I wanted to install italian artemis rom...and i downloaded HSPL2 and task29 provided and i installed them...but now my hd2 don't switch on....it doenst work...please someone helps me.....give me a help...what should I do to have my old hd2?
when you say it does not switch on what does exactly happens?
The screen stays black dead or it gets stuck on the white htc screen?
johcos said:
when you say it does not switch on what does exactly happens?
The screen stays black dead or it gets stuck on the white htc screen?
Click to expand...
Click to collapse
it's all black....it's died.....
ChriGothiMark said:
it's all black....it's died.....
Click to expand...
Click to collapse
Try to take out the battery and disconnect it from everything for around 10 min and then put the battery back on and try again.
Can you expain the procedure you followed to install HSPL and task29?
heyyyy...now it's white...with htc logo...but it doesn't start...
johcos said:
Try to take out the battery and disconnect it from everything for around 10 min and then put the battery back on and try again.
Can you expain the procedure you followed to install HSPL and task29?
Click to expand...
Click to collapse
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee
ChriGothiMark said:
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee
Click to expand...
Click to collapse
So you have installed hspl and then run Task29? Have you installed the Artemis rom after that? Task29 clears the entire memory of any rom so it will get stuck as there is no rom to boot into.
ChriGothiMark said:
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee
Click to expand...
Click to collapse
Copy in the root of your SD card the artemis nbh renaming it to leoimg.nbh.
Enter boot loader by pressing voldown and pressing the power key if you have it powered off or voldown and reset behind the back cover if its on the white screen and follow the instructions.
first make sure you have hspl install. can you bring your device to the tricolor screen? hold vol down button and power up.
johcos said:
Copy in the root of your SD card the artemis nbh renaming it to leoimg.nbh.
Enter boot loader by pressing voldown and pressing the power key if you have it powered off or voldown and reset behind the back cover if its on the white screen and follow the instructions.
Click to expand...
Click to collapse
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
tell us what you see... what's your spl version?
ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
make sure you have renamed the file to leoimg.nbh and you have HSPL installed.
then try to enter again the tricolor screen but the minute you see it release the voldown key and a grey screen sould appear telling you to press power button to update the rom
gianton said:
tell us what you see... what's your spl version?
Click to expand...
Click to collapse
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white
ChriGothiMark said:
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white
Click to expand...
Click to collapse
ok now connect your device to usb and flash radio 2.07.51_22 (you can find it in artemis thread).
then bring your device again to the tricolor screen and flash artemis v17 the same way.
then hard reset and you are done!
ChriGothiMark said:
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white
Click to expand...
Click to collapse
if you can't manage to get to the grey screen extract the attached file and put it with the artemis nbh file in the same folder in your pc and run it leaving your phone in the screen that says USB and follow the on screen instuctions
it's advised to read 1st this tutorial http://forum.xda-developers.com/showthread.php?t=609477
ok.....i think the rom is istalling......) hope hope hope...
gianton said:
it's advised to read 1st this tutorial http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
Yes you will find all the info you need in there.
PS: Don't worry your HD2 is ok.
thxxxxxxx buddiessss.....u saved my life.....God bless you so much...
ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
THEN . . .
1. connect to pc via usb
2. flash the ROM of your choice (double click on the Custom_RUU that
the ROM came with.
Related
I've tried to downgrade my HD2 from 3.14 to 1.66 from SD with leoimg.nbh
But I was wrong and I pressed powerButton instead of pressing volDown.
The result is:
00028002
Not allow
Then because the SPL is changed to 1.42, I've try to reflash 3.14, but the situation now is:
Now in bootloader I have
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
Someone can help me please?
thanks a lot!!
Now if I flash an original ROM I recieved VENDOR ID NOT ALLOWED
Sorry for my poor english...
So you haven't got hspl?
Try holding down both volume up and down and power button that'll do a hard reset
Sent from my HTC HD2 using Tapatalk
Restart the SD Card flashing again with the 1.66 ROM.
Eyy i got some other problem,
when i flashed to SPL-2.08.0000 8G XE
the stock rom didnt start after i flashed it,
i had white screen, then i tried to install radio 2.15.50.14 it gets stuck at 96% and i get ''96%!!'' and now nothings works...
some one any advice? or shall i start a new topic?
Thnx
luca_v3r said:
....
Now if I flash an original ROM I recieved VENDOR ID NOT ALLOWED
Sorry for my poor english...
Click to expand...
