Dear all 818pro(ENG OS)
The reason causing memory card disappear problem is dopod built-in software.(inside Extension Rom)
Only one method to solve, hard reset the PDA but without installed any built-in software as follow:
Right now I hard-reset the PDA, until the password setup, and then the PDA begin install build-in software...soft reset immediately.
If you used above hard-reset method which don't installed any built-in software. You only lost:
1. Smart Dailer
2. Built-in Voice Commander
3. Autoconfig
4. clearvue pdf
I used two days and everything work fine. You may ask why I so sure? Because I noticed the speed of reading memory card is different before which listed below:
1. Before using above mentioned method: When the PDA turn on (In sleeping mode and phone on mode), it need 1-3 seconds to read the memory card. If you installed Today Plug-in Software, you may found that it need 1-3 seconds to detect the memory card.
2. After using above mentioned method: When the PDA turn on, the PDA detect the memory card simultaneously.
As a result, I can assure this method can solved the memory card disappear problem.
Some experience would like to share with all user:
1. I installed all programs in the ROM. If someone installed programs in the memory card, please let me know the result.
2. I can installed back the smart dialer software. Please search this forum to download.
3. When you connected GPRS, a 'Disconnect' button (and Timer) to the Connection List for GPRS is disappeared. You can make registry hack to switch back.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
4. PDA can detect 'Phone Service Provider' automatically. However, when you need GPRS, you need manuel setup. I used 'PEOPLES' which is Hong Kong Service Provider and take as a Example setup:
Go to Setting > Connections > Tap Connections
1. Choose > My ISP - Add a new modem connection
2. You need to enter > a Name (Which name you like) and Select a modem [Cellular Line (GPRS)] > Next
3. Acess point name : Peoples.net > Next
4. Ignore the user name and password. > Finish
Thanks for the Reg Hack!!! Worked perfectly on the Dopod 818Pro!!!!
Thanks!!!
voyager
sas90850 said:
2. I can installed back the smart dialer software. Please search this forum to download.
Click to expand...
Click to collapse
Hi sas90850,
What a good job you've done! Excellent!
I'm wondering whether this topic is the instruction you said (WM5 smart dial)
or you could point out where I can download the smart dialer software and have an installation instruction, thanks.
I've 818Pro and would like to do the same "UPGRADE"... :wink:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
sas90850 said:
Dear all user
you can download the built-in smart dialer software as following link. Make sure you download the "SmartDialing_enable_0915_signed.CAB" only.
http://forum.xda-developers.com/viewtopic.php?t=32458&highlight=smart+dialer
Copy the .cab file to PDA and install. Must soft reset. :wink:
If anyone installed software in the memory card, please post here whether the disappear problem is solved. :?:
Click to expand...
Click to collapse
Just to let everyone know that you already have this same file as well as the GPRS disconnect button CAB file in your own Dopod 818Pro's Extended_rom. You can browse and copy files in this hiden folder with GSfinder.
This worked for me also with the jamin. I soft reset after hard resetting and it gave me back rom and fixed the sd issue. Thanks
Edit: After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
Hi, this method seems to have solved most of my Jamin troubles too! Thanks!
I need just some help to get the GPRS timer: I don't find the registry. Is it in the HKEY_CURRENT USER OR THE HKEY_LOCAL_MACHINE? I found the Control Panel\Phone, but not the "Flags 2" registry that needs changing as described.
Many thanks!
Dear Fidipaldi
You need to add a new registry. Make sure you use DWORD Value. The location is shown below.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
1. To add a Disconnect button only:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 8
2. To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 16
3. To disable both the Disconnect button and the timer:
Go to HKLM\ControlPanel\Phone
Add Name = 'Flags2' :arrow: DWORD Data = 0
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Dear SAS,
Many thanks for your help!!
It works great! I also managed to get the smart dialer back. The only application that is missing is Clearview.
