Related
I have just bought a usb Wifi dongle, and a Mini to USB socket.
The whole lot was only £20.
I thought it was worth giving it a go, but so far having no luck.
Anybody any ideas? reasons why it wont work? how it could work?
Cheers
I think the problem might be that neither the Magician nor the dongle has USB host capabilities.
I have heard that all Windows 2003 SE devices have USB host capabilities (mass storage drivers rigth?).
Check this thread... http://forum.xda-developers.com/viewtopic.php?t=15453
Jez said:
I have heard that all Windows 2003 SE devices have USB host capabilities (mass storage drivers rigth?).
Check this thread... http://forum.xda-developers.com/viewtopic.php?t=15453
Click to expand...
Click to collapse
All WM2003 SE devices with USB host capabilities have mass storage drivers, making it possible to connect an external USB drive. As far as I know (which is also said in the thread you refer to) the hardware of the Magician does not have USB host capabilities.
mmh, i don't think you need a special chip to do the host-usb.
it's all a matter of drivers i think, since you can communicate from/to the pda using usb (like active sync)
dutty said:
mmh, i don't think you need a special chip to do the host-usb.
it's all a matter of drivers i think, since you can communicate from/to the pda using usb (like active sync)
Click to expand...
Click to collapse
Active sync works because the PC has the ability to act as a USB host.
From a USB perspective the Magician (and I think all of HTCs PPC phone devices?) acts just like any other dumb USB device. Like a mouse, or a Bluetooth dongle. And just like you will not be able to pair a USB mouse to a BT dongle to get a BT mouse you can not get the Magician to pair with another non host USB device.
rugrug said:
bene
ti ricordi più o meno quando lo hai preso?
è tutto di serie (SuperCombo con GP750 ? GP780? e servo di coda DS420) oppure hai cambiato qualcosa ?
poi ti aggiungo alla lista insieme a Consuelino
Click to expand...
Click to collapse
Preso a gennaio 2012, di seguito le modifiche:
- gyro Align GP790
- ESC Hyperion Atlas
Il resto é tutto di serie come uscito di scatola
Just a matter of compatible drivers for the OTG USB devices on Windows Mobile platform. Development on it stopped long time ago, so i believe that this is not going to be possible unless someone individually takes it up as a project.
I've bought today a Qtek S200.
IPL/SPL: 2.09.0000
GSM: 2.07.20
OS: 2.9.7.28
The first I did was a Hard Reset to the Qtek S200 and then...
Because of the problems with some application and antivirus I did a complete format to my computer. I just installed WinXP PRO SP2, all the updates from Microsoft Update, .Net Framework 3, Outlook 2002 and ActiveSync 4.1 (both came in the CD from Qtek). (I have also disabled Windows Firewall).
Then I think, I've done all the steps right (I think):
1) I connected the USB cable to de PC
2) I tried to plug the USB cable to the Qtek S200 when te PPC was OFF and nothing happened. Then with the Qtek S200 ON (in today's screen) I plug the other side of the USB cable and ActiveSync does not recognize my S200.
I dunno what to do to make ActiveSync syncronize with my Qtek S200, could you please help me???? I've been trying to syncronize for more then 6 hours (doing all the stuff...)
THNX,
Annita
Try this:
remove your activesync (de-install the software)
reboot your pc
turn on your qtek without the usb cable attached
plugin your qtek on the usb cable.
Does you pc find the device ?? (ding dong sound)
yes ? good, your pc finds it.
take out the usb again
install activesync 4.2
http://www.microsoft.com/windowsmobile/activesync/activesync42.mspx
try again, and see if it works.
My PC does nothing when I connect the S200...
Annita
If the USB cable connection does not work, it is possible to update ROM via Bluetooth ActiveSync syncronization????
THNX,
Annita
Annita said:
If the USB cable connection does not work, it is possible to update ROM via Bluetooth ActiveSync syncronization????
