Database Users

[Solved] heyyyy help me please with rom!

I wanted to install italian artemis rom...and i downloaded HSPL2 and task29 provided and i installed them...but now my hd2 don't switch on....it doenst work...please someone helps me.....give me a help...what should I do to have my old hd2?

when you say it does not switch on what does exactly happens?
The screen stays black dead or it gets stuck on the white htc screen?

johcos said:
when you say it does not switch on what does exactly happens?
The screen stays black dead or it gets stuck on the white htc screen?
Click to expand...
Click to collapse
it's all black....it's died.....

ChriGothiMark said:
it's all black....it's died.....
Click to expand...
Click to collapse
Try to take out the battery and disconnect it from everything for around 10 min and then put the battery back on and try again.
Can you expain the procedure you followed to install HSPL and task29?

heyyyy...now it's white...with htc logo...but it doesn't start...

johcos said:
Try to take out the battery and disconnect it from everything for around 10 min and then put the battery back on and try again.
Can you expain the procedure you followed to install HSPL and task29?
Click to expand...
Click to collapse
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee

ChriGothiMark said:
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee
Click to expand...
Click to collapse
So you have installed hspl and then run Task29? Have you installed the Artemis rom after that? Task29 clears the entire memory of any rom so it will get stuck as there is no rom to boot into.

ChriGothiMark said:
mmmmm...ok i downloaded the artemis rom on xda forum....but i didn't kow how to install so i watched to the help and then it was written i had to install hspl and then task29....i did it...and an upgrade has been installed...i have 1.66 italian rom....ad when i was installing on task29 installing programm there was written 2.000....then the upgrade was succesfully installed my hd2 switch on but it stopped to the white page with htc logo...( pleaseeeee
Click to expand...
Click to collapse
Copy in the root of your SD card the artemis nbh renaming it to leoimg.nbh.
Enter boot loader by pressing voldown and pressing the power key if you have it powered off or voldown and reset behind the back cover if its on the white screen and follow the instructions.

first make sure you have hspl install. can you bring your device to the tricolor screen? hold vol down button and power up.

johcos said:
Copy in the root of your SD card the artemis nbh renaming it to leoimg.nbh.
Enter boot loader by pressing voldown and pressing the power key if you have it powered off or voldown and reset behind the back cover if its on the white screen and follow the instructions.
Click to expand...
Click to collapse
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???

ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
tell us what you see... what's your spl version?

ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
make sure you have renamed the file to leoimg.nbh and you have HSPL installed.
then try to enter again the tricolor screen but the minute you see it release the voldown key and a grey screen sould appear telling you to press power button to update the rom

gianton said:
tell us what you see... what's your spl version?
Click to expand...
Click to collapse
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white

ChriGothiMark said:
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white
Click to expand...
Click to collapse
ok now connect your device to usb and flash radio 2.07.51_22 (you can find it in artemis thread).
then bring your device again to the tricolor screen and flash artemis v17 the same way.
then hard reset and you are done!

ChriGothiMark said:
on the screen there are written
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
under all there is written USB where the screen is white
Click to expand...
Click to collapse
if you can't manage to get to the grey screen extract the attached file and put it with the artemis nbh file in the same folder in your pc and run it leaving your phone in the screen that says USB and follow the on screen instuctions

it's advised to read 1st this tutorial http://forum.xda-developers.com/showthread.php?t=609477

ok.....i think the rom is istalling......) hope hope hope...

gianton said:
it's advised to read 1st this tutorial http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
Yes you will find all the info you need in there.
PS: Don't worry your HD2 is ok.

thxxxxxxx buddiessss.....u saved my life.....God bless you so much...

ChriGothiMark said:
ok i did it....i have a screen with 4 colors...red, green,blue and white....but it doesnt happen anything...now???
Click to expand...
Click to collapse
THEN . . .
1. connect to pc via usb
2. flash the ROM of your choice (double click on the Custom_RUU that
the ROM came with.