Click to collapse
Download the ROM from HTC's website, using your phone's serial number. It may be a stock ROM or one with the telephone company's name on it. You will not be allowed to download one which is not allowed on your phone.
So you haven't got hspl?
Try holding down both volume up and down and power button that'll do a hard reset
Click to expand...
Click to collapse
Now I don't have hspl , hard reset when i press VolUp for restore nothing happened ..
Restart the SD Card flashing again with the 1.66 ROM.
Click to expand...
Click to collapse
The response is not allowed..
pokerfreakje said:
Eyy i got some other problem,
when i flashed to SPL-2.08.0000 8G XE
the stock rom didnt start after i flashed it,
i had white screen, then i tried to install radio 2.15.50.14 it gets stuck at 96% and i get ''96%!!'' and now nothings works...
some one any advice? or shall i start a new topic?
Thnx
Click to expand...
Click to collapse
Download the ROM from HTC's website, using your phone's serial number. It may be a stock ROM or one with the telephone company's name on it. You will not be allowed to download one which is not allowed on your phone.
With the phone off, press and hold the Volume Down button then tap the Power button. You should now be in BootLoader mode.
Connect to your PC and the 'Serial' on the phone should change to 'USB'.
Now you can run the downloaded ROM. Please be patient, sometimes it can sit at 0% or 99% for a good five minutes.
Can i flash it to a android NAND, without a WM Rom? and with a radio 2.05?
You need at least 2.08 Radio. Also, you need HSPL and a Winmo rom to start the MAGLDR install.
Thanks thanks thanks thanks thanks thanks thanks
a lot of ALL!!!!!!
My error is that I try to flash a original ITALIAN rom, but my HD2 is from DE......
I'm very stupid...
Thanks ALL
You need to replace spl with hspl before flashing custom roms
Sent from my HTC HD2 using Tapatalk
when i remove my battery and put it back and it shows these word in tri-color screen (red,green,blue)
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
is anyone can help me?
S/N:HT03LNW00371
Made In Taiwan
HTC HD2 T8585 (WWE) PDA-GADGETS
I'm a malaysian..
hey, how did you manage to delete your rom?
Have you tried going to htc.com and downloading the latest official rom for your device?
[edit] FYI, that tri-colour screen is the bootloader [/edit]
garylaw said:
when i remove my battery and put it back and it shows these word in tri-color screen (red,green,blue)
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
is anyone can help me?
S/N:HT03LNW00371
Made In Taiwan
HTC HD2 T8585 (WWE) PDA-GADGETS
I'm a malaysian..
Click to expand...
Click to collapse
The only way to delete the rom is using task 29.
If you didnt do it, you still can go back to your rom.
Try hard reset your phone.
Turn off the phone. Then press the VOLUME DOWN and VOLUME UP BUTTONS at the same time. While pressing, you now also press the POWER ON BUTTON.
You will go to the white screen and you can follow the on screen instruction.
But remember that this hard reset will restore your phone to factory setting, therefore your data and application will be lost.
Good luck
jwchips said:
hey, how did you manage to delete your rom?
Have you tried going to htc.com and downloading the latest official rom for your device?
[edit] FYI, that tri-colour screen is the bootloader [/edit]
Click to expand...
Click to collapse
not suitable for my device and thanks for trying to help me..
silverwind said:
The only way to delete the rom is using task 29.
If you didnt do it, you still can go back to your rom.
Try hard reset your phone.
Turn off the phone. Then press the VOLUME DOWN and VOLUME UP BUTTONS at the same time. While pressing, you now also press the POWER ON BUTTON.
You will go to the white screen and you can follow the on screen instruction.
But remember that this hard reset will restore your phone to factory setting, therefore your data and application will be lost.
Good luck
Click to expand...
Click to collapse
i try your way and when it says press VolUp to boot and i press the VolUp it will automatically restart the phone and my screen turn back to the tri-color screen again..thanks for trying to help me doesn't works for me..
No rom, . ROM is built-in.
No ROM you will NOT able to see tri-color
Maybe you bricked your phone
you need to flash stock ROM.
Find your shipped ROM in the HD2 Stock ROM thread for your carrier and try to flash via SD, this will handled whatever problem you ran into and is easier than trying to pinpoint exactly how you got your phone this way.
garylaw said:
not suitable for my device and thanks for trying to help me..
Click to expand...
Click to collapse
Mate, I already checked your SN at the HTC Website.
I found that that your HD2 is Hongkong Region.
