Stock ROM 1.66 sart wizard - HD2 General

Hello all,
First let me say that i have searched hight and low for some info about this but didn't get anything (not just on this site but the internet in general).
I bought a t-mobile UK HD2 and have used HardSPL to flash stock HTC ROM 1.66.405.2 from the HTC website - so far so good...
Now I have two issues:
First - when i first turn on the phone i didn't get the "welcome wizard" that normally sets up the connections and email accounts etc... Its like the first run screen is hidden and never completes, when I turn off the phone you can briefly see the "learn about the on-screen keyboard" wizard as Manilla closes
Second - each time i restart the phone it turns on the wifi, even when i specifically turned it off.
My thoughts are that the startup wizard never finishes so there are some settings that don't retain each reboot?
I have tried several hard reboots, and used Task29 to format and re-install the rom from scratch, the connection autosetup isn't such a big deal for me as i can run them manually however this phone is mean to be going to my brother and i don't want him to have any problems in future if he has to reset it...
Anyone see this before or have any suggestions?

Bibble said:
Hello all,
First let me say that i have searched hight and low for some info about this but didn't get anything (not just on this site but the internet in general).
I bought a t-mobile UK HD2 and have used HardSPL to flash stock HTC ROM 1.66.405.2 from the HTC website - so far so good...
Now I have two issues:
First - when i first turn on the phone i didn't get the "welcome wizard" that normally sets up the connections and email accounts etc... Its like the first run screen is hidden and never completes, when I turn off the phone you can briefly see the "learn about the on-screen keyboard" wizard as Manilla closes
Second - each time i restart the phone it turns on the wifi, even when i specifically turned it off.
My thoughts are that the startup wizard never finishes so there are some settings that don't retain each reboot?
I have tried several hard reboots, and used Task29 to format and re-install the rom from scratch, the connection autosetup isn't such a big deal for me as i can run them manually however this phone is mean to be going to my brother and i don't want him to have any problems in future if he has to reset it...
Anyone see this before or have any suggestions?
Click to expand...
Click to collapse
Go into comm manager and switch the phone to off wait about a minute then switch it back on again, the setup wizard should appear after that.

Superb thank you,
Fixed on both counts! Is this quite a well know issue then?
Ta

iang123 said:
Go into comm manager and switch the phone to off wait about a minute then switch it back on again, the setup wizard should appear after that.
Click to expand...
Click to collapse
Lol, wow, I was having that problem and just gave up and flashed a cooked rom, didn't bother to ask for a solution. Thanks for posting this

Dizzle said:
Lol, wow, I was having that problem and just gave up and flashed a cooked rom, didn't bother to ask for a solution. Thanks for posting this
Click to expand...
Click to collapse
Na, to be honest I found it by pure fluke! ha ha
Cheers
Ian

Same here. I found the solution completely by accident but the start wizard being hidden in the background was really starting to annoy me. Glad it's sorted now.
DC

Just switching on airplane mode also brings the wizard on top so you can compleate it.

i had same problems and stumbled over this, great help.. thanks!

