Hi,
I tried today to flash android to my HTC HD2 but it went wrong
I flashed the radio 2.08 HSPL and the phone started oke to windows.
But when I updated the rom to install magldr it said that it was successful but the phone stuck in the white screen with green HTC logo and did not show magldr or any thing else just the htc screen
Please help me to repair it and flash android.
When I press volume down en power button I get the 4 colors screen. I get this text on it:
PB1100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
PLEASE HELP ME
Something went wrong when flashing MAGLDR.
Don't worry your phone is not bricked. Try task29 and then flash MAGLDR again.
fpu
Since task29 doesn't touch the area where magldr is flashed, that step is pointless.
Sounds more like wrong radio, since magldr doesn't trigger without radio and hspl combo,,, what radio did you flash?
I flashed the radio to 2.15.50.14 I found here: http://forum.xda-developers.com/showthread.php?t=611787
I installed the recovery and it's working BUT it does not install ROMs The error is: Can't open the ROM
How can I solve this again
SOLVED. Look here: http://forum.xda-developers.com/showthread.php?p=16785804#post16785804
Related
Dear all, how can install magldr1.13?
My HTC HD2 showed me "PB81100 SS-BC" in bootloader mode.
I could not to install magldr. Please help me this problem!
(i have HSPL 2.08 installed... )
Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App
Skellyyy said:
Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
yes i had 2.08.hspl, but hold in white background and green htc logo when i installed the magldr1.13 and reboot it!
Hi henrywgs .. i have the same problem what you have faced .. i get stuck at the htc logo after installing magldr .. Information of the bootloader menu of my phone is
PB81100 ss-bc
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
can u help me ?
barun rawat said:
. i get stuck at the htc logo after installing magldr ..
Click to expand...
Click to collapse
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.
samsamuel said:
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.
Click to expand...
Click to collapse
Hi .. i already have radio 2.15.50.14 .. 2.08hspl .. and i tried holding down the power key for almost 10 mins after installing MAGLDR 1.13
Here is everything about my phone ( i hope you can figure out some advice based on this)
Model number below the battery -: PB81110
( By the way on the body of my phone its written HTC PRO.THREE ) this is hd2 right?
Bootloader screen after i installed hspl -:
PB81100 SS-BC
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
( this i dont understand because under the battery of my phone its written PB81110 and not PB81100)
Does this information help to figure out the problem with my phone?
I really appreciate your help
Pro 3 is a pre release test model with only 300some Meg ram. Not sure it will ever work. Can't help, sorry.
Hi all,
i have a problem .... for some reason, after i use HSPL4 + MAGLDR my HD2 (European 512) frozes in the boot procedure. I mean that after i run ROMUpdateutility, even it is installed ok, phone freezes. Or can the initial boot up take more then 5 to minutes ? wWhen it is booting, it is totally frozen, the radio or other info is not shown on lower left corner...
It goes to HSPL (Volume Down + Power On) as normal.
If i flash it back to WinMo, it works. And i can run Android from SDCARD ok...
After i flash, it still goes to HSPL stating:
PB81100 SS-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x50
I have checked that my radio is as it should be (2.15.50.14) and i always flash the latest WinMo back to it...
Kari
Your hspl should be 2.08 instead of 3.03.make hspl4 again and choose it in the list correctly.
Sent from my HTC HD2 using XDA Premium App
Okay, so I have been putting ROMs on my HTC HD2 problem is now i have is it says.
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0X05
COTULLAHSPL 0X40
Now what exactly do I do from here? I try to start normally but it just stays on "Stick Together" Screen. Help?
What was the last thing you did before it had stopped booting (stuck on "stick-together" screen lol) ?
It won't just stop booting for no reason.
check if you can still go to magloader...then re-flash the ROM, just follow thre requirements of the ROM before flashing
download hd2 toolkit, do a task29, and install magldr 1.3, then install wich rom you like
Here check out this guide I wrote. Basically your on step 8. Something has happened and you phone is wiped, but your still good.
This guide is for cLK and and CWM.
Hope this helps!
http://forum.xda-developers.com/showthread.php?t=1402975
If you do a t29 then the phone will be completely wiped of anything including MAGLDR and wm6.5 that would be why it just stays on the boot screen. The next step would be to boot the phone by holding the volume down button and power button until it boots into a tri-color (downloader) screen. Then you can flash MAGLDR and android
Okay so I fixed this problem. If you need to know send me a message.
