Database Users

[Q] How to install Magldr1.13 into my HTC HD2?

Dear all, how can install magldr1.13?
My HTC HD2 showed me "PB81100 SS-BC" in bootloader mode.
I could not to install magldr. Please help me this problem!
(i have HSPL 2.08 installed... )

Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App

Skellyyy said:
Can you not read a simple guide? Make sure you have 2.08.HSPL and not .0000
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
yes i had 2.08.hspl, but hold in white background and green htc logo when i installed the magldr1.13 and reboot it!

Hi henrywgs .. i have the same problem what you have faced .. i get stuck at the htc logo after installing magldr .. Information of the bootloader menu of my phone is
PB81100 ss-bc
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
can u help me ?

barun rawat said:
. i get stuck at the htc logo after installing magldr ..
Click to expand...
Click to collapse
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.

samsamuel said:
Yes of course you do. Installing magldr deletes winmo so there is no OS to boot, and the magldr menu wont appear unless spl is 2.08.hspl (ok so far) AND the radio is android compatible. (I suspect this is your problem).
Enter bootloader, flash radio 2.15.50, magldr should now start and you can move on to flashing cwm and the rom.
Click to expand...
Click to collapse
Hi .. i already have radio 2.15.50.14 .. 2.08hspl .. and i tried holding down the power key for almost 10 mins after installing MAGLDR 1.13
Here is everything about my phone ( i hope you can figure out some advice based on this)
Model number below the battery -: PB81110
( By the way on the body of my phone its written HTC PRO.THREE ) this is hd2 right?
Bootloader screen after i installed hspl -:
PB81100 SS-BC
SPL-2.08.HSPL 8G XD
0x02
CotullaHSPL 0x50
( this i dont understand because under the battery of my phone its written PB81110 and not PB81100)
Does this information help to figure out the problem with my phone?
I really appreciate your help

Pro 3 is a pre release test model with only 300some Meg ram. Not sure it will ever work. Can't help, sorry.

Please help my HTC HD2 stuck on HTC screen

Hi,
I tried today to flash android to my HTC HD2 but it went wrong
I flashed the radio 2.08 HSPL and the phone started oke to windows.
But when I updated the rom to install magldr it said that it was successful but the phone stuck in the white screen with green HTC logo and did not show magldr or any thing else just the htc screen
Please help me to repair it and flash android.
When I press volume down en power button I get the 4 colors screen. I get this text on it:
PB1100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
PLEASE HELP ME

Something went wrong when flashing MAGLDR.
Don't worry your phone is not bricked. Try task29 and then flash MAGLDR again.
fpu

Since task29 doesn't touch the area where magldr is flashed, that step is pointless.
Sounds more like wrong radio, since magldr doesn't trigger without radio and hspl combo,,, what radio did you flash?

I flashed the radio to 2.15.50.14 I found here: http://forum.xda-developers.com/showthread.php?t=611787
I installed the recovery and it's working BUT it does not install ROMs The error is: Can't open the ROM
How can I solve this again

SOLVED. Look here: http://forum.xda-developers.com/showthread.php?p=16785804#post16785804

[Q] HTC HD2 hang on HTC logo

Sir,
I have HTC HD2 hang on HTC logo. When we press - Volume + power button it shows:
PB8100 HX-BX
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X40
I tried it to hard reset, but same. No use of hard reset.
Please reply thank you.

Firstly...i believe u try to flash it to android rom
1. YOU NEED A RADIO WHICH SUPPORTS 576 RAM (2.08.50 or later should be fine but the Radio NEEDS to be 2.**.50.**). I recommed the 2.15.50.14 Radio
2. YOU NEED HARDSPL 2.08 INSTALLED ON YOUR DEVICE TO FLASH MAGLDR
3. MAGLDR 1.13 package
For greater explaination...please read completely without skip any step from this tred
http://forum.xda-developers.com/showthread.php?t=893948

Did you try to update your phone????
Sent from my HTC HD2 using XDA App

task29, wipe all cashes & use more stable ROM

i have hd2 hang at HTC logo without progress bar under.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
how can repair it?

[Q] Major Problem (N00B)

Okay, so I have been putting ROMs on my HTC HD2 problem is now i have is it says.
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0X05
COTULLAHSPL 0X40
Now what exactly do I do from here? I try to start normally but it just stays on "Stick Together" Screen. Help?

What was the last thing you did before it had stopped booting (stuck on "stick-together" screen lol) ?
It won't just stop booting for no reason.

check if you can still go to magloader...then re-flash the ROM, just follow thre requirements of the ROM before flashing

download hd2 toolkit, do a task29, and install magldr 1.3, then install wich rom you like

Here check out this guide I wrote. Basically your on step 8. Something has happened and you phone is wiped, but your still good.
This guide is for cLK and and CWM.
Hope this helps!
http://forum.xda-developers.com/showthread.php?t=1402975

If you do a t29 then the phone will be completely wiped of anything including MAGLDR and wm6.5 that would be why it just stays on the boot screen. The next step would be to boot the phone by holding the volume down button and power button until it boots into a tri-color (downloader) screen. Then you can flash MAGLDR and android

Okay so I fixed this problem. If you need to know send me a message.
Sent from my HTC HD2 using XDA App

[Q] MAGLDR 113 stays at 0%

Hello, I'm trying to flash my friends stock HD2 with
[11JAN'12][ZIP] ★★★★HyperDroid-CM7-v5.7.0[a2sd][CyanogenMod7 LEO 2.3.7][fikret-r1.15] http://forum.xda-developers.com/showthread.php?t=769026
I can't figure out what I'm doing wrong and I need help.
Some info on the HD 2 I'm trying to flash:
OS version: 5.2.21913 (21913.5.0.94)
ROM size: 512 MB
ROM version: 3.14.409.2 (04666) NOR
Radio: 2.15.50.14 (Stock)
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
When I connect the phone to my PC with microUSB the white square in bootloader changes from SERIAL to USB, but WMDC on PC says Not Connected.
When the phone is turned on and in Windows Mobile, WMDC says Connected, and I can browse the files on the phone from my PC.
MAGDLR finds the phone and says update from Image Version 3.14.409.2 to Image Version 2.00.000.0. When I click next the phone boots into bootloader mode and then the percentage bar show up on both PC and phone. The bar does not move, stays at 0% for 5 minutes until MAGLDR times out.
I have tried with 3 different PCs (Windows 7 x86 and x64 and Vista x86), 2 different USB cables. Antivirus is disabled, and I run MAGLDR in admin mode. I also tried MAGLDR111. Same result on all. 0%
Any takers?

you need hspl 2.08.
If you have installed this, you magldr flash will go ahead

Haven't I already got hspl 2.08
klorin said:
...
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
...
Click to expand...
Click to collapse

No, this is SPL.
take HSPL 2.08 from menu..
With HSPL4 you have different Bootloader.. take the right one

its the last 4 digits that are the telltale, , if an spl ends 0000 its stock, if it ends hspl its, , ,wait for it, , HSPL!

Make sure your Phone is loaded for min 50% better is 100%!!
In 3 Color Bootloader Menu you must have USB Connection!!
In HSPL4 you choose 2.08.HSPL,this is the right one.
Now you follow the description of the Programm.
At least on your Phone you can read a notification like "We hacked it".
Congratulation you have HSPL 2.08 ;-))