[Help]!! my htc wing dont want power up.!! - Wing, P4350 General

heyy.! please i need help, i got my cell hard-spl an flashed with WM6.5.1. I wanted to change the room for another, but when I went to do my pda presento in the screen "reading sd card" and stayed for a long time, i disconnect it without knowing and not want to start now.! please S.O.S i need help fast.!! somebody help me please.!! (sorry my bad english, im latino ) Plizz.!!

Herinso94 said:
heyy.! please i need help, i got my cell hard-spl an flashed with WM6.5.1. I wanted to change the room for another, but when I went to do my pda presento in the screen "reading sd card" and stayed for a long time, i disconnect it without knowing and not want to start now.! please S.O.S i need help fast.!! somebody help me please.!! (sorry my bad english, im latino ) Plizz.!!
Click to expand...
Click to collapse
Try flashing again through SD Card, you probably interrupted the flash.
What screen does it show when you try powering it on? As it tries to boot up, you can follow #5 from the Flashing via SD Card Instructions, and it should take you to the screen where it reads the SD Card.
Make sure you put the NBH file onto the card properly.

Related

PLEASE HELP Failed ROM update - Gives me blank screen

During the flashing process my Qtek complete gone, no ROM available I just get blank screen, my question is, could I use other Qtek to back-up ROM to the SD card or hard disk (with new program), after then I can use this back-up to restore my ROM? Or What I can I do to restore the Qtek to a factory default state?
Thanks
im sure u can, atleast I did on my t-mobile ppc.
if u cant write to SD card... take the card to a dealer or
show room display, insert the card, boot to bootloader (reset +push on)
and write urself a boot image on your SD card...
i know it worked for me !
What ROM you are talking about CE or GSM ?
hello
please find some information about Flashing your Qtek ROM using the 'SD Card' or 'Bootloader' Method
http://www.xda-developers.com/forum/viewtopic.php?t=1717
i hope this could help to recover your device back to normal but if it was GSM or Radio upgrade there's another method you can use the search tool here to get it and how to fix it
best regards and good luck
Othman
www.pocketpc4arab.com
Thanks
I was away some time I just come back. Let me to try, hope I could do it
What ever result of course I will let you know, this my help others too,

Help please.. SD Card flashing

My PC's activesync crashed and hanged while flashing the ROM. Now the xda is stuck with Updating screen.
Can someone please tell me which file to download from Jeff's kitchen (nk.nb1 or nk.nbf or anything else) and how to write it to SD card for flashing.
I tried to write nb1 and nbf both, using xda-tools, but it is not copied in the format required by the bootloader. In fact, in either case it is copied as a file which is not identified by the bootloader (my version is 5.15). boootloader starts with GSM OK message, and does not give me option to flash the ROM.
Can someone please please tell me how to do it?
you need SD card writer or a SD backup from another XDA.
cgigate said:
you need SD card writer or a SD backup from another XDA.
Click to expand...
Click to collapse
Thanks.
I was about to go to the service centre for rom image from another xda, but I decided to give it a try using usb cradle, and ran the original upgrade program. It came out with error and asked me to soft reset the device and try again, which I did, and it worked. I now have a working xda!

Help me fix my paper weight

Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Hi,
If you tell me how to make a SD image I will make one for you.
thanks for offering help. I am out right now, when i get home i will do a search and find out how to do it. In the meantime if anyone has any links for backup rom image to sd for wm5 and how to save this image to a file and then to write the image file to sd card again. thanks again.
thanks for offering help. I am out right now, when i get home i will do a search and find out how to do it. In the meantime if anyone has any links for backup rom image to sd for wm5 and how to save this image to a file and then to write the image file to sd card again. thanks again.
ok got some links for backing up to sd card and writing the image to file:
http://forum.xda-developers.com/viewtopic.php?t=32866
There are instructions on the 7th post in this thread.
http://forum.xda-developers.com/viewtopic.php?t=43399
This one has instructions on the 8th post.
Thanks
jeeb75 said:
Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
1. Put the phone in bootloader mode (make sure battery is over 50% charged).
To do this, press the Camera button down, hold it there, and press soft reset. Let off the soft reset button BUT continue to hold the camera button down until you see 4 color bands on the screen. Let go of the camera button when they appear.
2. Connect USB cable to PC.
3. Re-run imate JAMin full flash .EXE file. Should work fine and get you back to normal.
jaxf250 said:
jeeb75 said:
Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
1. Put the phone in bootloader mode (make sure battery is over 50% charged).
To do this, press the Camera button down, hold it there, and press soft reset. Let off the soft reset button BUT continue to hold the camera button down until you see 4 color bands on the screen. Let go of the camera button when they appear.
2. Connect USB cable to PC.
3. Re-run imate JAMin full flash .EXE file. Should work fine and get you back to normal.
Click to expand...
Click to collapse
Thanks for your help. I tried that before 5 times and the phone would get stuck on the boot splash screen. Now I cannot even get the phone into bootloader mode anymore unless it is plugged directly into the outlet. I do not know why it is doing this. I have charged the battery all the way. I also have a magician so I have tried 2 different batteries charged all the way. Since I can only get the bootloader mode while it is plugged directly to the wall, I cannot connect it to the pc. I have no idea why it is doing this. I just want to try restoring from an SD card rom backup before I send it in to imate.
I have made a sd image from my ROM and uploading it now. It's about 54 MB. I also tested to flash my Imate with this card and it works good. When you enter bootmode with the sdcard inserted it asks if it should restore from card. At this point press the comm manager button (the button under the volume control).
It's a image on a 128 MB SD card. You just have to write the image to your card with ntrw.
Good luck and let us know the results!
swartb said:
I have made a sd image from my ROM and uploading it now. It's about 54 MB. I also tested to flash my Imate with this card and it works good. When you enter bootmode with the sdcard inserted it asks if it should restore from card. At this point press the comm manager button (the button under the volume control).
It's a image on a 128 MB SD card. You just have to write the image to your card with ntrw.
Good luck and let us know the results!
Click to expand...
Click to collapse
Thank you so much!!!! I really appreciate it. I just hope it works. If it does not work for me at least others can get this sd image to fix their prophets in the future if they cannot get it to connect to their PCs. I will let you know my results.
Do you know if the device has to be unlocked already or can you use this to get around the CID lock?
The SD card flash did not work for me. I was hoping the RGB color screen was the bootloader but it was not. I guess there is something wrong with my JAMin so I am sending it in to imate in the middle east. I would like to thank Swartb for taking the time to get the ROM image on SD card.
To answer the CID lock question, I think it does not bypass it so if you want to use the SD card to restore it has to be the same phone model so in this case the JAMin.
Hi!!!! could you tell me where is that SD copy of your ROM????
Thnaks!!!!!!