THNX,
Annita
Click to expand...
Click to collapse
It might work, however I would first look into why you usb doesn't work
when you plugin the usb cable, do you see the phone charge ? (led ontop change to orange) you might have a bad cable or you pc has a problem with the usb port (have your tried another usb port ? or removing all usb devices and only using the phone cable ?)
Yes to all.
When I connect the USB cable, the Qtek begins to charge the battery, and the orange led flicks.
I have tried on my PC and on my Laptop and didn't work in any of both.
I have tried with only he USB phone cable and did not work either.
Anyone has tried to update ROM via Bluetooth???
THNX,
Annita
Annita, make sure you have DHCP turned on on your PC. The virtual USB NIC should come up as 169.254.2.2, I believe. I was never able to get it to work without using DHCP on the PC side.
What is the virtual USB NIC????
Annita
When you plug in the USB cable, the PC creates a "fake" network adapter for the PPC and adds that to your list of network connections.
Just make sure DHCP service is started. Right-click My Computer -> Manage -> Services and Applications -> Services -> DHCP Client.
OK, the service was and is ON.
The thing is that I can syncronize via Bluetooth, but not with the USB cable (and I have the original cable and another mini-USB cable).
Annita
Bluetooth Activesync Sycronization will not work b'coz while upgrading, the phone resets itself, N it powers on in the upgrade process therefore, bluetooth of the phone will not be available then.
So, I dont its possible 2upgrade via bluetooth Activesync.
OK, thnx.
Annita
anita and the usb
anita, go to start setting control pannel, go to phones and modems and see the modems are installed there. windows (sh***t) store all the garbadge possible. can be that it identfy usb device like usb modem and put it on com 1 not that active sync works auto on com1. so check connection settings on activesync. + which use port you use? fron pannel or the rear of the PC?
is that a laptop if yes what model.
i'll try to help as much as i can
xman
ok, i have the same problem as you do, or at least a similar. i cant get my sync to work...
active sync 4.2
active sync says "critical communication error, try restarting your device", the active sync troubleshoot tells me that i dont have a ip adress (the link to microsoft does not work), although i have a network connection that my pc created (169.254.2.2). the active sync even appears in green.
my firewall and the win firewall does not interfere with this. switching off the firewalls does not improve this at all.
does anyone know a solution to this? thanks
I'll try what xmanmaster says, but I'm not at home until sunday...
Thnx,
Annita
Did this problem ever get resolved? I have the same issues, tried a wizard and a hermes. Not detected as a usb device, the charging light comes on. Both phones work on another PC. I have tried uninstalling activesync and rebooting phone/PC in every order I can think of.
UPNP (Universal Plug 'n Play) service is required
Hi all,
please make sure that the UPNP service is running on the desktop.
It's required for device detection as well as synchronisation with the WCE device.
A quite detailed description of all potential problems with ActiveSync can be found at Chris De Herrera's website.
BR,
N.a.D.
Hi all,
yesterday my Universal fell from the table on the ground, and it fell directly onto the USB cable connector, which was plugged into the device at the moment. So now, the USB port on my Universal is acting pretty weird, it moves from side to side and it accepts the charger cable only under a very specific angle, so it is pretty difficult to plug the charger cable in correctly. I am going to get it repaired soon, but I want to backup my data first. The problem is, that the broken USB doesn't let me connect the device to my PC, as even if the status LED lights up as if it was connected and charging, I get the "device not recognised" error on my computer. Does anyone have an idea that could help me please? Thanks a lot in advance,
Longlife
Longlife said:
Hi all,
yesterday my Universal fell from the table on the ground, and it fell directly onto the USB cable connector, which was plugged into the device at the moment. So now, the USB port on my Universal is acting pretty weird, it moves from side to side and it accepts the charger cable only under a very specific angle, so it is pretty difficult to plug the charger cable in correctly. I am going to get it repaired soon, but I want to backup my data first. The problem is, that the broken USB doesn't let me connect the device to my PC, as even if the status LED lights up as if it was connected and charging, I get the "device not recognised" error on my computer. Does anyone have an idea that could help me please? Thanks a lot in advance,
Longlife
Click to expand...
