my qtek 9000 is stuck at bootloader - JASJAR, XDA Exec, MDA Pro General

my qtek 9000 is stuck at bootloader
i read all the forums and didnt find the answer i look..
so please help
i did nothing wrong with the phone... i put it to charge and now its stuck at the bootloader (i think), the screen where it shows the radio version etc...
how can i start it again, or how can i "reinstall" windows
thx alot and pls help
i looked here:
http://forum.xda-developers.com/showpost.php?p=1164331
but the: Use the RECORD and CAMERA buttons (are not working for me)to navigate between the options, and switch the YES/NO values. Set the following:
how to navigate

avatar_ro said:
my qtek 9000 is stuck at bootloader
i read all the forums and didnt find the answer i look..
so please help
i did nothing wrong with the phone... i put it to charge and now its stuck at the bootloader (i think), the screen where it shows the radio version etc...
how can i start it again, or how can i "reinstall" windows
thx alot and pls help
i looked here:
http://forum.xda-developers.com/showpost.php?p=1164331
but the: Use the RECORD and CAMERA buttons (are not working for me)to navigate between the options, and switch the YES/NO values. Set the following:
how to navigate
Click to expand...
Click to collapse
Have you READ the Wiki?
Good luck

(
i dont know whats happening !!!!!!!!!!!!
but i tried EVERYTHING and still stucks at bootloader screen!!!
the thing is ... that this method does not work "1) Use two fingers to simultaneously press the RECORD and CAMERA buttons of the phone (on the phone's left side). Whilst these two buttons are depressed, use the stylus to click the soft-reset button underneath the phone - keep the two buttons depressed until the boot loader screen appears.
2) This should enable three options on the boot screen. These options allows a YES/NO response. Use the RECORD and CAMERA buttons to navigate between the options, and switch the YES/NO values. Set the following:
1] Enable KITL: NO (this is a debug tracing option which isn't required, except possibly for developers)
2] Format Registry Hive: YES (clears the registry)
3] Format Storage: YES (formats the internal memory: "\" directory, and under "\RamDisk\". Items under any storage card "\Storage Card\" are not formatted).
i can make a YES or NO at KTL but i cant scroll down with those keys to enable option 2 and 3
any ideas?
3) Once these options are set, press the MAIL button (in between today and the Pocket IE button) to confirm these options, and continue with the Registry and Storage format.
4) The device performs the reset, and the Windows CE setup screens (ie. screen alignment etc.) appear. Continue as per a new install.
"

Related

PLEASE HELP

HELP
I installed WM2K5 V1.60, happy as a baby.
But by installing the first ppc-program the mda2 won’t reset
I try anything also put the battery out and in it stays at the same screen, see attachment...PLEASE HELP
Do you mean it wont go back to WM2003 ?
If so then , thats because you have installed a new ROM ont your phone ... it will never be able to return to the old WM2003 you used to see when doing a hard reset because that software has been overwrote by the new WM2005 ROM.
There most likely will be a way to downgrade to WM2003 though.
If thats not what u ment then im sorry for talkin crap
You are saying it is sticking on the boot screen, but it was ok until you installed a program? Which program did you install?
try to format storage
you better go tho the wiki page and find how to hard-reset
then go to the boot menu and format the storage i beleave that will solve it
The program that I installed was the [email protected]#$% “MobiMate WorldMate 2005 Professional V3.0.20”
I let the battery out for the night and I tried this morning,
I know I was desperate so you try anything
I try also to overwrite the WM2k5, no contact with the mda2.
If the picture (see attachment) is showing the “hard reset” then I don it, without result...it sty at the start screen (see above)
If hard-reset is other combination, then please show me
Guys please help
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
pschoch said:
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Click to expand...
Click to collapse
Oh man, you are an angel
Respect, for the master, who bring my mda2 back to life
Giga thanks mate

No GSM, D 5.60.00 WWE? Whats that mean?