Extending RAM

Hi , i have been using HTC P3300 for a while. Actually i am satisfied overall. But when i started to use Opera usually i am facing with "out of memory" message. Also when i use IGO8 memory is reaching its limits.
Therefore i would like to learn if there is some way to extend the RAM of my device ?
If you search the site you are ganna see
YuE Extraclean ROM 4.4, download it, change it pagepool to 4, install it through SD card after backing up all contacts and msgs, then you will enjoy enough RAMs.
thanks a lot, i already downloaded the file but i dont know how to install it. would you please explain step by step.
thanks in advance
hi,
i am trying to flash my device using SD card but when i follow the instructions in Wiki i cannot do it. I am pressing the record button down and pressing the RESET button as explained. And suddenly i can see a white screen with "searching for sd card" message then it switches to the 4 coloured screen which indicates the version information and it freezes as it is. I had doubt about my sd card but when i turn on the device i can see there is no problem with it.
Would you please suggest how can i flash my device with SD card ?
Or would you please tell the best way to learn how to upgrade my device with a ROM.
thanks in advance.
ozkemal said:
hi,
i am trying to flash my device using SD card but when i follow the instructions in Wiki i cannot do it. I am pressing the record button down and pressing the RESET button as explained. And suddenly i can see a white screen with "searching for sd card" message then it switches to the 4 coloured screen which indicates the version information and it freezes as it is. I had doubt about my sd card but when i turn on the device i can see there is no problem with it.
Would you please suggest how can i flash my device with SD card ?
Or would you please tell the best way to learn how to upgrade my device with a ROM.
thanks in advance.
Click to expand...
Click to collapse
I hope you have named the ROM file as ARTEIMG.NBH and copied it to the SD Card 's root?
Also, have you formatted your SD Card to FAT32?
yes i did it. but when it starts to flash, after a while it says "unknown certificate" ,
what shall i do ?
ozkemal said:
yes i did it. but when it starts to flash, after a while it says "unknown certificate" ,
what shall i do ?
Click to expand...
Click to collapse
did you do the USPL first?
if not see this post.http://forum.xda-developers.com/showthread.php?t=311403
you need to download the USPL and then run it after it finish do the flash.

Stuck on Stick Together Screen

Hey Guys, Im new to the HTC HD2.
I got this phone from a guy at my shop. The previous computer guy did this to the phone and he said if i fixed it i could either buy it or sell it. I am sorry i do not have much information or the specifics to what exactley happened but i do have two pictures that i am including.
I have tried hard and soft reset. Also i have tried to restore to factory settings. I have a 4 gb sd card if needed. The phone is stuck at the stick together screen.Also there is no Serial when i am in the tri color boot screen. Also the phone will not connect via activesync nor will it sense it at all. The computer i am doing all of this work on is a 32bit xp os.
Any help or information would be appreciated.
The Phone is already HSPLed, but the issue you say you cannot establish a connection with PC, did you try the SD Card Flash method? That is by placing your Stock ROM NBH in the SD Card and flash it from there? Just check the General Forum, you will find the step-by-step procedure there.
So your saying do something like this?
http://forum.xda-developers.com/showthread.php?p=11097380
And also i do not know all the phone terms. The last time i was here was back in 08 when i had my htc fuze. If you would please direct me in a specific way.
Maniax53 said:
So your saying do something like this?
http://forum.xda-developers.com/showthread.php?p=11097380
And also i do not know all the phone terms. The last time i was here was back in 08 when i had my htc fuze. If you would please direct me in a specific way.
Click to expand...
Click to collapse
No that link you posted is to instal Android on the HD2. Seeing as you do not know the history of the HD2 youcshould go back to stock first. Go the links I post below and follow my instructions. Go to this link to get your ROM. Look under batterry for IMEI number, ROM downloadclink in step 4.
http://support.t-mobile.com/doc/tm54430.xml
Right click on the file you download and rename it from a .exe file to a .zip file. Then right click it again and select view/explore which ever one you see and find the.RUU_signed.nbh file and copy it to a micro SD card of 8 gig and under formatted Fat 32. Once it is on the micro SD card rename the file to LEOIMG.nbh and then put the micro SD card in the HD2. Boot the HD2 into bootloader and when you see searching on the screen of the HD2 and let go of the volume down button and it should ask you of you want to flash the image, press the end button to comfirm and the ROM will flash. Be advised though this will remove HSPL from the HD2.
Here is a link to the flashing by SD card thread.
http://forum.xda-developers.com/showthread.php?t=681317
Thank you so much!Got it booted back to stock.
Maniax53 said:
Thank you so much!Got it booted back to stock.
Click to expand...
Click to collapse
Glad your phone is back

Categories

Resources