Please help i beg!! =( htc hd2 dose not boot past start up screen.

HELLO EVERY ONE. I AM REALLY IN BIG TROUBLE. ALL THIS HAPPENED AFTER WHEN I DOWNLOADED A TOOL FROM THE INTERNET EXPLORER. AFTER IT DOWNLOADED THE PHONE FROZE. AND SO I TOOK OF THE BATTERY FOR 3 SECONDS AND PUT IT BACK AGAIN. AND THEN PRESSED THE POWER ON BUTTON. THEN IT LOADS THE HTC BOOTING SCREEN AND WONT PASS IT. PLEASE HELP ME.
I AM USING WINDOWS XP SP2.
*WHEN I GO TO BOOT LOADER MODE HERE IS THE INFORMATION IT GIVES:
_________________
PB1100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
___________________
THAT ALL THE INFORMATION IT GIVES.
HERE ARE THE THINGS I HAVE DONE:
1) I TRIED A SOFT RESET.
2) I TRIED A HARD RESET USING BUTTONS.
3) I TRIED TO CONNECT IT TO THE COMPUTER VIA USB BUT IT DOSE NOT RECOGNIZE OR LAUNCH THE ACTIVE SYNC SINCE IT DOSE NOT BOOT PASS THAT HTC LOGO WHICH IS IN WHITE COLOR.
4) SO I WENT TO BOOTLOADER MODE AND CONNECTED VIA USB. BUT STILL THE ACTIVE SYNC DOSE NOT WORK.
5)SINCE IT IS CONNECTED NOW I RUN THE APLICATION HSPL.EXE BUT IT SAYS THAT I NEED SPL VERSION 1.42.000 SOME THING WHEN I ALREADY HAVE IT I THINK.
6) THEN I TRIED TO INSTALL TOM_LEO_RADIO_2.SOMETHING ITO IT USING THE UPDATEUTILITY.EXE IN THE FOLDER. UPDATE COMPLETED. SO I PRESSED THE POWER BUTTON AGAIN. BUT IT STILL DOSE NOT BOOT PAST HTC LOGO SCREEN.
7)I TRIED TO FLASH A CUSTOM ROM USING BOTH METHODS :
A) BY USING THE USB METHOD.
B)THEN I TRIED USING THE SD CARD METHOD... BUT STILL NO LUCK.
IT STILL DOSE NOT BOOT PAST HTC HD2 LOGO SCREEN.
8) THIS IS THE LAST THING I DID UP UNTIL NOW :
A)CHECKED THIS FORUM
BUT STILL IT DID NOT HELP ME SINCE I DONT KNOW WHAT HE DID TO SOLVE IT.
B) SO I AM FINALLY POSTING THIS NEW THREAD.
PLEASE PLEASE HELP ME SINCE I SPENT LOTS OF MONEY TO BUY THIS PHONE.
800$ ON THIS PHONE. PLEASE PLEASE HELP.
THANKS FOR READING THIS THREAD AND THANKS A BUNCH IF U HELP ME HERE.
:

Hello guys!! Please reply>>>>> i really need to fix this problem real fast> please please>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

