my o2 mini sometimes is searching. why? help me pls...
what do you mean by searching? searching for what? signal or bt devices?
bluetooth problem!
my o2 mini bluetooth, "there is no bluetooth hardware installed in this device" now i can't use my bluetooth. why? help me... plz...
maybe a soft reset may help. i think it is a common problem with Magicians. Sometimes it is because of a software you may have installed. Try doing a soft reset and restarting your bluetooth.
help
softreset is not change anything. i still can't use my bluetooth. i never installed any software. is hardware broken?
i am not sure since i get the same error and i have a lot installed. have you tried a hard reset? (to do this: stylus in soft reset button while pressing power button until screen fades, wait a few seconds then soft reset your device)
StartUp
How many startup applications do you have Bro?
Check in
\Windows\StartUp
folder.
Remove unnecessary ones.
I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?
Related
i am on the pc for 8-10 hours to solve the problm on this ****ing s200, after a hard reset the device start to work well , but when i ll do a soft reset it could not establish a connection with the pc again moreover "error opening the shortcut or locating the target filename" is shown when i click the comm manager button. i assume that it may be a problem because of the rom version, although i search all the forum and some other sources i cant find a s200 rom which is working, finally i installed the altest version of 818 pro 2.15.13.27 which i founded in the forum. then when i install some software and make a soft reset the device refuse to open and the calibration screen is shown. i dont know what is happened but i am sure that there are some hardware problem. i dont know if somebody else have this kind of problem?? i have also a jamin and it works perfectly with its latest rom. finally give a few dollars more and buy jamin if you really want to use those htc staff...
ps: I am not sure but maybe if s200 ROM will be installed the problem is solved but it refused to install an older rom , now all the soft reset cause the setup screen of windows!!!
Hello,
I just uninstalled the Arabic support package (Pocket Arabizer Suite v2). Afterwards, I am not able to use my wing to make calls. I even tried to search for network and couldn't find any. I was thinking if I reinstall the Arabic package might help. Unfortunately, ActiveSync is not working no more as well. Also, I tried hard reset (by holding the 2 soft keys along with soft rest) but it wont reset.
Anyone got a clue ?
When you hard reset did you keep holding down the softkeys after you pressed the soft rest button? When done correctly a prompt to soft reset should come up after about 5 seconds
yes, I did
no one got a clue?
Go into bootloader mode and run the TMO RUU.
I was tryin to avoid that. But, I just done it
Thanks
i forgot my password after upgrade my wm5 to wm6. i tried to to use spl to flash my phone but my pc cant open my device because my device is locked so the activsync cant do anything.
someone can help me plz!!!!!!!!!!!
*edit* i try to hold the camera and com man buttons adn the same time and press reset button. but it doesnt change
Firstly, I can't see how resetting the device will help you with your problem.
Secondly, how far into a reset do you want to go? Do you want to reinstall the OS or something slightly less drastic?
i just want to open my password. then i will upgrade my phone to wm6 with PIN
Did you set a password after flashing WM6? I've heard that if you do so, your device forgets your password after a soft-reset, and nothing will help your problem besides a hard reset.
Hi have a slight issue with my Mini s, i believe its the wizard. When i go to send txt messages it tells me the phone is not ready and i have to wait 15 seconds, so i cant send msgs, i can still ring in and out, also when i try to go to phone settings it tells me to wait 15 seconds and try again, when i go to sim manager it tells me to again, wait! I believe at the moment it is flashed to 02 with an orange sim in it, its the G4? version. Its running wm5 i think, if i could have it flashed to orange on wm6 that would be great.
Any help on how i can overcome this problem would be great. Thanks
Matt
Perform Soft Reset first,check if it solves the problem, or Hard Reset,but remember you'l llose all your personal data by doing hard reset,but it might solve the problem.If nothing works,than its corruption of the extended_rom,you might have to reflash a rom.
To upgrade to wm6 read the guide posted here at xda-wiki ,be careful,if you say its a G4 device,its a bit sensitive device:-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
rite ok ive already tried a soft reset but it didnt work, sorry i havent got a manual for the phone so how do i do the hard reset? also if so how do i reflash the rom, any guidance would greatly be appreciative.
Thanks
Hard Reset
Hardreset for Wizard is by pressing: Comm button + Voice command button and slightly push the softreset button with stylus.
Guide to flash a rom is posted in my above post.
you should reflash your rom I also has same issue and reflashing solved the problem.
I face a problem with my device when I open the bluetooth. When I open them everything is ok, but when I try to close them, the device stuck with windows logo on the screen. After that I can't open the Comm Manager or use its features.
If anyone knows something please help......
Have you tried to hard reset?
This problem is not known in the community.
Which ROM are you using?
Yes I tryed hard reset, but the problem remains. I have tryed a lot of ROMs but all had the same resault, even the original one.