Related
Dear all 818pro(ENG OS)
The reason causing memory card disappear problem is dopod built-in software.(inside Extension Rom)
Only one method to solve, hard reset the PDA but without installed any built-in software as follow:
Right now I hard-reset the PDA, until the password setup, and then the PDA begin install build-in software...soft reset immediately.
If you used above hard-reset method which don't installed any built-in software. You only lost:
1. Smart Dailer
2. Built-in Voice Commander
3. Autoconfig
4. clearvue pdf
I used two days and everything work fine. You may ask why I so sure? Because I noticed the speed of reading memory card is different before which listed below:
1. Before using above mentioned method: When the PDA turn on (In sleeping mode and phone on mode), it need 1-3 seconds to read the memory card. If you installed Today Plug-in Software, you may found that it need 1-3 seconds to detect the memory card.
2. After using above mentioned method: When the PDA turn on, the PDA detect the memory card simultaneously.
As a result, I can assure this method can solved the memory card disappear problem.
Some experience would like to share with all user:
1. I installed all programs in the ROM. If someone installed programs in the memory card, please let me know the result.
2. I can installed back the smart dialer software. Please search this forum to download.
3. When you connected GPRS, a 'Disconnect' button (and Timer) to the Connection List for GPRS is disappeared. You can make registry hack to switch back.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
4. PDA can detect 'Phone Service Provider' automatically. However, when you need GPRS, you need manuel setup. I used 'PEOPLES' which is Hong Kong Service Provider and take as a Example setup:
Go to Setting > Connections > Tap Connections
1. Choose > My ISP - Add a new modem connection
2. You need to enter > a Name (Which name you like) and Select a modem [Cellular Line (GPRS)] > Next
3. Acess point name : Peoples.net > Next
4. Ignore the user name and password. > Finish
Thanks for the Reg Hack!!! Worked perfectly on the Dopod 818Pro!!!!
Thanks!!!
voyager
sas90850 said:
2. I can installed back the smart dialer software. Please search this forum to download.
Click to expand...
Click to collapse
Hi sas90850,
What a good job you've done! Excellent!
I'm wondering whether this topic is the instruction you said (WM5 smart dial)
or you could point out where I can download the smart dialer software and have an installation instruction, thanks.
I've 818Pro and would like to do the same "UPGRADE"... :wink:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
sas90850 said:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
Click to expand...
Click to collapse
Just to let everyone know that you already have this same file as well as the GPRS disconnect button CAB file in your own Dopod 818Pro's Extended_rom. You can browse and copy files in this hiden folder with GSfinder.
This worked for me also with the jamin. I soft reset after hard resetting and it gave me back rom and fixed the sd issue. Thanks
Edit: After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
Hi, this method seems to have solved most of my Jamin troubles too! Thanks!
I need just some help to get the GPRS timer: I don't find the registry. Is it in the HKEY_CURRENT USER OR THE HKEY_LOCAL_MACHINE? I found the Control Panel\Phone, but not the "Flags 2" registry that needs changing as described.
Many thanks!
Dear Fidipaldi
You need to add a new registry. Make sure you use DWORD Value. The location is shown below.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
1. To add a Disconnect button only:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 8
2. To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 16
3. To disable both the Disconnect button and the timer:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 0
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Dear SAS,
Many thanks for your help!!
It works great! I also managed to get the smart dialer back. The only application that is missing is Clearview.
So far my Jamin does not seem to crash on a regular basis as it did before. It must be the add on software that made the device crash.
Finally I can enjoy the device. Thanks again!
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
sas90850 said:
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Click to expand...
Click to collapse
Here's what I usually do on a new device or after a hard reset. I have about 10 progs on my sd card (total commander, tweaks2k2, etc...) and I have created shortcuts to them and placed them in a folder on my sd card. I then copy those and paste them in the /windows/start menu/programs folder and everything works well. I've noticed this quirky behavior on the jamin so far?
I did what you recommended by not installing the ext rom. I'm happy with a quicker device and more rom; however, I'm still having this little issue with the icons not appearing correctly in the start menu? Kind of strange. The white and blue default box is what's showing up (as if there is no shortcut icon) but the progs open just fine? :shock:
which program should we install
After Hard Reset and Review the extended rom,
There are serveral progarms avaliable for install
I just wonder what program from Extended Rom should we normally install in order to make phone become functional as the standard automatic install of extended rom?
