can't install hardspl or do hard reset - Touch 3G General

hello
i have a jade100
i and tried it to install hardspl(automatic or manual) and i can't
gave me an connection error
i tried it to do a hard reset and neither
i try the tow ways to do a hard reset and nothing
please help
i want to change this ugly stock rom
thanks

first connect to your device with Windows Mobile Device Center then try Hardspl Auto
if you still get a problem, turn off fast usb (start > settings > connections > usb to pc > uncheck 'enable faster data synchronization')

Related

Activesync detects K-Jam but does not connect

When I connect the K-Jam to the PC, using a USB cable, ActiveSync 4.1 detects the device. It starts connecting but it doesn't get a real connection. After a few minutes, it stops connecting.
I tried several soft resets, but they didn't help. Sync did work on a previous installation of Windows XP (SP2) but on a freshly installed system, I can't get it to work.
When I connect the device I do get an error saying "a duplicate name exists on the network". But I have no idea on how to solve this.
There is no firewall or anti-virus software installed.
If read about MTU in other threads, but I can't find that entry in the registry.
Who can help me out?
(PS trying to sync via Bluetooth is also not working )
Try changing the PDA name.....
..... go to Start > Settings > System > About > Device ID.
change the device ID and see if it will connect.
I had a problem like this with an old Dell X50 that would not let me sync when I had done a restore. There are ways to resolve the issue but I can't remember them off the top of my head. See if the name change works first though.
Good luck
Re: Try changing the PDA name.....
bilbo_28 said:
..... go to Start > Settings > System > About > Device ID.
change the device ID and see if it will connect.
I had a problem like this with an old Dell X50 that would not let me sync when I had done a restore. There are ways to resolve the issue but I can't remember them off the top of my head. See if the name change works first though.
Good luck
Click to expand...
Click to collapse
Hi. I tried this, but it didn't work. So I did a hard reset and tried it again. And now, it's working fine again.

How hard reset

Hi,
after flashing with Helmi WM6 I had problem with active sync. If I leave the check box on PCto USB connection, Is impossible for me make a connection with PC.
For these reason I would like to make a hard reset but i I press power button and soft reset, dont work. So how can I reflash again the rom?
I would like to write also in italian If there is someone can help me.
tnks.
You should know how to HardReset your device (You MUST perform
hardreset during flashing ROM!)
Just to make it sure - you have UNcheck the USB check box in PC ActiveSync and are no longer able to sync via USB, right?
How to make "proper" flash:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
tanks you Kerio, I have read in the wiki more instruction about hard reset, now is more clear.
Yes If i UNcheck the USB check box in PC ActiveSync, I am no more able to sync via USB, why?
Lol - man
[ ]Allow USB connection -> You CANNOT sync via USB
[x]Allow USB connection -> You CAN sync via USB
--- Really funny Why do you want to uncheck this option? Just let it [x] and its ok...
kerio said:
Lol - man
[ ]Allow USB connection -> You CANNOT sync via USB
[x]Allow USB connection -> You CAN sync via USB
--- Really funny Why do you want to uncheck this option? Just let it [x] and its ok...
Click to expand...
Click to collapse
I,m sorry for my english, maybe I wrote wrong. The trouble is: On the BA, in the USB to PC program, If I Check Enable advance network functionality, I can sync but I can't navigate to internet.
If I UNcheck the check box of Enable advance network functionality, the BA don't sync anymore no more connection to PC.
This was discussed some times ago - use search button.
Shortly : Make your internet connection shared (ON PC) or add "those" registry entries.
*those* - use search button.
Kerio, great help. I found the post as you told me, the file is LSPvalue.reg . After done all work perfectly.
Thanks you so mutch.

