I face a problem with my device when I open the bluetooth. When I open them everything is ok, but when I try to close them, the device stuck with windows logo on the screen. After that I can't open the Comm Manager or use its features.
If anyone knows something please help......
Have you tried to hard reset?
This problem is not known in the community.
Which ROM are you using?
Yes I tryed hard reset, but the problem remains. I have tryed a lot of ROMs but all had the same resault, even the original one.
Related
my o2 mini sometimes is searching. why? help me pls...
what do you mean by searching? searching for what? signal or bt devices?
bluetooth problem!
my o2 mini bluetooth, "there is no bluetooth hardware installed in this device" now i can't use my bluetooth. why? help me... plz...
maybe a soft reset may help. i think it is a common problem with Magicians. Sometimes it is because of a software you may have installed. Try doing a soft reset and restarting your bluetooth.
help
softreset is not change anything. i still can't use my bluetooth. i never installed any software. is hardware broken?
i am not sure since i get the same error and i have a lot installed. have you tried a hard reset? (to do this: stylus in soft reset button while pressing power button until screen fades, wait a few seconds then soft reset your device)
StartUp
How many startup applications do you have Bro?
Check in
\Windows\StartUp
folder.
Remove unnecessary ones.
I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?
i am on the pc for 8-10 hours to solve the problm on this ****ing s200, after a hard reset the device start to work well , but when i ll do a soft reset it could not establish a connection with the pc again moreover "error opening the shortcut or locating the target filename" is shown when i click the comm manager button. i assume that it may be a problem because of the rom version, although i search all the forum and some other sources i cant find a s200 rom which is working, finally i installed the altest version of 818 pro 2.15.13.27 which i founded in the forum. then when i install some software and make a soft reset the device refuse to open and the calibration screen is shown. i dont know what is happened but i am sure that there are some hardware problem. i dont know if somebody else have this kind of problem?? i have also a jamin and it works perfectly with its latest rom. finally give a few dollars more and buy jamin if you really want to use those htc staff...
ps: I am not sure but maybe if s200 ROM will be installed the problem is solved but it refused to install an older rom , now all the soft reset cause the setup screen of windows!!!
hello,i got a big problem when i turn my htc it turns on and is alright for the moment, but after when i try to turn wifi on or audio manager it hang on and next turn of or i need to do soft reset,sometimes it vibrate and turns of after when everything load up,please help me solving this problem.
ms2405 said:
hello,i got a big problem when i turn my htc it turns on and is alright for the moment, but after when i try to turn wifi on or audio manager it hang on and next turn of or i need to do soft reset,sometimes it vibrate and turns of after when everything load up,please help me solving this problem.
Click to expand...
Click to collapse
I would have probably just done a hard reset to see if that solved the problem. This would be too annoying for me to handle and I wouldn't want to put up with that. I don't know what apps you have installed but perhaps you have something trying to launch at the same time when you turn WIFI on or Audio Manager - Strange that it happens for both of these. Perhaps you have apps trying to obtain updates or trying to connect to internet automatically once you turn WIFI on and this is causing your system to become too slow and unresponsive as it is trying to do too much at once. (doesn't explain audio manager I know) - I havn't experienced this problem myself thankfully -
now when i try to turn it on it needs few times just to boot up but when it boot up it is just hanging up after few seconds or minutes i have done few soft reset and hard reset and it doesn't help i don't know what to do.
That sounds buggered to be honest. Seems like a hardware error. I've dropped mine from about 50ft before, but it was grass. So I don't know how it really affects it. You say it vibrates when you try to turn it on?
Well, first thing I'd try is taking the battery out, then a hard reset. From then on, flash a different ROM and hard reset again after.
but i don't know how to flash the rom can you send me a link to instructions coz i am new on this forum,already i founded from the opal one,but i can't find a instruction under,can you help me.
ms2405 said:
but i don't know how to flash the rom can you send me a link to instructions coz i am new on this forum,already i founded from the opal one,but i can't find a instruction under,can you help me.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/
Start reading through the WIKI to learn about flashing ROM
Do not flash OPAL Rom to Elfin - ROMS are device specific ELFIN ROM for ELFIN Device
Hi guys.
I recently installed Onyx Micro on my Elf, and it's been great. I needed a "Home" panel though, so I installed a Home application that I had on my memory card, and after that reset, my phone's been unusable. When i turn it on, it either hangs, or gives me an error that says something to the effect of "phonesyslog has malfunctioned", and then freezes.
I can't get it connected with Actiesync, I can't hard-reset it either. Any idea what I can do?
Can anyone help me?
Hi,
Did you try removing the memory card? In case that doesn't help, try pressing the camera button while starting up, this should enter the bootloader mode, which enables you to flash a new rom. Do this in Windows XP, as Vista can cause problems. If you've never flashed a rom, try searching this forum for an appropriate rom and a how-to-guide.
Regards,
murosama
Hard reset should work and should be all you need to solve your problem. Make sure that you are performing the hard reset correctly.
For a hard-reset without access to the systems menu do the following:
Make sure the device is switched off, then press both the green and the red phone button and while keeping them pressed switch on the device.
A menu should appear, asking you to confirm the hard-reset.
(Upon confirmation, all data will be erased and the out-of-box state will be restored.)
In case that doesn't work, try flashing a rom that is native to your device
(as suggested above).
Good luck,
murosama
I got the same problem i tryed all off this but didn`t work did you find a sollution for yours?
I recently reloaded the os to a different version and found that now the screen does not work. The keys work and everything else works except for the touchscreen. I am trying to find Windows Mobile 6.0 professional but i can't find it anywhere. I have Windows Mobile 6.5 but I have no idea if i can load it successfully. If so do I need load a special or something? Any help is great.
Same problem with my HTC touch as well
I'm also facing same problem.
I hav tried hard reset, flashing ROM with new version but nothing works!
When I start my elf, it ask me to tap the screen. when I tap it, it will go to screen where you calibrate the screen, after that nothing works.
but backlight turns on when I tourch the screen.
I still trying to figure out what is the problem with my elf.
Pls adive if you find any info on this.
I love this phone, I dont want to lose it
Thanks
Pawaria
Hard reset and see what happens:
http://www.flickr.com/photos/ryjones/2193904710/