HTC 8525 red led not power up - 8525, TyTN, MDA Vario II, JasJam General

hi all, pls anyone knows how can i solve the issue of red led and not power up? i tried to connect first the charger and later put the batt and nothing, the fuzes are good, the batt its ok, i tried the instructions of mike channon and other topics and nothing again... i apreciate the schematics of this model, thks for your time.

I had a red LED on my device ones, that happened when my battery got flat drain. Maybe you can try charging it for an hour or more. Then try it again..

thks for your reply, i tried to charge for > 1 hr. wkth two batt. and nothing, i thing the failure is a component defect. for this i need the service manual for MB repair or schematics for make a plain of conections for determinate the issue.

Just in case... certain non-original batteries seem to have one of their sides made from metal or other conductive material. When such a side touches the metallic frame of the battery holder, here you go - the red light goes on and the phone won't boot up/charge.
I had to put a properly sized piece of paper between the battery and the frame on my Hermes to make it work with such a battery.

i am haveing the same problem but i have a factory battery ,i try changing battery ,maybe this may help it accour when i connected to my laptop to charging it ,it was working find then five mins befor then red light , and not powering back on need help plz

i had this problem for about 3 to 4 weeks nowi try everything different oem batterys , try car chargers , laptop usb charger , dest top charger usb , while chouching on another forum some1 say try rapidly placeing and removing a battery , i try it about 30 times and it worked!
THE RAPID REMOVAL/REINSTALLATION OF THE BATTERY WORKED!!!

Related

Dead magician...? Red light!

Hi all,
Need som urgent help. The backcover of my device is not fitting well any longer. Guess I´ve bumped it to many times...
As a result (Iguess) I cant turn on or even charge my magician!
The only thing that is happening when I try to charge is that a red light is turned on. What does this mean?
Any solution of how to get it work again?
Is it possible to buy a new back-cover? Live in Sweden.
Thankful for some ideas!
Regards Emil
Most probably the notch on the battery cover that hits the microswitch lever has broken. You will find the microswitch on the lower-right corner of the device when facing down. Put something soft but strong enough (ie. foam) to keep the microswitch in the ON postion then mount the battery cover and temporarily fix it with tape. Be sure to keep your device plugged in via USB or charger in order not to totally discharge the backup battery. If the backup battery gets depleated, then it's like doing a hard reset.
You can buy parts from ebay but I've always bought from Brando and is very reliable dealer (shop.brando.com.hk). Delivery is quite fast too.
Hi Zerimar and thanks for your answer!
Unfortunately that didn´t do the trick. Still the same red light when trying to charge. And I can´t turn it on! I am pretty sure that the battery is flat out by now but even so I would think it would load and then after a while, I would be able to turn it on.
Am really frustrated abt this!
Any more ideas maybe?!?
Regards Emil
u'd better send it to service...
BoomerCE said:
u'd better send it to service...
Click to expand...
Click to collapse
Well, that´s what I´m trying to get around... Thats why I´m hanging around here
If have have my device charged via USB or charger, the LED becomes as soon as I remove the battery cover. If I hit the microswitch lever then the LED turns green and start to boot up. If main battery is removed the LED stays red even though hitting the microswitch's lever.
It looks like it's not charging your main battery or your battery is already defective. If your device is over a year old and you're still using the same battery, then its time to change it. Bulges in a battery is a sign that it needs replacement.
Before sending your device for repair, why not look for someone you know who also has a Magician or equivalent device and quickly borrow his/her battery?
I had red LED when plugging into a main charger - and then the phone reset.
Red LED + loop booting-poweroff = dead battery
If the LED is RED when you charge your device for hours
If the device tries to boot sometimes, but powers off by itself some minutes after (it means, at least, that your device CAN boot! )
Your battery may be dead, I bought a new one for 10Euros on ebay...
Those batteries are perfectly compatible with HTC Prophet or HTC Beetles (Ipaq 6515) and maybe other devices... easy to find!