So, you should go to HTC Website, and Select Country: "Hongkong-English".
Then you can put your SN there. Download the stock rom from there.
Try to reflash that stock rom. Hopefully works
Good luck
cgigate said:
No rom, . ROM is built-in.
No ROM you will NOT able to see tri-color
Click to expand...
Click to collapse
so what should i need to do?
cgigate said:
No rom, . ROM is built-in.
No ROM you will NOT able to see tri-color
Click to expand...
Click to collapse
so what should i do?
garylaw said:
so what should i do?
Click to expand...
Click to collapse
I would contact HTC. I assume you didn't try to flash it or something like that.
silverwind said:
Mate, I already checked your SN at the HTC Website.
I found that that your HD2 is Hongkong Region.
So, you should go to HTC Website, and Select Country: "Hongkong-English".
Then you can put your SN there. Download the stock rom from there.
Try to reflash that stock rom. Hopefully works
Good luck
Click to expand...
Click to collapse
thanks dude..really thanks..thanks for helping me!i finally can flash my stock rom..i used 2 weeks time to solve this problem but still can't..
I have a Tmobile 1024 Leo. A year ago I put Android and WM on it. It was a dual boot, beacuse they had not done NAND yet. Well I dropped it and broke the screen. So it sat for a year untill I decided to to fix the screen. Now when you turn it on it will not go past the sticking together screen. I can boot it in to the tri-color screen and nothing else. I tried flashing it back to WM and it gets anywhere from 64-99% done, depending on what ROM I use, and then errors out. I tried to do it from the memory card and it will not go into the flash menu. Is this thing bricked? Do I need to have some one with a Riff Box make a go at it? Or am I missing something? If some one has ideas that would be AWESOME!
what does your bootloader say?
check out my thread, you can try the sd card method / task 29
I tried flashing it back to WM and it gets anywhere from 64-99% done, depending on what ROM I use, and then errors out
Click to expand...
Click to collapse
maybe post error or a screenshot of it
maybe at the error are some hints.
then whats your bootloader version @tri color screen?
tried task29?
maybe installed a wrong HSPL/SPL version?
You should download the HD2 Nand Toolkit from Nand Development.
http://forum.xda-developers.com/showthread.php?t=1090783
Install it and do a Task29 Wipe. From there on you should check your Radio. Most of the time you need 2.15.50.14. Then install HARDSPL 2.08 and then you can flash whatever ROM you like. Check this : http://forum.xda-developers.com/showthread.php?t=893948
Hope I could help!
jsmccabe78 said:
what does your bootloader say?
Click to expand...
Click to collapse
Okay the Tri-Color screen shows :
PB81120 SS-B3
SPL-2.08.HSPL 8G Xe
0x05
CotullaHSPL 0x50
Then in the top righ hand corner of the screen it shows.
RUUNBH
putti71 said:
You should download the HD2 Nand Toolkit from Nand Development.
http://forum.xda-developers.com/showthread.php?t=1090783
Install it and do a Task29 Wipe. From there on you should check your Radio. Most of the time you need 2.15.50.14. Then install HARDSPL 2.08 and then you can flash whatever ROM you like. Check this : http://forum.xda-developers.com/showthread.php?t=893948
Hope I could help!
Click to expand...
Click to collapse
I downloaded the tool kit like you recommended, and then did the task29 wipe. Then I tried to install the radio that you recomened. It installs to 96% done and then freezes. Not sure what to do next.
UPDATE:
Got MagLdr to install. When I push power then the volume button to get it to open, it brings up the MagLdr screen and then there are no options to use. But when it was flashing, the computer said error communicating with device, but the screen on the phone shows that it was at 100%.
Nevermindd
Sent from my HTC HD2 using XDA Premium App
Any good ideas or am I just screwed?
This is gonna sound dumb.....but try it on a different computer.
Sent from my HTC HD2 using XDA Premium App
HTC HD2 i tryed install MAGDLR113.daf on my hd2
wen it reset it stayed on the white screen saying HTC
but wen i went to boot it came up with this message
PB81100 HX-BC
SPL-3.03.HSPL XE
0X05
CotullaHSPL 0x50
its in the red green blue and white it just says serial but wen i connect it to usb it changes to usb
any suggestions and does this mean its bricked?
thanks
magldr thread, post 1, sentence 4 in bold font..
''You need HardSPL 2.08 before installation!'', ,
you have 3.03.hspl
therefore, it wont start magldr.
oyeri2001 said:
does this mean its bricked?
