Hello People, i have a big problem with my HD2,i would make Android on it,first i have install DFT_LEO_MAGLDR113_DAF,then HLSP_RUN and i take maybe the false hspl 2.08 or somthing,and after this my fault i install the spl 1.42.0000 XE
in the red stays MicroP(LED) 0x05
MicroP(TOUCH) 0x50
When i restar the Phone comes only a white screen with HTC
on the down leftside its nothing....how i can make it back PLS PLSHelp
scull11 said:
Hello People, i have a big problem with my HD2,i would make Android on it,first i have install DFT_LEO_MAGLDR113_DAF,then HLSP_RUN and i take maybe the false hspl 2.08 or somthing,and after this my fault i install the spl 1.42.0000 XE
in the red stays MicroP(LED) 0x05
MicroP(TOUCH) 0x50
When i restar the Phone comes only a white screen with HTC
on the down leftside its nothing....how i can make it back PLS PLSHelp
Click to expand...
Click to collapse
Go into bootloader, Install MAGLDR and then install the rom you want.
The BootLoader starts on the phone after press and hold volume down and power button,and MAGLDR ist the file ROMUpdateUtility.exe right ? When i make this he says Image From:here stays nothing
To: Image Version : 2.00.000.0
and after a whie i become a error code 229 i mean.
and the bootload is the screen with red,green,blue and white or
Im not understand who i can find this 4. Boot LEO and select in the menu "4. USB Flasher" ???
the mgldr is the secondary bootloader that allows nand android/zips and wp7. try the hd2 toolkit. follow the directions carefully and you should be fine
i have this toolkit,but im have no idea to use it,maybe u can help me a littlebit pls my brain will explod
I think i have no original rom more on my HD2 what can i make pls guys help me,im buy today my HD2 and im so unlucky
scull11 said:
I think i have no original rom more on my HD2 what can i make pls guys help me,im buy today my HD2 and im so unlucky
Click to expand...
Click to collapse
you need to start from the beginning ... follow those steps:
1. flash stock rom with sd card method ( go download with your hd2 serial number from htc if you have hd2 leo, otherwise go to t-mobile if you have tmob version)
2.Flash hsdp 2.08
3. flash radio
4.flash MAGLDR or cLK
5.Flash android rom - follow exact guide provided when you download android rom.
Radio,,, no rgd info on splashscreen is radio.
Flash a ..50.. Radio before anything else.
Related
Guys,
Help me out ASAP please.
I have an HD2 which screen isn't working and need to give for repair.
The problem is I already flashed Energy ROM and now I need to revert back to stock ROM.
I have reflashed my drive to shipped ROM, but when I go to the boot loader (Vol down power) I get the following:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
I don't think that is the stock HSPL, or whatever its name is. How do I get my device back to stock situation??? I must give the device tomorrow for repair so I really don't have any time. Have to do it ASAP.
Thanks
mobiler said:
Guys,
Help me out ASAP please.
I have an HD2 which screen isn't working and need to give for repair.
The problem is I already flashed Energy ROM and now I need to revert back to stock ROM.
I have reflashed my drive to shipped ROM, but when I go to the boot loader (Vol down power) I get the following:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
I don't think that is the stock HSPL, or whatever its name is. How do I get my device back to stock situation??? I must give the device tomorrow for repair so I really don't have any time. Have to do it ASAP.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=609477
Check the link above, and read.
run hspl2 and choose 1.42.0000
That's odd, coz when you flash a stock ROM via SD-Card it practically overwrites everything in the cellphone (including SPL, Radio, bootscreen) to stock values..
Anyway in case you flashed the stock ROM using the customruu utility, just launch hspl3 again---> select SPL 1.42.0000 from the drop down list----> flash that and you should be good to go.
MartinXDA said:
just launch hspl3 again---> select SPL 1.42.0000 from the drop down list----> flash that and you should be good to go.
Click to expand...
Click to collapse
hspl2, , ,, hspl3 doesnt have 1.42.0000 as an option.
samsamuel said:
hspl2, , ,, hspl3 doesnt have 1.42.0000 as an option.
Click to expand...
Click to collapse
yeah right..sorry 'bout that.
Thanks. You guys are great.
Dear all, how can install magldr1.13?
My HTC HD2 showed me "PB81100 SS-BC" in bootloader mode.
I could not to install magldr. Please help me this problem!
(i have HSPL 2.08 installed... )
Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App
Skellyyy said:
Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
yes i had 2.08.hspl, but hold in white background and green htc logo when i installed the magldr1.13 and reboot it!
Hi henrywgs .. i have the same problem what you have faced .. i get stuck at the htc logo after installing magldr .. Information of the bootloader menu of my phone is
PB81100 ss-bc
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
can u help me ?
barun rawat said:
. i get stuck at the htc logo after installing magldr ..
Click to expand...
Click to collapse
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.
samsamuel said:
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.
Click to expand...