Click to collapse
I would say download the trial version of Spb backup, and copy the CAB installer to your SD-card via an card reader on the PC. This way you don't need the USB connection. You can make a self-extractable full backup, just make sure that you have the same ROM installed before restoring. I hope this helps .
oh then get it fixed lol
i paid £10 for mine to be fixed (came straight off main board) from a local phone repairers
jarbi said:
I would say download the trial version of Spb backup, and copy the CAB installer to your SD-card via an card reader on the PC. This way you don't need the USB connection. You can make a self-extractable full backup, just make sure that you have the same ROM installed before restoring. I hope this helps .
Click to expand...
Click to collapse
Thanks a lot, I will try it as soon as I come back home from school
daddy k said:
oh then get it fixed lol
i paid £10 for mine to be fixed (came straight off main board) from a local phone repairers
Click to expand...
Click to collapse
Yeah, I'm going to get it fixed for sure but I don't want to risk losing my data if the mechanic did a hard reset or something.
Same problem, without the fall
My USB connector started acting up a couple of days ago. It's strange, because I dropped it once, but worked fine afterwards. Now, I need to jiggle the cable aruond for a bit before it actually makes contact
What do you think, how long does it take for them to fix it in a repair shop. Could I possibly wait for it to be finished?
I would suggest getting a Universal Battery Mobile Charger to charge the battery and a USB bluetooth adapter for the computer to sync.
Then if you decide to get it fixed just make sure it's from a reputable repair center. After the repair, I still suggest using the mobile Charger and USB dongle to charge and sync to lessen the stress on miniusb. Goodluck!
Reputable it will be! The T-Mobile shop I purchased it at!
And how long do you think it will take for them to fix it(the repair shop is right in the back of the store...)?
Four days ago, I took the phone to a one of a very few QTEK services in the Czech Republic and they promised to make me an price offer of the repair. They sent me an e-mail yesterday, and the price was..14,026 CZK, which is about 500 EUR accoridng to today's rates. They said that the whole motherboard needed to be replaced, because one part of it had been nicked. Anyway, I bought the phone on ebay for about 400 EUR and I am not really going to pay such a huge amount of money for the repair (I can get a brand new Universal for this price..or even cheaper). Do you think it's possible that the service was either mistaken or lied to me to make a higher profit? And, if a part of the motherboard really is snapped off, do you think it would be possible to fix it somehow? Thanks a lot,
Longlife
clemsyn said:
I would suggest getting a Universal Battery Mobile Charger to charge the battery and a USB bluetooth adapter for the computer to sync.
Then if you decide to get it fixed just make sure it's from a reputable repair center. After the repair, I still suggest using the mobile Charger and USB dongle to charge and sync to lessen the stress on miniusb. Goodluck!
Click to expand...
Click to collapse
Thanks, if I don't manage to get it fixed (see my last post) I'll probably do that. btw, I didn't see a BT connection option in my ActiveSync (and I think I have the latest version), do I need a special plugin or a different piece of software for the sync? Thanks,
Longlife
sorry,for writing in slovak,its easier and faster and longlife understands.
nazdar oprava tu v UK stoji asi 20gbp, odporucam ti v cexax najst nejaky mobil servis, tu na ftp najdes man na rozobratie uniho, a skus si cez net kupit usbfemale(vsetky su standartne). xod do sevisu a skus ix ukecatnex ti to opravia.btw mas ho v zaruke este?
If you want to use BT to sync, you'll need to map virtual serial ports to your adapter(this can be usually done from within the adapter's program, like BlueSoleil), and the configure ActiveSync to accept connections from that port. Afterwards, you need to start ActiveSync on your MDA, and select "Connect via Bluetooth", and voilá.
