I have installed the IIWPO (theft protection) program manually (not in ROM) for testing purposes. After uninstall an error message appeared periodicaly. The error txt is "Cannot execute \windows\IIWPO_main.exe". Also I can not find any reference to this file in the registry (maybe faulty registry editor, PHM ?) or in the startup folder. Also tried searching in the file contents on entire device. No success. Please, help, this error message is pissing me off
Hey guys.......thanks ahead of time.....
I tried uninstalling IIWPO(theft protection).........and now I'm getting this error periodically(almost randomly...but very often)...
"Cannot execute \windows\IIWPO_main.exe"
I tried removing everything I knew of.........but I obviously didn't succeed.......any help?
It's hidden as an event.
Use this to remove the hidden entry for IIWPO_main.
In you un-install IIWPO you will definitely miss out one thing: The event that makes it run after turning your device on.
There are 2 ways to remove the event:
- Use the Scarybear software
- Hard-reset
Note that after using the scarybears software, you have to do a soft reset, but NOT by pushing the reset button with the stylus. Instead, hold down the power button, say yes at the dialog box. After it's off, bring it back up by holding down the power button again.
my qtek 9000 is stuck at bootloader
i read all the forums and didnt find the answer i look..
so please help
i did nothing wrong with the phone... i put it to charge and now its stuck at the bootloader (i think), the screen where it shows the radio version etc...
how can i start it again, or how can i "reinstall" windows
thx alot and pls help
i looked here:
http://forum.xda-developers.com/showpost.php?p=1164331
but the: Use the RECORD and CAMERA buttons (are not working for me)to navigate between the options, and switch the YES/NO values. Set the following:
how to navigate
avatar_ro said:
my qtek 9000 is stuck at bootloader
i read all the forums and didnt find the answer i look..
so please help
i did nothing wrong with the phone... i put it to charge and now its stuck at the bootloader (i think), the screen where it shows the radio version etc...
how can i start it again, or how can i "reinstall" windows
thx alot and pls help
i looked here:
http://forum.xda-developers.com/showpost.php?p=1164331
but the: Use the RECORD and CAMERA buttons (are not working for me)to navigate between the options, and switch the YES/NO values. Set the following:
how to navigate
Click to expand...
Click to collapse
Have you READ the Wiki?
Good luck
(
i dont know whats happening !!!!!!!!!!!!
but i tried EVERYTHING and still stucks at bootloader screen!!!
the thing is ... that this method does not work "1) Use two fingers to simultaneously press the RECORD and CAMERA buttons of the phone (on the phone's left side). Whilst these two buttons are depressed, use the stylus to click the soft-reset button underneath the phone - keep the two buttons depressed until the boot loader screen appears.
2) This should enable three options on the boot screen. These options allows a YES/NO response. Use the RECORD and CAMERA buttons to navigate between the options, and switch the YES/NO values. Set the following:
1] Enable KITL: NO (this is a debug tracing option which isn't required, except possibly for developers)
2] Format Registry Hive: YES (clears the registry)
3] Format Storage: YES (formats the internal memory: "\" directory, and under "\RamDisk\". Items under any storage card "\Storage Card\" are not formatted).
i can make a YES or NO at KTL but i cant scroll down with those keys to enable option 2 and 3
any ideas?
3) Once these options are set, press the MAIL button (in between today and the Pocket IE button) to confirm these options, and continue with the Registry and Storage format.
4) The device performs the reset, and the Windows CE setup screens (ie. screen alignment etc.) appear. Continue as per a new install.
"
Well, I am back and I am glad to have some time to support the community again, updated the first post and i will flash the rom today and will be able to support this thread as well.
Windows Mobile 6.5.3 Beta English Rom 28008
V1.0
Download via Rapidshare.com
IMPORTANT! If a program can not be closed with the X, please use the OK hard key!
Included Programs:
- HTC USB to PC
- HTC Comm Manager (Replaced with an older Version)
- Device Information
- Microphon AGC
- Button lock Setting
- New Keyboard Layout
- X-Button (Programs close by clicking X, for minimizing tap and hold X, tap and hold the Start key for Taskmgr)
- Reconizer integrated!
- HTC Power
- HTC Advanced Netzwerk (For GPRS Settings)
- WMP replaced (By a better player! Plays everything!!)