Error[260]: Connection

Hello,
I have my shift installed with Windows 7 Professional and everything working great (including Shift control Center). I want to liberate my ROM, and I've decided to go by golum ROM. When I run the program under W7, after checking SnapVUE, software generate: Error [260]: CONNECTION. Please restart Windows and run the SnapVUE Software Update Utility again,
I've tried many tricks, nothing work. I mention that I don't have at this stage the 3G card inside the Shift.
Please advice,
I also get the following message when I login to Windows:
"data connection failed. Please check your APN settings."
Have you already liberated your Shift?
I don't think you can flash any custom ROM's before you have. If you have not, look at this thread
Error [260]: CONNECTION. Please restart Windows and run the SnapVUE Software Update U
Error [260]: CONNECTION. Please restart Windows and run the SnapVUE Software Update Utility again,
HI, HEPPENED THE SAME WITH ME. MY SHIFT IS LIBERATE AND DONT CHANGE ROM WITH WINDOWS 7. ITS SAY : Error [260]: CONNECTION. Please restart Windows and run the SnapVUE Software Update Utility again.
PLEASE!! HELP US !!!1
THANKS,
ERNANIBMNETO
I had this, to cure it, unlike in Vista, you have to have an active WMDC connection. On the WMside use the USB tool and connect it to 7, on the 7 side let the device be found and set up WMDC. Once this is done you should be able to flash once again.
I don't thinks so.
He's flashing a ROM.
@DeReSe : did you not only liberate, but also HSPL your device ?
DISABLE USB connections in Windows mobiile device center.
Then run USB tool on the SnapVue side, then start ROM update.
But, you need HSPL first
any solutions to this error?
Solved!!
Whoa!! long have i waited to solve this issue...finally did it!
here's what worked for me:
1) MOST IMPORTANT!!
In snapview side:
Start -> Settings -> Connections -> USB To PC -> UNTICK "allow advanced network connections" (or something like that...)
2) Download & Install WMDC 6.1 (you can google WMDC 6.1)
Now you can continue as usual:
3) Enable USB Tool on snapview side, and wait for WMDC to recognize the connection.
4) If you only want to flash a custom rom, you can just choose "connect with setting up my device (or something like that...).
5) That's It!! You can now continue to flash your favorite rom to your shift.
(so happy i got this solved !!! )
Hope this helps...Njoy (-!
Hi,
I tried updating i00 rom to light ROM using the method above but still gets the error :-(...I hope we can find another way...
Thanks
SOLVED!
Hi. I think I closed this case!
I got the same problem with my Shift. When I started to flash I got "error 260: connection".
HOWTO:
WinMo: USB tool -> attach
Win: Start flashing ROM
Win: ... -> ERROR 260
Win: Right click My Computer -> manage -> devices -> find your "Shift device" without driver -> right click -> update driver -> automatically -> wait until driver has been updated
Win: Start flashing again
Voilá

ROM upgrade

Hi fellow members,
Just upgraded htc 1.66 @ htc but device centre refuses to sync even.though I can connect. I used to sync just yesterday . What do.I do?
settings menu all settings connections usb to pc untick faster data
then reboot phone and pc, try again.

[Feb 12] [Q] Cannot connect with ActiveSync

Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
phlashlite said:
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
Click to expand...
Click to collapse
Have you tried to restart your PC and try different port?
Sometime this trick works
silverwind said:
Have you tried to restart your PC and try different port?
Sometime this trick works
Click to expand...
Click to collapse
Restarted the PC - worked like a charm. Thanks a million. I can breathe again.
...And I just made a modest donation. Thanks very much.
Troubleshooting Sync Connection with Your Computer
You can often solve any temporary sync connection problems by disconnecting your phone from the sync cable, waiting a few seconds, and then reconnecting it. However, sometimes you may experience persistent problems related to your network connection (for example, your Internet connection). You may be unable to sync your phone while there is an active network connection on your computer, or the network connection may be cut when you connect your phone to your computer. If this happens, you can try switching to a serial USB connection for your phone:
1. On the Home screen, slide to the Settings tab.
2. Tap Menu > All Settings > Connections > USB to PC.
3. Clear the Enable faster data synchronization check box.
4. Tap Done.

Categories

Resources