Database Users

VERY URGENT HELP - on boot loader and no way to go out

A disaster!
My very good friend (Qtek S100 Italian) have a big trouble!!!!
Now it's on boot loader and no way to go out :shock:
I think that the rom was f**ked, I try with a SD with the rom(I used Multi-port/USB TTY Ver1.11a to do it with another Qtek) but the PDA don't show the download menu
I tried with the original ROM from Dangard but the program say that the rom was not for my device
I used the MaUpgradeUt_noID, but it's not working
the pda screen is always on boot loader, changing only from serial to USB (when I Connect)
I don't know if I can use Multi-port/USB TTY to solve my situation, I tried to use the lnb command but the answer was that I have not the permission
By the way, I disconnect the battery and wait, but when I give power I have always the boot loader
Any way to help me? tnx
Stefano

need to make my brick back to a fone plz help

cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help

If it is realy a brick without any chance of life I need a part of it: the keypad.

Thats really rude.

not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen

All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.

Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.

You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.

Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.

Kjam is not booting.

Hi There.
I really need your guys help!!!
a few weeks ago, i lost my battery and i recharged it using USB cable and battery.
It was boot up and i was testing it and keep reboot up. It was work!!
But after a hour left, can not boot up again.
I recharged my battery using USB cable ( cut it off and using red and black wire)
I did hard reset. ( Still not work)
try to flash rom, but can not do it. I was in Bootloder and when i attached USB cable to my kjam, it show off that USB on the screen with 3 colors.
I tried all the way, but still can not boot up.
My PDA show blue screen with I-Mate and
IPL 2.16.0001
SPL 2.16.0001
GSM 02.20.11
OS 2.16.9.1
Please guys help me to boot up my Kjam.
Please.
[email protected]

I tried restore ROM, but still can not boot up.
Please guys help me. T.T

please help me my magaican wont work

hello
I bought 2 magicans but one works fine the other wont torn on. But wen I conectet it on a charger it has started to boot, but for a few seconds then shotdown. I tryed hard reset and everything I could imagenen. When is conected to pc whit a usb cabel it dosent turn on.
ps:
I am sorry for my english.
thank you all

hello
I bought 2 magicans but one works fine the other wont torn on. But wen I conectet it on a charger it has started to boot, but for a few seconds then shotdown. I tryed hard reset and everything I could imagenen. When is conected to pc whit a usb cabel it dosent turn on.
ps:
I am sorry for my english.
thank you all

Problem in Rom
Hi
According to my understanding, your rom is not working properly. Please download the fresh copy of WE_2.03 Rom and 1.3 Radio. Than attach your cell with your pc. Press soft reste button+camra button+long press reset button. This will tour your cell to usb mod (total black) than install 1.3 radio and after that, install 2.03 rom. In this way you can replace your old rom with brand new one. There is a lot of information on the bellow link how to replace your Rom
http://forum.xda-developers.com/showthread.php?t=322110
Ali

thanke you ali
Thank you ali but the problem is that I can not enter the boot mode (usb mode). The problem is theat only on chrger the phone starts to boot. It wont boot when plugd in pc wia usb or on on batt power.
thanks

boot problems NEED HELP

Hi everybody,i'm using cingular 8125 and i have a problem.I installed new windows and the phone discharged.I charged it directly with oder charger because with normal charger or true pc it's not charging.Now when i turn on the phone i see htc logo and nothing else.I even don't see the ipl/spl/gsm/os info.Just htc logo and nothing more.
I tried to enter bootloader mode,but it don't connect to pc.
Please help if you can

can somebody help me?

Hi someoneee,
Please, let's clear your problem.
The phone discharged while flashing the new ROM, or after, while normally using?
What other charger you've used? Was it compatible?
Which ROM have you flashed?
Cheers

The phone discharged while normally using,after flashing.
I flashed CR96 Touch HD™ v6.5.0.3.3 RC5 rom.
I charged battery directly with wires from other battery.
I can turn on the phone,but he won't boot.It's just that htc logo from CR96 rom.
I used CR96 rom's for long time,but this is first time when i have this problem.

Man, I can't figure what went wrong with you...
Have you used SoftSPL or HardSPL? Don't worry, I'm just asking
And which system are you on? I've heard that Vista and 7 aren't that good for flashing...
If nothing helps you, search for topics about "Wizard Love ROM". Maybe that can help you.
Good luck man!

well i tried to hard reset my device when turning on,it's said that it completed,but it doesn't change anything.Well i use windows 7,but for flashing i use windows xp mode.
and yes i used softspl and hardspl

by the way,i can't flash anything,because when i turn on bootloader mode,it doesn't connect the device to the pc.I don't know what to do..