Hermes SPVM3100 Not Turning On

hi ive tried this:
"Problem 6: Device doesn't turn on, shows red LED only
In this case you can try:
Remove battery
Connect Hermes to charger or USB
Insert the battery while Hermes is connected to charger
Red light should turn Amber
Soft Reset "
but i dnt get any lights coming on it was working last nyt and i took a call after the call finished i put it on standby and i went to use it 20 mins later and it wasnt turning on ive done a soft reset nothing happened, cant do a hard reset and the above witrh the charger or usb didnt work anybody know wat might hav happened i havent done any upgrades its a standard m3100 from orange
mrcopyright said:
hi ive tried this:
"Problem 6: Device doesn't turn on, shows red LED only
In this case you can try:
Remove battery
Connect Hermes to charger or USB
Insert the battery while Hermes is connected to charger
Red light should turn Amber
Soft Reset "
but i dnt get any lights coming on it was working last nyt and i took a call after the call finished i put it on standby and i went to use it 20 mins later and it wasnt turning on ive done a soft reset nothing happened, cant do a hard reset and the above witrh the charger or usb didnt work anybody know wat might hav happened i havent done any upgrades its a standard m3100 from orange
Click to expand...
Click to collapse
The problem appears to be caused when battery has more or less zero charge and perhaps fooling the charging circuitry into not recognising a battery is in place.
So - Force charge the battery without the Charger
If your problems remain you could always try the following to manually charge the battery a little (enough to let the Hermes know the battery is present when you put it back in) credit for this goes to triposte as the following is adapted from his suggestion:
Those with a basic knowledge of circuitry and things technical will fair better with this solution. The electrical contacts are all important, poor contacts will render this a worthless exercise.
I leave it to you to decide how you connect the wires. If you have no other means you could enlist the help of someone to hold the batteries and wires together while you connect to the Hermes battery!
1) Remove the battery from the phone!
2) Take 3 fresh AAA batteries in series (total 3 x 1.5V = 4.5V)
3) Connected the (+) wire to (+) on the battery
4) Connected the (-) wire to (-) on the battery
5) Hold this in place for 60 seconds.(possibly longer you are trying to charge it enough for charging circuitry to recognise there is a battery installed.)
6) Put the battery in your phone
7) Switch on phone and start charging (via USB)
Hopefully you will get the Amber charging light.
It may be worth repeating this a few times if not successful on the first try.
Warning - Do not connect a mains based transformer to the battery with an incorrect charge rate (mAh) and voltage (V). Any attempt to force charge using mains transformers could be extremely hazardous (explosive). Only a qualified/competent person should attempt to charge the battery in this way. Similarly, even if you are using batteries to do this task, do not leave them connected for more than a few minutes and stop immediately if either set of batteries become warm.
If the problem persists it is worth re-trying the solution you mentioned in your post as well as the above, before giving up.
The final resort - a new battery.
Mike
hi ive tried wat you hav asked but still not red light or amber ligh it shws no light at all i dnt understand how its gone from working 1 minute to completely not working in another
mrcopyright said:
hi ive tried wat you hav asked but still not red light or amber ligh it shws no light at all i dnt understand how its gone from working 1 minute to completely not working in another
Click to expand...
Click to collapse
Yes, I know. It has been reported by quite a few and is actually quite a common problem (relatively speaking) across several phone brands and types.
The solutions you have tried have worked for some, not all. One or two found that it randomly (seemingly) just started charging again.
Your problem is whether to return the device as defective (hopefully under warranty) or whether to chance just getting a new battery. A battery will be fine if it is the usual battery problem, but if not then you'd have wasted money. If you have access to a retailer where you could access a battery just to test it that would be ideal.
Mike
I seem to remember having the same (similar?) problem on my old Universal - I think the solution in that case was to take the battery out for 10 minutes, then put it back in and then connect the phone up to the mains charger, rather than to the USB connection on your PC. The phone needed to be left off (not difficult with a completely flat battery ) and then seemed to charge....
Just a thought, not sure if it's been tried in this case?
Mark.

