Thread to unlock:
http://forum.xda-developers.com/showthread.php?t=395945
I followed this and i got an error
after i tried my step one, the installation stopped at 95 and an error occured... When i tried to use the error recovery, it worked and goes back to the red, green blue screen but my activesync was not able to have a green light connection..
And when i re-run the NikiCustomRUU.exe, it is not able to detect the USB connection.. pls advice
Related
NEED HELP!!!!! ERROR 264: CONNECTION
when making update the rom of qtek 8010.
They help me please.
Debtor,
Marco Cardoso - Portugal
Same here
ANY HELP?
I figured it out!!!!!
figured it out!
I went to a blank computer and installed the T-Mobile Apps from scratch then the first thing I did after the reboot from the ActiveSync install...was rand the ROM upgrader (CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe)
....PRESTO.....
What I saw was the driver used when the phone goes into the Boot Loader screen (RED, GREEN, BLUE). It stated "USB Device" as the driver was loading in Windows XP...after it stated device ready to be used....it started!
I would suggest unistalling ActiveSync and reinstalling it from the T-Mobile Disc....this should work!
PM me if you have any problems.
Hi, my m600 does not pass bootloader, i can hard reset/soft reset, wm5 has come on once, then went to align screen but had trouble everytime, but at least it was being recognised by active sync to load No Vendor Rom. ( i tried bootmode/then run RUU, with no luck) it either says error 260 no device detected (but its in task bar as removable drive.) or when it was working for them few minutes it it would run No Vendor setup great and recognise (as active sync is working at this point) but doesnt go past 0% and then the error comes up "error 606" and then offers the recovery process. also a little note to add: the first screen when turned on, sometimes the gsm 2.x.x.x is missing?? from the top left corner.
any help would be appreciated.
So got my Dopod 838pro running windows mobile 5 and will upgrade it to windows mobile6 with any luck, at the moment im trying to upgrade the boot loader to SPL (Bootloader) version 2.10.Olipro (HardSPL v7) and im following this very handy guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
however i get to the very end where its supposed to flash the new boot loader and it sits there for a while until the updater utility comes back with ERROR [260] Update Error.
Which informs me that i should check to see if the phone is connected to the computer via usb, which it is.
It must connect to the phone cause it actually starts the process of trying to update the boot loader, i see it on my phone. It goes to a red, green and blue screen. Which says:
Herm1000
IPL-SSPL by Des
Herm100
SPL-1.09.ds
USB
The only option i have here is to press exit on the updater utility, and start again.
Nothing else happends after this.
Im running Windows Vista 64bit, have also tryed this guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Still no solution.
Currently i have:
IPL 1.01
SPL 1.06
Have also restarted my computer in between trying different things.
Anyone ever had this problem or know a fix?
Thanks in advance.
error 260 is an open port error. try a different usb port, disable antivirus and firewalls, or if avaiable try on a different pc, xp if possible.
heh, works on my XP machine.... >< Thanks.
Edit:
I tried a differeny USB port on my vista machine and that didnt work. I also closed absolutely everything and that didnt work either.
PLZ help !!
I searched and I tried everything
disabling antivirus, and Windows Firewall , Restarting PC and PPC.
But still giving me the same error.
I update it to Diamond and it's now sticking on boot picture showing diamond with qoute under it " ITs Popa Black Diamond"
and when I press reset soft + Camera button + Power button then shows me Green and Red And Blue screen
I started the ROMUpdateUtility with Rom
after a while shows me this error
UPDATE ERROR 262
Plz Help
This thread should help (it's an Activesync issue).
I didn't know he made Vogue ROMs......
I had a similar problem. I have wanted to update mine ROM. I have downloaded new ROM and Unlocker and used How To Unlock Your Phone And Flash A Custom Rom And Relock Your Vogue (Written by Detroit_Doug). There it is written that the first needed to start RomUpdateUtility.exe, I have made as have been written and then as I did not try I all time had an error 262. When I already used all variants and have helped nothing. Then I have found in a folder with taken Unlocker file Vogue_unlocker.bat. After its start I followed instructions on the screen and all has passed smoothly. Phone has been successfully unblocked and flashed.
Hello, please can you help me! I only had my PDA repaired a couple of days ago, i needed to unlock it and i used your intructions for unlocking the XDA II but it did not work.
After following your instructions and opening the program xda2unlock and typing "yes" the program came up with the message:
"ERROR: OpenComport \\.\WCEUSBSH001 - the system cannot find the file specified"
The PDA is showing "serial v1.06" and "usb v1.06 when in cradle, it wont do anything like before i had to get it "reflashed" by the company.
What can i do??
Thank you!!
Nieko
connect it to usb and falsh a rom on it
the wifi and the readme of the rom file describe step by step how you do it
Struck on Serial
I do have the same problem. What would be the best ROM plz. All the ROMs I downloaded gives error as "102 Image File Checksum Error" or Language ID Error". Pls give me a good link for a working ROM.