The catch is, you can't sync music this way. But that might be the smallest of your worries
phsnake said:
sorry,for writing in slovak,its easier and faster and longlife understands.
nazdar oprava tu v UK stoji asi 20gbp, odporucam ti v cexax najst nejaky mobil servis, tu na ftp najdes man na rozobratie uniho, a skus si cez net kupit usbfemale(vsetky su standartne). xod do sevisu a skus ix ukecatnex ti to opravia.btw mas ho v zaruke este?
Click to expand...
Click to collapse
Sorry for writing in Czech, but..you know
Kupoval sem to na ebay od nákýho němce, mám to ještě v záruce ale u německýho T-Mobile a dostávat to do jejich servisu by asi nebylo uplně jednoduchý. Každopádně si od něj nechám ty záruční papíry poslat a zkusim zatim obejít pár servisů tady v Praze. Dík moc
mzalan said:
If you want to use BT to sync, you'll need to map virtual serial ports to your adapter(this can be usually done from within the adapter's program, like BlueSoleil), and the configure ActiveSync to accept connections from that port. Afterwards, you need to start ActiveSync on your MDA, and select "Connect via Bluetooth", and voilá.
The catch is, you can't sync music this way. But that might be the smallest of your worries
Click to expand...
Click to collapse
Hi,
Can you please explain how to do it in BlueSoleil?
I have BlueSoleil (legal), and I've been reading, and trying everything, for hours, without success.
I've managed to get a bt connection between my laptop and my Universal, and one of the available service is indeed ActiveSync. And I can see AS trying to connect, when I click on "Connect via Bluetooth" in my PPC. But then it just stops, and my Uni says it didn't find a partnership with ActiveSync.
Any help, please?
TIA
Longlife said:
Thanks, if I don't manage to get it fixed (see my last post) I'll probably do that. btw, I didn't see a BT connection option in my ActiveSync (and I think I have the latest version), do I need a special plugin or a different piece of software for the sync? Thanks,
Longlife
Click to expand...
Click to collapse
Initially you have to open a COM port for the Bluetooth Serial Settings..and then when you open the COM port (like COM 5 or something), go to active sync Connections Settings and then check "Allow connections to following" and then choose the COM port of the Bluetooth Serial Settings (like COM 5 depending on what COM port you put the BT serial settings).
This might buy you some time till prices go down and you could have it repair for lower price.
GOODLUCK!
clemsyn said:
Initially you have to open a COM port for the Bluetooth Serial Settings..and then when you open the COM port (like COM 5 or something), go to active sync Connections Settings and then check "Allow connections to following" and then choose the COM port of the Bluetooth Serial Settings (like COM 5 depending on what COM port you put the BT serial settings).
This might buy you some time till prices go down and you could have it repair for lower price.
GOODLUCK!
Click to expand...
Click to collapse
Thanks Just one more thing..I will probably not be able to flash new ROM via BT, or will I?
Sorry no flashing via bluetooth only via USB. Not sure though if you can do it via SD if somebody builds an image of the ROM you want in SD then use that but not familiar with it on Universal.
Hello
I hqd the same problem happening to me : the connection between the mini USB and the motherboard were severed. I used stripping wire to redo the connections, and hot glue to make sure they don't break again.
You can certainly do the same. Please tell me if you need a spare mini USB connector to replace your broken one (got one ! you can also find one in any cheap USB reader)
Guylhem
Hi,
many thanks for your idea! I recently gave the phone to my grandmother's former student, who is an amateur electrotechnic. Hopefully, he will manage to mend it and if not, I will surely try what you have suggested. Just one thing..don't you need a special screwdriver to get into the phone?
Thanks, Longlife
guylhem said:
Hello
I hqd the same problem happening to me : the connection between the mini USB and the motherboard were severed. I used stripping wire to redo the connections, and hot glue to make sure they don't break again.