Click to collapse
Hi .. i already have radio 2.15.50.14 .. 2.08hspl .. and i tried holding down the power key for almost 10 mins after installing MAGLDR 1.13
Here is everything about my phone ( i hope you can figure out some advice based on this)
Model number below the battery -: PB81110
( By the way on the body of my phone its written HTC PRO.THREE ) this is hd2 right?
Bootloader screen after i installed hspl -:
PB81100 SS-BC
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
( this i dont understand because under the battery of my phone its written PB81110 and not PB81100)
Does this information help to figure out the problem with my phone?
I really appreciate your help
Pro 3 is a pre release test model with only 300some Meg ram. Not sure it will ever work. Can't help, sorry.
Hi,
I tried today to flash android to my HTC HD2 but it went wrong
I flashed the radio 2.08 HSPL and the phone started oke to windows.
But when I updated the rom to install magldr it said that it was successful but the phone stuck in the white screen with green HTC logo and did not show magldr or any thing else just the htc screen
Please help me to repair it and flash android.
When I press volume down en power button I get the 4 colors screen. I get this text on it:
PB1100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
PLEASE HELP ME
Something went wrong when flashing MAGLDR.
Don't worry your phone is not bricked. Try task29 and then flash MAGLDR again.
fpu
Since task29 doesn't touch the area where magldr is flashed, that step is pointless.
Sounds more like wrong radio, since magldr doesn't trigger without radio and hspl combo,,, what radio did you flash?
I flashed the radio to 2.15.50.14 I found here: http://forum.xda-developers.com/showthread.php?t=611787
I installed the recovery and it's working BUT it does not install ROMs The error is: Can't open the ROM
How can I solve this again
SOLVED. Look here: http://forum.xda-developers.com/showthread.php?p=16785804#post16785804
HTC HD2 i tryed install MAGDLR113.daf on my hd2
wen it reset it stayed on the white screen saying HTC
but wen i went to boot it came up with this message
PB81100 HX-BC
SPL-3.03.HSPL XE
0X05
CotullaHSPL 0x50
its in the red green blue and white it just says serial but wen i connect it to usb it changes to usb
any suggestions and does this mean its bricked?
thanks
magldr thread, post 1, sentence 4 in bold font..
''You need HardSPL 2.08 before installation!'', ,
you have 3.03.hspl
therefore, it wont start magldr.
oyeri2001 said:
does this mean its bricked?
Click to expand...
Click to collapse
no, just means you failed to read the instructions.
enter your "red green blue white" mode again and re run hspl install, but select as, previous suggested spl 2.08.
Then try to install magldr.
dont worry, its ok )
down4life said:
Then try to install magldr.
Click to expand...
Click to collapse
no need to reinstall magldr, , its already there. once the spl and radio are correct it will start.
Help I am stuck in bootloader. i flashed a tmo us rom on my tmobile hd2 and now i am stuck in the bootloader. the spl changed when i flashed and does after i put hardspl again. Can somebody help me and i have triied installing through sd card and usb.
Are you sure your HD2 is a tmous or eu. If it's call and end buttons are red, it's a TMOUS.
How did you flash the rom. By SD card or by PC via RUU?
Yes it is us because I bought it from T-Mobile and I tried flashing both ways
But, you didn't explain how did you get stuck in boot loader. Didn't you pull the battery?
i pulle dthe battery and put it back in and it still boots into boot loader
i got stuck in boot loader by downgrading from android to wm 6.5
You are telling that your device boots into bootloader pressing the power button and does not perform a normal boot. If so, please state the name of the ROM you flashed and the output of the tri-colour screen.
i flashed the 3.14 one from the official too website
i meant tmobile website
What does the tri-colour screen say?
it says
PB81120 SS-b3
SPl-2.08.HSPL 8G XE
0x05
Cotulla HSPL 0x40
Does the blue colured row say "rom update code" failed. The output you wrote and nothing is wrong with the bootloader and it is normal. I just can't find the cause of it.
Do not waste your time searching for a solution
I've been through the same problem since more than a year and lost a lot of time to solve this problem and I did not find a solution through the Internet
Everything seems sound, but you always boot to bootloader.
it asks for qualcom cmda drivers
you should probably do a factory reset on the phone
saniyal said:
it asks for qualcom cmda drivers
Click to expand...
Click to collapse
No more ideas man.
http://forum.xda-developers.com/showthread.php?t=408105
Try to find something in this topic!
Are you still lost OP?
Sent from my LG-P999 using xda premium
i have the same problem. Just bought today a HTC HD 2 here in Portugal, it is factory unlocked, it brought Android ICS in it, i downloaded PTG latest ROM and rename to leoimg.nbh. it stopped updating, and now i can't do HSPL4 'cause i am on SPL 3.03.0000
and it appears the following on tri-color screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
please give me a solution for this problem, please
To fix it, search xda for mtty.exe, than perform task 29 and than task 2a and than task 8, than reboot to 3 color screen again and install oficial ruu wince rom