Secondly, what each one of them is for? does anybody has information?
Thank you very much
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Khuanchai said:
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Click to expand...
Click to collapse
After 6 days used, I don't have any soft reset problem at all no matter in standby mode, sleeping mode and/or battery charging either the PDA is turn on/off......any condition.:roll:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
mtarro said:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
Click to expand...
Click to collapse
Thanks Yes it worked temporarily and then after a soft reset...same. I've narrowed it down a bit. The progs show fine in the bottom of the start menu (recently run progs) but if I add them to the top part of the start menu, they show fine until a soft reset....then they don't again. What I also noticed is if I copy the .exe and paste it in the start menu it shows fine....the only problem was when I copied the .exe and pasted a shortcut to the .exe. Anyway, I've settled on a fix. A few of the progs that didn't display correctly, I've just added to ilauncher.
Don't spend any more brain power on it for now....it must be something specific to me as others aren't posting problems like this. Thanks again
@mikewchandler
First of all it's nice to see you again on this forum!
To fix your problem try installing Signed_IconsDll.sa.cab from the extended rom. This should fix your problem!
@ALL
Regarding the SD card issue, the problem seems to be originating from the file Signed_SD_Driver.sa.cab. Not installing just this cab will also solve the problem.
I would suggest installing the following cabs as well as these improve system stability or add functionality:
CAB-ConnectionSpeedMax.sa
CAB-Shortcut-MMS1-JAVA5XX-CV-Dopod........
CAB-WapPushSMS
Signed_Disable_ErrorReport.sa
Signed_DisconnectButton_3s.sa
Signed_IconsDLL.sa
Signed_PIE_View_Default.sa
Signed_Prophet_DopodAsia_UA.sa
Signed_Version.sa
SmartDialing_enable_0915_signed
Thanks kta....it's great being here but I'm going to miss the eten community. :?
Thanks for the tips. Yeah, I didn't install the ext rom at all....I should have mentioned that (if I didn't?). Thanks again.
Edit: Where's the best place to get the files off the ext rom? I don't guess I know how to extract the ext rom to copy before hard resetting, soft resetting to keep it from installing. Hope that runon sentence makes sense.? :roll:
Well i tried to install WM6 and a screen with 4 BIG bold lines (from top to bottom Blue Green Red and this () yellow/tan color) and on the bottom line it has
No GSM
D 5.60.00 WWE
How do i fix this/whats wrong/WTF/ help please =/
EDIT: now i was messing around with the buttons and up came this,
(all options are selected no)
Boot Options:
Enable KITL__________NO
Clean Registry Hive ___NO
Format storage_______NO
Do i enable one of these or something? please help me...
Enable the last two and press the "envelop" button.
That should fix your problem
Extra question: are you sure your device is BlueAngel?
@up no im not, I didnt even know my phone had a name, Mine is a Audiovox PPC6600 but its the same pic as the blue angel, So i assumed it was.
Okay, I did what he said, and then my screen went white, after a few of waiting it was still white so i did a soft reset, and now its at the same spot.
xXBuddahXx said:
Mine is a Audiovox PPC6600
Click to expand...
Click to collapse
Big problem right there! I think you just bricked your phone
The ROMs you find here are for GSM phones and yours is CDMA. Currently there are no wm6 ROMs or wm5 ROMs available for CDMA phones, some people were working on a wm5 but I don't know if they released it.
To fix your phone you may try to put it in bootloader again and try to flash it with an original ROM.
Good luck!
This "No GSM" made me think. So we have another gotcha and Harrier (this is your device, xXBuddahXx) probably saved
Ok what now? did i really BIRCK my phone? Im confused Jakubd is there a way to fix it? i hope so or that smiley face is really mean. Im a huge noob to this crap (im only 16 and this is my first pda/phone thing) So again please have patience with me, Bootloader mode is the record/cam/power/reset thing right? What do i do after that? Can any of you give me some links or a step by step tut? I dont want to screw it up any more than it is if i can fix it...