iyash said:
HELLO EVERY ONE. I AM REALLY IN BIG TROUBLE. ALL THIS HAPPENED AFTER WHEN I DOWNLOADED A TOOL FROM THE INTERNET EXPLORER. AFTER IT DOWNLOADED THE PHONE FROZE. AND SO I TOOK OF THE BATTERY FOR 3 SECONDS AND PUT IT BACK AGAIN. AND THEN PRESSED THE POWER ON BUTTON. THEN IT LOADS THE HTC BOOTING SCREEN AND WONT PASS IT. PLEASE HELP ME.
I AM USING WINDOWS XP SP2.
*WHEN I GO TO BOOT LOADER MODE HERE IS THE INFORMATION IT GIVES:
_________________
PB1100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
___________________
THAT ALL THE INFORMATION IT GIVES.
HERE ARE THE THINGS I HAVE DONE:
1) I TRIED A SOFT RESET.
2) I TRIED A HARD RESET USING BUTTONS.
3) I TRIED TO CONNECT IT TO THE COMPUTER VIA USB BUT IT DOSE NOT RECOGNIZE OR LAUNCH THE ACTIVE SYNC SINCE IT DOSE NOT BOOT PASS THAT HTC LOGO WHICH IS IN WHITE COLOR.
4) SO I WENT TO BOOTLOADER MODE AND CONNECTED VIA USB. BUT STILL THE ACTIVE SYNC DOSE NOT WORK.
5)SINCE IT IS CONNECTED NOW I RUN THE APLICATION HSPL.EXE BUT IT SAYS THAT I NEED SPL VERSION 1.42.000 SOME THING WHEN I ALREADY HAVE IT I THINK.
6) THEN I TRIED TO INSTALL TOM_LEO_RADIO_2.SOMETHING ITO IT USING THE UPDATEUTILITY.EXE IN THE FOLDER. UPDATE COMPLETED. SO I PRESSED THE POWER BUTTON AGAIN. BUT IT STILL DOSE NOT BOOT PAST HTC LOGO SCREEN.
7)I TRIED TO FLASH A CUSTOM ROM USING BOTH METHODS :
A) BY USING THE USB METHOD.
B)THEN I TRIED USING THE SD CARD METHOD... BUT STILL NO LUCK.
IT STILL DOSE NOT BOOT PAST HTC HD2 LOGO SCREEN.
8) THIS IS THE LAST THING I DID UP UNTIL NOW :
A)CHECKED THIS FORUM
BUT STILL IT DID NOT HELP ME SINCE I DONT KNOW WHAT HE DID TO SOLVE IT.
B) SO I AM FINALLY POSTING THIS NEW THREAD.
PLEASE PLEASE HELP ME SINCE I SPENT LOTS OF MONEY TO BUY THIS PHONE.
800$ ON THIS PHONE. PLEASE PLEASE HELP.
THANKS FOR READING THIS THREAD AND THANKS A BUNCH IF U HELP ME HERE.
:
Click to expand...
Click to collapse
Before I put in my two cents.. A word of advice.. Do not write in Caps.. its as if you are yelling at the person reading..
Now to your problem..
I would suggest..
Do a HSPL to a higher version (Would also advice Task 29 format refer http://forum.xda-developers.com/showthread.php?t=644781)
Install a ROM. and let it boot on its own. Do not press the power button as you mentioned you did..
Let us know..

open active sync (not connected) go to the connections and disable usb connections
put phone in bootloader mode
connect phone to pc phone should say serial then change to usb once connected
if so go ahead use task 29 or mtty then flash a new ROM and a compatible radio
oh yes loose the caps lock matey, and dont leave it 5 mins before replying to you're own post

Hello every one again.First of all I would like to apolojize for writing in capital letters. I didd not know that it was a bad thing to writ in caps. I thought that it would be easier for u guys to read letters since its written in BIG letters. I hope you guys will forgive me =/. Thank you very much for replying and i will try all those methods that you guys have mentioned and i will reply the results as soon as i finish.
Thank you very much again.

could u guys also give me a download link of a good rom. i cant decide which rom to download for me. thank you very much all.

help guys.. where can i download a higher hspl? could u please give me a link.

iyash said:
help guys.. where can i download a higher hspl? could u please give me a link.
Click to expand...
Click to collapse
sorry i did not read all what you did write
http://forum.xda-developers.com/showthread.php?t=611433
and

in my case do i have to install hspl 2 ? and in the forum it says to connect active sync but it dosent cuz my phone is not boot past that white screen.

ok im going to install spl 2.08.0000. is it ok?

