WIFI Problem with cooked roms - Touch HD General

Sometimes i cant get wifi to work, i open comm manager and wifi its turned on even if i have disable it the last time i use. Then i turn it off and turn on again and i cant get it to work. If i made a soft reset with wifi on, the next boot in comm manager the wifi switch its on, but in task bar it's not showing the wifi icon, then i cant connect even if disable and enable.
The only way to make it work again its doing some soft resets, and sometimes even power off, before this i have to disable it in comm manager.
I thought its my phone problem and today installed the standard rom that came with my phone to send it to rma, but before, i try to replicate the problem and no sucess, wifi always working even after turn off, soft reset etc...
I allways do task 29 before flash, except today that i have installed standard rom, then the cooked.
The roms i use to flash are xanny and nrgz, i have the same problem in both, i even try diferent radios...
Any tip?
Thanks

Since I started flashing I've had this problem. Right after the flash WiFi works like a charm but after the first reset it's gone.
Solution I've been using for more than a year now is the following:
- Goto the WiFi Settings in your configuration settings and push on "Wireless Networks"
- Then "Edit" this profile (in WM 6.5.x the button on the bottom of your screen)
- Then goto "Name Servers" and put in your own
Gateway IP address in the DNS box and/or Wins box
- Press "OK" twice and you'll see the WiFi icon popup in your topbar
I know it's not the best solution but at least it works without having to reset it first (until the next reset. 'cause then you'll have to it again)
Hope it's working for you too.

Thanks i wil try next time to do that.
Its very weird my phone have almost 2 years and in the begining i start to flash i didn't have any problems like this, the original rom didn't last 24h in my phone, i didn't know exactly when it start to happen, but its only in the cooked roms.
I couldn't replicate it in the original rom...
But now since i installed the original rom and then a cooked rom it only happens once, lets see if it gets better.

Wifi Blues
Hi all
I am also facing similar issues on my Blackstone. I am using blackstonehenge rom and tried energy, kwbr rom as well. But my wifi and blue tooth some how don't work.
Today for the first time wifi signal was identified but it dried down quickly afterwards. No clue how it came or why it went away.
Please I need assistance. Can any body help Please.
Regards

I have same problem. Any solution?

well, a good start is to flash the latest radio rom. many cooked roms recommend it and have the corresponding rilphone integrated. if you are already on the latest radio, flash a previous version and then back to latest radio. also, after a radio upgrade, a hard reset is recommended. that should usually get it working.

Hi,
This may be way off mark but thought I'd mention it anyway.
My WIFI worked fine on my phone, then I flashed my first cooked rom a couple of weeks ago. After a soft reset, WIFI would start and be fine for a few minutes then wouldn't connect to anything.
I went through the settings and noticed that the WIFI was set to "best Battery". I moved this to "best performance" and WIFI has been fine ever since.
Like I say, this may be too simple but mabye worth a try.
Cheers

Wifi and Blue Tooth
Chef
I followed your guidelines but my blackstone Wifi and Blue Tooth are not yet working.
Anyother advise?
Please Help me??
Regards

dov74 said:
Hi,
This may be way off mark but thought I'd mention it anyway.
My WIFI worked fine on my phone, then I flashed my first cooked rom a couple of weeks ago. After a soft reset, WIFI would start and be fine for a few minutes then wouldn't connect to anything.
I went through the settings and noticed that the WIFI was set to "best Battery". I moved this to "best performance" and WIFI has been fine ever since.
Like I say, this may be too simple but mabye worth a try.
Cheers
Click to expand...
Click to collapse
God Bless You