Boot Loader Mode
You can enter or exit bootloader mode by pressing the camera button, power button and then the reset button and hold for a few seconds.
If the above won't work, this worked for me (thanks to all the gurus in the forum): press and hold power+record+camera the same time and then reset
Click to expand...
Click to collapse
Here you can find the correct ROM for it: http://forum.xda-developers.com/showthread.php?p=764778#105710
If you can get into bootloader mode you're fine, you didn't brick it.
Thank u thank u thank u Hey quick question, When i install this do i have to put it in bootloader mode first? and When i install this will it return it to factory settings? Because i flashed it from VZW to Cricket
You'll have to put your phone in bootloader mode before you install the update.
After the installation is done, you will need to hardreset it.
When the upgrade is completed, you must perform a Hard Reset
1.
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
*
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
*
If you have a PH20B1 device such as SX66:
o Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
o OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
2.
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
* If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
* Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
3. Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
4. When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly
Click to expand...
Click to collapse
If you still that ROM (that you flashed from VZW to Cricket) then use it.
Well, it didnt take a rom to flash it i just uploaded a prl and Changed my Min and NID/SID numbers... is it still okay to use the one that was listed, or do i have to download a special one for VZW?
And thank you so much man, you really saved me! I would rep ya if i could!
Also is there a website That is for CDMA phones like this one, and does mine have a cool name like blue angel or somthing (it sucks when i tell my friends that i have a Audiovox PPC6600 Gee Wiz!)
Your phone is a blueangel, it just have a different hardware for the phone part (PH20A3) and because of that your phone "cool" name is Harrier.
You'll probably have to stick with wm2003 as I don't believe that they have a wm5 or wm6 for your hardware. Here is a link with more information and people trying to make wm5 for the cdma: http://forum.xda-developers.com/showthread.php?t=244441
For the update, download it from verizon: http://support.vzw.com/how_to_use/bba_device_update.html
There are 2 versions, one for a phone with camera and for phones without camera.
Error 120 country ID error 56-56-8-8-8
Im guessing i download say the eruopian version or somthing? where would i find this on the USA site or something?
I found this on the verizon website here in the USA.
1. Download update to desktop
2. Unrar or unzip all files in exe or rar into a new folder
3. Open the folder with the extracted files
4. Download this file: MaUpgradeUt_noID.ZIP
5. Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
6. Run this new exe file instead of BaUpgradeUt.exe to update your rom
7. If you get an error the first time, run MaUpgradeUt_noID.exe again without touching your device (don't take it out from the cradle, don't reset it, don't touch it at all!)
8. If you get the same error kill from Task Manager these two process: wcescomm.exe and rapimgr.exe and then retry running MaUpgradeUt_noID.exe
9. If the seems to hang forever the "Getting the information...", put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button. and run the MaUpgradeUt_noID.exe again
Click to expand...
Click to collapse
This application has failed to start because RUU.dll was not found. Re Installing the application may fix this problem. I didnt even install it, its just an exe =/ soooo close!
You're not reading the instructions dude.
First you donwload the update from the verizon website
Then you use winrar or winzip to extract all the files from the archive to a folder
Now copy the MaUpgradeUt_noID.exe (wich you extracted from the zip file) to the same folder
Run the MaUpgradeUt_noID.exe and you should be fine
Sorry man, i know i must be getting annoying =/. But i cant find the update to download from the website :S
Ok... after 1/2 hour uploading I got two files for you:
If your phone have a camera:
HA_VZW_207_117_01167_A12.rar (37.98 MB)
http://www.megaupload.com/?d=W2M60157
If your phone don't have a camera:
HA_VZW_207_118_01167_A12.rar (37.67 MB)
http://www.megaupload.com/?d=033DU3IA
Just download the correct file, extract it using winrar, put your phone in bootloader mode and run MaUpgradeUt_noID.exe
Good luck!
THANK YOU OH SO MUCH!!!! Man, is there ANYTHING i can do for you??
