Hey guys my hd has locked it's self i can bring it out of standby but it wont unlock the touch screen.
have done 3 hard resets and it gets to the "tap screen to continue" screen but still says "unlock" in the bottom left corner.
it wont allow me to unlock it.
i am running the stock rom 6.1 on orange uk.
can anyone help?
does that corner of the screen work? what happens if you press phone? do you get the dialer? it could be that the screen doesn't work.
the soft keys doesn't work apart from the hang up key which vibrates and lights the screen. But when i touch the unlock button nothing happens. if i press the volume control i get the htc volume control as well
Well I had this problem once and only thing which worked was when I connected the phone to the power for charging and it immediately unlocked.
have you tried going into bootloader mode? if you can, then try install a new ROM...
Ok i didnt mean the soft keys. There is a option in the bottom left corner of the screen that says phone, i was wondering if you touch that corner does it work.
Also if only 1 of the soft keys are working you have a another issue as well. I would be getting in touch with orange and looking at sending it backfor now. I would flash any custom roms as this will affect the warranty. Look into keeping the warranty in tact until the issues have been resolved.
1 thing you could try is flashing the original rom again. See if you can find the orange ROM (it's on here somewhere) and reflash with this and it might solve some of the issues as this will do a little more than a ard reset will.
thanks for your feedback guys. Nothing i did made any difference so it's gone to HTC to either a: fix or b: replace. i was lucky in that i hadnt flashed any roms into it yet as i didnt wont to invalidate the warrenty and that orange being s#it, wont even let me upgrade the stock ROM. grr. will post on here when i find out what it is.
no idea what was wrong with it and they replaced the whole touch screen.
thread can be closed.
thank you
Thread closed as per request
Related
Hi,
i have a strange issue with my screen lock.
First, the new wm6.5 started unlocking in my pocket. i found out that sometimes when i pressed the screen in the upper left corner it unlocked ( so without sliding). To resolve this problem, i installed smartlock to turn back to the classic wm6 lock. This works, but the phone is still "trying to unlock" sometimes. for example, when i have my phone laying on my desk with the lock on, it sometimes out of the blue shows the unlock screen, like i pressed "unlock" . .
this is not a really big issue, but the real problem is that when I'm making a call the phone starts to lock / unlock in a rapid tempo, like its going crazy.. the only way to stop this is to do a soft reset..
I already tried a lot of different Roms, made hard-resets and reinstalled HardSPL 1.83 but nothing seems to fix this issue..
is anyone familiar with this problem and its solution?
Kees
Probably a hardware fault, go to your warranty center to have it checked.
thanks for you reply! I was afraid if this answer.. Guess I'll send it in!
this is a new problem for me. I have been using the most recent Dutty ROM together with Mdeejay Android ROM without any problems. All of a sudden, when I try to unlock the screen after STANDBY, it just wont register my touch, as if I am not touching it. It boots up fine, and on the first unlock works fine, but when the screen lock goes on again (after every standby) it just wont unlock. So I am stuck (I use Exchange and our policy forces the lock after standby, so I have to use it - and its worked fine for ages).
If I boot into Android, it works fine, the unlock works fine, yet strangely when I try to shut the power down, THAT screen also doesnt register me touching it.
I have hard reset but even before I load an app or do anything, the problem exists.
I also reflashed a DUTTY ROM. Same problem.
I tried CHT lockscreen - same issue. After Standby, screen doesnt register my touch.
Anyone have any ideas?
Same problem for me.. Restoring a backup image after being forced to hard reset this morning and now suddenly my HD2 won't wake up after sleeping. Pressing my end key only lights up my buttons but I have to pull the battery to reset. I'm thinking it's related to me having CHT installed, yours however might be a different problem.
I had something similar. It was right after I had installed CHT 2.0 and was looking to make the top and bottom bars transparent. I found a cab that claimed it would do this and installed it. Sorry, I don't recall what cab it was and I have deleted it. When I rebooted Sense would hang and if it got into a lock it would only move the slider a little where it would stop. Luckily, I had done a backup that morning right after I installed CHT 2.0 with Sprite so I restored and all was well.
