I have installed the IIWPO (theft protection) program manually (not in ROM) for testing purposes. After uninstall an error message appeared periodicaly. The error txt is "Cannot execute \windows\IIWPO_main.exe". Also I can not find any reference to this file in the registry (maybe faulty registry editor, PHM ?) or in the startup folder. Also tried searching in the file contents on entire device. No success. Please, help, this error message is pissing me off
Hey guys.......thanks ahead of time.....
I tried uninstalling IIWPO(theft protection).........and now I'm getting this error periodically(almost randomly...but very often)...
"Cannot execute \windows\IIWPO_main.exe"
I tried removing everything I knew of.........but I obviously didn't succeed.......any help?
It's hidden as an event.
Use this to remove the hidden entry for IIWPO_main.
In you un-install IIWPO you will definitely miss out one thing: The event that makes it run after turning your device on.
There are 2 ways to remove the event:
- Use the Scarybear software
- Hard-reset
Note that after using the scarybears software, you have to do a soft reset, but NOT by pushing the reset button with the stylus. Instead, hold down the power button, say yes at the dialog box. After it's off, bring it back up by holding down the power button again.
Related
I blame this stupid program called "iMusic" (nothing to do with Apple).
I installed it, assuming it is WM5 compatible, but it isn't (and that's another story), so I uninstalled it. But now every time I turn on the Universal a Notification Error pops up with the message "Cannot execute \Program Files\iMusic\iMusic.EXE"
It's still there after soft-resetting; and no, I'm not going to even consider doing a hard-reset for this! :wink:
I've already done a search for "iMusic" in PHM RegEdit but nothing was found; no iMusic related files in the Windows\StartUp folder.
Any solutions?
Download Memmaid or sktools and check your notification queue. There you will find an entry for the power on event (probably). Just delete it.
V
Never mind - I'm going to flash the Qtek AKU2 ROM anyway, but thanks Vijay.
On the Cingular 8125 I was trying to change the left soft key to open start menu. Found out it didn't work. Now I go back to the registry under 112 key and type the old default "\Windows\calendar.exe", wait a while, then soft reset.
Now I get an error message saying:
The file 'calendar' cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. You might need to reinstall or restore this fie.
Any ideas on what I screwed up? I can access the calendar from the programs page no problems.
I figured it out. I was told the string needed to be in "" but I tired it without and it's back to working fine again.
Need Help With This, Too!!
Exactly what is it you did to eliminate the problem. Everytime I press the left soft key, I also get that error message that HTCCalendar cannot start.
\Windows\calender.exe
That's what string I typed in
Hi,
I installed the program DciNobar to "play around" with tweaking my K-Jam. I wanted to bring them back so I tried to uninstall the program from Add/Remove programs and it gave an error and asked me if I wanted to remove it from the list which I selected yes to.
I have since installed SoftKeyAppletEX which has given me the option to reset everything to default or remap the keys manually which I have done yet they still do not show on my screen.
I'm thinking that the DciNobar is still starting up, but don't know where to find the key in the regsitry to remove it.
Does anyone have any suggestions?
Thanks
Ari
Not to worry found the solution. Removed dcinobar from the windows startup directory
i hard reseted my pocket pc once again.
The 1st message i receive after the hard reset is done and b4 displaying the today screen an eror is displayed where VoiceCmd.exe is the one diplaying that error.And 2 b more specific the message displayed is:" Cannot open"voiceCmd".A critical component is either missing or cannot start because program memory is unavailable.Tap start then .....
Once i get rid of this notification, a new 1 appears displaying Error OneNote.cab and then the same message is displayed.Then after removing this error the hard reset continues diplaying the message"Setting are being applied and windows will restart automatically.The windows restart then and as usual after the rebooting the same VoiceCmd.exe error is diplayed and cannot type on the screen cz it is not alligned.After the hard reset the op is not asking me to allign the screen anymore.So i have to go to settings and allign it manually.