Sent from my HTC HD2 using XDA App
Hi,
Before I go into detail I've tried googling my issue for days now
I attempted to put HyperDroid on to my HD2 it had Windows Mobile 6.5 on it.
Following the instructions carefully firstly I updated from SPL-1.42.0000 to SPL-2.08.HSPL I did not have a problem doing this.
After that I installed MAGLDR v1.13 it loaded correctly (got to 100%) BUT when it rebooted my HD2 stays on the splash screen so matter what I can get it to boot into MAGLDR
Things I've Tried
Re-flashing MAGLDR v1.13
Tried MAGLDR v1.10 and v1.11
Flashing SPL-1.42.HSPL then installing MAGLDR
Flashing Task29 - Wiping then Re-flashing
Extensive Googleing
Installing cLK - Same Issue
PB81100 HX-BC
SPL-2.08.HSP 8G XE
[EMPTY SPACE] 0x05
CotullaHSPL 0x40
Am I missing something on the third line??
Any help would be greatly appreciated
do task29 > install radio > mag > usbflasher > recovery daf.exe...
then u can flash any rom u want
Thank You!
I'll try it tommrow
remember to use the right partition size based on rom u select.
SudoBen said:
Hi,
Before I go into detail I've tried googling my issue for days now
I attempted to put HyperDroid on to my HD2 it had Windows Mobile 6.5 on it.
Following the instructions carefully firstly I updated from SPL-1.42.0000 to SPL-2.08.HSPL I did not have a problem doing this.
Click to expand...
Click to collapse
so far so good
After that I installed MAGLDR v1.13 it loaded correctly (got to 100%) BUT when it rebooted my HD2 stays on the splash screen so matter what I can get it to boot into MAGLDR
Click to expand...
Click to collapse
because teh radio isnt right
Things I've Tried
Re-flashing MAGLDR v1.13
Tried MAGLDR v1.10 and v1.11
Flashing SPL-1.42.HSPL then installing MAGLDR
Click to expand...
Click to collapse
magldr will ONLY work on 2.08.hspl( it will FLASH, but not start)
Flashing Task29 - Wiping then Re-flashing
Extensive Googleing
Click to expand...
Click to collapse
reading post 1 of themagldr thread would have been more use, especially the bit where it says you MUST have a compatible radio.
Installing cLK - Same Issue
PB81100 HX-BC
SPL-2.08.HSP 8G XE
[EMPTY SPACE] 0x05
CotullaHSPL 0x40
Am I missing something on the third line??
Any help would be greatly appreciated
Click to expand...
Click to collapse
into bootloader, confirm spl line says 2.08.hspl, flash radio 2.15.50, restart, , voila, magldr.
samsamuel said:
so far so goodbecause teh radio isnt rightmagldr will ONLY work on 2.08.hspl( it will FLASH, but not start)reading post 1 of themagldr thread would have been more use, especially the bit where it says you MUST have a compatible radio.
into bootloader, confirm spl line says 2.08.hspl, flash radio 2.15.50, restart, , voila, magldr.
Click to expand...
Click to collapse
Thank you so much haha!!
I thought I bricked my phone from a while there
Need Some help!
Think I may have bricked my HTC HD2
I've followed the guides for newbz for flashing android on Nand I have hspl 2.08 i skipped installing radio 2.15 as i already had 2.07 installed which i think may be the issue, I then installed magldr v1.13 and now im stuck
When I turn my phone on it gets stuck on the white HTC screen when i power on into the boot menu it shows as this
PB81100 HX-BC
SPL-2.08.HSPL 8g XE
0x05
CotullaHSPL 0x40
any ideas?
Help would be very appreciated!
Thanks
Michael.
Update managed to fix it just installed the 2.15 radio from the tri colour boot screen panic over!
Hope that's lesson learned, only skips steps once you know the reason behind the step.
"I skipped this step as I had 2.07",,,, yea, 2.07.51, note the. 51. If you'd had 2.07.50 it would have worked, the 50/51 is the most important part of radio versions. (Not that it matters now yr on 2.15)