Related

Wizard freezes on wake-up while GPRS is AlwaysOn

Hi,
I have MDA Vario version of HTC Wizard.
After a ROM upgrade (to version 2.21.2.11) I have the following problem :
If I set AlwaysOn=1 in the registry, then GPRS is always connected as it should be - but when the device goes out of standby (by pressing (I) button or by an incoming call/message), the keyboard and touch screen do not respond for 10-20s. I can hear beeps when pressing keys but nothing happens (e.g. I cannot pick up a call...). After an annoying while, everything goes back to normal until a next standby-wake up cycle.
I've re-flashed the device with my operator ROM three times already, no other programs are installed (except customization stuff) and still have the same problem.
Before I decide to use some custom ROM, I'd rather try to find some other solution...
Any idea ?
regards
Maciek
AHHH me too
same setting applied and now i can i get a white screen after the tmob boot screen. when i call my phone it dosnt ring but the send & end buttons light up. the green signal indicator light is on too, and thats it. it also sleeps after a few min like normal, but the when i wake it up, the signal light is flashing but the backlight is not on. i really want to figure out how to put a txt file in the root of a card with instructions ot reinstall the backup reg i have. or get an activesync of my favs, list of apps, and outlook. any thoughts would be appreciated.....its my first ppc/wm device (xircom rex 6k --> handera 330 --> sharp zaurus 5500sl --> sharp zaurus 6000l --> HTC Wizard/T-mobile MDA Vario).
Resurrection
Hi - I am having a problem almost identical to the one in the first post. when my phone is in standby something happens which means it does not respond when turned on for about 20seconds, although it will anser a call. it's very annoying if you want to add a date quickly or send a text.
I have turned off gprs always on, removed any storage card plugins, and changed exchange server to only sync the last 3 days instead of everything. I am really a bit confused as tbis problem has only come about since I installed the tmob 2.26 rom and latest uk radio (after unlocking my phone) my phone previously worked fine with the current uk rom but was very slow toboot up. I don't really want to downgrade but i'm not seeing much option rihgt now. did anyone ever solve this?
any help greatly appreciated.
I am not really sure if this is a result of the GPRS ALWAYS ON settings - it just does not look that way!
I had a similar problem without having GPRS always turned on. After I reflashed the phone with exactly the same ROM again everything works fine. Did you booth install the CUSTOM ROM integrated in the flashed ROM as well or did you perform a SOFT RESET before it could install? The reason I ask is because of I think the problem is in the way how the WIZ writes / adds contents to the REGISTRY. It might have been that you resetted the device a bit too fast after HARD RESET or REFLASH and some of your REGISTRY KEYS are messed up!
If you have the possibility to perform a HARD RESET or REFLASH of your device: please try it and see if the problem persists! But please do not reload a backup afterwards because it would import also the faulty registry again ...
Please post your results afterwards, so, others would have a solution in future!
will give that a shot, although I did a completely clean install on this phone - no imported backups etc... is there any tool that can reset my registry to default settings?
the_angry_monkey said:
... is there any tool that can reset my registry to default settings?
Click to expand...
Click to collapse
Not really!
Depending on your phones ROM and CUSTOM ROM your registry will differ from others anyway, so, the only one way to get a 'default registry' is to perform a hard reset.

can't find option to disable return to today screen

* puts on noob protection *
Whenever I turn my device on, it goes back to the today screen and for the life of me cannot find any option to disable this!
I'm using LVSWs WM6 ROM.
RAH! Driving me nuts.
Thanks.
Same
I have the same problem with my PC. Every time I boot it up it goes to the desktop!
Can't work out how to stop it.
esseff said:
I have the same problem with my PC. Every time I boot it up it goes to the desktop!
Can't work out how to stop it.
Click to expand...
Click to collapse
Good to know I'm not the only one. I don't think it always did this either.
Do you have HTweakC installed?
ok I am a little lost here if you put your device in standby it will awake to what ever screen was there before it went to sleep. If you power your phone off completely it HAS to start at the today screen thats just how it boots up... try using the ROM i have posted in the forum in my SIG since i have no issues with it.
austinsnyc said:
ok I am a little lost here if you put your device in standby it will awake to what ever screen was there before it went to sleep. If you power your phone off completely it HAS to start at the today screen thats just how it boots up... try using the ROM i have posted in the forum in my SIG since i have no issues with it.
Click to expand...
Click to collapse
Lol. yours is actually the ROM I'm using.
j0dan said:
* puts on noob protection *
Whenever I turn my device on, it goes back to the today screen and for the life of me cannot find any option to disable this!
I'm using LVSWs WM6 ROM.
RAH! Driving me nuts.
Thanks.
Click to expand...
Click to collapse
I'm not sure that we are understanding your question properly. I can see some of those replying above are puzzled as well.
As Austinsync says above if you turn on after normal sleep mode you return to the screen you were on before. If you fully powered off (not something you should be doing in regular use) then it will go to the today screen.
So, when you start up your device what screen do you expect to see if it's not the today screen?
Mike
I believe I undestand the OP because I have the same problem. No matter what you have loaded, after going into standby the phone returns to the Today screen. The original active app is still loaded, but not in the foreground.
I have tracked the problem down to either pocketbreeze or Handyswitcher. I'll test more when I return from the business trip I am currently on.
Regards,
Marcelo
mfabre said:
I believe I undestand the OP because I have the same problem. No matter what you have loaded, after going into standby the phone returns to the Today screen. The original active app is still loaded, but not in the foreground.
I have tracked the problem down to either pocketbreeze or Handyswitcher. I'll test more when I return from the business trip I am currently on.
Regards,
Marcelo
Click to expand...
Click to collapse
Hmm.. I'm not using either of those programs. As for software running, I'm using HTC X-Button, phonealarm and spb tools.
I just flashed a different ROM. Older LVSW modified by austinsync this time. Same problem!
I just flashed the LVSW by Sleuth255 and it doesn't do this!
It seems to have been a problem with all of austinsync's ROMs. Phone starts up MUCH quicker now too!
EDIT: I just remembered that the customizations from EXTROM didn't run with Sleuth255's ROM. Could be part of it.
I have the same problem with Schap's Rom (3.57). Anyone else?
My .02.
I recently hard-reset my Schap's 3.57 ROM and have installed minimal software that interact with the Today screen. Before hard-resetting the device, my system would also go to the Today screen whenever my device came out of standby. After the hard-reset, it no longer goes to the Today screen until after the timeout period defined in the Today Settings.
Before Hard-Reset on Today Screen:
Office Communicator
Windows Live Search
Activesync Exchange Server Direct Push
Palm Messaging
After Hard-Reset on Today Screen:
Palm Messaging
No Data Connection or Direct Push
Hope this helps.
Murad
-----------------------------------
Running Schap's 3.57 ROM, not the Official HTC WM6 ROM (as in my signature)
I really don't have this problem!
OS see my signature
I just had to hard-reset (Schap's 3.54b), and the device still goes to today screen. Gaaaahhhh!!!
This is also being discussed here.
mikechannon suggested this might only happen when you're using device lock? My exchange admin requires it - I have a device lock and I also use Zenyee Stayunlock to allow me to adjust my settings...