So far my Jamin does not seem to crash on a regular basis as it did before. It must be the add on software that made the device crash.
Finally I can enjoy the device. Thanks again!
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
sas90850 said:
Dear mikewchandler
Question :After soft resetting my device, the start menu once again doesn't show the correct icons for programs loaded on the sd card?? The programs will open and work but the icons are displayed?
1. Copy the program *.exe file which installed in the SD Card.
2. Use File Explorer:
Go to Windows\Start Menu\Programs :arrow: Paste Shortcut
You will get the programs icon.
Click to expand...
Click to collapse
Here's what I usually do on a new device or after a hard reset. I have about 10 progs on my sd card (total commander, tweaks2k2, etc...) and I have created shortcuts to them and placed them in a folder on my sd card. I then copy those and paste them in the /windows/start menu/programs folder and everything works well. I've noticed this quirky behavior on the jamin so far?
I did what you recommended by not installing the ext rom. I'm happy with a quicker device and more rom; however, I'm still having this little issue with the icons not appearing correctly in the start menu? Kind of strange. The white and blue default box is what's showing up (as if there is no shortcut icon) but the progs open just fine? :shock:
which program should we install
After Hard Reset and Review the extended rom,
There are serveral progarms avaliable for install
I just wonder what program from Extended Rom should we normally install in order to make phone become functional as the standard automatic install of extended rom?
Secondly, what each one of them is for? does anybody has information?
Thank you very much
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Khuanchai said:
sas90850 said:
After 5 days. :lol:
Right now I installed a lot programs both in the ROM and SD Card and didn't find any disappear problem. :lol:
One more thing, I also found that the auto soft-reset seems gone too.
I will keep posting here and let you know the result. :wink:
Click to expand...
Click to collapse
The SD card problem seems disappear but it still soft resets itself after standby and battery charging for a while.
Click to expand...
Click to collapse
After 6 days used, I don't have any soft reset problem at all no matter in standby mode, sleeping mode and/or battery charging either the PDA is turn on/off......any condition.:roll:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
mtarro said:
re: Mike Chandler
Try this....
goto settings, menu and unclick just one of the programs in question. select ok and then checkout the start menu. Should be well again. Then go back and reselect your menu button you unclicked earlier. All is well. I'm not sure if this is a permanent solution or not but it does work.
Mike
Click to expand...
Click to collapse
Thanks Yes it worked temporarily and then after a soft reset...same. I've narrowed it down a bit. The progs show fine in the bottom of the start menu (recently run progs) but if I add them to the top part of the start menu, they show fine until a soft reset....then they don't again. What I also noticed is if I copy the .exe and paste it in the start menu it shows fine....the only problem was when I copied the .exe and pasted a shortcut to the .exe. Anyway, I've settled on a fix. A few of the progs that didn't display correctly, I've just added to ilauncher.
Don't spend any more brain power on it for now....it must be something specific to me as others aren't posting problems like this. Thanks again
@mikewchandler
First of all it's nice to see you again on this forum!
To fix your problem try installing Signed_IconsDll.sa.cab from the extended rom. This should fix your problem!
@ALL
Regarding the SD card issue, the problem seems to be originating from the file Signed_SD_Driver.sa.cab. Not installing just this cab will also solve the problem.
I would suggest installing the following cabs as well as these improve system stability or add functionality:
CAB-ConnectionSpeedMax.sa
CAB-Shortcut-MMS1-JAVA5XX-CV-Dopod........
CAB-WapPushSMS
Signed_Disable_ErrorReport.sa
Signed_DisconnectButton_3s.sa
Signed_IconsDLL.sa
Signed_PIE_View_Default.sa
Signed_Prophet_DopodAsia_UA.sa
Signed_Version.sa
SmartDialing_enable_0915_signed
Thanks kta....it's great being here but I'm going to miss the eten community. :?
Thanks for the tips. Yeah, I didn't install the ext rom at all....I should have mentioned that (if I didn't?). Thanks again.