Click to expand...
Click to collapse
no, just means you failed to read the instructions.
enter your "red green blue white" mode again and re run hspl install, but select as, previous suggested spl 2.08.
Then try to install magldr.
dont worry, its ok )
down4life said:
Then try to install magldr.
Click to expand...
Click to collapse
no need to reinstall magldr, , its already there. once the spl and radio are correct it will start.
hello
my HTC HD2 shuck on t-mobile (stick together)pink logo
i try to hard reset/soft reset but not done.
so i try to update,then download
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
run that but at last when progress bar coming always stay on "0%"
i try with sd card too but stop on "loading...."
when it come in tri-colour there show this info..
Code:
PB81100 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
how to make properly update it?
where is wrong??
please need BIG help.
is this ROM for your Tmobile phone? I think this is for EU version.
Use this one and if it is works, press thanks button
http://forum.xda-developers.com/showthread.php?t=655653
different region ROM ?
Can you try to installing region specific ROM instead of Asia/India version. I faced similar problem last week as I bought phone in Europe (WWE version) but I was trying to update using Asia/India version.
Also, have you ever used HSPL on your phone?
Boot the device into boot loader and connect it to your computer via USB and flash HSPL 3.03 to it. Then run the RUU again.
T-Macgnolia said:
Boot the device into boot loader and connect it to your computer via USB and flash HSPL 3.03 to it. Then run the RUU again.
Click to expand...
Click to collapse
dear sir,
thanks for reply,
I do as u say.1st make HSPL 3.03 via HSPL4. now updating start but sometime 5%,
sometime 13%,sometime 32% go then error.
what is wrong?
Run RUU file with right click and choose "Run as Administrator",
or
some of your USB device like mouse may be deny your htc device
or
is your usb cable good, are you touching your usb cable during installation?
sattar_00977 said:
dear sir,
thanks for reply,
I do as u say.1st make HSPL 3.03 via HSPL4. now updating start but sometime 5%,
sometime 13%,sometime 32% go then error.
what is wrong?
Click to expand...
Click to collapse
As powerthink posted above me, right click on the RUU and run it as administrator. Also just keep trying it for a while and maybe it will finish the flash. If it just will not finish the flash and keeps giving you errors. Then you can try flashing from SD card, and if that does not work you can try a earlier ROM version.
T-Macgnolia said:
As powerthink posted above me, right click on the RUU and run it as administrator. Also just keep trying it for a while and maybe it will finish the flash. If it just will not finish the flash and keeps giving you errors. Then you can try flashing from SD card, and if that does not work you can try a earlier ROM version.
Click to expand...
Click to collapse
hello sir
i try via sdcard flashing.
I put (RUU_Leo_HTC_GER_1.66.407.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship)
update compate. but now no power on/no bootlodermode
how to recover?
sattar_00977 said:
hello sir
i try via sdcard flashing.
I put (RUU_Leo_HTC_GER_1.66.407.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship)
update compate. but now no power on/no bootlodermode
how to recover?
Click to expand...
Click to collapse
Please tell me you do not have a TMOUS HD2? If you do I am very sorry but you hard bricked your HD2. Do you see the 51 I highlighted in the radio version of the RUU you posted? You can not flash a radio with a 51 in it to a TMOUS or you will brick the device. I really wished you would have posted that before you flashed or at least clicked on my guide linked in my sig as I descuss this at the very top of my guide. I am truly sorry friend. The only thing you can do now is have the device JTAGed to fix it. If you want I can give you the contact info on someone that does this for around 40 USD plus shipping and handling.
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
powerofthink said:
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
Click to expand...
Click to collapse
Sorry powerthink, I hate it as much as anybody else. But it sounds like sattar_00977 has a TMOUS because no bootloader after a complete flash and the ROM had radio version 2.0 7.51.22_2 in it sounds like a bricked TMOUS to me.
powerofthink said:
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
Click to expand...
Click to collapse
yes sir battery is fully charged.
Try to use "Reset" button instead of "power" button and "Volume" button together
but not happeaning any thing.
How does one find if its a TMOUS mobile or a non-TMOUS mobile?
T-Macgnolia said:
Sorry powerthink, I hate it as much as anybody else. But it sounds like sattar_00977 has a TMOUS because no bootloader after a complete flash and the ROM had radio version 2.0 7.51.22_2 in it sounds like a bricked TMOUS to me.
Click to expand...
