Hello Guys
I have a problem.
I have a Qtek 8100 (with the music buttons). I should downgrade it back to Windows Mobile 2003 SE. The first problem is, that i can't find any official rom.
Then the second problem is, that all other cooked roms like wm5 or wm6 roms don't work at all. So the device starts up, but then i can't do anything, not even go to the menu.
And this problem goes into the next problem. I can't establish a connection with active sync... I don't know, but it doesen't try to connect.
But I can tell you what is working:
I can update the phone to wm5 or wm6 with the mtty 1.42, but then the roms don't work.
First: Does anybody have the official qtek 8100 rom or does know where to get it?
Second: Why can I not connect with active sync?
Please I need your help!
Thank you!
Related
please help! I have made a wrong ROM Update for my Artemis. The result is that it doeasn`t starts anymore. I see only the start screen no more. If i make a SW or HW reset tahn i see a 3 colored screen and USB. But i don`t get a connection via usb to my compute`! How can i wake up my Artemis ???
tell use more what did you do and how did you do it?
what artemis is it?
what rom was it
Flash went sour..
You need the original ROM which was on your device when you bought it. What version (HTC, MDA, etc..) and what language was the original ROM?
please i need help too
I guess I made the same or a similar mistake that dr.moppi did. My machine is a Dopod P800 from mainland china with the chinese operating system. I flahsed it with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap. Don't really remember what the original ROM was but now when i turn it on it freezes when it lights up. On the screen, it says
IPL 1.27.0001
SPL 1.27.0000
GSM 02.67.90
OS 1.28.0.0
DOPOD
I don't get a connection through usb to the computer either. I am not sure if I did the hard reset correctly. Didn't understand the instruction on that "press the soft key left and right and soft reset at the same time." Anyway, you guys are all experts, can you help me please?
it should be the same as my problem
if i remeber than i used the same ROM Update :-(
I hope anyone could give us a solution, please.
@dr. moppi we can only help you if we know what version you had before.
@empathyvirus you have to look for the original ROM which, in your case, should be the Chinese Dopod ROM. Install that one and your good to go.
Without the original ROM the only thing left to do is: sending your device to your provider or contact and sent it to the guys of imei-check. Either way, you'll probably have to pay to get it fixed.
how to install original rom
Thanks for your quick reply Pyth. In the case I get the original ROM from somewhere, how do I install it if I can't get a connection between the phone and my computer? Can you advice?
Put your device in bootloader by pressing the record button and reset at the same time. If you have your USB-cable connected between your PC and your phone it will indicate a connection by 'USB' in the left corner of your device. Now you should be able to run the ROM executable and update your device.
thanks anyway
i tried but it didn't seem to work. anyway, i have troubled you enough and maybe it's best i just go to the repair centre of dopod and pay for a fix. i really appreciate your help though Pyth.
Where can i find the t-mobile rom its the MDA Compact III that wont start for me
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
OCRAM00 said:
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
Click to expand...
Click to collapse
First off, update your Activesync to 4.5. Activesync shouldn't "connect" when in bootloader mode, however you can flash ROMs if you're device is connected in bootloader mode. You can also run the RUU after installing the modified SPLs needed.
Ignoring the first issue of connection, you can't actually achieve your stated aim of upgrading an Alpine to WM6 anyway, no such ROM exists.
hi, i've found and download a rom of wm6.1 to alpine 2020i and also a wm6.5.
I've tried with the activesync 4.5 and still the same error, i dont understand why it wont erase the rom to install new one
i like to see this rom give mi link or info wher to find it. i well try to instal yt on my xda IIi
be2nzs
hi guys, i have problem to upgrade my alphine, i just want wm 6.5 runing on my device, can anybody help me ? i am sorry for my english.
I face a strange problem on my dopod 818pro after I donwgrade from wm6.5 back to wm5 NVID rom.It take about 5 minuets to boot back to the windows,even thought i did several time of hard reset it is d same too. Does anyone encounter with this kind of problem before? Please advice.
No sifus can HELP???
Finally I solved d problem liao by upgrading back to wm6.5 Build 23053 WWE bikertibi edition.
Help <urgently needed
Hi everyone,
I tried to upgrade my HTC universal from WM 5 to WM 6.5 using the rom provided by xda v1.01 (128MB rom).
I tried to install the upgrade from my laptop but during the process i noticed a sound indicating that the USB connection was lost. Now all i can see in my phone is 'Serial' at the top and 'v1.01' at the top. Aside that, the phone's literally DEAD.
Is there anything I can do about the phone or is it wasted?
Would appreciate any form of response.
Thanks.
Hello,
i suppose my previous threat was not the right question. is anyone out there who can axplain me what i a doing wrong? aftter connecting my mda to my pc with active sync 4.5, i unlocked my mda. the ipl/spl is 2.26.001, so far do good. the i try to install wm 6.5 (RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship). the installation starts and after 2-3 minutes i get the message: "error 260, try to connect youre device etcetera."
what is the final step? can someone explain me?
groet
Martien
martinuspetrus said:
Hello,
i suppose my previous threat was not the right question. is anyone out there who can axplain me what i a doing wrong? aftter connecting my mda to my pc with active sync 4.5, i unlocked my mda. the ipl/spl is 2.26.001, so far do good. the i try to install wm 6.5 (RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship). the installation starts and after 2-3 minutes i get the message: "error 260, try to connect youre device etcetera."
what is the final step? can someone explain me?
groet
Martien
Click to expand...
Click to collapse
For starters, you are in the wrong section of the forum. The MDA Vario (Wizard) is a different device. This is the section for the Wallaby (XDA, MDA, etc).
As far as your problem, your battery could be dying. Also, considering the fact that you posted this in the wrong section, I would strongly suggest that you are flashing the rom from the correct device (in the case of the Wizard is as simple as making sure that you are flashing a G3 or a G4 to its respective device).
Head over to the Wizard forums, you will certainly get more help there.
Good luck!
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
soriyn said:
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
Click to expand...
Click to collapse
turn off the device and disconnect the battery as well sim card........ leave without sim card and plug it back battery then take away your device into bootloader mode to reflash again​