Notification LED red.....MDA dead

Help....seems that my Magician is dead....making a long phone call (1 h) after call end, display switch off and Notification led become fix Blue (bluethoot was off) and then i try to hard reset. Led switch off and no results. I try then to put the power supply cable and the led become RED.... !!! (neve seen red.....) pda is not switching on anymore...any details on the reason of this RED light ???....please.....
thanks in advance
Red LED means the battery isn't connected or the device can't charge.
Try taking the battery out for a few hours and try to switch the device on again.
My brother in-law had the red LED issue too, we solved it by 'kick starting' the battery with two wires and a 9v battery. (At your own risk of course).
Good luck!
helterskelter said:
Red LED means the battery isn't connected or the device can't charge.
Try taking the battery out for a few hours and try to switch the device on again.
My brother in-law had the red LED issue too, we solved it by 'kick starting' the battery with two wires and a 9v battery. (At your own risk of course).
Good luck!
Click to expand...
Click to collapse
Red Led doesn't mean that the battery is not connect with the device. It simply means the cover is not properly intact. Try taking out the battery off the device, put it back in the slot. Place the cover carefully and completely. And then connect the device to AC power supply. It would definitely come *alive*
still dead....grrrr
so cover is ok...it seems to be properly fixed, even the smal swithch that create some unwanted crash few months ago is now working properly...
i made a 1 h long phone call with battery and charger (usb from pc) and after line felt down, bluetooth led blue on (was off) and screen with phone but no changement by touching it. so switch off by power off and ...dead...now without battery but with charger (or usb from PC) RED led on. With batttery AND charger RED on, and with battery all dead. i cannot reset anyhow with or without battery /charger....need it...sh*t.....(ops...sorry)
thanks a lot anyway....
omino_ribelle said:
so cover is ok...it seems to be properly fixed, even the smal swithch that create some unwanted crash few months ago is now working properly...
i made a 1 h long phone call with battery and charger (usb from pc) and after line felt down, bluetooth led blue on (was off) and screen with phone but no changement by touching it. so switch off by power off and ...dead...now without battery but with charger (or usb from PC) RED led on. With batttery AND charger RED on, and with battery all dead. i cannot reset anyhow with or without battery /charger....need it...sh*t.....(ops...sorry)
thanks a lot anyway....
Click to expand...
Click to collapse
what I will suggest is, you should get a new battery instead!!
Got the same problem now!
Both my wife and me got a Magician. Hers is dead now - same symptoms.
First guess was dead battery as well. But I exchanged it with mine fully loaded. No difference!
Usually when you plug the powercord into the device orange flashes up and device boots. Here nothing happens.
I'll have some electrician have a look at both. Maybe he can find the fault by comparison. But I don't expect a lucky outcome.
on back side of ur device when u remove the battery cover, u see a small black switch on the right side just next to the battery.
put the device on charge..with cover off---it will show red light contunuously on.
now manually press gently that black switch and see if ur device starts to charge.
if u see a yellow light any point of time doing this u may have to get this little switch repaired or do a temporary work urself by kepping it at place manually bu something.
try and tell
Now it works!
I think we all knew about that little switch. But thanks for your thoughts.
Anyway, hers is running again!
Two days ago I took it fully apart. No obvious fault noticeable. I left it the way it was now to prepare it for shipping. Today my wife asked me I should try it just once again. So I held the battery on the connector and plugged the USB cable and then: it booted!
But the internal battery doesn't seem to recover. It stays at 0% (1h "charging" since then).
I have to correct myself: Even the internal battery is charging (but it takes its time).
my magician is also dead and just the red LED is burning when i put it in the USB! Can anybody help me?
Still ned solution!
Can some one who was having the same problem help?
your device battery detector switch(little switch) is broken or logged-out of Main Board.
when it broken,the red LED is on at all.
it is the greatest weakness of magician...
z_qz54 said:
your device battery detector switch(little switch) is broken or logged-out of Main Board.
when it broken,the red LED is on at all.
it is the greatest weakness of magician...
Click to expand...
Click to collapse
i am opening my jam case,bring the switch out and conecting sides of switch by a piece of wire.now a day there no problem with openning the battery case or.. but my WM cant recognize the battery level.it's alway 0%.and even the charger is connected no orange led i can see.but the charger charge the battery and battery works for more than one day!!!!!!!!
any one with the same problem!????
or any one having solution!
REGARDS
I'm gettingn red led light too when charging from wall outlet. Charging from usb is fine. a weird thing is when my battery came down to 50%, imate jam will shut down and won't successfully reboot. some people from this form mentioned it's an indicator that the battery is dying.

