My HD2 has locked with completely white screen. I searched your posts where I tried flash again HSPL3, 4, Radio 2.15, task 29 but stuck at 0%, I tried to LEOIMG.nbh extracted and copied to the SD card, load half and shows'' radio error ". When flash the stock rom (RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe ) stuck at 1% and restarted with white screen. With the energy rom restarted at 4%. they do not know what to do, hope that you will help me, thanks in advance.
in tricolor mode appears :
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0X05
CotullaHSPL 0X30
Serial number is : HT9ATNW00191
Sorry for my bad English
Related
I have purchased HTC HD2 stuck in boot screen. Only white screen with HTC logo (no red letters with spl etc.)
Now i want to try flash it with stock rom from SD card but i do not now what rom to flash.
Is there a way to identify what is stock rom for my device.
I can enter in bootrom.
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Serial on device starts with HT03CNW....
Please help.
well it doesn't really matter what's on there already if its not booting, just flash any stock rom too check it actually works them change if you need to.
if its a tmous then make sure you flash a compatible stock rom.
if its a branded device then you may find some roms wont flash and you ned to "goldcard" it.
Flash OK, HD2 still stuck in boot screen
Hello,
I have flashed HD2 with RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.
After starting flash radio was flashed, then flash restarted hd2 and then started from begining and everithing flashed OK. i restarted hd2 but status remained the same.
It booted in white screen with HTC logo but there were no red leters in lower part of screen.
Also hd2 after HTC logo vibrated six times. I left phone in that state for 20 minutes, but nothing hapened.
What to do??
In bootloader now:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Any suggestions??
not sure, sorry.
im not that clued up on flashing issues, someone will have an answer for you though...
It sounds as though it may be a operator locked phone and it won't upgrade to a HTC stock ROM.
Where and how did you download the 3.14 ROM?
Any info you can tell us about the phone, ie USA or International, locked to an operator or SIM free?
I downloaded 3.14 from htc.nl site. I wrote serial and it permited me to download fw.
I purchased phone on eBay from guy in Netherlands. He stated that phone is not locked. The rest i do not know.
Yesterday i downgraded spl to 1.42 with sspl and then instaled HSPL 2.
I upgraded to WWE 1.48 but status remain the same.
Also i tryed with mtty and task 28 and task 29 but that also did not change status.
Thanks,
D
I got my new phone but can't seem to properly HSPL2 it installs fine but then restarts on red green blue screen with the standard startup.
PB81100 SS-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I tried flashing via usb but no love any ideas?
I can hear the napalm getting loaded and burners turning on but I can't find any device and I am flying to Vegas tomorrow so need to get this installed ASAP
Thanks
no need for hspl 1-2 or 3 , just use sspl and flash your rom
Just sits at 0% on the update!
I've gone from the best phone in the world to the worst
Can you boot the phone on into BootLoader mode, then plug it into the computer.
Run HSPL2, select the version of HSPL you want.
HI guys
Last week I received one hd2 tmobile-us from my friend. He got stuck when he was trying to install android.
Currently he's stuck at the t-mobile screen, so I tried to do the power+volume down key and here's the result:
Security Unlocked
--------------------------
PB81*** SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x50
MicroP(TOUCH) 0x50
I'm aware that this is the new fone with spl3.03 on it. So here what I tried:
I tried to use hspl4 and install spl2.08 instead of 3.03 on it, and hspl gives me a error (code 0000000D)
I tried to download a old stock rom (LEO_RUU_1_5_TMOUS_2.10.531.0_Radio_2.08.50) and copy to the SD-CARd (8g), but it stuck at the white screen with the "loading...." text
I tried to install the rom by the bootscreen, does not work.
I tried to install MAGLD on spl3.03 anyway, and as expected, it did not work.
I myself do have another hd2 that's running android NAND on it, and I already spent 3 days searching the forum but I can find any answer on my problem. I'm running out of option and dont know what to do next.
Please help
What error does HSPL4 give you exactly?
Hello, I'm trying to flash my friends stock HD2 with
[11JAN'12][ZIP] ★★★★HyperDroid-CM7-v5.7.0[a2sd][CyanogenMod7 LEO 2.3.7][fikret-r1.15] http://forum.xda-developers.com/showthread.php?t=769026
I can't figure out what I'm doing wrong and I need help.
Some info on the HD 2 I'm trying to flash:
OS version: 5.2.21913 (21913.5.0.94)
ROM size: 512 MB
ROM version: 3.14.409.2 (04666) NOR
Radio: 2.15.50.14 (Stock)
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
When I connect the phone to my PC with microUSB the white square in bootloader changes from SERIAL to USB, but WMDC on PC says Not Connected.
When the phone is turned on and in Windows Mobile, WMDC says Connected, and I can browse the files on the phone from my PC.
MAGDLR finds the phone and says update from Image Version 3.14.409.2 to Image Version 2.00.000.0. When I click next the phone boots into bootloader mode and then the percentage bar show up on both PC and phone. The bar does not move, stays at 0% for 5 minutes until MAGLDR times out.
I have tried with 3 different PCs (Windows 7 x86 and x64 and Vista x86), 2 different USB cables. Antivirus is disabled, and I run MAGLDR in admin mode. I also tried MAGLDR111. Same result on all. 0%
Any takers?
you need hspl 2.08.
If you have installed this, you magldr flash will go ahead
Haven't I already got hspl 2.08
klorin said:
...
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
...
Click to expand...
Click to collapse
No, this is SPL.
take HSPL 2.08 from menu..
With HSPL4 you have different Bootloader.. take the right one
its the last 4 digits that are the telltale, , if an spl ends 0000 its stock, if it ends hspl its, , ,wait for it, , HSPL!
Make sure your Phone is loaded for min 50% better is 100%!!
In 3 Color Bootloader Menu you must have USB Connection!!
In HSPL4 you choose 2.08.HSPL,this is the right one.
Now you follow the description of the Programm.
At least on your Phone you can read a notification like "We hacked it".
Congratulation you have HSPL 2.08 ;-))
Need Some help!
Think I may have bricked my HTC HD2
I've followed the guides for newbz for flashing android on Nand I have hspl 2.08 i skipped installing radio 2.15 as i already had 2.07 installed which i think may be the issue, I then installed magldr v1.13 and now im stuck
When I turn my phone on it gets stuck on the white HTC screen when i power on into the boot menu it shows as this
PB81100 HX-BC
SPL-2.08.HSPL 8g XE
0x05
CotullaHSPL 0x40
any ideas?
Help would be very appreciated!
Thanks
Michael.
Update managed to fix it just installed the 2.15 radio from the tri colour boot screen panic over!
Hope that's lesson learned, only skips steps once you know the reason behind the step.
"I skipped this step as I had 2.07",,,, yea, 2.07.51, note the. 51. If you'd had 2.07.50 it would have worked, the 50/51 is the most important part of radio versions. (Not that it matters now yr on 2.15)