Database Users

i lose the connection via usb

dear all
i can not run activesincron in the pc with my xda2 true the usb cradel
but the bluetouth work fine also the cradel work
he charge the device
please have you any suggestion ???
the device is too slow the are any suggestion ???
i have qtek 2020 with
Rom 1.66.02 FR
Date of rom 02/23/04
radio ver 1.10.00
protocol 1337.18
ExtRom 1.66.211

make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed

Biso007 said:
make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed
Click to expand...
Click to collapse
hi biso007
thank's for your replay
yes i do it but noting
the strange that i can by connected true bluetooth
i dont like to make a hard reset .... :evil:

have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?

Rudegar said:
have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?
Click to expand...
Click to collapse
hi rudegar
thank's for your replay
yes
this config is standart and i dont change it
the device work before its only today i dont know whats hapend
also i remove all soft that i install today
checknotifications
clearnotify
phoneled_on-off
Pocket_Hack_Master
i remove all this and i make a soft reset many time
but nothing
also the are no conflict into the usb device and the cradel is know well by the pc
i suggest if there are no pin connection broken (but i see well no pin broken ) it's a software configuration
but how .....
sacaman

and activesync is set to use usb also ?

I had exactly the same problem about a month ago and after trying everything under the sun and nothing working i eventually ended up doing a hard reset,
It fixed it instantly so i restored all my data from a backup and it stopped working straight after the restore,
i hard reset once again and it synced ok, so i then had to reinstall all my programs individually rather than restoring the backup, it was very annoying but i dont think theres any other way around it

hi all
thank's for your response
it 's ok now but after making hard reset :evil:
i mst install software one by one to know who create this problem
and i keep you informed
by after all backup :evil: :evil:

USB unable to connect; but able to charge

All,
I am currently able to charge my TYTN, but unable to get a USB connection to activesync; any ideas?
I have tried switching off the usb advanced but i doesn't work...
When I soft reset while the USB cable is connected it starts up in bootloader but does not show it is connected via USB.....just nothing but the bootloader startup screen.....
IPL is 1.01 and SPL is 1.04.
My rom is the latest South African....
Ant help would be very nice,
Cheers,
HJ

sounds like a firewall problem. Try disconnection from the internet and disable your firewall. If it connects then, adjust the firewall settings before reconnection to the internet.
I had the same problem with EZ Firewall

Nope, it is not the firewall, it used to work perfectly and it suddenly doesn't...
2 different computers have the exact same problem..any ideas?

I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again

marisa4755 said:
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
Click to expand...
Click to collapse
Yeps, tried all of that.....even ahard reset....
But still no succes, now back to syncing via IR....

Just :
START > SETTINGS > CONNECTIONS > USB to PC (then untick this box)
Then try again, worked OK for me!!!

use USB switch program
try install this program in your PPC and after that change activesync via serial instead of RNDIS.
worked on my Unieversal but i do not know yours

i don't think you need this program as it is already available in control panel -> connections -> usb-pc

hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.

pole_vaulter12 said:
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
Click to expand...
Click to collapse
The weird thing is that I got it to work on my home WinXP pc with a different cable....
I need to do some more testing...
Cheers,
HJ

Unable to connect
Hi,
I have the same problem. Anyone solve this?

I have a cable that just wont sync, try a different cable maybe.

wpbear said:
I have a cable that just wont sync, try a different cable maybe.
Click to expand...
Click to collapse
I'll do and let you all know!

I tried another cable but that one also recognises my an unknow device.....is it somewhere in my USB drivers?
This pc is Win2k SP3, on my XP SP2 it was working....
Any ideas?

I had a defective cable. It did exactly what you are describing. All other cables worked fine.

Unable to Syn with PC after upgrade ausdim's Rom!

Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.

vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality

vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.

I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....

vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??

vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know

Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...

vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...

Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card

YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !

i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?

..........anyone?

your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .

htc usb to pc popup

the 3 options for usb to pc pops up when hd is connected to PC.
But if I want to reconnect to mode e.g: disk driver mode, how could I achieve
this without plugout&plugin the usb cable? Thank you.

you can softreset your phone after changing mode
otherwise you can't as far as I know

Yes you can!
Start -> Settings -> Connections tab -> USB to PC
Select what you need and the device will switch to that mode without any resets or replugging of the cable.

usb2pc doesn't include the internet shareing as usb2pcpopup.

There should be InternetSharing program in your start menu (I have Dutty's 3.3 ROM, I don't remember whether this program is stock or not, but I think it is). If you're connected to pc as activesync / usb drive just launch InternetSharing and the phone will switch to modem automatically. Once you disconnect IS the phone will go back to the activesync / usb drive mode.
Don't be afraid to explore your device (and the manual ) - it looks like you don't know about a lot of its features.