You can certainly do the same. Please tell me if you need a spare mini USB connector to replace your broken one (got one ! you can also find one in any cheap USB reader)
Guylhem
Click to expand...
Click to collapse
Longlife said:
Hi,
many thanks for your idea! I recently gave the phone to my grandmother's former student, who is an amateur electrotechnic. Hopefully, he will manage to mend it and if not, I will surely try what you have suggested. Just one thing..don't you need a special screwdriver to get into the phone?
Thanks, Longlife
Click to expand...
Click to collapse
There are instructions on how to take the phone apart on the FTP server. Follow them carefully!
Ciao, I am Valerio.
Perhaps you can help me, I have a Magician , and I would like to connect an USB webcam to the Magician without the PC, just 1 XDA Magician and 1 extern USB webcamera.
I did not find anything on the net.
DO you think that it is possible?
Thanks in advance!
Valerio
NOone can solve it?
I am not an so expert like you xda expert, but someone could solve the problem.
I read in this forum somone reach to connect an external USB HHD to the Magician. Then I suppose that it should be possible to connect a webcam. But how? None of you are able to solve the "Rebus"?
I thought that you are "expert"
Please solve it!
if you can cook a WM6 ROM for my Magician, As a return favour, I will solve ur USB problem
It simply cannot be done.
Initially I thought you wanted to use the camera on the Magician as a webcam as you have it connected to a computer ... that can probably be done.
But you can't connect an external device to the USB port on the Magician and expect it to be able to control it. The driver doesn't exist. Not to mention, the PDA also won't be able to power the webcam through the USB port.
You have better luck if you find a BT webcam and connect it via BT instead. Still, I am not sure what the point is ... you already have a camera on the phone you can take short video clip with. If you want to do live streaming video the phone doesn't even support EDGE (only GPRS) so the data rate will never support it.
siddharta said:
I am not an so expert like you xda expert, but someone could solve the problem.
I read in this forum somone reach to connect an external USB HHD to the Magician. Then I suppose that it should be possible to connect a webcam. But how? None of you are able to solve the "Rebus"?
I thought that you are "expert"
Click to expand...
Click to collapse
Whos the "you", you are refering to? you seems to be talking to air. And, get your proof right, you can't connect a Magician to an external USB Hdd.
Oh, I'm the newbie, I can't float on air, but you the export, so must be able to float on air. I've read somewhere that people can float on water, so you must be able to float on air.
Please guys, relax a little.
The magician (as most HTC phones) do not support the USB host function. Also the USB connector is only USB client.
You can use the built-in cam for messenger on your PC though.
Or as survelliance camera is you have wifi ;O)
Lx Cam
Cheers
getting relaxed
Dear member of the group.
I read on the forum in a past post that someone connected a Magician to an HDD.
It was a replay to a post about WM2005 on Magician. Someone said that he was not able to install it but it reaches to connect an external HDD.
Anyway, answering to your posts, I would like to advise that about powering the external devices it is possible in my case because I could manifacture an ad-hoc usb cable with external power supply for the magician and the webcam.
It is "only" a driver problem or it is an hardware problem that an USB client miss some component that makes it not possible operating as host.
If It is a driver problem, perhaps some "gurus" could help us.
I tell you that I would many new very attractive feature if it would be possible.
Thanks in advance for your help.
siddharta said:
I read on the forum in a past post that someone connected a Magician to an HDD.
It was a replay to a post about WM2005 on Magician. Someone said that he was not able to install it but it reaches to connect an external HDD.
Anyway, answering to your posts, I would like to advise that about powering the external devices it is possible in my case because I could manifacture an ad-hoc usb cable with external power supply for the magician and the webcam.
It is "only" a driver problem or it is an hardware problem that an USB client miss some component that makes it not possible operating as host.
If It is a driver problem, perhaps some "gurus" could help us.
