I install WM6 RUU_BA_xplode_WWE_6.00.00.exe but when I wanna install hemi WM6 or WM5 show me error 150.
what device do you have?
Did you killed activesync and put your device into bootloader mode before running the upgrade utility?
Thanks xplode I don't killed activesync.
I have 2 suggestion here because I've faced the same problem before.
1. Try other rom
2. Replace your battery
Related
Hi there, my G4 qtek is stuck on the splash screen. It happened when I was flashing it and it got disrupted.
I have tried flashing it with the original software whilst in bootloader mode, activesync process terminated and no sd card or antivirus software running.
Does anyone have any pointers?
Thanks!
Will
Have you tried the wizard love rom?
no - what will that supposedly do?
Just make sure that your battery is fully charged! ActiveSync shouldn't bother, so, there is no need to deactivate it!
Unpack your shipped ROM with WinRAR, get the nbf file and try to use the noid flash utility for the flashing process! (The noid upgrade utility should be part of Molski.Biz HTC Wizard Custom Rom Cooking Pack at www.molski.biz
Hello,
I have an unblocked SPV M560 (HTC3300).
Few weeks ago I have installed the B&B rom with WM6 on it. Now I would like to install the adinfinitum rom (http://www.adinfinitum.fr/wm6_gps_m6...d_and_the_ugly) to solve the GPS problem we can have with the M650 but I cannot flash anymore.
Here are some explanations:
After starting "start_uspl.exe" I get the Linux screen then the RUU application starts on my PC. RUU is trying to connect to the device but after few seconds it displays the error "ERROR[260]: Update error".
After this I tried to restart the pda, wait for Activesync connection and try to restart RUU.
This time RUU can connect, I can see the grey screen on the PDA and it starts updating... but after 2% I get a black screen on the PDA and RUU displays the error "ERROR[270] Update error".
I'm now reading this forum since 2 days and saw that other people already had this problem but I did not find any working solution.
Does anyone of you have an idea of what can I do to solve this problem?s
Thanks in advance for your help.
Alain.
REad this...
Remove sim and mem card from phone use clear storage to clean phone memory then again try start_uspl.exe wait to 100% finsh do not disconect phone and run then romupdateutility i hope that this can help mine problem is resolved and i flash spv m650 many times.
Hi, i have similary problem, when i try re-install WM on my xda orbit 3.15.118 i have alert : flashing error check your update utility..when i try install another WM6 i have alert : error 270:update error
battery full charged
anyone help me ;-)
Hi,
I finally managed to do the update. The only difference is that when RUU has started after getting the black screen I clicked on the cancel button.
After this I let the terminal with this black screen for few minutes (about 5 minutes) and starts again the RUU application.
And this time is works... don't ask my why, maybe it takes some time to the terminal to be ready to accept connections. At least now SPL 1.1 is installed and I can upgrade. My GPS is now working
Thanks
Alain
Spv m650 arte100
when i run the start_uspl.exe i have this window after the run
No Device Connected
Would You like to try copy again?
YES NO CANCEL
boy my SPV is in bootloader mode and i can't riun it in different mode
i have IPL 3.15.0001 and SPL 3.15.0000
What i have to do ???
PLEASE HELP ME
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
OCRAM00 said:
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
Click to expand...
Click to collapse
First off, update your Activesync to 4.5. Activesync shouldn't "connect" when in bootloader mode, however you can flash ROMs if you're device is connected in bootloader mode. You can also run the RUU after installing the modified SPLs needed.
Ignoring the first issue of connection, you can't actually achieve your stated aim of upgrading an Alpine to WM6 anyway, no such ROM exists.
hi, i've found and download a rom of wm6.1 to alpine 2020i and also a wm6.5.
I've tried with the activesync 4.5 and still the same error, i dont understand why it wont erase the rom to install new one
i like to see this rom give mi link or info wher to find it. i well try to instal yt on my xda IIi
be2nzs
hi guys, i have problem to upgrade my alphine, i just want wm 6.5 runing on my device, can anybody help me ? i am sorry for my english.
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox
When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Mod. edit: not dev related, moved to general
gl though
marcin-25 said:
When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Click to expand...
Click to collapse
I had same problem. I just remove battery and wait sometime. It should fix that. Well.. for me it fixed
Yes it's works, but is any chance to fixed it, upgrade new rom or something.
Prapably someone tryied upgrade bigstoragerom. If i could have backup rom, that's no problem, but i don't have. Other rom not start from sd card
I installed WWE 03, because it don't change radio. There was my problem. When I tryed to install roms before i change radio to 1.12 and wwe 03 work fine. So try like I do But you need install via usb cable and windows xp like i do (I don't have windows xp in my pc so I used Vmware workstation)
What's that rom WWE 03? I have 1.00.10 radio, rom 1.13.00 WWE, so? Could you send me working rom, who can flash my pda?
WWE 03 is cotulla rom. It had windows mobile 6.1. And I tryed to install this one, but lot time had errors. Firstly, I try to install this rom and I finaly upgraded radio with this rom 1.12, but OS installation stuck on 0%, so I cancel it. Noww I tried install this rom and everything working. No bootloader after soft reset, working good
Whitch rom you upgrade radio? your link not work I try to install WWE 03, but. i run upgrade.exe, next : your device software is about to be upadte from: (empty) to: (empty) . I click upgrade and here Checing the inforamtion on your device ... please wait, and i'm waiting sooo long :/ nothing change. I think that i must upgrade radio to 1.12, but how? I try many way
First link should work. It work for me. To succesfuly check your devise you should connect pc and PDA via active syns with windows XP. Then it will check your device and upgrade should work for me it worked
I have connected pda (windows xp) activesyns. Always, every rom, whitch i want to upgrade: update from: (empty) to: (empty). Only if i turn ON pda, then upgrade from: 1.0.10 to 1.12, click NEXT and pda goes to bootloader. "checking devace data" and nothing happened. I thing the last chance is upgrade rom from sd card in bootloader mode, but it must be backup rom from own pda This is the end :/ i may throw my megican to trash. Thanks for answers.
You should turn on PDA then connect to pc after that will be upgrade from to filled. When you click next automaticly go to bootloader and install new rom
Yes, i try that. Turn on, connect, upgrade, then pda goes to bootloader mode and nothing happened - "checking device infromation ...... " all the time. Do you know any way to upgrade from the sd card. I can't do a backup and change 416 bytes in new roms, like a say xda-developers tutorial. Without that pda not flash new rom from sd.
If you know anyone from your friends that have magician try get backup from him. If you don't have, last thing that I can advise, try other roms. You can find it there