Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
OCRAM00 said:
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
Click to expand...
Click to collapse
First off, update your Activesync to 4.5. Activesync shouldn't "connect" when in bootloader mode, however you can flash ROMs if you're device is connected in bootloader mode. You can also run the RUU after installing the modified SPLs needed.
Ignoring the first issue of connection, you can't actually achieve your stated aim of upgrading an Alpine to WM6 anyway, no such ROM exists.
hi, i've found and download a rom of wm6.1 to alpine 2020i and also a wm6.5.
I've tried with the activesync 4.5 and still the same error, i dont understand why it wont erase the rom to install new one
i like to see this rom give mi link or info wher to find it. i well try to instal yt on my xda IIi
be2nzs
hi guys, i have problem to upgrade my alphine, i just want wm 6.5 runing on my device, can anybody help me ? i am sorry for my english.
Related
I install WM6 RUU_BA_xplode_WWE_6.00.00.exe but when I wanna install hemi WM6 or WM5 show me error 150.
what device do you have?
Did you killed activesync and put your device into bootloader mode before running the upgrade utility?
Thanks xplode I don't killed activesync.
I have 2 suggestion here because I've faced the same problem before.
1. Try other rom
2. Replace your battery
Hello Guys
I have a problem.
I have a Qtek 8100 (with the music buttons). I should downgrade it back to Windows Mobile 2003 SE. The first problem is, that i can't find any official rom.
Then the second problem is, that all other cooked roms like wm5 or wm6 roms don't work at all. So the device starts up, but then i can't do anything, not even go to the menu.
And this problem goes into the next problem. I can't establish a connection with active sync... I don't know, but it doesen't try to connect.
But I can tell you what is working:
I can update the phone to wm5 or wm6 with the mtty 1.42, but then the roms don't work.
First: Does anybody have the official qtek 8100 rom or does know where to get it?
Second: Why can I not connect with active sync?
Please I need your help!
Thank you!
hi all and artemis experts..
i have a p3300 ( spv m650) phone is dead.. not power on.. only goes to bootloader mode..when i try to upgrade it gives error on percent 3..
what can be problem..? what is the mistake..? whan is the way for upgrading htc artemis..?
thanx alot...
nobody has any idea..?
still i m waiting...
Hi,
i've got the same problem error 270.. Did you find a sollution?
i have this message too , i'm tired of searching a solution !
U should flash your devices official rom.
How to flash back to the original ROM?
I have the solution.
Are you using Windows Vista or XP. In Vista, there are problems while upgrading rom. When I was trying to upgrade the Rom in Windows Vista, It stopped the the upgrading at 3%, but then I read a post and thought to upgrade in Windows XP. It was alright.
The thing left is that your mobile does not switches on, you can see this post.
http://forum.xda-developers.com/showthread.php?t=311403
The above one is to install the Uspl.
http://forum.xda-developers.com/showthread.php?t=306904
And this one is for your bricked device.
As your device is bricked s you should enter the bootloader by pressing the Voice Speed Dial Button and soft Reset and dont forget to do this in Windows XP.
Hope this Helps you.
Thanks,
Talha Qasim
To flash to the original WM5 Rom, Download this Rom from rapidshare.com
http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dont forget to install the USPL through this thread:
http://forum.xda-developers.com/showthread.php?t=311403
And this also that you are using Windows XP.
Thanks,
Talha
To install the original WM5 Rom, Download this Rom:
http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dont forget to install the USPL through this thread:
http://forum.xda-developers.com/showthread.php?t=311403
And this also that you are using Windows XP.
Thanks,
Talha
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
soriyn said:
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
Click to expand...
Click to collapse
turn off the device and disconnect the battery as well sim card........ leave without sim card and plug it back battery then take away your device into bootloader mode to reflash again​