Help, Technical problem.

When turning on my trinity, I have the welcome screen "running" up and having a white stripe in the middle, well just look at the picture.
I just cant turn on my trinity.
If somone have idea how to fix this, please.
thanks in advance.
I'm having the exact same problem for weeks now!!
The first thing i tried was removing the sd card, and replacing the battery,
this seems to fix the problem for a small period of time (up to 1 day).
Don't be fooled, the problem will return when you need your phone the most
Reflashing the device with the same/different ROM has no effect!
Being an electronics engineer, i carefully checked all the connectors inside the screen, and everything is connected as it should be..
If anyone has any suggestions.... ?
Sjerby, one thing you can try to temporary revive your phone is this:
-Remove the back cover and take out the battery
-Plug in the charger, do NOT use the usb cable!!
-Put the battery back in, but don't try to power on the phone
-Leave the phone to charge for at least 20-30min
-Power it back on. You might have to push the power button twice for it to respond.
My findings are that the device somehow uses more power than the battery can
supply, but using a brand new fully charged original battery does not fix the problem!
ummm... the phone DOES work once in a while but it get stuck fast after, somtimes it just show's a black screen.
and i have no charger i use usb cable to charge it, i forgot the charger in a vecation ><
and just for the record the camera is having problems aswell if it makes to turn on

Prophet won't power on.

Hi i have a problem. Yesterday my Prophet battery goes to 0%, when i back to the home I plug-in it to charger. The light-emitting diode start flashing, but i can't turn on my phone. After 8 hours connected to charger Prophet still won't work. DO you have any idea? Maybe this is battery problem?
PS. Sorry for my poor english.
same with me,my dopod 818 pro won't turn on after 2 month not use,i try to charge,but the led not light..its off..i have no idea witn this problem,please help me to solve.thanks
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
errhec said:
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
Click to expand...
Click to collapse
Oh.. great! do you know which pin of the battery is (+) and which pin is (-) pole? I want to charge the battery by a balance charger.
happened to me couple months ago
and i used desktop charger for 5 minutes directly on the battery
then plug it in and charged normally with usb connector
used the desktop charger on the first and last pins on the battery
Hello, i'm sorry, my english is bad. but i wanna help.
Now, before 1 week i have the same problem, my qtek s200 after update whit wm6.1. OK 1 month everything was ok, but after that /i don't now where i go wrong but no matter/ that my phone start stuck in bootloader. I let it one night on to see, maybe will turn,and at the morning he wont start, even the light wont start wen i put the carger on. I take one charger/from sony erricson/ cut cable, there are 2 cables, take off the battery of my pda, put directly cables from sony charger in to battery, black is minus, red is plus, but don't worry, there is no problem if you make mistake.Let it like that 1-2 hours, put battery back on pda and everything will be OK.Now in my case my ROM fu** up, i go to tree color screen/see more info how to do that/ and replace the ROM.and next time do not full dry the battery.Hope i help.

Categories

Resources