Edit: Where's the best place to get the files off the ext rom? I don't guess I know how to extract the ext rom to copy before hard resetting, soft resetting to keep it from installing. Hope that runon sentence makes sense.? :roll:
Related
Hi, i'm from Spain (I don't speak english very well) and i've got a problem with my Imate Jam. After a Hard Reset, Smart dialing and other aplications didnt install. Then i tried to install Smart Dialing with a .cab file but i get the following error: The file \windows\iacontacts.dll are used or in ROM.
I tried to install it at the begining, but i get the same error.
can anybody help me please?
Thank you
nobody? I need to do a hard reset?
thanks
Hi, the messega that "\windows\iacontacts.dll is in use" indicates that the program is already installed and running. If not you can try the following:
- download memmaid (http://www.pocketgear.com/software_detail.asp?id=14279)
- install it, it offers control of autostart programs and services
- find and disable the entry that corresponds too iacontacts.dll
- soft reset and install
Or you can do (prolly easier):
- use a file manager to go into the windows dir and find that iacontacts.dll (prolly hidden so use something like Resco Explorer to see hidden files)
- you wont be able to delete it and you should not do it anyway
- but you can rename it to something like iacontactsold.dll
- softreset and install the cab file, it will not bother you now because the dll has not been loaded because it has not been found (you renamed it)
- you can then go into the win dir and should find your renamed dll as well as a new iacontacts.dll, delete your renamed one now
By the way: May I ask what Smart Dialling does anyway? I've not figured that out yet. Its installed on my S110 and I have options for that in the phone tool but no idea what it actually does or how it behaves when it is not installed.
Thank u very much! I followed the second way and i get it
With Smart Dialing for example: To call "Churri" (my girlfriend) you can write 248774 instead of 222-44-88-777-777-444. To find a number for example 99565856, you write 995 and Smart dialing find it automatically.
Thank you very much
Ah ok so you can use fragments of numbers until the right ones are picked out. Pretty neat. I'm happy it worked for you.
Hi All,
I have an I-mate jasjar, This is the first time i tried installing applications to Storage Card (1GB), when ever i tried to install using Activesync 4.0, It doesnt ask me which folder to install i.e Like Default or Storage Card. And also If i click Add/Remove Programs in Activesync 4.0, I find that the checkbox "install program into the default installation folder" is checked and disabled. Hence I am unable to change it. Find the below image for the same.
Please can some one help me on this, on how to resolve the same.
Regards,
Francis.
Hi Francis,
1. Try inserting a bit smaller memory card (may be 512).
2. check if the momory card is not locked physically.
3. At the lowest, try to hard reset, but keep the memory card inside the i-mate while it install the windows. IMP: dont forget to backup important files before rebooting.
GoodLuck
Sidd
[email protected]
First of all get Active Sync 4.1 from here...
http://www.microsoft.com/windowsmobile/downloads/activesync41.mspx
On WM5 devices like Universal and Wizard I think you choose the location on the device, so you just install to 'default folder' from activesync and when it gets to the phone instead of then going ahead and installing it gives you the choice, phone or storage card.
On 2003SE Windows Mobile, you did have to choose the location on your pc in active sync and when it went to your device it went where you sent it.
Hi,
Mine is a MMC Card, so i dont think it can be locked Physically, also i dont have a smaller card to check whether it works. May be i can try your last option, but i have lot of sms, which will be lost.
Regards,
Francis.
Thanks a lot
As mentioned, whenever I tried to install the application in the PPC it ask me where to install. Thanks a lot !!!
Regards,
Francis.
Did you find out how to load a program to an SD card in the Universal? I want to know too, please.
Whenever I install an application I see a message saying: "This is from a unknown developer, do you still want to install? Press YES or NO." This is the only message I see, no option to install it to the SD card.
Any suggestions please?
Can anyone confirm if cabinstl does anything on WM5?