- xdaShutdown (Down in the Taskbar!) IMPORTANT!!! Shutdown function has a Problem with the Touchscreen!! does not work for landscape mode
- FlightMode
- .NetCFcfg
- Keyboardbacklight
- WLAN Settings
- New Bluetooth Settings!
- New Telefon Settings!
- 16MB RamDisk
- WM Widgets compatibility (IE8 must be installed!)
FIX:
- SMS Alarm
- changed Start Menu
- XIP improved
- Alarm Sounds
- CHome changed
- Input Options
- GPS Option FIX New
- Provider FIX New
- Lan Option FIX New
Misc:
- Made with a new Kitchen (much better)
- SQM Dummy (not important)
- FWUPDATE Dummy (sends data to MS)
- I deleted some files for more space
- System Tweaks New
The ExtROM can be used for the new version!
Extrom 23081:
Download via Rapidshare.com
- Office (UPX)
- Pocket IE8 (UPX,FIX Zoom)
- MyPhone
- WM MarketPlace
- NetCF 3.5
More Windows Mobile Apps by request.
The Extrom is installed by putting the folder to the sd card. The installation starts automatically after a soft- or hard reset. The cfg.txt can be editted to personal use.
In correspondance with cosmicgate, i decided to post our guide on how to upgrade here, to avoid question further questions about that:
THESE INSTRUCTIONS ARE SUITABLE FOR WINDOWS XP COMPUTERS ONLY!!!
For people running WM5/6x but with 43MB of storage:
You have to downgrade to WM2003 and here's how to do that:
1. Download this Windows Mobile 2003 SE rom:
Download from Rapidshare
Download from Uploaded.to
and extract it to a folder of your choice.
2. Remove both the the SIM card and the sd card
3. Put the device into Bootloader Mode, pressing power+record and reset
4. your device display shows Serial v2.0x
5. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
6. Now let's start the actual Upgrade:
7. Navigate to the Upgrade folder
8. Start Maupgradeut_noid
9. If in the 2nd window the rom version is not shown, something went wrong, start over!
10. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
11. After it finishes perform a "WM2003 hard reset" by pressing power and reset
12. wait for the extrom to finish
13. now you can re-insert your sim and sd card (if you are planning to go on from here, you can also leave them out).
14. proceed with "For devices running wm2003"
For devices running wm2003:
1. Copy repart_doc.exe and the unlocker cab to the device and install the unlocker. In the start menu you will find a folder named "Extrom Tool".
2. Click "unhide" (if you are getting an error message, proceed with 2.a, else with 3.)
2.a the unlocker installs into the standard folder for program files, which depends on the rom language can be "\programme" or "\programmes" etc.
2.b the link in the start menu always points to "\program files"
2.c the easiest way, to solve that, is to rename your program files folder to "\program files"
2.d that destroys parts of the system, but doesn't matter because it is just needed for unlocking
2.e since now the link location should be correct, proceed with step 3.
3. Click "unlock", maybe a soft reset is needed.
4. Start repart_doc.exe
5. Set the future size, if not pre-entered, to 128kb (smallest possible partition size on this file system)
6. Click "Format now!"
7. Soft reset
8. Go back to the Extrom Tools
9. "Lock"
10. "Hide"
11. Now proceed with "Upgrading a WM5/6 device"
Upgrading a WM5/6 device
1. Remove both the the SIM card and the sd card
2. Put the device into Bootloader Mode, pressing power+record and reset
3. your device display shows Serial v2.0x
4. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
5. Now let's start the actual Upgrade:
5.a copy the downloaded nk.nbf to any given folder, let's call it Upgrade 28008
5.b copy the contents of this package to the same folder: MAupgradeUt_noID
5.c Start MAupgradeut_noID
6. If in the 2nd window the rom version is not shown, something went wrong, start over!
7. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
8. After finishing, take the device out of the cradle take out the battery and insert the SIM card
9. copy the EXTROM folder to the sd card and insert the sd card
10. Hard reset the device, pressing reset+power and record+camera and in the menu, that appears set:
Enable_Kitl: NO
Clean Registry Hive: YES
Format Storage: YES
using the camera and record buttons.
11. press the mail button to confirm your selection.
12. your device starts for the first time, you align the screen and let the extrom install, it soft resets and your device is ready to use
Special thanx to d tow and chef tony
I will try it.
