Database Users

[Solved] heyyyy help me please with rom!

I wanted to install italian artemis rom...and i downloaded HSPL2 and task29 provided and i installed them...but now my hd2 don't switch on....it doenst work...please someone helps me.....give me a help...what should I do to have my old hd2?

when you say it does not switch on what does exactly happens?
The screen stays black dead or it gets stuck on the white htc screen?

johcos said:
when you say it does not switch on what does exactly happens?
The screen stays black dead or it gets stuck on the white htc screen?
Click to expand...
Click to collapse
it's all black....it's died.....

ChriGothiMark said:
it's all black....it's died.....
Click to expand...
Click to collapse
Try to take out the battery and disconnect it from everything for around 10 min and then put the battery back on and try again.
Can you expain the procedure you followed to install HSPL and task29?

heyyyy...now it's white...with htc logo...but it doesn't start...

johcos said:
Try to take out the battery and disconnect it from everything for around 10 min and then put the battery back on and try again.
Can you expain the procedure you followed to install HSPL and task29?
Click to expand...
Click to collapse
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee

ChriGothiMark said:
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee
Click to expand...
Click to collapse
So you have installed hspl and then run Task29? Have you installed the Artemis rom after that? Task29 clears the entire memory of any rom so it will get stuck as there is no rom to boot into.

ChriGothiMark said:
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee
Click to expand...
Click to collapse
Copy in the root of your SD card the artemis nbh renaming it to leoimg.nbh.
Enter boot loader by pressing voldown and pressing the power key if you have it powered off or voldown and reset behind the back cover if its on the white screen and follow the instructions.

first make sure you have hspl install. can you bring your device to the tricolor screen? hold vol down button and power up.

johcos said:
Copy in the root of your SD card the artemis nbh renaming it to leoimg.nbh.
Enter boot loader by pressing voldown and pressing the power key if you have it powered off or voldown and reset behind the back cover if its on the white screen and follow the instructions.
Click to expand...
Click to collapse
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???

ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
tell us what you see... what's your spl version?

ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
make sure you have renamed the file to leoimg.nbh and you have HSPL installed.
then try to enter again the tricolor screen but the minute you see it release the voldown key and a grey screen sould appear telling you to press power button to update the rom

gianton said:
tell us what you see... what's your spl version?
Click to expand...
Click to collapse
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white

ChriGothiMark said:
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white
Click to expand...
Click to collapse
ok now connect your device to usb and flash radio 2.07.51_22 (you can find it in artemis thread).
then bring your device again to the tricolor screen and flash artemis v17 the same way.
then hard reset and you are done!

ChriGothiMark said:
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white
Click to expand...
Click to collapse
if you can't manage to get to the grey screen extract the attached file and put it with the artemis nbh file in the same folder in your pc and run it leaving your phone in the screen that says USB and follow the on screen instuctions

it's advised to read 1st this tutorial http://forum.xda-developers.com/showthread.php?t=609477

ok.....i think the rom is istalling......) hope hope hope...

gianton said:
it's advised to read 1st this tutorial http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
Yes you will find all the info you need in there.
PS: Don't worry your HD2 is ok.

thxxxxxxx buddiessss.....u saved my life.....God bless you so much...

ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
THEN . . .
1. connect to pc via usb
2. flash the ROM of your choice (double click on the Custom_RUU that
the ROM came with.

[Q] Error After installing maglder

hi All
after installing ROMupdateutility.exe to my HD2 ,while restarting to get the black screen that have 9 choice but i didnt get this black screen and its stopped in HTC logo white screen,
whats wrong with this and what i have to do?
thanks alot.

I f you install no rom that's a bit normal
When you start your phone, push the power button and hold it until you get the menu.

i didnt get it yet, its 5 minutes
thanks,

What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.

Beany69 said:
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Click to expand...
Click to collapse
its 2.o8
Sent from my HTC Desire using XDA App

Problem with maglder
Hi
I am trying to install Magldr on my HTC HD2, SPL 2.08, however i am getting the following error message everytime MagLdr (RomUpdateUtility) restarts my phone to upload the new version,
"ERROR [266]: UPDATE ERROR
The update utility cannot get response from your PDA phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone."
Dont know why it shows this message, I checked all the connections, the SPL shows connected to USB, my Windows 7, 64bit also dectects it, but I am still getting this message. please help

Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.

Beany69 said:
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Click to expand...
Click to collapse
thanks Beany69, Not sure, I am new to this thing, right, let me tell you extactly what it shows when I start my phone in boot mode or what ever its called i.e. when I press the downkey with green button
"PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40"
is this HSPL, if not how do I upgrade this it the required HSPL., please
and when I run the RomUpdateUtility.exe on my pc, it checks the current version displays it as "Miri"

[Q] How to install Magldr1.13 into my HTC HD2?