Related

Wizard freezes on wake-up while GPRS is AlwaysOn

Hi,
I have MDA Vario version of HTC Wizard.
After a ROM upgrade (to version 2.21.2.11) I have the following problem :
If I set AlwaysOn=1 in the registry, then GPRS is always connected as it should be - but when the device goes out of standby (by pressing (I) button or by an incoming call/message), the keyboard and touch screen do not respond for 10-20s. I can hear beeps when pressing keys but nothing happens (e.g. I cannot pick up a call...). After an annoying while, everything goes back to normal until a next standby-wake up cycle.
I've re-flashed the device with my operator ROM three times already, no other programs are installed (except customization stuff) and still have the same problem.
Before I decide to use some custom ROM, I'd rather try to find some other solution...
Any idea ?
regards
Maciek
AHHH me too
same setting applied and now i can i get a white screen after the tmob boot screen. when i call my phone it dosnt ring but the send & end buttons light up. the green signal indicator light is on too, and thats it. it also sleeps after a few min like normal, but the when i wake it up, the signal light is flashing but the backlight is not on. i really want to figure out how to put a txt file in the root of a card with instructions ot reinstall the backup reg i have. or get an activesync of my favs, list of apps, and outlook. any thoughts would be appreciated.....its my first ppc/wm device (xircom rex 6k --> handera 330 --> sharp zaurus 5500sl --> sharp zaurus 6000l --> HTC Wizard/T-mobile MDA Vario).
Resurrection
Hi - I am having a problem almost identical to the one in the first post. when my phone is in standby something happens which means it does not respond when turned on for about 20seconds, although it will anser a call. it's very annoying if you want to add a date quickly or send a text.
I have turned off gprs always on, removed any storage card plugins, and changed exchange server to only sync the last 3 days instead of everything. I am really a bit confused as tbis problem has only come about since I installed the tmob 2.26 rom and latest uk radio (after unlocking my phone) my phone previously worked fine with the current uk rom but was very slow toboot up. I don't really want to downgrade but i'm not seeing much option rihgt now. did anyone ever solve this?
any help greatly appreciated.
I am not really sure if this is a result of the GPRS ALWAYS ON settings - it just does not look that way!
I had a similar problem without having GPRS always turned on. After I reflashed the phone with exactly the same ROM again everything works fine. Did you booth install the CUSTOM ROM integrated in the flashed ROM as well or did you perform a SOFT RESET before it could install? The reason I ask is because of I think the problem is in the way how the WIZ writes / adds contents to the REGISTRY. It might have been that you resetted the device a bit too fast after HARD RESET or REFLASH and some of your REGISTRY KEYS are messed up!
If you have the possibility to perform a HARD RESET or REFLASH of your device: please try it and see if the problem persists! But please do not reload a backup afterwards because it would import also the faulty registry again ...
Please post your results afterwards, so, others would have a solution in future!
will give that a shot, although I did a completely clean install on this phone - no imported backups etc... is there any tool that can reset my registry to default settings?
the_angry_monkey said:
... is there any tool that can reset my registry to default settings?
Click to expand...
Click to collapse
Not really!
Depending on your phones ROM and CUSTOM ROM your registry will differ from others anyway, so, the only one way to get a 'default registry' is to perform a hard reset.

Wi-Fi is neither on nor off

Hey all,
I somehow managed to screw up my Wi-Fi so it now appears to be turned on, even though it's not. The problem is, I can't turn it on..or off. Comm manager won't work. The Connections icon on the top bar of the today screen shows it as on and connected, when I click the icon the big button seems to let me turn the Wifi off, but when I hide the panel and show it again, it stays the same as before. And the other text on the panel writes "Turn Wi-Fi On". Umm..the last few sentences might look a bit confusing..well I have the Laurentius WM6 ROM (AKU 0.5 update 1 I think) so apart from the standard Turn Wi-Fi On/Off text (that looks like an internet link ), there's also a big button serving the same purpose. And simply put, the button looks as if the Wi-Fi was on, and the "link" as if it was off. I hope you get what I'm trying to say here Anyway, I tried hard-reseting the device and everything got fine again, until I restored my full backup (created by Sprite Backup 5 about a minute before the hard reseting). After that, the WiFi problem is back. Anyone got an idea what it could be caused by or what to do to get rid of it please?
Many thanks, Longlife
Well, the problem is solved, dunno how it happened but now everything works just fine Sorry for bothering :S
Longlife

Bluetooth Dying!

Using a T-Mobile (USA) MDA, HTC Wizard, with the last official T-Mobile ROM, version 2.26.
Just very recently, Bluetooth often stops working, and I cannot get it back on again.
I try various ways of turning it back on. For instance:
1) The BT icon in the tray using the "Battery Status Today plug-in. (Actually I have the newest one, now called "Home Screen Plus Plus".)
2) An app called "Bluetooth Toggle, an icon to click that should switch BT ON and Off.
3) Comm Manager
4) Settings, Connections Tab, Bluetooth settings.
None of those work. In any of them, when I click where ever one should to turn on BT, the screen freezes there, only to be resolved by a soft reboot.
Sometimes on rebooting, BT is working again, but other times not. In fact, for the last several hours today, I have not been able to turn BT on again at all, despite reboots.
Does this sound like a hardware problem, or could it be something that could be resolved through software?
Any suggestions, registry tweaks, etc.?
I guess I could try a hard reset or reflash. But before trying something that drastic, which would require reinstalling all my apps, reconfiguring, etc., I'm wondering if there is something else I can try.
Or, if it's an irrepairable hardware problem, then I should perhaps look for another phone as soon as possible, as I want to have BT. I was waiting though, for a good new 3G WM phone to come out on T-Mobile in the next months. So, I would rather fix the MDA to use for a couple more months, rather than getting a Dash or Shadow now. (Wouldn't get the Wing, as I would prefer my next phone to be smaller and lighter than the MDA.)
Any suggestions on what to try, to see if I can get BT working again?
The change often seems to occur on re-booting. BT is working fine. On re-booting the MDA, BT is off, and I cannot turn it back on, as described above.
However, sometimes on rebooting again, it turns back on.
Any explanation for this?