Well i tried to install WM6 and a screen with 4 BIG bold lines (from top to bottom Blue Green Red and this () yellow/tan color) and on the bottom line it has
No GSM
D 5.60.00 WWE
How do i fix this/whats wrong/WTF/ help please =/
EDIT: now i was messing around with the buttons and up came this,
(all options are selected no)
Boot Options:
Enable KITL__________NO
Clean Registry Hive ___NO
Format storage_______NO
Do i enable one of these or something? please help me...
Enable the last two and press the "envelop" button.
That should fix your problem
Extra question: are you sure your device is BlueAngel?
@up no im not, I didnt even know my phone had a name, Mine is a Audiovox PPC6600 but its the same pic as the blue angel, So i assumed it was.
Okay, I did what he said, and then my screen went white, after a few of waiting it was still white so i did a soft reset, and now its at the same spot.
xXBuddahXx said:
Mine is a Audiovox PPC6600
Click to expand...
Click to collapse
Big problem right there! I think you just bricked your phone
The ROMs you find here are for GSM phones and yours is CDMA. Currently there are no wm6 ROMs or wm5 ROMs available for CDMA phones, some people were working on a wm5 but I don't know if they released it.
To fix your phone you may try to put it in bootloader again and try to flash it with an original ROM.
Good luck!
This "No GSM" made me think. So we have another gotcha and Harrier (this is your device, xXBuddahXx) probably saved
Ok what now? did i really BIRCK my phone? Im confused Jakubd is there a way to fix it? i hope so or that smiley face is really mean. Im a huge noob to this crap (im only 16 and this is my first pda/phone thing) So again please have patience with me, Bootloader mode is the record/cam/power/reset thing right? What do i do after that? Can any of you give me some links or a step by step tut? I dont want to screw it up any more than it is if i can fix it...
Boot Loader Mode
You can enter or exit bootloader mode by pressing the camera button, power button and then the reset button and hold for a few seconds.
If the above won't work, this worked for me (thanks to all the gurus in the forum): press and hold power+record+camera the same time and then reset
Click to expand...
Click to collapse
Here you can find the correct ROM for it: http://forum.xda-developers.com/showthread.php?p=764778#105710
If you can get into bootloader mode you're fine, you didn't brick it.
Thank u thank u thank u Hey quick question, When i install this do i have to put it in bootloader mode first? and When i install this will it return it to factory settings? Because i flashed it from VZW to Cricket
You'll have to put your phone in bootloader mode before you install the update.
After the installation is done, you will need to hardreset it.
When the upgrade is completed, you must perform a Hard Reset
1.
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
*
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
*
If you have a PH20B1 device such as SX66:
o Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
o OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
2.
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
* If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
* Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
3. Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
4. When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly
Click to expand...
Click to collapse
If you still that ROM (that you flashed from VZW to Cricket) then use it.
Well, it didnt take a rom to flash it i just uploaded a prl and Changed my Min and NID/SID numbers... is it still okay to use the one that was listed, or do i have to download a special one for VZW?
And thank you so much man, you really saved me! I would rep ya if i could!
Also is there a website That is for CDMA phones like this one, and does mine have a cool name like blue angel or somthing (it sucks when i tell my friends that i have a Audiovox PPC6600 Gee Wiz!)
Your phone is a blueangel, it just have a different hardware for the phone part (PH20A3) and because of that your phone "cool" name is Harrier.
You'll probably have to stick with wm2003 as I don't believe that they have a wm5 or wm6 for your hardware. Here is a link with more information and people trying to make wm5 for the cdma: http://forum.xda-developers.com/showthread.php?t=244441
For the update, download it from verizon: http://support.vzw.com/how_to_use/bba_device_update.html
There are 2 versions, one for a phone with camera and for phones without camera.
Error 120 country ID error 56-56-8-8-8
Im guessing i download say the eruopian version or somthing? where would i find this on the USA site or something?
I found this on the verizon website here in the USA.
1. Download update to desktop
2. Unrar or unzip all files in exe or rar into a new folder
3. Open the folder with the extracted files
4. Download this file: MaUpgradeUt_noID.ZIP
5. Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
6. Run this new exe file instead of BaUpgradeUt.exe to update your rom
7. If you get an error the first time, run MaUpgradeUt_noID.exe again without touching your device (don't take it out from the cradle, don't reset it, don't touch it at all!)
8. If you get the same error kill from Task Manager these two process: wcescomm.exe and rapimgr.exe and then retry running MaUpgradeUt_noID.exe
9. If the seems to hang forever the "Getting the information...", put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button. and run the MaUpgradeUt_noID.exe again
Click to expand...
Click to collapse
This application has failed to start because RUU.dll was not found. Re Installing the application may fix this problem. I didnt even install it, its just an exe =/ soooo close!
You're not reading the instructions dude.
First you donwload the update from the verizon website
Then you use winrar or winzip to extract all the files from the archive to a folder
Now copy the MaUpgradeUt_noID.exe (wich you extracted from the zip file) to the same folder
Run the MaUpgradeUt_noID.exe and you should be fine
Sorry man, i know i must be getting annoying =/. But i cant find the update to download from the website :S
Ok... after 1/2 hour uploading I got two files for you:
If your phone have a camera:
HA_VZW_207_117_01167_A12.rar (37.98 MB)
http://www.megaupload.com/?d=W2M60157
If your phone don't have a camera:
HA_VZW_207_118_01167_A12.rar (37.67 MB)
http://www.megaupload.com/?d=033DU3IA
Just download the correct file, extract it using winrar, put your phone in bootloader mode and run MaUpgradeUt_noID.exe
Good luck!
THANK YOU OH SO MUCH!!!! Man, is there ANYTHING i can do for you??
Help others.