Synchronization does not work Microsoft ActiveSync Thank you Chef_Tony
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Chef_Tony said:
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Click to expand...
Click to collapse
Je bent echt geweldig werken nu
You are really great now working
Bedankt
Thank you Chef_Tony
I'm am also DLing now and will certainly give it a try. Great work and thank you both, D-two and Chef Tony.
Good work ;
It seems beautiful Rom
Many Thnx , Maybe I'll try it later
Best Regards.
great work..
how about input settings?
yes, i know that they are missing, i wrote d-two about that, i am missing them too.
hi good work
but there is missing in the contrast setting too.
hi d-two! i can't open wmp and set sounds & notification? why?
hi d-two! missing backlight slider
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Chef_Tony said:
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Click to expand...
Click to collapse
ok Chef_ ,i waiting for final version
what about microphone icon in the system settings is it there
how to turn on backlight?
====
edit:
problem solved
aaraj said:
what about microphone icon in the system settings is it there
Click to expand...
Click to collapse
No, there is no Microphone AGC in the settings.
changed 1st post
when using Lanscape mode, and at the restart, the screen will return to Potrait with a touch screen that does not irregular like the R71's Xplode. but it was not my experience on the d-two ROM version 1 (WM6.5.1 build 23052). try to use the method Lanscape then restart, then you will experience it.
one again
about gprs icon
gotz said:
great work..
how about input settings?
Click to expand...
Click to collapse
This solved the input settings problem:
Remove the "Redirect" value under the following keys:
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
Until now, it seems to be a very fast and stable ROM!! My congratulations on this D-two!! and my thanks to Chef_Tony.
i have camera problem in the 2 week that i have this mobile
camera not working .when i press photo icon nothing happend
is there any solution for this ? this mobile it's new with original rom
happy new year 2010!!!
palonisj said:
i have camera problem in the 2 week that i have this mobile
camera not working .when i press photo icon nothing happend
is there any solution for this ? this mobile it's new with original rom
happy new year 2010!!!
Click to expand...
Click to collapse
Hi palonisj,
You can try and perform a Hard Reset (wipes device back to factory settings) to see if it makes any difference. Please note: a hard reset will reset your phone back to factory settings, this excludes data stored on your MicroSD card.
If you need to backup any data (such as Contacts, Messages, etc) before you perform a hard reset, then you can use a backup program such as PIMBackup or Sprite Backup (you get 15-days full trial) to backup your entire phone to the storage card. In order to run this application, you first need to install the relevant cab file on your phone and then you access the backup program (PIMBackup or Sprite) via your phone to create a backup.
To perform a Hard Reset, please do the following:
1) With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2) Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3) Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
4) After the reset, don't install any software. Try the camera.
5) If you still have the same problem, you can also try going to the official HTC website, to the support section, and apply their Hotfix. Here is the link: http://www.htc.com/www/SupportDownload.aspx?p_id=179&cat=2&dl_id=533. Just follow the steps and you'll hopefully be fine. *** Make sure you have Microsoft .NET Framework 3.5 installed on your PC before you try this step ***.
If nothing from what I have suggested above works, then it is very likely to be a hardware issue in which case you should call up HTC to arrange repair - also explain to them that you've tried the Hotfix in the support section mentioned on their website.
Regards.
Well, hello there!
I.
Recently I wanted to move (or to copy) Task Manager (Task Manager.exe) in Windows/Start Menu/Programs and did not succeed.
I tried through (3) ways, via:
1. computer (phone connected via activesync)
2. phone's File Explorer
3. Resco File Explorer
None of them ways let me move or copy that file (windows protected?).
II.
On the other hand, is there a way to restart the phone without taking the battery cover and remove the battery or press the red button ( a combination of buttons, maybe)?
Thank you all!
Soft reset
Gid day.
I beleive that you can do a soft reset by pressing the End/Power button for about 3 seconds and you will be taken to a screen with a number of options. The top option is Power Off. Pessing that will power down the unit then all you have to do is power it back up again.
I know it is a long winded way of doing things but it's the only way I've come across so far.
Cheers - Kym
Sydney - AUSTRALIA
HTC HD2 (UK version)
16 GB Card
That file is on the ROM(read only memory), you can't move it. make a link to it instead.
There are several programs that let you put alink to shutdown/restart on your phone. I use xdashutdown, but there are others.