G-Alarm disables TouchFlo?

Every time I install G-Alarm on my phone, TouchFlo seems to get disabled.
It is still enabled in the settings menu, but the home screen is just a HTC wallpaper, and when I press the windows key the start menu is opened.
I have tried rebooting multiple times, but nothing seems to help...
Only removing the application has worked so far for me
Any ideas?
EDIT: I'm having the same problem with G-Profile!
It seems that the programs just disables the TF service from launching/running...
Haven't experienced that problem myself, using G-Alarm v1.5.1 here.
Hmm.. Strange.
I have heard more people say the are using some of the "G-programs" on the Touch Pro 2. So it must be something in the ROM I guess.
I am using an unbranded Dutch version. But I have no clue on how to fix this...
Ok. I have figured out that if I remove the PIN entry screen from the start up sequence (so no PIN has to be entered anymore) G-Profiles works. I haven't tried the others yet, but I'm sure they'll work as well.
The thing is... I would like my phone to have a bit of protection by the PIN code
I don't use G-alarm on my Dutch TP2. But I have this issue with not starting TouchFlo3D also. On HTC advise I resetted the device. Then it worked for abou 4 hours and after that it wouldn't start anymore. The screen staus black with the fancy HTC in the sceen... but no "starting touchflo".
Als for that reason I instaled SPB mobile shell latest... but this will not update new SMS or Mails in the main screen... more people on SPBCLUB have this issue... I think it has something to do with the TP2 and not with SPB... more people with same problems?
Ahh...so that's what causing it.. I have a G-Alarm too but didn't realize it's affecting the interface not loading up
Several soft reset and it'll load up. Kinda annoying until the developer fixes it (and we have to pay for the new version )
I don't think this problem is just with G-applications, I am having the same problem withouth any g-apps installed. After a few reboots it usually works again, but I think this is a more genereal TP2 issue.
michaelra said:
Ahh...so that's what causing it.. I have a G-Alarm too but didn't realize it's affecting the interface not loading up
Several soft reset and it'll load up. Kinda annoying until the developer fixes it (and we have to pay for the new version )
Click to expand...
Click to collapse
I've asked on his forum, and he said it probably was a TouchFLO bug...
Thread here: http://forum.ageye.de/viewtopic.php?f=22&t=721&start=0
(I'm BiT on there...)
I've had the exact same issue but found out that with me it wasn't linked to G-Alarm but to the 'Background4AllTabs' plugin,
I've hard reset tons of times, tried several alternate installs, but once I start changing TF3D options like th background or clocks, it slows down tremendously in screen rotation and it often won't start after reboot...
hmm i dont know if you still have these problems but a few days ago i figured out a solution^^
The problem is the entry. I've got an htc touch pro 2.
Soo to get TF3D starting try fallowing thing:
-Go to "Settings-->Connections" and turn ON the flightmode (this will disconnect all)
-Then restart your phone... wait a few seconds and TADAAA TF3D SHOULD start.
-Go to "Settings-->Connections" turn OFF the flightmode
-Enter your PIN
-Now your phone should connect to your provider.
So if this work you have to do this every time you restart your phone... so turn on flightmode --> restart--> turn off flightmode
I hope this way is not only working on my phone
btw sorry about my english xD
GreeZ $me
Flightmode works for me
Indeed it works now. But I have another interesting thing.
I was used of waiting nicely looking at the PIN input screen. Wait, lets say,. 20 seconds; cancel the pin input and see the Touchflow coming up in 100% of the cases. So I could live with the problem.
Now I installed Navigon who puts a file in the autorun folder. And now Touchflow never starts up any more with the exception of the Flightmode trick.
Is navigon guilty?
i never used G-Alarm but i have the same problem.
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile

Issues with WM 6.5 Official Build

Hello Friends,
I think by now all here might have updated TD2 with WM 6.5.
Many with cooked and many with Official, like me.
I think if we can post all issues with WM 6.5 Official ROM here and we can suggest HTC for any fixes/patches.
Or we/developer here can have fix for that .
Thanks.
Hello
One issue I've come across is when you have the messaging application running in the background and you receive a new SMS the keyboard pops up on the home screen (in Windows deafult/Titanium).
Man.
Hi.
I have noticed sum issues when trying to install some apps. when i choose the destination of where i want to install the app, it just keeps the waiting cursor on the screen and doesnt install.
this is sometimes though. so not sure if it is actually an issue with 6.5 rom
rumz82 said:
Hi.
I have noticed sum issues when trying to install some apps. when i choose the destination of where i want to install the app, it just keeps the waiting cursor on the screen and doesnt install.
this is sometimes though. so not sure if it is actually an issue with 6.5 rom
Click to expand...
Click to collapse
no I have not seen that,
you may just need SDKcerts or NET CF 3.5 to get those apps installed
BTW which apps ???
I've had some issues. Offical 6.5 German ROM
* When using Live Messenger I've had a few hags and I had to restart the phone.
* Without any app running task manager showed 98% used memory... only 2% free and nothing open??? the phone got slooww
* Facebook: When I was with wm6.1 official rom with a fix cab I could use Facebook within contacts, I was able to sync picture, birthday and showed me last update from contact. Now with wm6.5 and facebook that comes it only sync picture. I want birthday back and be able to read last update.
Batery Charge Issue
I think the indicator light does not change to Green even if the batery is fully charged.
Also the information tab does not change the last fully charged value.
PS:
I have seen the "Update for HTC Diamond2 Power LED Notification" update/fix has been release by HTC (http://www.htc.com/in/SupportDownload.aspx?p_id=249&cat=0&dl_id=600) much before the 6.5 release and looks like this is NOT fixed in 6.5.
Thanks.
I've noticed the option to choose LED-blink-time on new messages is no longer available, it's now on 5 minutes and greyed out. What the h*ll was the point of that?! I've talked to HTC, they said "yes, it's grayed out", but had no good reason for it. Seems totally stupid thing to do. Anyone knows how to un-grey the option? A little registry-tweak maybe?
prabhat said:
I think the indicator light does not change to Green even if the batery is fully charged.
Also the information tab does not change the last fully charged value.
PS:
I have seen the "Update for HTC Diamond2 Power LED Notification" update/fix has been release by HTC (http://www.htc.com/in/SupportDownload.aspx?p_id=249&cat=0&dl_id=600) much before the 6.5 release and looks like this is NOT fixed in 6.5.
Thanks.
Click to expand...
Click to collapse
Hi All, Just re-verified and found this is NOT an Issue.
Actually the charging bar shows 100% but still the light was not turned green but after some time it did changed to gree. So NO Issue here.
The only thing is charging does takes lots of time .
spb backup?
Has anyone managed to install spb backup on the official 6.5 rom? I've tried this, and despite claims from spb that the latest version is compatible with 6.5, I always get "install was unsuccessful". Any ideas anyone?
Google maps
Also, google maps does not seem to auto-rotate the screen, although many other apps do. Does anyone know how to control which apps are allowed to rotate or not?
i am using the WWE version, and when i activate the wifi and leave the device for 5 minuts and it goes to sleep, when i press on the power buttom the wifi icon disappear and the wifi switch is still on, and wifi connection is dropped.
Does anybody has the same issue. or it is only me.
How do I make album close instead of minimize?
same problem here with the WiFi.
I really want to like this 6.5 build but there are too many problems.
1)I cannot turn off the LED notification for new emails, even if all options are off. Beyond that all the LED notification options for the phone, text, voicemail are greyed out, why disallow me from choosing?!
2) Memory leakage is horrible, will continue to rise and rise until phone grinds, and this within a day.