done.
now im going to use that task 29 thingy.
thanks guys

when i go into bootlaoder it says
PB01100 HX-BC
SPL-2.08.0000 8G XE
MICROP (LED) 0X05
MICROP(TOUCH) 0X40

right now im downloading the rom and radio from this thread :
http://forum.xda-developers.com/showthread.php?t=688342
but the problem is the download link given in task 29 thread it gives radio version Radio 2.08.50.05+ task29.exe
but in the thread i gave above it says that i need radio version Leo_RADIO_15.39.50.07U_2.10.50.26.rar .
so my question is can i use
Leo_RADIO_15.39.50.07U_2.10.50.26.rar + task29.exe

iyash said:
right now im downloading the rom and radio from this thread :
http://forum.xda-developers.com/showthread.php?t=688342
but the problem is the download link given in task 29 thread it gives radio version Radio 2.08.50.05+ task29.exe
but in the thread i gave above it says that i need radio version Leo_RADIO_15.39.50.07U_2.10.50.26.rar .
so my question is can i use
Leo_RADIO_15.39.50.07U_2.10.50.26.rar + task29.exe
Click to expand...
Click to collapse
Yup.. I dont see a problem.. You can also flash any other radio later on..

Athar Mansoor said:
Yup.. I dont see a problem.. You can also flash any other radio later on..
Click to expand...
Click to collapse
not strictly true, not all radios work with all roms (should you decide to flash a custom rom)
Allways check whcih roms are/are not compatible.

hello i have downloaded task 29 and now i have run the application task29.exe but the problem is that i am getting error [262]. I have followed the instructions it gave me to do for recovery and tried again but i still keep getting the same error. PLEASE HELP. i really need to fix this phone real soon =/

please helppp!!
thank you

solved!
i degraded the hspl version to its intiail: the one i had before.

now im going to install a new rom and let u guys know the results/
thanks all.

done installing task29 : now im going to install the radio version required for the rom i told you guys about! is it ok???

Sending HD2 in to HTC

I called HTC to get my phone repaired since the touchscreen is unresponsive. I previously had Android installed on my sd card, and energy rom flashed. I recently downloaded the new update for the phone so that energy rom would be gone. Is there anything else I have to do before I send it in? Something to do with the original HSPL or something..
sorry i'm a complete noob at this, please help ]:

funny my t mobile hd2 touch screen stopped working last week also and i have to send it in also.
i have the first revision model with the red reset button and i have been seeing alot of problems on line with these screens. the second gen ones with the yellow reset button have better screens apparently.
you need to remove the hspl and have just the spl on it.

ryennn said:
I called HTC to get my phone repaired since the touchscreen is unresponsive. I previously had Android installed on my sd card, and energy rom flashed. I recently downloaded the new update for the phone so that energy rom would be gone. Is there anything else I have to do before I send it in? Something to do with the original HSPL or something..
sorry i'm a complete noob at this, please help ]:
Click to expand...
Click to collapse
Get a default Stock Rom that's shipped for your Serial number. Put that on the root of your SD card after naming it to leoimg.nbh.
Now run the bootloader with the SD card inserted, and follow the onscreen steps.
(re)flashing to a stock shipped rom will reset everything, i.e: remove HSPL, stock radio, stock rom, etc.

maseo said:
unny my t mobile hd2 touch screen stopped working last week also and i have to send it in also.
i have the first revision model with the red reset button and i have been seeing alot of problems on line with these screens. the second gen ones with the yellow reset button have better screens apparently.
you need to remove the hspl and have just the spl on it.
Click to expand...
Click to collapse
**** !! I have a red reset button .. m i screwed

maseo said:
Get a default Stock Rom that's shipped for your Serial number. Put that on the root of your SD card after naming it to leoimg.nbh.
Now run the bootloader with the SD card inserted, and follow the onscreen steps.
(re)flashing to a stock shipped rom will reset everything, i.e: remove HSPL, stock radio, stock rom, etc.
Click to expand...
Click to collapse
I flashed the old rom, and tried removing HSPL, but i got an error, now all i see is a triangle with an exclamation mark in the middle... when i turn the power on with the volume down button, i get "Upgrade ROM code error Please try again"
I'm planning to ship it within the next hour, do I have to fix this error before shipping? Or would it be fine..because when I turn it on with the volume down button, it says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
that's default right?

