Hello,
i suppose my previous threat was not the right question. is anyone out there who can axplain me what i a doing wrong? aftter connecting my mda to my pc with active sync 4.5, i unlocked my mda. the ipl/spl is 2.26.001, so far do good. the i try to install wm 6.5 (RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship). the installation starts and after 2-3 minutes i get the message: "error 260, try to connect youre device etcetera."
what is the final step? can someone explain me?
groet
Martien
martinuspetrus said:
Hello,
i suppose my previous threat was not the right question. is anyone out there who can axplain me what i a doing wrong? aftter connecting my mda to my pc with active sync 4.5, i unlocked my mda. the ipl/spl is 2.26.001, so far do good. the i try to install wm 6.5 (RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship). the installation starts and after 2-3 minutes i get the message: "error 260, try to connect youre device etcetera."
what is the final step? can someone explain me?
groet
Martien
Click to expand...
Click to collapse
For starters, you are in the wrong section of the forum. The MDA Vario (Wizard) is a different device. This is the section for the Wallaby (XDA, MDA, etc).
As far as your problem, your battery could be dying. Also, considering the fact that you posted this in the wrong section, I would strongly suggest that you are flashing the rom from the correct device (in the case of the Wizard is as simple as making sure that you are flashing a G3 or a G4 to its respective device).
Head over to the Wizard forums, you will certainly get more help there.
Good luck!
Related
Hi guys, at the mo i have my phone in boot loader with the 4 colours and usb on the bottom left..
i am looking for the rom file.....currently i have tried using : -
Qtek_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe from ftp://xda-developers.com/Uploads/HTC_Wizard/Roms/Qtek/ but when i load it says
'The application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem'
have also tried the T-mobile one and it says the same thing as above
so what do i do now?????????? someone please give me a direct link to the correct file as i cnt find it ne where
thanks
?? anyone please...
According to the Northern Hill Software web site, these kind of RAPI.dll errors can occur because you don't have ActiveSync installed on your PC (or your installation is corrupt).
Man, serious déja vu... I'm POSITIVE I've had this same discussion with someone else in the past on these forums before. :S
Hi,
I also experienced this problem. But after disconnecting the usb connection and after soft resetting the mda the old installed version worked again.
For me the problem was that i didn't unlocked the CID. I first had to unlock the CID (with the MDA vario) to be able to update an other rom.
Hey guys,
A friend told me to instal the new wm6 rom on my mda vario. I downloaded the rom but i forget to CID unlock it. When i start my mda i only see the tri-collor screen with:
above: IPL 1.06
in the right upper corner: RUU
a little above the middle: SPL 1.06
When i connect my mda with my computer my computer recognises the mda, i hear a tone and usb apears on the mda but active sync doenst show the connection
My problem now is:
I cant start the mda, i think i lost my old roms and the mda is useless now.
Please folks try to help me i realy need this mda for my work and im hopeless without it. When is start the MDA i just see the screen and i cant do anything but looking to that screen. the touch screen doesnt work and the keys neither.
Is there a solution to CID unlock my mda or to connect it with active sync so i can get in the folders or something and then install the older roms or so.
PLEAZ GUYS!
Thomas,
Thanks.
tommygreece said:
Hey guys,
A friend told me to instal the new wm6 rom on my mda vario. I downloaded the rom but i forget to CID unlock it. When i start my mda i only see the tri-collor screen with:
above: IPL 1.06
in the right upper corner: RUU
a little above the middle: SPL 1.06
When i connect my mda with my computer my computer recognises the mda, i hear a tone and usb apears on the mda but active sync doenst show the connection
My problem now is:
I cant start the mda, i think i lost my old roms and the mda is useless now.
Please folks try to help me i realy need this mda for my work and im hopeless without it. When is start the MDA i just see the screen and i cant do anything but looking to that screen. the touch screen doesnt work and the keys neither.
Is there a solution to CID unlock my mda or to connect it with active sync so i can get in the folders or something and then install the older roms or so.
PLEAZ GUYS!
Thomas,
Thanks.
Click to expand...
Click to collapse
you should be in the Wizard Upgrading, etc. thread.
You could be in 1 of 2 possible situations:
1. Your phone was a G4 and you flashed G3 bootloaders into it and now it is a fully fledged brick. (hope this isn't the case, but this happens when people jump in and don't read first)
2. Your battery is probably dead. You should have read before you jumped in. Have your friend recharge your battery since they seem to know so much about what you should be doing with your phone. If your friend doesn't have the same phone and already completed these procedures then you shouldn't have been listening to them in the first place. If you can't get your battery charged this way then you will have to buy one from a store that sells the phone or on ebay.
you will need to re-flash the button rom and complete the unlock. Then make sure you DO step 17 BEFORE you flash your WM6 rom or you will still be in a world of crap.
If you don't know what I mean by step 17 then go to the forum I mentioned above and look for a thread near the top that is Tagged with [READ FIRST]
Read that and you will be good. You need to talk to your friend and make sure that the next time they "help" someone they make sure to give them ALL of the information they need before they start trying to turn their expensive toy into a plastic paperweight.
Hello Guys
I have a problem.
I have a Qtek 8100 (with the music buttons). I should downgrade it back to Windows Mobile 2003 SE. The first problem is, that i can't find any official rom.
Then the second problem is, that all other cooked roms like wm5 or wm6 roms don't work at all. So the device starts up, but then i can't do anything, not even go to the menu.
And this problem goes into the next problem. I can't establish a connection with active sync... I don't know, but it doesen't try to connect.
But I can tell you what is working:
I can update the phone to wm5 or wm6 with the mtty 1.42, but then the roms don't work.
First: Does anybody have the official qtek 8100 rom or does know where to get it?
Second: Why can I not connect with active sync?
Please I need your help!
Thank you!
Sorry, i know there so many posts about this problem, but i can't understand it very well, sorry for that.
Here's my problem:
The JasJam that i have says "No GSM", so i tried to fix it, i searched the net for possible solutions, so luckily i found one, well i thought that was the answer, unfortunately i think i downloaded SPL version 7 (which i think is not the right thing to do) then when i was upgrading it, "tricolour bootloader" appears, and then next screen was loading and it is 0%.. then the ERROR #somethng appear, and it stucked on the tricolour bootloader, i tried to fix it again, i tried to upgrade the ROM, SPL, and all because im so hopeless already. Next problem is ActiveSync 4.5 can't detect the jasjam, i tried everything, different PC, laptop and different USB cable as well, i update its .NET framework also, but still there's no connection..
Please HeLp!
I need it badly, please do it step by step, i really really need it please
THANKS IN ADVANCE!
Useful Links:
http://forum.xda-developers.com/showthread.php?t=369434
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Mike
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
soriyn said:
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
Click to expand...
Click to collapse
turn off the device and disconnect the battery as well sim card........ leave without sim card and plug it back battery then take away your device into bootloader mode to reflash again