help needed...

problem initially -
volume keys active all the time, even when keypad locked.#
Action taken -
For just the volume buttons (keeping all standard icons at the top)
1) Copy sdkcert.cab to your phone or storage card and run it installing to the device when it asks if you want to install to Device or Storage Card.
2) Then using either Total Commander or Resco Explorer (there's a trial version available) copy the HTCVolumeControl.dll file that's in HTCVolumeControl.zip to the Windows directory of the phone itself replacing the one that's already there.
3) Reboot.
4) Lock keys and test volume buttons.
Result -
Volume keys inactive whilst locked keypad
However -
Since doing this, my bluetooth device will not pair up, or become visible on device, it has some fuctionality, but minimal, whereas before the above was done, was working 100%
Tried to replace the revised HTCvolumecontrol.dll, with an original, this had no result....
Any ideas please????
solution - achieved...
re installed stock rom, device back to normal.
Beware of using the disable volume button fix.

ELF0100 / HTC P3450i New Model?

Hi, im new to scene and already have a Imate jasjam (the TYTN) and have flashed it already to a new rom and works great.
However the HTC TouchFlo that I have seems to modified in some way as to not allow the old style Hard Reset / Soft reset, and has way diff specs for ram etc. It only has an inbuilt menu item to Master Clear the phone, but not rebuild menus etc.
Also the Elf / Elfin utility (dsixda's) to read the pda version etc will not work, and the utility to download the current spl (Dump SPL) fails as well.
and system/ >> Device Information/Hardware menu is missing on my phone
Is this common knowledge? As ive browsed here for a few days looking for the answer. All i can assume is they have implemented some lock to stop reverse engineering.
have i missed a step somewhere?
Here is a Gallery of images, to view.
http://img195.imageshack.us/gal.php?g=image011is.jpg
To add i copied dim application from my other phone (HTC TYTN), and most of the fields are empty. still says rom ver / date blank, radio and protocol blank
hardware. cpu blank, speed blank, ram size 6881394MB flash 7602288 MB, storage 72.78 MB , model and imie blank.
It doesnt matter too much with whats going on, its seems to have been manufactured less that 2 months ago and i have no problems with it.
Would have been good to slightly customise it, but nevermind.
Yup, most of the stuff have been changed.
TYTN is slightly older and therefore has more hardware buttons.
If you wish to hard reset, here you go:
http://www.flickr.com/photos/ryjones/2193904710/
Just to let you know that doesnt work either.
Found out how to hard reset.
Press Power, Camera, Call (green) and Disconnect (Red) , and reset with stylus.
hold buttons for 5 seconds, screen will go BLUE.
Release, all 4 buttons and when loaded system is default again.
excuse me, I have the same HTC, from China. Now it has only English. Could you help me, haw I can make it Russian?
Thanks
Help me how to change from france to english
Help me how to change from france to english ,
please can someone try to show me the way how to change language or install a new software,i have a france windows
Start -> Settings -> System -> Regional Settings.