lol i couldn't wait anymore, I mailed it, thanks for your help guys......:\

[Q] Hd2 bricked

I've tried to downgrade my HD2 from 3.14 to 1.66 from SD with leoimg.nbh
But I was wrong and I pressed powerButton instead of pressing volDown.
The result is:
00028002
Not allow
Then because the SPL is changed to 1.42, I've try to reflash 3.14, but the situation now is:
Now in bootloader I have
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
Someone can help me please?
thanks a lot!!
Now if I flash an original ROM I recieved VENDOR ID NOT ALLOWED
Sorry for my poor english...

So you haven't got hspl?
Try holding down both volume up and down and power button that'll do a hard reset
Sent from my HTC HD2 using Tapatalk

Restart the SD Card flashing again with the 1.66 ROM.

Eyy i got some other problem,
when i flashed to SPL-2.08.0000 8G XE
the stock rom didnt start after i flashed it,
i had white screen, then i tried to install radio 2.15.50.14 it gets stuck at 96% and i get ''96%!!'' and now nothings works...
some one any advice? or shall i start a new topic?
Thnx

luca_v3r said:
....
Now if I flash an original ROM I recieved VENDOR ID NOT ALLOWED
Sorry for my poor english...
Click to expand...
Click to collapse
Download the ROM from HTC's website, using your phone's serial number. It may be a stock ROM or one with the telephone company's name on it. You will not be allowed to download one which is not allowed on your phone.

So you haven't got hspl?
Try holding down both volume up and down and power button that'll do a hard reset
Click to expand...
Click to collapse
Now I don't have hspl , hard reset when i press VolUp for restore nothing happened ..
Restart the SD Card flashing again with the 1.66 ROM.
Click to expand...
Click to collapse
The response is not allowed..

pokerfreakje said:
Eyy i got some other problem,
when i flashed to SPL-2.08.0000 8G XE
the stock rom didnt start after i flashed it,
i had white screen, then i tried to install radio 2.15.50.14 it gets stuck at 96% and i get ''96%!!'' and now nothings works...
some one any advice? or shall i start a new topic?
Thnx
Click to expand...
Click to collapse
Download the ROM from HTC's website, using your phone's serial number. It may be a stock ROM or one with the telephone company's name on it. You will not be allowed to download one which is not allowed on your phone.
With the phone off, press and hold the Volume Down button then tap the Power button. You should now be in BootLoader mode.
Connect to your PC and the 'Serial' on the phone should change to 'USB'.
Now you can run the downloaded ROM. Please be patient, sometimes it can sit at 0% or 99% for a good five minutes.

Can i flash it to a android NAND, without a WM Rom? and with a radio 2.05?

You need at least 2.08 Radio. Also, you need HSPL and a Winmo rom to start the MAGLDR install.

Thanks thanks thanks thanks thanks thanks thanks
a lot of ALL!!!!!!
My error is that I try to flash a original ITALIAN rom, but my HD2 is from DE......
I'm very stupid...
Thanks ALL

You need to replace spl with hspl before flashing custom roms
Sent from my HTC HD2 using Tapatalk

help me HTC HD2 shuck on "t mobile logo"

hello
my HTC HD2 shuck on t-mobile (stick together)pink logo
i try to hard reset/soft reset but not done.
so i try to update,then download
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
run that but at last when progress bar coming always stay on "0%"
i try with sd card too but stop on "loading...."
when it come in tri-colour there show this info..
Code:
PB81100 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
how to make properly update it?
where is wrong??
please need BIG help.

is this ROM for your Tmobile phone? I think this is for EU version.
Use this one and if it is works, press thanks button
http://forum.xda-developers.com/showthread.php?t=655653

different region ROM ?
Can you try to installing region specific ROM instead of Asia/India version. I faced similar problem last week as I bought phone in Europe (WWE version) but I was trying to update using Asia/India version.
Also, have you ever used HSPL on your phone?