3) In a week it has never picked up 'My location'. Google Maps manages this to within 10 metres within 120 seconds without GPS!
4) Settings from within the Windows take you to the very limited settings tab which then needs an extra press to get to all options. Plain bloody stupid.
5) I have found some screens which for some reason wont touch scroll, normally within the MS apps such as myphone after it has synched. Have to use the scrollbar. Feels like the 90's all over again!
HTC have managed to build a ROM for the HD2 in the same time with Winmo 6.5 and yet this ROM is bloody useless, they have dropped the ball badly and i really like HTC.
gtrab said:
no I have not seen that,
you may just need SDKcerts or NET CF 3.5 to get those apps installed
BTW which apps ???
Click to expand...
Click to collapse
Apps like TT7.
i do have SDKcerts & NET CF 3.5.
it could be the version i have with the problem.(tt7)
gwassef said:
i am using the WWE version, and when i activate the wifi and leave the device for 5 minuts and it goes to sleep, when i press on the power buttom the wifi icon disappear and the wifi switch is still on, and wifi connection is dropped.
Does anybody has the same issue. or it is only me.
Click to expand...
Click to collapse
There's a setting for "Turn om WIFI auto" and one something like "Turn off WIFI when inactive for .."
I did these settings the first day, through some sort of wizard, but can't find it back! I guess in your Comm-manager, under "WiFi" it says something like "Turn on Automaticly"?
It's a very nice option, because now WiFi is prioritized over 3G when you try to go online, but where the h*ll did those settings go?!
gwassef said:
i am using the WWE version, and when i activate the wifi and leave the device for 5 minuts and it goes to sleep, when i press on the power buttom the wifi icon disappear and the wifi switch is still on, and wifi connection is dropped.
Does anybody has the same issue. or it is only me.
Click to expand...
Click to collapse
Svennebannan said:
How do I make album close instead of minimize?
Click to expand...
Click to collapse
That issue's been around since atleast 6.1..
gwassef said:
i am using the WWE version, and when i activate the wifi and leave the device for 5 minuts and it goes to sleep, when i press on the power buttom the wifi icon disappear and the wifi switch is still on, and wifi connection is dropped.
Does anybody has the same issue. or it is only me.
Click to expand...
Click to collapse
Yes this happened to me too, and at first I couldn't work out what was going on. Now however I think it is a deliberate feature, probably as a battery saving measure. It all seems to work in a sensible manner: when I come out of standby the WiFi is off, but as soon as I use an app that needs WiFi it automatically reconnects. Also when I am away from my home network, it uses 3G automatically. So I actually like the way it works now.
I have a problem with playing music with touchflo or w.e it is now. I play a song and when it's finished it doesn't play the next song (whether in a playlist or not!) It is set to "Repeat all" but still doesn't play all the songs so i have to get the phone out at every song -.- is this just me or is it a bug?
RE: Issues with WM 6.5 Official Build Reply to Thread
Dear All,
I am also not satisfied with the stock wm6.5 build, I’m using the Dutch-Rom
I have issues with following Items,
1) When my phone shows a pop-up message it “bleeps” eventhough it has been set not to sound while it notificates. Frustrates me every morning as my phone has a custom made get-up-very-smoothly alarm tone and than it starts with a harsh BLEEP !!
2) The powerdrain is horrible, I NEED to charge battery each day, with wm6.1 the device was charged after approx 3 days!
3) Recently experienced something totally new: while I work my D2 always is connected to my pc trough USB and normally charging, I just have been noted by WM6.5 that “the charging power was not enough to charge the device and if I want to charge properly I needed to close down programs…” (excact notification I forgot but in rough words this was the message). Guess what!! The only thing running is Manilla ???
4) My location is not accurate enough
5) Where is the Freakin battery indicator, why do I need to go in to the notification screen to see my battery status, I NEED TO SEE THIS AT ANYTIME HTC!!! :s
These are my main frustrations with the wm6.5 build and certainly hope HTC can fix this
Best regards
Kid Kreole

