Database Users

has anyone able to reset the call timer on the universal????

if yes please can someone tell me how to do it?
and yes i have tried the old trick which we use on the xda2, mini, and ba,
but it din't work on the jasjar.
your help is needed guru's
thank's in advance.

Hmm.. the call timer on my O2 Exec got auto reset after I performed a hard reset for some reason... Is it supposed NOT to do that?

re,
no it is not suppose to do that.
man you are lucky.
haven't tried the hard reset yet.
how do you hard reset it?
i guess the same old way power + reset.
am i right?

Hard Reset
Hit the two "-" on the keyboard and the reset at the same time

If you do a hard reset and a rom update to the radio I know it will reset the timer.

bps725 said:
If you do a hard reset and a rom update to the radio I know it will reset the timer.
Click to expand...
Click to collapse
I made a ROM upgrade for the radio and a hard reset in the same time, but the timers are not reset.
Regards,

I will work on it tonight and try to build a cab if I can find all the files

Oh yeah, I DID upgrade the radio ROM at the time of hard reset, and the timer DID reset for me

I have done a ROM upgrade several times on my Jasjar. In fact once I have also chnaged it to the O2 Executive and back to the Jasjar but under no circumstances did the call timer reset itself. Personally I think it is not possible by the user.

White Screen only

I just installed this program, used default settings, apllied, My 8125 soft reset.
Now I cannot see anthing past the initial screen that lists IPL and SPL version.
Just a plain white screen, Active sync wont work, no buttons work. Please help !!!!!!!!!!

If you're stuck I think the only next step would be a hard reset which is going to drop it back to the base factory build so you'll lose anything you've installed etc.

How do I hard reset 8125, with buttons only (key / button combination) OS does not boot or visible.

press the "connetions" button (on the left hand side of the unit next to volume up/down) with the "voice" button (right hand side of the unit opposite the connections button) and then use the stylus to do the normal soft reset and it should hard reset back to factory settings - it's described in the manual

Tried hard reset several times, no luck.
All I did was installed registry wizard from here
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
and now I can't get it to do anything, anymore suggestions ?, your help is really appriciated, I have only had the phone to 2 days and its dead already

try holding the same two buttons and then hitting the power button instead of the reset thingy... this method was easier for me... If this dosen't work you will have to enter bootloader mode and reflash the rom.
For the detailed reset procedures try here
By the way, did you use that program to change the default input method?? I use it all the time and the only time it gave me the whitescreen is when I tried to change the default input...Oops. I believe that you should be able to use that program safely, just leave the default input alone... Hope this helps.

Thanks for info, I did manage to reload the ROM. and Yes I did change the default input method, that might have done it. Thanks all, for your Help.

raheelb did you have the warning that the proggie cannot recognize the AKU version?
I had had such a warning, unfortunately bypassed it and had the same issue (white screen) - any one knows why the RegistryWizard cannot recognize AKU version? I have the original Qtek 2.17 ROM installed... :?

Wing Problem

Hello,
I just uninstalled the Arabic support package (Pocket Arabizer Suite v2). Afterwards, I am not able to use my wing to make calls. I even tried to search for network and couldn't find any. I was thinking if I reinstall the Arabic package might help. Unfortunately, ActiveSync is not working no more as well. Also, I tried hard reset (by holding the 2 soft keys along with soft rest) but it wont reset.
Anyone got a clue ?

When you hard reset did you keep holding down the softkeys after you pressed the soft rest button? When done correctly a prompt to soft reset should come up after about 5 seconds

yes, I did

no one got a clue?

Go into bootloader mode and run the TMO RUU.

I was tryin to avoid that. But, I just done it
Thanks

Dopod 818 Pro Problem

Hi guys, I just took over my dad's Dopod that was running under Windows Mobile 5 today.
During which, I installed:
PCCPIMBACKUP (and did a back up)
FIXUNREADCOUNT.exe and ran it.
After that, I resetted the device manually by holding down the power off switch and now my device won't start up again. IT keeps going to the "Dopod Screen" where is later restarts and attempts o switch on again.
IPL 1.00
SPL 1.00.00000
GSM 01.13.20
OS 1.0.13.21
I have not installed any other software except for these and I have attempted to hard reset twice with no avail.
Any help will be greatly appreciated.

are you sure u hard resetted the correct way?
put device on standby, press comm manager & camera button & poke your stylus in the reset hole.
should be hard reset...

wanwarlock said:
are you sure u hard resetted the correct way?
put device on standby, press comm manager & camera button & poke your stylus in the reset hole.
should be hard reset...
Click to expand...
Click to collapse
Yeap, did that. I hard reseted it a few times, tossed it about (literarily) and the just left it alone for the night. The next morning it switched on and hasn't been giving me much issues. Though I just found out the loudspeakers are busted. ):

Did you Check your baterry?

Hello pal...
Today i just hard reset my dopod 818 pro via setting and clear storage.. its done nicely.. until i install ezinput keyboard and after soft reset my device is unbootable...
i try to hard reset my device (press camera and comm manager and poke reset button) but just colurful screen appears (red,green, blue) according to tutorial, the send command will appear... please help me..

Hard reset dind't work

Hi everybody,
on my Trinity hard reset doesn't work anymore. After for example flashing with a new rom bootloader just blinking. OS is booting normally but hard buttons doesn't work only the "joypad" in the middle. For hardreset i have to press Send button to accept hard reset when i remeber well. But nothing happend when pressing the button. In fact that the device wants a hardreset, softreset is the same problem. I have to replace battery to access OS and boot device. Has anybody a solution? Or is there a progam for WM which can make a hardresend?
€dit:
Is it possible that something is wrong with the bootloader?
thanks and best
Robbat