Boot the device into boot loader and connect it to your computer via USB and flash HSPL 3.03 to it. Then run the RUU again.

T-Macgnolia said:
Boot the device into boot loader and connect it to your computer via USB and flash HSPL 3.03 to it. Then run the RUU again.
Click to expand...
Click to collapse
dear sir,
thanks for reply,
I do as u say.1st make HSPL 3.03 via HSPL4. now updating start but sometime 5%,
sometime 13%,sometime 32% go then error.
what is wrong?

Run RUU file with right click and choose "Run as Administrator",
or
some of your USB device like mouse may be deny your htc device
or
is your usb cable good, are you touching your usb cable during installation?

sattar_00977 said:
dear sir,
thanks for reply,
I do as u say.1st make HSPL 3.03 via HSPL4. now updating start but sometime 5%,
sometime 13%,sometime 32% go then error.
what is wrong?
Click to expand...
Click to collapse
As powerthink posted above me, right click on the RUU and run it as administrator. Also just keep trying it for a while and maybe it will finish the flash. If it just will not finish the flash and keeps giving you errors. Then you can try flashing from SD card, and if that does not work you can try a earlier ROM version.

T-Macgnolia said:
As powerthink posted above me, right click on the RUU and run it as administrator. Also just keep trying it for a while and maybe it will finish the flash. If it just will not finish the flash and keeps giving you errors. Then you can try flashing from SD card, and if that does not work you can try a earlier ROM version.
Click to expand...
Click to collapse
hello sir
i try via sdcard flashing.
I put (RUU_Leo_HTC_GER_1.66.407.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship)
update compate. but now no power on/no bootlodermode
how to recover?

sattar_00977 said:
hello sir
i try via sdcard flashing.
I put (RUU_Leo_HTC_GER_1.66.407.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship)
update compate. but now no power on/no bootlodermode
how to recover?
Click to expand...
Click to collapse
Please tell me you do not have a TMOUS HD2? If you do I am very sorry but you hard bricked your HD2. Do you see the 51 I highlighted in the radio version of the RUU you posted? You can not flash a radio with a 51 in it to a TMOUS or you will brick the device. I really wished you would have posted that before you flashed or at least clicked on my guide linked in my sig as I descuss this at the very top of my guide. I am truly sorry friend. The only thing you can do now is have the device JTAGed to fix it. If you want I can give you the contact info on someone that does this for around 40 USD plus shipping and handling.

Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.

powerofthink said:
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
Click to expand...
Click to collapse
Sorry powerthink, I hate it as much as anybody else. But it sounds like sattar_00977 has a TMOUS because no bootloader after a complete flash and the ROM had radio version 2.0 7.51.22_2 in it sounds like a bricked TMOUS to me.

powerofthink said:
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
Click to expand...
Click to collapse
yes sir battery is fully charged.
Try to use "Reset" button instead of "power" button and "Volume" button together
but not happeaning any thing.

How does one find if its a TMOUS mobile or a non-TMOUS mobile?

T-Macgnolia said:
Sorry powerthink, I hate it as much as anybody else. But it sounds like sattar_00977 has a TMOUS because no bootloader after a complete flash and the ROM had radio version 2.0 7.51.22_2 in it sounds like a bricked TMOUS to me.
Click to expand...
Click to collapse
you are right sir it has (bricked TMOUS). i repair it. repair done. now it show bootloder mode. now it show
PB81100 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
so please help me which rom is perfect ? if possible link too give.
thanks.