Its dialog pops up, but then I get the normal WM5 dialog then asking for a destination a second time.
I think I may have confused cabinstl by adding the following registry keys:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Apps\Microsoft Application Installer]
"fAskOptions"=dword:00000001
"fAskDest"=dword:00000001
which will force the Wm5 installer to ask for a destination. This may be useful to those who aren't getting this dialog by default.
However, I want my MTV. And cabinstl. Working. Properly.
V
i've do the reg hack, softreset but nothing succeded! any idea?
any 1?
I have programs like: Email Setup, O2active...
1) how do i remove them so that after a HR they will return ??
2) i managed to find Email setup - but after deleting the files - i still have blanc shortcut in Start>Programs saying email-setup (with empty icon).
why?
can i remove only shortcuts but keep the program?
These things you wanna remove are installed everythime you hard reset. THey are programs in the extended ROM. These are customizations to WM5 that the retailer (imate, o2,qtek, t-mobile) put on the device.
If you don't want to install any of these do the following:
1. Hard Reset Device.
2. you'll go thru a series of screens:
2.1 Welcome Message
2.2 Align Screen
2.3 Tap and Hold tutorial
2.4 Password Configuration
2.5 Ending Screen that asks you to press screen to continue.
3. RIGHT AFTER step 2.5 (after you tap the screen) press the RESET hole.
This will bypass installing all the files in extended ROM which normally shown by a progress bar at the bottom everytime you do a normal hard reset.
4. Now you can Install the stuff in the extended ROM one at a time. Only the ones you need to install. To access the ExtendedROM (it is hidden) download Total Commander (search thru google) and type \EXTENDED_ROM in the navigation window and it will display the contents of the extended ROM.
I don't have O2 so i cannot explain to you what each individual .CAB file does. Just use a little guess work. THe O2Active, i believe is easily spotted. It's the biggest CAB file. Don't click on it so it won't install.
Tell me if this helped you out or if you need more clarifications.
Hola Jorge
First of all - Thanks for the great explanation !!
Although I do want most of the stuff, i already tried corporate mode (clean install) but I missed a lot of things.
therefor I installed Basic mode. (which hasnt got ALL the features)
But - some of the features i DO want to take away.
(NOT FROM EXT ROM)
only for now... programs in the Start>Program>
Lets say I wanna take the games away...
where are all the programs installed TO ??
I found some of them. but when I deleted the email setup for instance -
I still have an empty Email Icon in START>PROGRAMS>
(again i remind U - I wanna leave the ext rom as it is)
10x again !!
Some features in the ExtROM are installed in Corporate mode too, the sure way to customize is to bypass ExtROM, then install one-by-one the .CAB files you want.
Anyway regarding the Games, etc. they are part of the OS so cannot be uninstalled unless they came with the extended ROM like Backgammon that came with the JASJAR ExtROM.
To delete the ICON that is blank but still has text, go to \WINDOWS\START MENU\PROGRAMS\GAMES
You'll find the shortcut there. Or just to \WINDOWS\START MENU to see all the oter shortcuts in case you wanna remove other stuff.
The games are installed in WINDOWS and a shortcut is created to the Star Menu Directory. Just delete the shortcut.
What does "10x again !!" mean?
This problem has happened to me a few times with different ROMs but I haven't be able to find the pattern nor the solution!
Basically everything starts very well, when I install a new program it appears in "Add/Remove Programs" in Settings. Then at some point strange thing happens, when I install a new program (any program, not specific) it no longer appears on the list! However, I can see it as installed and it actually appears on the "Add/Remove Programs" of ActiveSync(v4.2)! I can remove it by using ActiveSync but not on the device because I can't select it!
And the other strange thing is, I can see the program's folder under "\Windows\AppMgr\" (every program installed manually should has its folder in here as I understand). And I can also see it under the registry "\HKLM\Security\AppInstall\". It just DOES NOT appear on the device "Add/Remove Programs" list! This happens to all programs after the problem starts but those installed before that point are still displayed!