Then after trying to install any.cab program will display this message:"Name of the program.cab".A critical component is either missing or cannot start because program memory is unavailable.
And of course when i plug the usb the lovely message flashes on my ppc screen displaying" Cannot execute repllog.exe"
Cannot run memmaid neither sktools.
Hellllllllppppppppppppp!!!
what rom are you using, and what extended rom?
Psi
N A J said:
i hard reseted my pocket pc once again.
The 1st message i receive after the hard reset is done and b4 displaying the today screen an eror is displayed where VoiceCmd.exe is the one diplaying that error.And 2 b more specific the message displayed is:" Cannot open"voiceCmd".A critical component is either missing or cannot start because program memory is unavailable.Tap start then .....
Once i get rid of this notification, a new 1 appears displaying Error OneNote.cab and then the same message is displayed.Then after removing this error the hard reset continues diplaying the message"Setting are being applied and windows will restart automatically.The windows restart then and as usual after the rebooting the same VoiceCmd.exe error is diplayed and cannot type on the screen cz it is not alligned.After the hard reset the op is not asking me to allign the screen anymore.So i have to go to settings and allign it manually.
Then after trying to install any.cab program will display this message:"Name of the program.cab".A critical component is either missing or cannot start because program memory is unavailable.
And of course when i plug the usb the lovely message flashes on my ppc screen displaying" Cannot execute repllog.exe"
Cannot run memmaid neither sktools.
Hellllllllppppppppppppp!!!
Click to expand...
Click to collapse
Hi Did you manage to fix this? I am getting this and cannot even switch off my handset
I'm having same problem, has anyone found a solution?
Hello my fellow Xperia lovers......and some haters! lol
Simple question....is there a way to remove a program upon a soft reset? I ask this because, i uninstalled the Inhand catolog thing, and when i do a soft reset, it comes up that the program InHandGo.exe could not be found and did not start up....which i don't really care, but i dont want to see that message every time i need to do a soft reset ><. So is there a way to either get rid of that message when soft reset is done, or just some how, fully and cleanly remove that program? I dont really see the point in having it....
andyboo said:
Hello my fellow Xperia lovers......and some haters! lol
Simple question....is there a way to remove a program upon a soft reset? I ask this because, i uninstalled the Inhand catolog thing, and when i do a soft reset, it comes up that the program InHandGo.exe could not be found and did not start up....which i don't really care, but i dont want to see that message every time i need to do a soft reset ><. So is there a way to either get rid of that message when soft reset is done, or just some how, fully and cleanly remove that program? I dont really see the point in having it....
Click to expand...
Click to collapse
The shortcut to InHandGo.exe remains in the startup folder after an uninstall. Just remove this shortcut and you won't get that error message again.
yup just remove that shortcut in \Windows\Startup and you are good to go!
That's also the program I have uninstalled first thing. Useless piece of crap!
How do i get into the \windows\ startup sorry? Im pretty much lost at this point...
EDIT:No wait....sorry....lol i figured it out...
Use the file explorer and go to \my device\windows\startup. It is just so simple!
Interestingly, I'm still experiencing the same behavior after I "uninstalled" that app and yet, when I went and check the Startup directory, there was no entry to In HandUpdater.
The error message I'm getting is "The file 'InHandUpdater' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
What am I doing wrong? Seeing the startup sequence halted because of this makes me want to go back and reinstall the darn thing - just so that I no longer see it.
Please advise. Thanks.
Have you tried installing the application again and then uninstalling. And then you have this program. Cleartemp is the name. It might help with cleaning all stuff left behind.
Same problem here :-(.
There is no shortcut for it in \windows\ startup and the message still comes up whenever I do restart the device!
How to re-install it?
OK, I reinstalled it and the message disappeared ;-)
To install go to "My Device/Program files/Handango Inhand/catalog" and run the file "inhand.cab"