sattar_00977 said:
you are right sir it has (bricked TMOUS). i repair it. repair done. now it show bootloder mode. now it show
so please help me which rom is perfect ? if possible link too give.
thanks.
Click to expand...
Click to collapse
Well first off I am glad you got your device back up and going, but I am curious how you did this, I mean when you JTAG a HD2 it puts HSPL 2.08 on it. Then you can load a ROM to the device. But you say you have SPL-2.10.0000. Did you already flash something to the device after JTAG?
Either way please do not flash a ROM with a radio version that has 51 in it like the last ROM you flashed. Also do not flash a radio version that is below 2.08.50.?? because evfen though they have a 50 in them. The radio versions below 2.08.50.?? or actually 51 radios because they were used in the TMOUS test toms.
Flash the 3.14.1 ROM from this thread, but do not ever flash the 2.01 through 2.09 ROMs from that thread. Also only flash Windows Mobile ROMs from this section of the Windows Mobile development forum.

Did you try last ROM (3.14.1) at following link?
http://forum.xda-developers.com/showthread.php?t=655653

powerofthink said:
Did you try last ROM (3.14.1) at following link?
http://forum.xda-developers.com/showthread.php?t=655653
Click to expand...
Click to collapse
Thanks sir last ROM (3.14.1) upgrade sucessfully but set still hang on "stick together" pink logo, i resetting, hard reset but same.
how to recover?

i am afraid your phone was bricked. but still, I have a little hope
If you still have time and have patience;
Change your HSPL to 2.08.HSPL,
Choose one of them;
1. install this Android ROM which i give you now. It is not only EU version but also TMOUS version. You can use it.
http://forum.xda-developers.com/showthread.php?t=733649
2. You can use this ROM. it is Windows 6.5 ROM for TMOUS.
http://forum.xda-developers.com/showthread.php?t=654504
NOTE : And you have to apply which one you prefer to use, please read this.http://forum.xda-developers.com/showpost.php?p=27266966&postcount=4

powerofthink said:
i am afraid your phone was bricked. but still, I have a little hope
If you still have time and have patience;
Change your HSPL to 2.08.HSPL,
Choose one of them;
1. install this Android ROM which i give you now. It is not only EU version but also TMOUS version. You can use it.
http://forum.xda-developers.com/showthread.php?t=733649
2. You can use this ROM. it is Windows 6.5 ROM for TMOUS.
http://forum.xda-developers.com/showthread.php?t=654504
NOTE : And you have to apply which one you prefer to use, please read this.http://forum.xda-developers.com/showpost.php?p=27266966&postcount=4
Click to expand...
Click to collapse
tnx sir i download
Energy_3.15.2012.SensationXL.LITE.VERSION
but it is zip file how to flash it? via sd card?
i install energy rom sucess but again com NGR logo.
i think i confused so u give direct link of rom please?

-Format your sdcard like FAT32 as primary.
-Copy "Energy_3.15.2012.SensationXL.LITE.VERSION.zip" file into sdcard.
-insert it into your HTC device.
-(on the 3-color screen)Check your HSPL 2.08.HSPL.(not 2.08.0000)
-(on the 3-color screen)do task29.
-(on the 3-color screen)install Radio 2.15.50.14.
-(on the 3-color screen)install Magldr 1.13.
-(on the magldr) choose option 5. "USB Flash" and you will see "USB Flash....USB" when connected your HTC to your computer,
-For repartition (Cwm Recovery) on left side of HD2 Toolkit, choose 400MB=System Partition and Cache Size=45MB (because your phone TMOUS) and Flash it(with "repartition" button).
-After reboot, on the magldr choose "AD Recovery" and it will go into Recovery mod.
-Then select 'install zip from sd card' in the menu,
-Go down to 'choose zip from sdcard' and select your Energy..zip file and follow steps on your device screen.
-When it ask you which model do you have like TMOUS or EU, please choose TMOUS. (as I remember, "Yes-TMOUS, No-EU", you will see 2 option.
-and wait appr. 5 to 10 minutes.
-if you don't have any problem in your machine, it will install it and when it's complete you will choose "reboot your device"
-thats all..
http://d-h.st/C9XEnergy_3.15.2012.SensationXL.LITE.VERSION.zip
http://d-h.st/geXEnergy_3.15.2012.SensationXL.zip