Dear all, how can install magldr1.13?
My HTC HD2 showed me "PB81100 SS-BC" in bootloader mode.
I could not to install magldr. Please help me this problem!
(i have HSPL 2.08 installed... )

Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App

Skellyyy said:
Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
yes i had 2.08.hspl, but hold in white background and green htc logo when i installed the magldr1.13 and reboot it!

Hi henrywgs .. i have the same problem what you have faced .. i get stuck at the htc logo after installing magldr .. Information of the bootloader menu of my phone is
PB81100 ss-bc
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
can u help me ?

barun rawat said:
. i get stuck at the htc logo after installing magldr ..
Click to expand...
Click to collapse
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.

samsamuel said:
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.
Click to expand...
Click to collapse
Hi .. i already have radio 2.15.50.14 .. 2.08hspl .. and i tried holding down the power key for almost 10 mins after installing MAGLDR 1.13
Here is everything about my phone ( i hope you can figure out some advice based on this)
Model number below the battery -: PB81110
( By the way on the body of my phone its written HTC PRO.THREE ) this is hd2 right?
Bootloader screen after i installed hspl -:
PB81100 SS-BC
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
( this i dont understand because under the battery of my phone its written PB81110 and not PB81100)
Does this information help to figure out the problem with my phone?
I really appreciate your help

Pro 3 is a pre release test model with only 300some Meg ram. Not sure it will ever work. Can't help, sorry.

Need Help for my HTC HD2 pls pls pls

Hello People, i have a big problem with my HD2,i would make Android on it,first i have install DFT_LEO_MAGLDR113_DAF,then HLSP_RUN and i take maybe the false hspl 2.08 or somthing,and after this my fault i install the spl 1.42.0000 XE
in the red stays MicroP(LED) 0x05
MicroP(TOUCH) 0x50
When i restar the Phone comes only a white screen with HTC
on the down leftside its nothing....how i can make it back PLS PLSHelp

scull11 said:
Hello People, i have a big problem with my HD2,i would make Android on it,first i have install DFT_LEO_MAGLDR113_DAF,then HLSP_RUN and i take maybe the false hspl 2.08 or somthing,and after this my fault i install the spl 1.42.0000 XE
in the red stays MicroP(LED) 0x05
MicroP(TOUCH) 0x50
When i restar the Phone comes only a white screen with HTC
on the down leftside its nothing....how i can make it back PLS PLSHelp
Click to expand...
Click to collapse
Go into bootloader, Install MAGLDR and then install the rom you want.

The BootLoader starts on the phone after press and hold volume down and power button,and MAGLDR ist the file ROMUpdateUtility.exe right ? When i make this he says Image From:here stays nothing
To: Image Version : 2.00.000.0
and after a whie i become a error code 229 i mean.
and the bootload is the screen with red,green,blue and white or
Im not understand who i can find this 4. Boot LEO and select in the menu "4. USB Flasher" ???

the mgldr is the secondary bootloader that allows nand android/zips and wp7. try the hd2 toolkit. follow the directions carefully and you should be fine

i have this toolkit,but im have no idea to use it,maybe u can help me a littlebit pls my brain will explod

I think i have no original rom more on my HD2 what can i make pls guys help me,im buy today my HD2 and im so unlucky

scull11 said:
I think i have no original rom more on my HD2 what can i make pls guys help me,im buy today my HD2 and im so unlucky
Click to expand...
Click to collapse
you need to start from the beginning ... follow those steps:
1. flash stock rom with sd card method ( go download with your hd2 serial number from htc if you have hd2 leo, otherwise go to t-mobile if you have tmob version)
2.Flash hsdp 2.08
3. flash radio
4.flash MAGLDR or cLK
5.Flash android rom - follow exact guide provided when you download android rom.

Radio,,, no rgd info on splashscreen is radio.
Flash a ..50.. Radio before anything else.

[Q] HD 2 reboots when I try to flash Radio or HSPL

Bootloader Display:
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
First I install HSPL 2.08.HSPL and Hack it was displayed
Second step was Wipe Task29 Success
Know when I try to install the radio my devices reboots
Can someone help me ?
Thanks
Timo

OK, what do you want after you install the radio? The radio isn't supposed to show anything.
(And btw, don't do Task29, it's useless)

Marvlesz said:
OK, what do you want after you install the radio? The radio isn't supposed to show anything.
(And btw, don't do Task29, it's useless)
Click to expand...
Click to collapse
It´s my first try to add android to my hd2.
Now I have access to MAGLDR menu.
With AD Recovery I add a customize rom tomy phone but now it will not boot if my usb card is insert.

I couldn't understand, could you please be more clear?
What do you mean by "USB card", "will not boot" ?