Need Some help!
Think I may have bricked my HTC HD2
I've followed the guides for newbz for flashing android on Nand I have hspl 2.08 i skipped installing radio 2.15 as i already had 2.07 installed which i think may be the issue, I then installed magldr v1.13 and now im stuck
When I turn my phone on it gets stuck on the white HTC screen when i power on into the boot menu it shows as this
PB81100 HX-BC
SPL-2.08.HSPL 8g XE
0x05
CotullaHSPL 0x40
any ideas?
Help would be very appreciated!
Thanks
Michael.
Update managed to fix it just installed the 2.15 radio from the tri colour boot screen panic over!
Hope that's lesson learned, only skips steps once you know the reason behind the step.
"I skipped this step as I had 2.07",,,, yea, 2.07.51, note the. 51. If you'd had 2.07.50 it would have worked, the 50/51 is the most important part of radio versions. (Not that it matters now yr on 2.15)
Related
Hi,
I tried today to flash android to my HTC HD2 but it went wrong
I flashed the radio 2.08 HSPL and the phone started oke to windows.
But when I updated the rom to install magldr it said that it was successful but the phone stuck in the white screen with green HTC logo and did not show magldr or any thing else just the htc screen
Please help me to repair it and flash android.
When I press volume down en power button I get the 4 colors screen. I get this text on it:
PB1100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
PLEASE HELP ME
Something went wrong when flashing MAGLDR.
Don't worry your phone is not bricked. Try task29 and then flash MAGLDR again.
fpu
Since task29 doesn't touch the area where magldr is flashed, that step is pointless.
Sounds more like wrong radio, since magldr doesn't trigger without radio and hspl combo,,, what radio did you flash?
I flashed the radio to 2.15.50.14 I found here: http://forum.xda-developers.com/showthread.php?t=611787
I installed the recovery and it's working BUT it does not install ROMs The error is: Can't open the ROM
How can I solve this again
SOLVED. Look here: http://forum.xda-developers.com/showthread.php?p=16785804#post16785804
Hi, I just got a new HD2 (after I thrashed my first one). I've been fixing some other peeps phones too, so I know all about the flashing procedure.
I've installed HSPL and a new radio onto the phone, but when I enter the bootloader screen all it shows is:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
Not cotulla or anything. Any ideas about what's wrong?
Sir,
I have HTC HD2 hang on HTC logo. When we press - Volume + power button it shows:
PB8100 HX-BX
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X40
I tried it to hard reset, but same. No use of hard reset.
Please reply thank you.
Firstly...i believe u try to flash it to android rom
1. YOU NEED A RADIO WHICH SUPPORTS 576 RAM (2.08.50 or later should be fine but the Radio NEEDS to be 2.**.50.**). I recommed the 2.15.50.14 Radio
2. YOU NEED HARDSPL 2.08 INSTALLED ON YOUR DEVICE TO FLASH MAGLDR
3. MAGLDR 1.13 package
For greater explaination...please read completely without skip any step from this tred
http://forum.xda-developers.com/showthread.php?t=893948
Did you try to update your phone????
Sent from my HTC HD2 using XDA App
task29, wipe all cashes & use more stable ROM
i have hd2 hang at HTC logo without progress bar under.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
how can repair it?
Hello,
I've been hanging around, reading and playing with my hd2. And now I decided to join. I consider myself newb with this stuff, so now that I've faced a challenge I'm unable to face myself, i ask for your guidance.
I flashed MAGLDR 1.13 on my hd2 and after that it's been just stuck on the white screen. I'm able to get to the four color screen.
What it says;
PB81100 SS-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x50
I updated my rom(couldn't find a downgrade). I put HSPL4 in it and ran customROO. After that MAGLDR 1.13 and I've fought for 10 hours straight with it.
What should I do?
raztin said:
Hello,
I've been hanging around, reading and playing with my hd2. And now I decided to join. I consider myself newb with this stuff, so now that I've faced a challenge I'm unable to face myself, i ask for your guidance.
I flashed MAGLDR 1.13 on my hd2 and after that it's been just stuck on the white screen. I'm able to get to the four color screen.
What it says;
PB81100 SS-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x50
I updated my rom(couldn't find a downgrade). I put HSPL4 in it and ran customROO. After that MAGLDR 1.13 and I've fought for 10 hours straight with it.
What should I do?
Click to expand...
Click to collapse
i think your spl is wrong it sould be SPL 2.08.0000 SPL 2.08.HSPL check here http://forum.xda-developers.com/showthread.php?t=611433 and here http://www.youtube.com/watch?v=4amlg-ogrpM
wp7 guide
http://forum.xda-developers.com/showthread.php?t=971478
http://www.youtube.com/watch?v=Nac3Fnf-lY4
here
Got it working, thanks mate
My HD2 has locked with completely white screen. I searched your posts where I tried flash again HSPL3, 4, Radio 2.15, task 29 but stuck at 0%, I tried to LEOIMG.nbh extracted and copied to the SD card, load half and shows'' radio error ". When flash the stock rom (RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe ) stuck at 1% and restarted with white screen. With the energy rom restarted at 4%. they do not know what to do, hope that you will help me, thanks in advance.
in tricolor mode appears :
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0X05
CotullaHSPL 0X30
Serial number is : HT9ATNW00191
Sorry for my bad English