i am on the pc for 8-10 hours to solve the problm on this ****ing s200, after a hard reset the device start to work well , but when i ll do a soft reset it could not establish a connection with the pc again moreover "error opening the shortcut or locating the target filename" is shown when i click the comm manager button. i assume that it may be a problem because of the rom version, although i search all the forum and some other sources i cant find a s200 rom which is working, finally i installed the altest version of 818 pro 2.15.13.27 which i founded in the forum. then when i install some software and make a soft reset the device refuse to open and the calibration screen is shown. i dont know what is happened but i am sure that there are some hardware problem. i dont know if somebody else have this kind of problem?? i have also a jamin and it works perfectly with its latest rom. finally give a few dollars more and buy jamin if you really want to use those htc staff...
ps: I am not sure but maybe if s200 ROM will be installed the problem is solved but it refused to install an older rom , now all the soft reset cause the setup screen of windows!!!
Related
my o2 mini sometimes is searching. why? help me pls...
what do you mean by searching? searching for what? signal or bt devices?
bluetooth problem!
my o2 mini bluetooth, "there is no bluetooth hardware installed in this device" now i can't use my bluetooth. why? help me... plz...
maybe a soft reset may help. i think it is a common problem with Magicians. Sometimes it is because of a software you may have installed. Try doing a soft reset and restarting your bluetooth.
help
softreset is not change anything. i still can't use my bluetooth. i never installed any software. is hardware broken?
i am not sure since i get the same error and i have a lot installed. have you tried a hard reset? (to do this: stylus in soft reset button while pressing power button until screen fades, wait a few seconds then soft reset your device)
StartUp
How many startup applications do you have Bro?
Check in
\Windows\StartUp
folder.
Remove unnecessary ones.
I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?
hi all , need help for fix error .
I have upgrade my qtek rom to o2 exec rom with ma_ui, the process end without problem .
After cold reset the screen freeze on splah screen O2.
Try hard reset with key left , right + reset confirm restore factory default ?
try YES Clearing
Reboot but screen freeze anyway
WhY??? :evil:
the device is lock on the O2 splash screen!!!!
help for reflashing device !!!
piero60 said:
hi all , need help for fix error .
I have upgrade my qtek rom to o2 exec rom with ma_ui, the process end without problem .
After cold reset the screen freeze on splah screen O2.
Try hard reset with key left , right + reset confirm restore factory default ?
try YES Clearing
Reboot but screen freeze anyway
WhY??? :evil:
the device is lock on the O2 splash screen!!!!
help for reflashing device !!!
Click to expand...
Click to collapse
what kinds device you had ? do you used noid.exe to flush ?
connect your ppc to pc and flush again
i have qtek 9000 as htc universal , the ppc is connected to pc. new hardware found but windows dont recognize the hardware!. also noid.exe don't find the hardware for flashing..
piero60 said:
i have qtek 9000 as htc universal , the ppc is connected to pc. new hardware found but windows dont recognize the hardware!. also noid.exe don't find the hardware for flashing..
Click to expand...
Click to collapse
Try to soft reset , just push reset buttom
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
please help! I have made a wrong ROM Update for my Artemis. The result is that it doeasn`t starts anymore. I see only the start screen no more. If i make a SW or HW reset tahn i see a 3 colored screen and USB. But i don`t get a connection via usb to my compute`! How can i wake up my Artemis ???
tell use more what did you do and how did you do it?
what artemis is it?
what rom was it
Flash went sour..
You need the original ROM which was on your device when you bought it. What version (HTC, MDA, etc..) and what language was the original ROM?
please i need help too
I guess I made the same or a similar mistake that dr.moppi did. My machine is a Dopod P800 from mainland china with the chinese operating system. I flahsed it with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap. Don't really remember what the original ROM was but now when i turn it on it freezes when it lights up. On the screen, it says
IPL 1.27.0001
SPL 1.27.0000
GSM 02.67.90
OS 1.28.0.0
DOPOD
I don't get a connection through usb to the computer either. I am not sure if I did the hard reset correctly. Didn't understand the instruction on that "press the soft key left and right and soft reset at the same time." Anyway, you guys are all experts, can you help me please?
it should be the same as my problem
if i remeber than i used the same ROM Update :-(
I hope anyone could give us a solution, please.
@dr. moppi we can only help you if we know what version you had before.
@empathyvirus you have to look for the original ROM which, in your case, should be the Chinese Dopod ROM. Install that one and your good to go.
Without the original ROM the only thing left to do is: sending your device to your provider or contact and sent it to the guys of imei-check. Either way, you'll probably have to pay to get it fixed.
how to install original rom
Thanks for your quick reply Pyth. In the case I get the original ROM from somewhere, how do I install it if I can't get a connection between the phone and my computer? Can you advice?
Put your device in bootloader by pressing the record button and reset at the same time. If you have your USB-cable connected between your PC and your phone it will indicate a connection by 'USB' in the left corner of your device. Now you should be able to run the ROM executable and update your device.
thanks anyway
i tried but it didn't seem to work. anyway, i have troubled you enough and maybe it's best i just go to the repair centre of dopod and pay for a fix. i really appreciate your help though Pyth.
Where can i find the t-mobile rom its the MDA Compact III that wont start for me
I have received one elf with is stucking on calibration menu,everytime that i press all the 5 positions again it keeps on asking for it and i cant get to the phone.
Phone is detected by activ syn ,i want to upgrade the rom but as i'm having this problem i cant upload cert and enabl files.I cant do hardspl nothing.
Is there anyway i can repair this phone.It has got 2.26.00 spl.
Regards
I had the same problem.... but I just hard reset my phone with the styles and started my phone again and then pu it fast on my computer and started the upgrade to 2.28 and the my phone worked correctly.
Maybe I've made some mistakes but that's because im 13 and I live in Holland
I hope its good information for you!
hi sonkar read this thread http://forum.xda-developers.com/showthread.php?t=445666
i agree with marcbrug .. try to do a hard reset .. that is by holding the End & the Call Buttons and soft reseting the phone.. when the confirmation msg appears press the "Middle" (the largest) button..
hope that helped...
I have already done the hard reset,it's the first thing i did but still facing same problem.
sonkar said:
I have already done the hard reset,it's the first thing i did but still facing same problem.
Click to expand...
Click to collapse
It's happened to me a couple of times. I just re-flashed the ROM (hard reset did not work).
Can you explain how i can flash the rom?
Cos as the phone gets stuck in calibration i cant install cert and cab files in the phone.So i cant do hardspl and neither flash the rom.My spl is 2.26.00.
Regards
sonkar said:
Can you explain how i can flash the rom?
Cos as the phone gets stuck in calibration i cant install cert and cab files in the phone.So i cant do hardspl and neither flash the rom.My spl is 2.26.00.
Regards
Click to expand...
Click to collapse
You could probably still install it manually if you are able to connect to ActiveSync during the screen calibration.
First, try installing "myMobiler" which allows you to access the phone from your PC (like in Remote Desktop). See if you can get any further than the calibration screen with that.
Otherwise, download the "itsutils" package from here:
http://www.xs4all.nl/~itsme/projects/xda/tools.html
Then, use "prun" to remotely launch the CAB file from the DOS window:
e.g. C:\> prun.exe \Windows\myfile.cab
I have never tried this command with CAB files but it worked with Windows Mobile EXE files.