Click to collapse
you are right sir it has (bricked TMOUS). i repair it. repair done. now it show bootloder mode. now it show
PB81100 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
so please help me which rom is perfect ? if possible link too give.
thanks.
sattar_00977 said:
you are right sir it has (bricked TMOUS). i repair it. repair done. now it show bootloder mode. now it show
so please help me which rom is perfect ? if possible link too give.
thanks.
Click to expand...
Click to collapse
Well first off I am glad you got your device back up and going, but I am curious how you did this, I mean when you JTAG a HD2 it puts HSPL 2.08 on it. Then you can load a ROM to the device. But you say you have SPL-2.10.0000. Did you already flash something to the device after JTAG?
Either way please do not flash a ROM with a radio version that has 51 in it like the last ROM you flashed. Also do not flash a radio version that is below 2.08.50.?? because evfen though they have a 50 in them. The radio versions below 2.08.50.?? or actually 51 radios because they were used in the TMOUS test toms.
Flash the 3.14.1 ROM from this thread, but do not ever flash the 2.01 through 2.09 ROMs from that thread. Also only flash Windows Mobile ROMs from this section of the Windows Mobile development forum.
Did you try last ROM (3.14.1) at following link?
http://forum.xda-developers.com/showthread.php?t=655653
powerofthink said:
Did you try last ROM (3.14.1) at following link?
http://forum.xda-developers.com/showthread.php?t=655653
Click to expand...
Click to collapse
Thanks sir last ROM (3.14.1) upgrade sucessfully but set still hang on "stick together" pink logo, i resetting, hard reset but same.
how to recover?
i am afraid your phone was bricked. but still, I have a little hope
If you still have time and have patience;
Change your HSPL to 2.08.HSPL,
Choose one of them;
1. install this Android ROM which i give you now. It is not only EU version but also TMOUS version. You can use it.
http://forum.xda-developers.com/showthread.php?t=733649
2. You can use this ROM. it is Windows 6.5 ROM for TMOUS.
http://forum.xda-developers.com/showthread.php?t=654504
NOTE : And you have to apply which one you prefer to use, please read this.http://forum.xda-developers.com/showpost.php?p=27266966&postcount=4
powerofthink said:
i am afraid your phone was bricked. but still, I have a little hope
If you still have time and have patience;
Change your HSPL to 2.08.HSPL,
Choose one of them;
1. install this Android ROM which i give you now. It is not only EU version but also TMOUS version. You can use it.
http://forum.xda-developers.com/showthread.php?t=733649
2. You can use this ROM. it is Windows 6.5 ROM for TMOUS.
http://forum.xda-developers.com/showthread.php?t=654504
NOTE : And you have to apply which one you prefer to use, please read this.http://forum.xda-developers.com/showpost.php?p=27266966&postcount=4
Click to expand...
Click to collapse
tnx sir i download
Energy_3.15.2012.SensationXL.LITE.VERSION
but it is zip file how to flash it? via sd card?
i install energy rom sucess but again com NGR logo.
i think i confused so u give direct link of rom please?
-Format your sdcard like FAT32 as primary.
-Copy "Energy_3.15.2012.SensationXL.LITE.VERSION.zip" file into sdcard.
-insert it into your HTC device.
-(on the 3-color screen)Check your HSPL 2.08.HSPL.(not 2.08.0000)
-(on the 3-color screen)do task29.
-(on the 3-color screen)install Radio 2.15.50.14.
-(on the 3-color screen)install Magldr 1.13.
-(on the magldr) choose option 5. "USB Flash" and you will see "USB Flash....USB" when connected your HTC to your computer,
-For repartition (Cwm Recovery) on left side of HD2 Toolkit, choose 400MB=System Partition and Cache Size=45MB (because your phone TMOUS) and Flash it(with "repartition" button).
-After reboot, on the magldr choose "AD Recovery" and it will go into Recovery mod.
-Then select 'install zip from sd card' in the menu,
-Go down to 'choose zip from sdcard' and select your Energy..zip file and follow steps on your device screen.
-When it ask you which model do you have like TMOUS or EU, please choose TMOUS. (as I remember, "Yes-TMOUS, No-EU", you will see 2 option.
-and wait appr. 5 to 10 minutes.
-if you don't have any problem in your machine, it will install it and when it's complete you will choose "reboot your device"
-thats all..
http://d-h.st/C9XEnergy_3.15.2012.SensationXL.LITE.VERSION.zip
http://d-h.st/geXEnergy_3.15.2012.SensationXL.zip