I don't know if this is of help but I figured I'd throw it out there.
it wakes up, but wont register when I try to swype the unlock screen.
ekerbuddyeker said:
it wakes up, but wont register when I try to swype the unlock screen.
Click to expand...
Click to collapse
Your lucky you get that far lol.. I don't get any waking up. Plus I now uninstalled S2U2 and still no change. Disabled all locks of any kind and still frozen with sleep of death with in 1 min of hitting power to sleep it. I REALLY don't want to to a hard reset and install everything from scatch.. UGH.
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
bump this is horrid
same
im having the exact same issue. I have flashed 3 different roms and flashed to the newest radio (2.15).
I started out using energy rom, didnt help. Flashed a newer energy rom, didnt help. Now im using the dusk rom, same issue.
SOMEONE PLEASE HELP!!!!
It's a quite common digitizer problem lately... it seems the HD2's digitizer is failing on some units, possibly because of usage with android? my father's device acted the same way, only it sometimes did register touch and other times, not.
My device doesn't have these problems, yet. But seeing that a lot of people here are experiencing these issues, and with the notion that I use android pretty much all the time since I first booted my device, i'm pretty sure i'll experience it soon as well..
Make no confusion thou, the assumption that android effects the digitizer are purely my own thoughts on this matter, no such thing has been proven and the conclusion that android is effecting our HD2s is based purely on the statistics of touch screen failures in the last few months since android has been made publicly available in a working form.
EDIT:
Those seeking A solution, as far as I know, the only solution is sending your unit to HTC for repairs, you'll get it back with a note that says that they replaced your digitizer or your screen, at least these are the reports I heard from the other folks whom followed this procedure.
Good luck.
HTC HD2 Screen Lock
I have only used Android a few times on this 'phone and it has a standard HTC/O2 ROM installed so it must just be a problem with the top part of the digitiser. With android running the unlock is at the bottom and is unaffected.
Is there any way of testing the digitiser before deciding whether to get a repair sorted,
Ta,
link:
htcphones.net/htc-hd2-problems-with-touchscreen
short version :
change digitizer
ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
A friend was complaining to me about something like this since last week. I could not figure it out so I went ahead and installed Android cm7 and still have the same issue.
Until I read this post after searching through the forums all over Screen now unlocks perfectly fine but only using the green Phone icon. If I try to wake the screen with the red Power button, the screen is unresponsive.
Thanks for the info.
Already happened tome its a hardware issue can't be fixed so if you still have warranty on ur phone send it to htc for repairs b because it tends to get worse n worse soon other keys will start to give in I think that's one reason why most android phone been switching to capacitive buttons because hardware causes this sorta issues and send it in for repairs to get it fixed
Sent from my SGH-T959 using XDA App
the same issue with me , is there is any solution for that .
Wakeup the phone using the send button.it will work
Hi everyone, I got my desireZ back in November and it has been working perfect ever since, i have it rooted using VISIONary and everything was perfect until today. The phone was in my pocket and i was lsning to music, i looked at my phone and all i saw was a white line going from the top of the screen to the bottom, i pressed the power button to turn of the screen, then i pressed it again and now all I see is a black screen with the back light on.
I have tried to soft reset the phone, took out the battery sim card and left the phone for a while, came back turned it on and still the same thing black screen with the back light on... The touch screen works fine i still hear the phone receiving txt msges and emails, i can even receive phone calls, and answer them by sliding my finger across the screen like usual.
I am trying to do a hard reset of the phone but i can't do that cause even when i turn on the phone while holding the volume down key i still dont see anything on the screen
any help would be appreciated.
EDIT - after trying to open the keyboard a couple of times, now the screen turns on white... when i press the power button to turn of the screen and turn it back i see a fading effect where the screen slowly turn on from left to right (fades from black to white) and then stays white till i press the power button again....
Since i have rooted my phone, i dont belive i can take it to bell to fix it the way it is... and since i can't see the screen to perform a hard reset to remove the root (i dont have s-off) ... does anyone know of another method for doing this? maybe with connecting to a computer?
awsrasool said:
Since i have rooted my phone, i dont belive i can take it to bell to fix it the way it is... and since i can't see the screen to perform a hard reset to remove the root (i dont have s-off) ... does anyone know of another method for doing this? maybe with connecting to a computer?