[Release] WM6.5.3 Build 28008 English by d-two

Well, I am back and I am glad to have some time to support the community again, updated the first post and i will flash the rom today and will be able to support this thread as well.
Windows Mobile 6.5.3 Beta English Rom 28008
V1.0
Download via Rapidshare.com
IMPORTANT! If a program can not be closed with the X, please use the OK hard key!
Included Programs:
- HTC USB to PC
- HTC Comm Manager (Replaced with an older Version)
- Device Information
- Microphon AGC
- Button lock Setting
- New Keyboard Layout
- X-Button (Programs close by clicking X, for minimizing tap and hold X, tap and hold the Start key for Taskmgr)
- Reconizer integrated!
- HTC Power
- HTC Advanced Netzwerk (For GPRS Settings)
- WMP replaced (By a better player! Plays everything!!)
- xdaShutdown (Down in the Taskbar!) IMPORTANT!!! Shutdown function has a Problem with the Touchscreen!! does not work for landscape mode
- FlightMode
- .NetCFcfg
- Keyboardbacklight
- WLAN Settings
- New Bluetooth Settings!
- New Telefon Settings!
- 16MB RamDisk
- WM Widgets compatibility (IE8 must be installed!)
FIX:
- SMS Alarm
- changed Start Menu
- XIP improved
- Alarm Sounds
- CHome changed
- Input Options
- GPS Option FIX New
- Provider FIX New
- Lan Option FIX New
Misc:
- Made with a new Kitchen (much better)
- SQM Dummy (not important)
- FWUPDATE Dummy (sends data to MS)
- I deleted some files for more space
- System Tweaks New
The ExtROM can be used for the new version!
Extrom 23081:
Download via Rapidshare.com
- Office (UPX)
- Pocket IE8 (UPX,FIX Zoom)
- MyPhone
- WM MarketPlace
- NetCF 3.5
More Windows Mobile Apps by request.
The Extrom is installed by putting the folder to the sd card. The installation starts automatically after a soft- or hard reset. The cfg.txt can be editted to personal use.
In correspondance with cosmicgate, i decided to post our guide on how to upgrade here, to avoid question further questions about that:
THESE INSTRUCTIONS ARE SUITABLE FOR WINDOWS XP COMPUTERS ONLY!!!
For people running WM5/6x but with 43MB of storage:
You have to downgrade to WM2003 and here's how to do that:
1. Download this Windows Mobile 2003 SE rom:
Download from Rapidshare
Download from Uploaded.to
and extract it to a folder of your choice.
2. Remove both the the SIM card and the sd card
3. Put the device into Bootloader Mode, pressing power+record and reset
4. your device display shows Serial v2.0x
5. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
6. Now let's start the actual Upgrade:
7. Navigate to the Upgrade folder
8. Start Maupgradeut_noid
9. If in the 2nd window the rom version is not shown, something went wrong, start over!
10. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
11. After it finishes perform a "WM2003 hard reset" by pressing power and reset
12. wait for the extrom to finish
13. now you can re-insert your sim and sd card (if you are planning to go on from here, you can also leave them out).
14. proceed with "For devices running wm2003"
For devices running wm2003:
1. Copy repart_doc.exe and the unlocker cab to the device and install the unlocker. In the start menu you will find a folder named "Extrom Tool".
2. Click "unhide" (if you are getting an error message, proceed with 2.a, else with 3.)
2.a the unlocker installs into the standard folder for program files, which depends on the rom language can be "\programme" or "\programmes" etc.
2.b the link in the start menu always points to "\program files"
2.c the easiest way, to solve that, is to rename your program files folder to "\program files"
2.d that destroys parts of the system, but doesn't matter because it is just needed for unlocking