Click to expand...
Click to collapse
<rant>
I'm not quite understand about the Hdd part of your post. However, I presume you meant that this guy is not able to use the Ext-Hdd even though he has already connected to the phone, right? That's quite surprise to be that the 'connection' didn't burn off his phone. You can connect everything to anything, and the reason device designers make millions types of sockets and plugs, it to avoid users from pluggin something that arent' suppose to do so. e.g., you can modify a wire and plug your USB and plug it into a 240V AC wall out-let (DO NOT try this at home, just an example) and attempt to charge the phone from 0 to 100 in less than a minute?
</rant>
Anyway, for your question, it is a hardware problem. You'll need a host controller for any device to able to host any USB stuff. Google for it.
It can be done...
...altough not as a really usable webcam, Coolcamera can display on the pc what the CMOS is looking.
Cmq ho visto appena dopo postato ke 6 italiano, quindi te lo dico in italiano e pure piu dettagliato!! Come ho detto sopra, hai da provare Coolcamera.. Non soltanto x la funzione "webcam" (ke alla fine è una finestra sul desktop praticamente inutilizzabile, xo è figo xk puoi anke visualizzare quello ke stai facendo sul palmare!!) ma anke xk migliora drasticamente qll k potresti fare con la fotocamera.. Io ormai non la uso piu, xk x qualke motivo mi vengono fuori le bande di colori come se ne avesse solo 256 a disposizione, ma mi accontento lo stesso... ^^
I'm looking for info on hu based on this board. It seems pretty rare although I know of at least 4 "manufacturers" that use it. I'm just starting this thread to be a place holder for any knowledge or questions about it.
Personally I'd love a pinout diagram and any help getting both the USB ports to work at the same time.
I have the same issue on my 9" "Android 10" ( Oreo ) Ts7 Topway Head unit, Currently I have a touch screen issue not working in any way ( either a .bin file gone missing or a dead touch screen ) Although it was working well before something changed. Currently I can only operate it with a corded mouse and cannot get the USB posts 1 & 2 to work at the same time, to use a keyboard or test playing off a USB, or loading repair files via the 2nd USB port. When I change the port in one way or another I lose use of the initial port. I has actually browsing to see If I can use a USB hub to expand use of the one port I have access on to fix my problems, when I saw your post. Vendor has not been very useful and slow to react and in a different time zone. Have you had any luck with your unit ?
The USB of TS7 is single-channel and does not support two USB ports to work at the same time
localos said:
The USB of TS7 is single-channel and does not support two USB ports to work at the same time
Click to expand...
Click to collapse
谢谢本地人，
不幸的是，我无法翻译您提供的图片。 能否请您用文字说明您在屏幕截图中的意思。 我现在接受一次只能使用一个 USB 端口，谢谢。
Copy of a similar head unit pinout but it is obviously not the TS7 you are asking for.
Thanks for the clarification @localos. It has two physical ports and comes with two USB cables, so you'd think....!
Thanks also Chucie for the pdf. You are right, it's not the same as the TS7, but is very similar so maybe will help us figure it out.
JethroNull said:
Thanks for the clarification @localos. It has two physical ports and comes with two USB cables, so you'd think....!
Thanks also Chucie for the pdf. You are right, it's not the same as the TS7, but is very similar so maybe will help us figure it out.
Click to expand...
Click to collapse
I sent you photos of mine wired up by a local audio shop to your thread on your local DIYmobileaudio forum you asked the same question on. The mic works fine so copy mine.
localos said:
The USB of TS7 is single-channel and does not support two USB ports to work at the same time
Click to expand...
Click to collapse
Localos, are you able to help me with my Touchscreen not working. I'm getting close to ripping the whole Android system out and going back to factory crap.
Chucie said:
I sent you photos of mine wired up by a local audio shop to your thread on your local DIYmobileaudio forum you asked the same question on. The mic works fine so copy mine.