Click to expand...
Click to collapse
There is another thread on the forums about someone having the same issue. I believe there is a solution using adb on your PC to connect to the phone.
Not sure how 'tight' your service provider is, but if the screen is dead, and you are still under your warranty period, they may simply swap the device for you after doing some 'basic' tests and dump it into the bucket that goes back to the factory for refurb. The fact that it is rooted won't be discovered until much later, if ever, so it may not be an issue.
Good luck!
gbarayah said:
There is another thread on the forums about someone having the same issue. I believe there is a solution using adb on your PC to connect to the phone.
Click to expand...
Click to collapse
Any idea on the location of this thread, can't find it anywhere.
I am suffering the exact symptoms as the OP with my Desire Z which is rooted with visionary rom flashed - I would really like to know how to use adb to resolve this !
Cheers,
Ste
http://forum.xda-developers.com/showthread.php?t=898486&highlight=blank+screen
http://forum.xda-developers.com/showthread.php?t=864948&highlight=blank+screen
http://forum.xda-developers.com/showthread.php?t=843578&highlight=blank+screen
http://forum.xda-developers.com/showthread.php?t=844795&highlight=blank+screen
http://forum.xda-developers.com/showthread.php?t=821229&highlight=blank+screen
..... Aint read none of em myself,.... Good luck. If you find some to be of use, report back for the others. Peace
Cheers mate, will have a good look tonight
Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks
Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards
Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.
Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.
Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.
ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please
Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.
captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.
thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.
Glad I could help, enjoy your device
Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop
Hi All, I have a problem with my HD2 I Update the radio to 2.15.50.4 and when I want to unlock the screen the touch do not respond, i back the radio 2.12.50.2 and the same thing not unlock, anyone Know what is the problem, sorry for my english and Thaks to all.
I change the Rom Too and the same thing, for reference.
Try turning it on with the green button instead of the red one. Mine was doing this, had to send it in, it's a hardware problem between the buttons and the digitizer. Needs to be replaced if it's the same problem. Seems somewhat common. Even flashing back to full stock didn't fix it, it was definitely a hardware issue for me. If you're changing roms, and it's still happening, that doesn't sound good.
Sorry for the bad news, it sucks.
Thanks Willr001, Look similar to your problem and it's the same thing, with the rest of the buttons don't have the problem, how much cost to you to fix the problem??? and thaks for your answer, thanks to you now can unlock my cell, with problem but can unlock.
I don't get how it could be the buttons if you're able to get in to MAGLDR using the power button?
The problem will keep getting worse, I think it will next stop working with the green button, mine took like 4 days from the time the red button stopped working to the green button stopping.
The red button still works fine, it just makes it so the touch screen doesn't work, so MAGLDR would still work fine.
I don't know how much it costs to fix, I'm not sure if it's the buttons, screen, or motherboard that needs to get replaced. Mine was under warranty, so they fixed for free.
HTC knows it's a defect, if you're under warranty, their service center may do it for free.
Thanks for the answer, yea the i can go MagLDR with the red button, and unlock with any other button exept the red, I will verify if si still in warranty for make the same that you, by the way do you think the posibility of change to WM 6.5 to look if the problem remain in that Rom?
You could try, when it happened to me I flashed another WM6 rom, still happened, so then I flashed the original Stock T-Mobile/HTC rom. When it still happened there, I knew it was broke. Made it easy to send back though, because I'd put the stock rom on (warranty people like to see stock roms).
i can't see this is cause by hardware failure. It seems to be a hardware buttons mapping problem so its mean just the software.
I think too that is software problem because I don't need to prees the button to block the screen, only with touch on the button without press is enought to stop function the screen, but i don't have warranty Yet, so I try to solve this for my own, I apreciate all help that you can give me.
i9m having the same problem, i fixed permission and then all buttons wont work. ill try to reinstall the rom and see if the problem will be resolved. im so depressed right now.