i've had wm6.1 4 a while and the problem was that whenever i try to switch on wifi from the comm manager that round working hourglass shows and then it doesnt turn on , i dunno what happens but the symbol of wlan with the little x on it are still the same
i downgraded back to wm5 2.26 and the same problem then i installed the official T-mobile 3.08 rom and still the same problem
worthy to mention that the official ruu didnt work wz error 326 so i had to extract the nk.nbf and cook the rom again and it worked
does this mean that my wlan hardware is faulty ?
or is it a software problem ?
does anyone have the same problem? can u plz help me ?
i searched all aroud the forum and i tried to hard reset my t-mobile vario several times and still doesnt work
I'm having the same issue with my acer f900. The wifi has been sporadic, and doesn't seem to turn on with comm manager. When you go to settings/connections/wifi all you get is a configure network adapters page. All of the the settings seem to be correct, but it doesn't show any wireless networks.
the whhole forum is full of this such a questions just flash to another rom
erikvario said:
the whhole forum is full of this such a questions just flash to another rom
Click to expand...
Click to collapse
well i've tried that hundreds of times , it just doesnt do the trick still dont have wifi
Related
Hello,
I am unable to connect with my TYTN to any wifi network, secured/unsecured. After turning wifi on (in comm manager), those lines near wifi icon (indicating that device is searching for wifi networks) appears just for 1sec, and then disappears. And that is all...
Please is there any known solution or is my wifi really dead?
My ROM: Schap's 4.31 (I already tried different ROM without any luck)
My Radio: 1.50.00.00
Thank for any answer...
Does your MAC address show ok? It may be worth having a look at this thread.
http://forum.xda-developers.com/showthread.php?t=322225
many thanks, but my TYTN is now bricketized :-(
downgrading to SPL 1.10 ok, but
while downgrading SPL (to 1.04), after message of succesfully flash on PC screen - PDA display turned off and my TYTN stops responding completely...
authorized service is my only last chance...
Sorry to hear it bricked. You could try this which has been recommended by another member before.
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
here
VC_48 said:
Hello,
I am unable to connect with my TYTN to any wifi network, secured/unsecured. After turning wifi on (in comm manager), those lines near wifi icon (indicating that device is searching for wifi networks) appears just for 1sec, and then disappears. And that is all...
Please is there any known solution or is my wifi really dead?
My ROM: Schap's 4.31 (I already tried different ROM without any luck)
My Radio: 1.50.00.00
Thank for any answer...
Click to expand...
Click to collapse
dont know if you already installed these ?
i hope it helps for you..
Pinguin666 said:
dont know if you already installed these ?
i hope it helps for you..
Click to expand...
Click to collapse
What does that .cab do?
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191
Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx
what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?
Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.
Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint
Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken
Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards
Flash original ROM with downgrading radio to 0.88
Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards
Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...
oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...
Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it
bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu
Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.
Hi everyone i was wondering if anyone could help me... i have several questions about my htc touch elf see i just upgraded it to the onyx 4.something version and after 4 days the wifi stoped working it wont turn on and it wont detect my sd card either... i was wondering if anyone could help me on how to degrade it to a better ROM or anything cause when i try to degrade the onyx 4.something to 3.0 it says it cant establish a conection between the phone and the computer when i run the romupgradeutlity and when i hit the upgradeimage buttom... ... please help me.. thanks a lot!
post in Onyx ROM thread and read the stickies.
Your Elf Device, Our Vogue Device
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
rasv19 said:
Hello I was wondering if anyone could help me... i have an htc touch elf and i upgraded it to the Onyx 4.0 after 4 days of use it started giving me some trouble sometimes i hitted the touch screen and it opened something else , my wifi stoped working it wont turn on and it wont detect my micro SD... i tried downgrading to Onyx 3.0 through ROMupdateutility but when it was at 0% it said it coudlnt detect the mobile device... i was wondering if anyone could help me fix this problem cause i want my phones wifi to work and micro sd too. thanks a lot.
Click to expand...
Click to collapse
please try a hard reset, that should help solve the problems.
i doubt if this is anything to do with ROM you flashed (since you have flashed successfully, as your phone does boot.
if none of this works please post.
a hard reset should help you though.
rasv19 said:
nope it didnt worked my phones wifi still not working and its not detecting my sd card.... like wheneve ri turn blutooth on the wifi green light turns on with it but the wifi wont turn on itself and then when i go to the music thing on my phone it detects the first song i have but when i play it says theres no files and the sd card wont show up on the file explorer.... and other thing when i try upgrading or downgrading my phone by romupgrade utility i get the error 222 canot eswtablish conections between your pda and computer check usb cable.... so i dont know cause the first time i upgraded it from the manufacture ROM to the onyx 4.somethhing it went pretty great..
Click to expand...
Click to collapse
i see, error222.
please make sure that your USB cable is working.
pleasemake sure your computer has active sync 4.5 installed ( if windows XP)
or the latest WMDC (if vista or win7 )
also regarding the memory card, are u sure the card is fine ?
please put it another device/card reader and check, try formatting it and see if ur elf detects it.
ROMs usually don't have anything to do with memory drivers.
what HSPL/USPL did u flash ?
Prowess said:
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
Click to expand...
Click to collapse
You posted in the Vogue section. I have transferred your thread to the Elf section.
yeah it works on other devices.... the usb cable is working really fine and i dont know what uspl i flashed .. . like i mean everything went rite until 4 days after i instaled the onyx 4.0 ultimate everything was working fine with it but 4 days later it started to give me that problem ... and i try to change ROM but i cant it wont let me i run active sync andeveyrthing it says its conected i run the romupdateutiliy then the status bar opens up but it stays at 0% and then the error 222 shows up... but my phone goes to the bootloader but it wont pass from there.. and when i close the romupdateutility my phone switches to the status bar but stays in 0% and then my phone crashes and i have to unbrick it.
first of all please do not open 3 different threads for the same problem, i have removed the other two.
also as aman said try posting in the the rom thread.
please read thee thread which have been stickied on the ROM development thread.
please be patient
thanks for your co-orperation.
well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?
Hello! I have a Nike 100. I had recently changed the original rom with a new one. I didnt have any problems till recently it stopped working on usb mode. Even if i try to put it in bootloader it still isnt recognized.. even though its charging normaly... I thought the problem was in the cooked rom for some reason and i tryed following the info on the forum to install a new one using the microsd and but it doesnt find it.. althougth when u look with file explorer on the cooked rom it finds it correctly.. i sync it with bluetooth since it doesnt work in another way.. Any Ideas are welcome! Thanx in advance..