Click to expand...
Click to collapse
Yeah, thanks again, that's a huge relief for me
Chucie's pic. For future reference.
Boa tarde,
Alguem me pode ajudar?
Tenho o topway TS7 mas nao consigo entrar no modo desenvolvedor. Alguem sabe o codigo de desbloqueio? Nao tenho o manual de instruções nem o contacto do fornecedor.
Obrigado
How to conacting ts7 pc
Ahmad933 said:
How to conacting ts7 pc
Click to expand...
Click to collapse
first firmwaare pac files required. am just started work on ts7 pcb to flash but i didnt find te firmware i have 1 pac which i work
Hi there. I have the TS7 based head unit SP-7069. It Is 1 GB RAM / 16 GB FLASH. No SD card...Two USB (single link) - no buttons - no external MIC support (I have external MIC, connected instead of the internal one) and...one BAD thing - FM radio WITHOUT RDS support in the system/radio app. Problems are: only one USB working at one time - and if you have a front camera and DAB+ receiver (which I started to use due to RDS/station names etc) , only one of them is working and kill each other. You are not able to connect some USB flash with music or the phone through USB - no other USB ports.
I tried to use USB HUB, but that looks that there is no support for USB HUB in the kernel/fw implemented. (sometimes it found FLASH USB, which was connected to the HUB, but the second FLASH USB or mouse,DAB+ etc, was not recognized ((twice yes)), and the system almost every time stop working until the USB HUB was unplugged.
Does somebody know what to do for USB HUB working? Or some RDS radio app, which is working?
I have FW version:V12.1.1_20210329.133820_TW11 and if i try to use Check for update of the system, it closes the update app only...and nothing happened!
I tried to "check for updates" in the advanced menu, and it find "Current version: com.tw.carchoose_3f18_00_200408"...."Updated version: com.tw.carchoose_3f18_00_210928" and after some second it say "Download completed is being updated"....and do nothing. If I try to use the check for an update...it says the same...current 200808 and updated ver 210928....nothing changed.
Does somebody have the same radio head unit? It is not bad, but RadioApp without RDS and bad USB support is horrible. =o/.
Pauloverissimo76 said:
Boa tarde,
Alguem me pode ajudar?
Tenho o topway TS7 mas nao consigo entrar no modo desenvolvedor. Alguem sabe o codigo de desbloqueio? Nao tenho o manual de instruções nem o contacto do fornecedor.
Obrigado
Click to expand...
Click to collapse
Hi. Mostly Topway TS7 (my is SP-7069) uses 8888 for advance setup and 7890 for service setup. Sadly nobody knows the factory code for normal factory advance config... the seller told me that he does not know it too =o/
JethroNull said:
Chucie's pic. For future reference. View attachment 5413095
Click to expand...
Click to collapse
Hi. And what about the internal mic? Did you disconnect him somehow? I disconnected it and soldered the terminals to the JACK connector instead. It is working perfectly.
And sorry for the question: which FM receiver chip do you have inside your TS7? My SP-7069 has some "four in one" without RDS and I never found which type is inside that "four in one" exactly. The board inside is TOPWAY TS7-A120LP2B-V4.
If I try to check it by the system setting - there is one value: "radio: TEF..." - and nothing more... the font is too big to see the whole value it..that's mean that there is a possibility that it is: TEF6624/21 or TEF6657, TEF6686 or TEF685x - that type I am able to choose from the list, System version is V12.1.1_20210329.133820_TW11.
TS7 FIRMWARE DOWNLOAD LINK PLZ?
[email protected]_Bluereed Limited.apk
Color apk for T3L Android stereo by BLUEREED LIMITED, [email protected]
drive.google.com
Why does it come with 2 usb if only one works at a time I’m so lost
gordy1987 said:
Why does it come with 2 usb if only one works at a time I’m so lost
Click to expand...
Click to collapse
the second one is for pc-connecting