I have just flashed back to the official ROM.
The usb2pc do have 3 options. But the cooked rom like Dutty's 3.3 ROM
have only 2 options without internet sharing.
I am aware that I could run share internect, but it is much better if things
can be controlled in under one control page.

Ok, I'm having a problem with this feature... The USB to PC popup is stuck on internet sharing and it won't let me activesync and it's just really starting to make me angry... argh... I've tried going into the registry to change it but I don't know which value to change. I would love to disable the usb to pc altogether except activesync functions. Could anyone help me? I'm using 6.5 v23017.

Nevermind...lol I fixed it. I manually put it in bootloader mode, and flashed athiene os v23409.

yeah and i dont think that the ics option will appear unless ur phone has been given it sim info

XGX5309 said:
Ok, I'm having a problem with this feature... The USB to PC popup is stuck on internet sharing and it won't let me activesync and it's just really starting to make me angry... argh... I've tried going into the registry to change it but I don't know which value to change. I would love to disable the usb to pc altogether except activesync functions. Could anyone help me? I'm using 6.5 v23017.
Click to expand...
Click to collapse
Is there a solution to set it back to Active Sync without Internet Sharing other than flashing a new ROM?
I do not get the USB2PC-Popup anymore and my USB2PC dialog (Settings->Connection->USB2PC) is somehow incomplete (Can't see the "Ask me first .."-Dialog).
Is there a registry hack or something? I'v been googling for hours and I'm pretty sick of it right now.
Appreciate any help, thank you guys.
// edit says:
Found a registry entry:
HKLM\Software\OEM\USBtoPC
my Values are:
AskConnect: 1
Device_Type: 2
DisablePopUpUI: 0
EnableAdvanceChecked: 0
SyncMode: 1
Still nothing ...
//:edit 2
Yeah, well ... I flashed it.

[Q] please help! can't sync my HD with PC

I need help:
I can't sync my HD with PC to root, maybe the cabel is problem, it is working for battery charging, but when I plugin in to PC nothing happand (dosn't recodnise it)
Is there any other way to root my HD without sync it with PC? PLEASE HELP

kiretocin said:
I need help:
I can't sync my HD with PC to root, maybe the cabel is problem, it is working for battery charging, but when I plugin in to PC nothing happand (dosn't recodnise it)
Is there any other way to root my HD without sync it with PC? PLEASE HELP
Click to expand...
Click to collapse
1. Soft reset your HD & restart your PC. If not working,
2. Go to HDsettings/connections/USB to PC and un-tick "Enable faster data sync".
Maybe it will work...

Also, go to connection settings in activesync and ensure that "allow usb connections" is enabled

thanks man, but I try that a million time but dosn't work (I have expirience with rooting and flashing roms on my xperia)

it is set just like that but still dosn't working any other idea?

FIREWALL - can block comunications.

It would also help if you state your PC OS.
From ActiveSync I guess it's Windows... but which one?
And does your PC recognize HD in "disc drive mode"?
Ah... I have not heard it yet, but antivirus may be guilty here too...

i try on windows xp, i try on windows 7 but nothing happands when I plug in it in to the PC in every mode, disc drive, active sync...

and i try it with disabled firewall and my anti virus but still nothing, but usb port is working for charging the battery

i recommend for u a program its name (pim backup) its making a backup for ur contacts and calender and call history and all ur favorites things
try to search it and if i find it i will send u the link its petter 1000 times then the active sync

1. Try another USB cable
2. Try on another PC
Regarding PIM Backup I also recommend it, but it can not replace sync with Outlook...
Umm... I guess you use original HTC ROM, since you want to "root it". Which ROM?

I need active sync to root my hd not to beck up files from my phone, can this program do that?

Yes I am using original ROM version:1.14.479.3(25874)wwe
radio version:1.09.25.14
I had tryed on 3 diferent PC's everywhere is the same, but I don't have another cabel to try
and i have new problem, I lost signal of the network on my HD, my phone is dieing
NEED A HELP!

If you're having problems connecting the phone to your PC via USB, and now it's having connectivity problems to your network provider, I'd say it needs a visit to the service centre for repair.

I think that is my only solution

try to wipe device and hard retart your device

Hm, yes... if hard reset does not help, then service is the next step...
And any mini USB cable will do... I'm using one from my Olympus camera...

I try hard reset million times, still nothing... thanks guys but I think that the servis is the only solution

I have try with another usb cable, but still nothing, the problem is not in the cable...

Then it's service...