I am wondering if anyone knows the reason why this happens and if there is any solution like registry hack anything like? Although this is not the end of the day as I can still remove them via ActiveSync, it does annoys me because of the fact that I can't remove it directly from the device.
Thanks in advance!!
Try sk tools software , it has a detailed info for add or remove prog.
Hi,
I have the same problem, not certain what caused it, but you can get items back in the list by following the steps below:
Get programs back into uninstall list:
1) go to..
HKEY_LOCAL_MACHINE\Security\AppInstall\
2) Select the application directory that is not showing up in the list
3) Change the DWORD Role data from 40 to 24
4) Now the application will show up in the list.
Cheers
Rowan
Excellent!!
Thanks a lot for the advices guys!!
I will try Rowan's suggest first because it is easier and sounds good to me! Only thing is I have flashed my Universal so currently the problem is gone. I will try it if it happens again or I may try it on my Windows Mobile Device Emulator later on.
Well, I am back and I am glad to have some time to support the community again, updated the first post and i will flash the rom today and will be able to support this thread as well.
Windows Mobile 6.5.3 Beta English Rom 28008
V1.0
Download via Rapidshare.com
IMPORTANT! If a program can not be closed with the X, please use the OK hard key!
Included Programs:
- HTC USB to PC
- HTC Comm Manager (Replaced with an older Version)
- Device Information
- Microphon AGC
- Button lock Setting
- New Keyboard Layout
- X-Button (Programs close by clicking X, for minimizing tap and hold X, tap and hold the Start key for Taskmgr)
- Reconizer integrated!
- HTC Power
- HTC Advanced Netzwerk (For GPRS Settings)
- WMP replaced (By a better player! Plays everything!!)
- xdaShutdown (Down in the Taskbar!) IMPORTANT!!! Shutdown function has a Problem with the Touchscreen!! does not work for landscape mode
- FlightMode
- .NetCFcfg
- Keyboardbacklight
- WLAN Settings
- New Bluetooth Settings!
- New Telefon Settings!
- 16MB RamDisk
- WM Widgets compatibility (IE8 must be installed!)
FIX:
- SMS Alarm
- changed Start Menu
- XIP improved
- Alarm Sounds
- CHome changed
- Input Options
- GPS Option FIX New
- Provider FIX New
- Lan Option FIX New
Misc:
- Made with a new Kitchen (much better)
- SQM Dummy (not important)
- FWUPDATE Dummy (sends data to MS)
- I deleted some files for more space
- System Tweaks New
The ExtROM can be used for the new version!
Extrom 23081:
Download via Rapidshare.com
- Office (UPX)
- Pocket IE8 (UPX,FIX Zoom)
- MyPhone
- WM MarketPlace
- NetCF 3.5
More Windows Mobile Apps by request.
The Extrom is installed by putting the folder to the sd card. The installation starts automatically after a soft- or hard reset. The cfg.txt can be editted to personal use.
In correspondance with cosmicgate, i decided to post our guide on how to upgrade here, to avoid question further questions about that:
THESE INSTRUCTIONS ARE SUITABLE FOR WINDOWS XP COMPUTERS ONLY!!!
For people running WM5/6x but with 43MB of storage:
You have to downgrade to WM2003 and here's how to do that:
1. Download this Windows Mobile 2003 SE rom:
Download from Rapidshare
Download from Uploaded.to
and extract it to a folder of your choice.
2. Remove both the the SIM card and the sd card
3. Put the device into Bootloader Mode, pressing power+record and reset
4. your device display shows Serial v2.0x
5. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
6. Now let's start the actual Upgrade:
7. Navigate to the Upgrade folder
8. Start Maupgradeut_noid
9. If in the 2nd window the rom version is not shown, something went wrong, start over!
10. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
11. After it finishes perform a "WM2003 hard reset" by pressing power and reset
12. wait for the extrom to finish
13. now you can re-insert your sim and sd card (if you are planning to go on from here, you can also leave them out).
