my headphones with the mic in them and they work great, use them for listening to music and talking and love it
He means he has his phone plugged into the speakers in his car through the aux jack, and then when he gets a call he uses the speakerphone option to talk, and incoming voice audio plays on his car stereo. I do not think this will currently work on the fascinate...
You've heard right. It blocks speakerphone when headphones/aux are plugged in. It's quite a pain considering I use it as my music player in the car. It also ignores bluetooth while plugged in as well.
I got used to unplugging it when I get a call, though.
This is correct, and was almost a deal breaker for me. However, the car dock has a function where you don't need to plug in the AUX, only the micro-USB, and you can charge it as well as have audio output (the audio goes through the charging port, then is output by a 3.5mm output on the dock, and finally to your car's AUX in). This feature isn't enabled yet, but once Froyo is released it will be - and then we should be able to take calls over our car speakers without the mic being muted.
Just something to keep in mind,
indypacer said:
This is correct, and was almost a deal breaker for me. However, the car dock has a function where you don't need to plug in the AUX, only the micro-USB, and you can charge it as well as have audio output (the audio goes through the charging port, then is output by a 3.5mm output on the dock, and finally to your car's AUX in). This feature isn't enabled yet, but once Froyo is released it will be - and then we should be able to take calls over our car speakers without the mic being muted.
Just something to keep in mind,
Click to expand...
Click to collapse
So Indy, we can't use the car dock the way it was intended until froyo drops? That means I can't hear my nav thru the speakers while docked or any music?
Sent from my Fascinate
As I understand it, yes. There is a sticker on the port letting you know that it won't function properly until the release of 2.2. I'm still waiting on my dock to get here in the mail, but I've seen several threads elsewhere where this is discussed.
I don't think the dock has room, but if it does, you could still run an AUX cable from the headphone jack to your car's input, and have nav and music through the speakers - you just wouldn't be able to take calls with it connected because of the mic being muted with an AUX cable connected. Once 2.2 is released, as I understand, you'll be able to do it all.
Thanks for the help. It looks like ill be waiting before I make a purchase. I use slacker radio too much in my car and my deck doesn't have an auxiliary in, its old school tape deck so I have a device that plugs in the tape deck.