WIFI Problem with cooked roms

Sometimes i cant get wifi to work, i open comm manager and wifi its turned on even if i have disable it the last time i use. Then i turn it off and turn on again and i cant get it to work. If i made a soft reset with wifi on, the next boot in comm manager the wifi switch its on, but in task bar it's not showing the wifi icon, then i cant connect even if disable and enable.
The only way to make it work again its doing some soft resets, and sometimes even power off, before this i have to disable it in comm manager.
I thought its my phone problem and today installed the standard rom that came with my phone to send it to rma, but before, i try to replicate the problem and no sucess, wifi always working even after turn off, soft reset etc...
I allways do task 29 before flash, except today that i have installed standard rom, then the cooked.
The roms i use to flash are xanny and nrgz, i have the same problem in both, i even try diferent radios...
Any tip?
Thanks
Since I started flashing I've had this problem. Right after the flash WiFi works like a charm but after the first reset it's gone.
Solution I've been using for more than a year now is the following:
- Goto the WiFi Settings in your configuration settings and push on "Wireless Networks"
- Then "Edit" this profile (in WM 6.5.x the button on the bottom of your screen)
- Then goto "Name Servers" and put in your own
Gateway IP address in the DNS box and/or Wins box
- Press "OK" twice and you'll see the WiFi icon popup in your topbar
I know it's not the best solution but at least it works without having to reset it first (until the next reset. 'cause then you'll have to it again)
Hope it's working for you too.
Thanks i wil try next time to do that.
Its very weird my phone have almost 2 years and in the begining i start to flash i didn't have any problems like this, the original rom didn't last 24h in my phone, i didn't know exactly when it start to happen, but its only in the cooked roms.
I couldn't replicate it in the original rom...
But now since i installed the original rom and then a cooked rom it only happens once, lets see if it gets better.
Wifi Blues
Hi all
I am also facing similar issues on my Blackstone. I am using blackstonehenge rom and tried energy, kwbr rom as well. But my wifi and blue tooth some how don't work.
Today for the first time wifi signal was identified but it dried down quickly afterwards. No clue how it came or why it went away.
Please I need assistance. Can any body help Please.
Regards
I have same problem. Any solution?
well, a good start is to flash the latest radio rom. many cooked roms recommend it and have the corresponding rilphone integrated. if you are already on the latest radio, flash a previous version and then back to latest radio. also, after a radio upgrade, a hard reset is recommended. that should usually get it working.
Hi,
This may be way off mark but thought I'd mention it anyway.
My WIFI worked fine on my phone, then I flashed my first cooked rom a couple of weeks ago. After a soft reset, WIFI would start and be fine for a few minutes then wouldn't connect to anything.
I went through the settings and noticed that the WIFI was set to "best Battery". I moved this to "best performance" and WIFI has been fine ever since.
Like I say, this may be too simple but mabye worth a try.
Cheers
Wifi and Blue Tooth
Chef
I followed your guidelines but my blackstone Wifi and Blue Tooth are not yet working.
Anyother advise?
Please Help me??
Regards
dov74 said:
Hi,
This may be way off mark but thought I'd mention it anyway.
My WIFI worked fine on my phone, then I flashed my first cooked rom a couple of weeks ago. After a soft reset, WIFI would start and be fine for a few minutes then wouldn't connect to anything.
I went through the settings and noticed that the WIFI was set to "best Battery". I moved this to "best performance" and WIFI has been fine ever since.
Like I say, this may be too simple but mabye worth a try.
Cheers
Click to expand...
Click to collapse
God Bless You

Categories

Resources