2.e since now the link location should be correct, proceed with step 3.
3. Click "unlock", maybe a soft reset is needed.
4. Start repart_doc.exe
5. Set the future size, if not pre-entered, to 128kb (smallest possible partition size on this file system)
6. Click "Format now!"
7. Soft reset
8. Go back to the Extrom Tools
9. "Lock"
10. "Hide"
11. Now proceed with "Upgrading a WM5/6 device"
Upgrading a WM5/6 device
1. Remove both the the SIM card and the sd card
2. Put the device into Bootloader Mode, pressing power+record and reset
3. your device display shows Serial v2.0x
4. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
5. Now let's start the actual Upgrade:
5.a copy the downloaded nk.nbf to any given folder, let's call it Upgrade 28008
5.b copy the contents of this package to the same folder: MAupgradeUt_noID
5.c Start MAupgradeut_noID
6. If in the 2nd window the rom version is not shown, something went wrong, start over!
7. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
8. After finishing, take the device out of the cradle take out the battery and insert the SIM card
9. copy the EXTROM folder to the sd card and insert the sd card
10. Hard reset the device, pressing reset+power and record+camera and in the menu, that appears set:
Enable_Kitl: NO
Clean Registry Hive: YES
Format Storage: YES
using the camera and record buttons.
11. press the mail button to confirm your selection.
12. your device starts for the first time, you align the screen and let the extrom install, it soft resets and your device is ready to use
Special thanx to d tow and chef tony
I will try it.
Synchronization does not work Microsoft ActiveSync Thank you Chef_Tony
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Chef_Tony said:
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Click to expand...
Click to collapse
Je bent echt geweldig werken nu
You are really great now working
Bedankt
Thank you Chef_Tony
I'm am also DLing now and will certainly give it a try. Great work and thank you both, D-two and Chef Tony.
Good work ;
It seems beautiful Rom
Many Thnx , Maybe I'll try it later
Best Regards.
great work..
how about input settings?
yes, i know that they are missing, i wrote d-two about that, i am missing them too.
hi good work
but there is missing in the contrast setting too.
hi d-two! i can't open wmp and set sounds & notification? why?
hi d-two! missing backlight slider
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Chef_Tony said:
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Click to expand...
Click to collapse
ok Chef_ ,i waiting for final version
what about microphone icon in the system settings is it there
how to turn on backlight?
====
edit:
problem solved
aaraj said:
what about microphone icon in the system settings is it there
Click to expand...
Click to collapse
No, there is no Microphone AGC in the settings.
changed 1st post
when using Lanscape mode, and at the restart, the screen will return to Potrait with a touch screen that does not irregular like the R71's Xplode. but it was not my experience on the d-two ROM version 1 (WM6.5.1 build 23052). try to use the method Lanscape then restart, then you will experience it.
one again
about gprs icon
gotz said:
great work..
how about input settings?
Click to expand...
Click to collapse
This solved the input settings problem:
Remove the "Redirect" value under the following keys:
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
Until now, it seems to be a very fast and stable ROM!! My congratulations on this D-two!! and my thanks to Chef_Tony.

Categories

Resources