14. proceed with "For devices running wm2003"
For devices running wm2003:
1. Copy repart_doc.exe and the unlocker cab to the device and install the unlocker. In the start menu you will find a folder named "Extrom Tool".
2. Click "unhide" (if you are getting an error message, proceed with 2.a, else with 3.)
2.a the unlocker installs into the standard folder for program files, which depends on the rom language can be "\programme" or "\programmes" etc.
2.b the link in the start menu always points to "\program files"
2.c the easiest way, to solve that, is to rename your program files folder to "\program files"
2.d that destroys parts of the system, but doesn't matter because it is just needed for unlocking
2.e since now the link location should be correct, proceed with step 3.
3. Click "unlock", maybe a soft reset is needed.
4. Start repart_doc.exe
5. Set the future size, if not pre-entered, to 128kb (smallest possible partition size on this file system)
6. Click "Format now!"
7. Soft reset
8. Go back to the Extrom Tools
9. "Lock"
10. "Hide"
11. Now proceed with "Upgrading a WM5/6 device"
Upgrading a WM5/6 device
1. Remove both the the SIM card and the sd card
2. Put the device into Bootloader Mode, pressing power+record and reset
3. your device display shows Serial v2.0x
4. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
5. Now let's start the actual Upgrade:
5.a copy the downloaded nk.nbf to any given folder, let's call it Upgrade 28008
5.b copy the contents of this package to the same folder: MAupgradeUt_noID
5.c Start MAupgradeut_noID
6. If in the 2nd window the rom version is not shown, something went wrong, start over!
7. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
8. After finishing, take the device out of the cradle take out the battery and insert the SIM card
9. copy the EXTROM folder to the sd card and insert the sd card
10. Hard reset the device, pressing reset+power and record+camera and in the menu, that appears set:
Enable_Kitl: NO
Clean Registry Hive: YES
Format Storage: YES
using the camera and record buttons.
11. press the mail button to confirm your selection.
12. your device starts for the first time, you align the screen and let the extrom install, it soft resets and your device is ready to use
Special thanx to d tow and chef tony
I will try it.
Synchronization does not work Microsoft ActiveSync Thank you Chef_Tony
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Chef_Tony said:
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Click to expand...
Click to collapse
Je bent echt geweldig werken nu
You are really great now working
Bedankt
Thank you Chef_Tony
I'm am also DLing now and will certainly give it a try. Great work and thank you both, D-two and Chef Tony.
Good work ;
It seems beautiful Rom
Many Thnx , Maybe I'll try it later
Best Regards.
great work..
how about input settings?
yes, i know that they are missing, i wrote d-two about that, i am missing them too.
hi good work
but there is missing in the contrast setting too.
hi d-two! i can't open wmp and set sounds & notification? why?
hi d-two! missing backlight slider
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Chef_Tony said:
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Click to expand...
Click to collapse
ok Chef_ ,i waiting for final version
what about microphone icon in the system settings is it there
how to turn on backlight?
====
edit:
problem solved
aaraj said:
what about microphone icon in the system settings is it there
Click to expand...
Click to collapse
No, there is no Microphone AGC in the settings.
changed 1st post
when using Lanscape mode, and at the restart, the screen will return to Potrait with a touch screen that does not irregular like the R71's Xplode. but it was not my experience on the d-two ROM version 1 (WM6.5.1 build 23052). try to use the method Lanscape then restart, then you will experience it.
one again
about gprs icon
gotz said:
great work..
how about input settings?
Click to expand...
Click to collapse
This solved the input settings problem:
Remove the "Redirect" value under the following keys:
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
Until now, it seems to be a very fast and stable ROM!! My congratulations on this D-two!! and my thanks to Chef_Tony.