Stock ROM 1.66 sart wizard

Hello all,
First let me say that i have searched hight and low for some info about this but didn't get anything (not just on this site but the internet in general).
I bought a t-mobile UK HD2 and have used HardSPL to flash stock HTC ROM 1.66.405.2 from the HTC website - so far so good...
Now I have two issues:
First - when i first turn on the phone i didn't get the "welcome wizard" that normally sets up the connections and email accounts etc... Its like the first run screen is hidden and never completes, when I turn off the phone you can briefly see the "learn about the on-screen keyboard" wizard as Manilla closes
Second - each time i restart the phone it turns on the wifi, even when i specifically turned it off.
My thoughts are that the startup wizard never finishes so there are some settings that don't retain each reboot?
I have tried several hard reboots, and used Task29 to format and re-install the rom from scratch, the connection autosetup isn't such a big deal for me as i can run them manually however this phone is mean to be going to my brother and i don't want him to have any problems in future if he has to reset it...
Anyone see this before or have any suggestions?
Bibble said:
Hello all,
First let me say that i have searched hight and low for some info about this but didn't get anything (not just on this site but the internet in general).
I bought a t-mobile UK HD2 and have used HardSPL to flash stock HTC ROM 1.66.405.2 from the HTC website - so far so good...
Now I have two issues:
First - when i first turn on the phone i didn't get the "welcome wizard" that normally sets up the connections and email accounts etc... Its like the first run screen is hidden and never completes, when I turn off the phone you can briefly see the "learn about the on-screen keyboard" wizard as Manilla closes
Second - each time i restart the phone it turns on the wifi, even when i specifically turned it off.
My thoughts are that the startup wizard never finishes so there are some settings that don't retain each reboot?
I have tried several hard reboots, and used Task29 to format and re-install the rom from scratch, the connection autosetup isn't such a big deal for me as i can run them manually however this phone is mean to be going to my brother and i don't want him to have any problems in future if he has to reset it...
Anyone see this before or have any suggestions?
Click to expand...
Click to collapse
Go into comm manager and switch the phone to off wait about a minute then switch it back on again, the setup wizard should appear after that.
Superb thank you,
Fixed on both counts! Is this quite a well know issue then?
Ta
iang123 said:
Go into comm manager and switch the phone to off wait about a minute then switch it back on again, the setup wizard should appear after that.
Click to expand...
Click to collapse
Lol, wow, I was having that problem and just gave up and flashed a cooked rom, didn't bother to ask for a solution. Thanks for posting this
Dizzle said:
Lol, wow, I was having that problem and just gave up and flashed a cooked rom, didn't bother to ask for a solution. Thanks for posting this
Click to expand...
Click to collapse
Na, to be honest I found it by pure fluke! ha ha
Cheers
Ian
Same here. I found the solution completely by accident but the start wizard being hidden in the background was really starting to annoy me. Glad it's sorted now.
DC
Just switching on airplane mode also brings the wizard on top so you can compleate it.
i had same problems and stumbled over this, great help.. thanks!

Problems with WiFi Connectivity Since the Last Update....

Guys,
I updated my tab a few days ago. Now the market looks different but unfortunately I'm facing another irritating problem which I have no clue how to solve.
Every time that I turn off the tab, and let it be idle for 10 minutes, when I turn it back on, the WiFi icon will show no bars - which translates into no internet connectivity. That happens while the WiFi button is still pressed (green in the pop-up menu). In order for the device to connect to the net I need to turn the WiFi OFF and than ON and it works.
I checked the WiFi sleep configuration and they are set to "never turn it off" I also rebooted the device but with no change.
Please let me know what to do... as this thing sometimes just drives me crazy.
Thanks.
Gingi
imgingi said:
Guys,
I updated my tab a few days ago. Now the market looks different but unfortunately I'm facing another irritating problem which I have no clue how to solve.
Every time that I turn off the tab, and let it be idle for 10 minutes, when I turn it back on, the WiFi icon will show no bars - which translates into no internet connectivity. That happens while the WiFi button is still pressed (green in the pop-up menu). In order for the device to connect to the net I need to turn the WiFi OFF and than ON and it works.
I checked the WiFi sleep configuration and they are set to "never turn it off" I also rebooted the device but with no change.
Please let me know what to do... as this thing sometimes just drives me crazy.
Thanks.
Gingi
Click to expand...
Click to collapse
Flash a custom rom bro. Otherwise you are stuck with Samsung's awesome bugs. If you don't want to flash a custom rom there isn't really much you can do about it considering you're not rooted. What did you update to? KMP???
I did the regular Samsung update -the latest one that was released a couple of says ago. The problem with rooting is losing the coverage I have for insuring the device... which I'm reluctant to do. I'm sure it has a solution somewhere...
Yes I confirm.
This "reconnect" issue is being discussed on many forums with no solutions yet. (except custom ROM)

Categories

Resources