Help others.
my qtek 9000 is stuck at bootloader
i read all the forums and didnt find the answer i look..
so please help
i did nothing wrong with the phone... i put it to charge and now its stuck at the bootloader (i think), the screen where it shows the radio version etc...
how can i start it again, or how can i "reinstall" windows
thx alot and pls help
i looked here:
http://forum.xda-developers.com/showpost.php?p=1164331
but the: Use the RECORD and CAMERA buttons (are not working for me)to navigate between the options, and switch the YES/NO values. Set the following:
how to navigate
avatar_ro said:
my qtek 9000 is stuck at bootloader
i read all the forums and didnt find the answer i look..
so please help
i did nothing wrong with the phone... i put it to charge and now its stuck at the bootloader (i think), the screen where it shows the radio version etc...
how can i start it again, or how can i "reinstall" windows
thx alot and pls help
i looked here:
http://forum.xda-developers.com/showpost.php?p=1164331
but the: Use the RECORD and CAMERA buttons (are not working for me)to navigate between the options, and switch the YES/NO values. Set the following:
how to navigate
Click to expand...
Click to collapse
Have you READ the Wiki?
Good luck
(
i dont know whats happening !!!!!!!!!!!!
but i tried EVERYTHING and still stucks at bootloader screen!!!
the thing is ... that this method does not work "1) Use two fingers to simultaneously press the RECORD and CAMERA buttons of the phone (on the phone's left side). Whilst these two buttons are depressed, use the stylus to click the soft-reset button underneath the phone - keep the two buttons depressed until the boot loader screen appears.
2) This should enable three options on the boot screen. These options allows a YES/NO response. Use the RECORD and CAMERA buttons to navigate between the options, and switch the YES/NO values. Set the following:
1] Enable KITL: NO (this is a debug tracing option which isn't required, except possibly for developers)
2] Format Registry Hive: YES (clears the registry)
3] Format Storage: YES (formats the internal memory: "\" directory, and under "\RamDisk\". Items under any storage card "\Storage Card\" are not formatted).
i can make a YES or NO at KTL but i cant scroll down with those keys to enable option 2 and 3
any ideas?
3) Once these options are set, press the MAIL button (in between today and the Pocket IE button) to confirm these options, and continue with the Registry and Storage format.
4) The device performs the reset, and the Windows CE setup screens (ie. screen alignment etc.) appear. Continue as per a new install.
"
problem initially -
volume keys active all the time, even when keypad locked.#
Action taken -
For just the volume buttons (keeping all standard icons at the top)
1) Copy sdkcert.cab to your phone or storage card and run it installing to the device when it asks if you want to install to Device or Storage Card.
2) Then using either Total Commander or Resco Explorer (there's a trial version available) copy the HTCVolumeControl.dll file that's in HTCVolumeControl.zip to the Windows directory of the phone itself replacing the one that's already there.
3) Reboot.
4) Lock keys and test volume buttons.
Result -
Volume keys inactive whilst locked keypad
However -
Since doing this, my bluetooth device will not pair up, or become visible on device, it has some fuctionality, but minimal, whereas before the above was done, was working 100%
Tried to replace the revised HTCvolumecontrol.dll, with an original, this had no result....
Any ideas please????
solution - achieved...
re installed stock rom, device back to normal.
Beware of using the disable volume button fix.
hi any ideas on this sorry im a little simple on this
You can't delete it off the ROM so if you did a hard reset it will be back on the device and then you can re-enter your S/N...OR, if you've just deleted the shortcut off the Start menu you can make a new one using ActiveSync/WMDC
ok mate thanks how do i do that then? lol sorry told u i was pathetic at this
Hard reset:
Turn off the device, hold Vol Up and Vol Down and tap the power button - keep the Vol Up/Down held and you should get a screen asking you to press Vol Up to delete all personal info (make sure you back up contacts, etc. first!!!). I usually do this with both SIM and SD card removed from phone to be on the safe side!!
Make a short cut:
Connect phone to PC and it should give you an icon in My Computer (assuming you have it connected via activesync on the phone). You can then browse to the CoPilot folder and make a new shortcut and paste it in the Start menu.
If you've only just started using the phone and haven't set much up a hard reset is prob the easiest thing to do
ive still got the co pilot splash screen icon but ive just deleted all the files ive had the phone a while so the activ sync option is the best bet i think?
If you deleted them from within the program files on the phone then you'll need to do a hard reset unless you can find a CAB for the program.
What ROM are you using?